From: Jimmy Hon <honyuenkwun@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-rockchip@lists.infradead.org, Ondrej Jirman <megi@xff.cz>,
Jimmy Hon <honyuenkwun@gmail.com>
Subject: [PATCH 14/15] arm64: dts: rockchip: analog audio on opi5max
Date: Sat, 26 Oct 2024 04:48:30 -0500 [thread overview]
Message-ID: <20241026100310.52679-15-honyuenkwun@gmail.com> (raw)
In-Reply-To: <20241026100310.52679-1-honyuenkwun@gmail.com>
Analog audio using es8388 codec via the headset jack and onboard mic for
the Orange Pi 5 Max
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
---
.../dts/rockchip/rk3588-orangepi-5-max.dts | 74 +++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
index dc5de21cddd1..b98514ea62d1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts
@@ -36,6 +36,47 @@ button-maskrom {
};
};
+ amp_audio: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ /* PHONE_CTL */
+ enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,name = "rockchip,es8388";
+ simple-audio-card,aux-devs = <&_audio>;
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ /*TODO: SARADC_VIN3_HP_HOOK is used as MIC detection / key input */
+
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0_8ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 70 75 80 100>;
@@ -259,6 +300,33 @@ hym8563: rtc@51 {
};
};
+&i2c7 {
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388";
+ reg = <0x11>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ AVDD-supply = <&vcc_3v3_s0>;
+ DVDD-supply = <&vcc_1v8_s0>;
+ HPVDD-supply = <&vcc_3v3_s0>;
+ PVDD-supply = <&vcc_1v8_s0>;
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+};
+
/* phy2 */
&pcie2x1l1 {
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
@@ -283,6 +351,12 @@ hym8563_int: hym8563-int {
};
};
+ sound {
+ hp_detect: hp-detect {
+ rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb {
usb_host_pwren: usb-host-pwren {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.47.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-10-26 10:04 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-26 9:48 [PATCH v1 0/15] arm64: dts: rockchip: Add Orange Pi 5 Max board Jimmy Hon
2024-10-26 9:48 ` [PATCH 01/15] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max Jimmy Hon
2024-10-26 17:58 ` Krzysztof Kozlowski
2024-10-26 9:48 ` [PATCH 02/15] arm64: dts: rockchip: Add Orange Pi 5 Max board Jimmy Hon
2024-10-26 9:48 ` [PATCH 03/15] arm64: dts: rockchip: add status LED to opi5max Jimmy Hon
2024-10-26 17:59 ` Krzysztof Kozlowski
2024-10-26 20:17 ` Jimmy Hon
2024-10-27 19:45 ` Krzysztof Kozlowski
2024-10-26 9:48 ` [PATCH 04/15] arm64: dts: rockchip: Enable RTC support for opi5max Jimmy Hon
2024-10-26 9:48 ` [PATCH 05/15] arm64: dts: rockchip: add PCIe network controller to opi5max Jimmy Hon
2024-10-26 20:29 ` Jimmy Hon
2024-10-26 9:48 ` [PATCH 06/15] arm64: dts: rockchip: add PCIe for M.2 M-key " Jimmy Hon
2024-10-26 9:48 ` [PATCH 07/15] arm64: dts: rockchip: add fan support " Jimmy Hon
2024-10-26 9:48 ` [PATCH 08/15] arm64: dts: rockchip: add USB2 " Jimmy Hon
2024-10-26 9:48 ` [PATCH 09/15] arm64: dts: rockchip: add lower USB3 port " Jimmy Hon
2024-10-26 20:40 ` Jimmy Hon
2024-10-26 20:49 ` Jimmy Hon
2024-10-26 9:48 ` [PATCH 10/15] arm64: dts: rockchip: add upper " Jimmy Hon
2024-10-26 9:48 ` [PATCH 11/15] arm64: dts: rockchip: Enable GPU on opi5max Jimmy Hon
2024-10-26 9:48 ` [PATCH 12/15] arm64: dts: rockchip: add SFC support for opi5max Jimmy Hon
2024-10-26 9:48 ` [PATCH 13/15] arm64: dts: rockchip: ADC button " Jimmy Hon
2024-10-26 9:48 ` Jimmy Hon [this message]
2024-10-26 9:48 ` [PATCH 15/15] arm64: dts: rockchip: Enable HDMI0 on opi5max Jimmy Hon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241026100310.52679-15-honyuenkwun@gmail.com \
--to=honyuenkwun@gmail.com \
--cc=conor+dt@kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=megi@xff.cz \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox