Linux RTC
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: "Michael Büsch" <m@bues.ch>
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>,
	rtc-linux@googlegroups.com
Subject: [rtc-linux] Re: [PATCH 0/6] rtc-rv3029: Add trickle charger
Date: Fri, 4 Mar 2016 20:39:36 +0100	[thread overview]
Message-ID: <20160304193936.GA2970@piout.net> (raw)
In-Reply-To: <20160304200256.2d56c790@wiggum>

On 04/03/2016 at 20:02:56 +0100, Michael B=C3=BCsch wrote :
> This series eventually adds support for the trickle charger mechanism
> to the MicroCrystal rv3029 RTC driver.
>=20
> This series includes the changes from the first review round.
> The tricke charger functionality was verified on a rv3029 connected to
> a RaspberryPi. The resistance between VCC and the battery pin was
> measured for some 'trickle-resistor-ohms' settings.
>=20
> The series is also available in this git repository:
>=20

This is mostly good. I still have two small comments.

--=20
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

--=20
--=20
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---=20
You received this message because you are subscribed to the Google Groups "=
rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

  reply	other threads:[~2016-03-04 19:39 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-01 20:33 [rtc-linux] [PATCH] rtc-rv3029c2: Add trickle charger Michael Büsch
2016-03-01 21:36 ` [rtc-linux] " Alexandre Belloni
2016-03-01 21:54   ` Michael Büsch
2016-03-01 23:07     ` Alexandre Belloni
2016-03-02  6:26       ` Michael Büsch
2016-03-02 12:00         ` Alexandre Belloni
     [not found]           ` <20160304195337.51439645@wiggum>
2016-03-04 18:54             ` [rtc-linux] [PATCH 1/6] rtc-rv3029: Remove all 'C2' suffixes from identifiers Michael Büsch
2016-03-04 21:38               ` [rtc-linux] [PATCH v3 " Michael Büsch
2016-03-04 18:55             ` [rtc-linux] [PATCH 2/6] rtc-rv3029: Add "rv3029" I2C device id Michael Büsch
2016-03-04 21:39               ` [rtc-linux] [PATCH v3 " Michael Büsch
2016-03-04 18:55             ` [rtc-linux] [PATCH 3/6] rtc-rv3029: Add missing register definitions Michael Büsch
2016-03-04 21:39               ` [rtc-linux] [PATCH v3 " Michael Büsch
2016-03-04 18:56             ` [rtc-linux] [PATCH 4/6] rtc-rv3029: Add i2c register update-bits helper Michael Büsch
2016-03-04 19:42               ` [rtc-linux] " Alexandre Belloni
2016-03-04 19:46                 ` Michael Büsch
2016-03-04 21:40               ` [rtc-linux] [PATCH v3 " Michael Büsch
2016-03-04 18:56             ` [rtc-linux] [PATCH 5/6] rtc-rv3029: Add functions for EEPROM access Michael Büsch
2016-03-04 21:40               ` [rtc-linux] [PATCH v3 " Michael Büsch
2016-03-04 18:56             ` [rtc-linux] [PATCH 6/6] rtc-rv3029: Add device tree property for trickle charger Michael Büsch
2016-03-04 19:43               ` [rtc-linux] " Alexandre Belloni
2016-03-04 19:49                 ` Michael Büsch
2016-03-04 19:58                   ` Alexandre Belloni
2016-03-04 21:41               ` [rtc-linux] [PATCH v3 " Michael Büsch
2016-03-04 19:02           ` [rtc-linux] [PATCH 0/6] rtc-rv3029: Add " Michael Büsch
2016-03-04 19:39             ` Alexandre Belloni [this message]
2016-03-04 21:36             ` [rtc-linux] [PATCH v3 " Michael Büsch
2016-03-05  5:23               ` [rtc-linux] " Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160304193936.GA2970@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=gregory.hermant@calao-systems.com \
    --cc=m@bues.ch \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox