From: Pierre Morel <pmorel@linux.ibm.com>
To: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, frankja@linux.ibm.com,
david@redhat.com, thuth@redhat.com, cohuck@redhat.com
Subject: [kvm-unit-tests PATCH v6 09/10] s390x: css: ssch/tsch with sense and interrupt
Date: Fri, 24 Apr 2020 12:45:51 +0200 [thread overview]
Message-ID: <1587725152-25569-10-git-send-email-pmorel@linux.ibm.com> (raw)
In-Reply-To: <1587725152-25569-1-git-send-email-pmorel@linux.ibm.com>
We add a new css_lib file to contain the I/O function we may
share with different tests.
First function is the subchannel_enable() function.
When a channel is enabled we can start a SENSE_ID command using
the SSCH instruction to recognize the control unit and device.
This tests the success of SSCH, the I/O interruption and the TSCH
instructions.
The test expects a device with a control unit type of 0xC0CA as the
first subchannel of the CSS.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
---
lib/s390x/asm/arch_def.h | 1 +
lib/s390x/css.h | 20 ++++++
lib/s390x/css_lib.c | 55 +++++++++++++++
s390x/Makefile | 1 +
s390x/css.c | 149 +++++++++++++++++++++++++++++++++++++++
5 files changed, 226 insertions(+)
create mode 100644 lib/s390x/css_lib.c
diff --git a/lib/s390x/asm/arch_def.h b/lib/s390x/asm/arch_def.h
index e04866c..7a63ab7 100644
--- a/lib/s390x/asm/arch_def.h
+++ b/lib/s390x/asm/arch_def.h
@@ -10,6 +10,7 @@
#ifndef _ASM_S390X_ARCH_DEF_H_
#define _ASM_S390X_ARCH_DEF_H_
+#define PSW_MASK_IO 0x0200000000000000UL
#define PSW_MASK_EXT 0x0100000000000000UL
#define PSW_MASK_DAT 0x0400000000000000UL
#define PSW_MASK_SHORT_PSW 0x0008000000000000UL
diff --git a/lib/s390x/css.h b/lib/s390x/css.h
index 9417541..f278d0b 100644
--- a/lib/s390x/css.h
+++ b/lib/s390x/css.h
@@ -97,6 +97,19 @@ struct irb {
uint32_t emw[8];
} __attribute__ ((aligned(4)));
+#define CCW_CMD_SENSE_ID 0xe4
+#define PONG_CU 0xc0ca
+struct senseid {
+ /* common part */
+ uint8_t reserved; /* always 0x'FF' */
+ uint16_t cu_type; /* control unit type */
+ uint8_t cu_model; /* control unit model */
+ uint16_t dev_type; /* device type */
+ uint8_t dev_model; /* device model */
+ uint8_t unused; /* padding byte */
+ uint8_t padding[256 - 10]; /* Extra padding for CCW */
+} __attribute__ ((aligned(4))) __attribute__ ((packed));
+
/* CSS low level access functions */
static inline int ssch(unsigned long schid, struct orb *addr)
@@ -254,4 +267,11 @@ static inline struct ccw *dump_ccw(struct ccw *cp)
return NULL;
}
#endif /* DEBUG_CSS */
+
+#define SID_ONE 0x00010000
+
+/* Library functions */
+int enable_subchannel(unsigned int sid);
+int start_ccw1_chain(unsigned int sid, struct ccw1 *ccw);
+
#endif
diff --git a/lib/s390x/css_lib.c b/lib/s390x/css_lib.c
new file mode 100644
index 0000000..80b9359
--- /dev/null
+++ b/lib/s390x/css_lib.c
@@ -0,0 +1,55 @@
+/*
+ * Channel subsystem library functions
+ *
+ * Copyright (c) 2020 IBM Corp.
+ *
+ * Authors:
+ * Pierre Morel <pmorel@linux.ibm.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2.
+ */
+#include <stdint.h>
+#include <stddef.h>
+#include <css.h>
+
+int enable_subchannel(unsigned int sid)
+{
+ struct schib schib;
+ struct pmcw *pmcw = &schib.pmcw;
+ int try_count = 5;
+ int cc;
+
+ if (!(sid & SID_ONE))
+ return -1;
+
+ cc = stsch(sid, &schib);
+ if (cc)
+ return -cc;
+
+ do {
+ pmcw->flags |= PMCW_ENABLE;
+
+ cc = msch(sid, &schib);
+ if (cc)
+ return -cc;
+
+ cc = stsch(sid, &schib);
+ if (cc)
+ return -cc;
+
+ } while (!(pmcw->flags & PMCW_ENABLE) && --try_count);
+
+ return try_count;
+}
+
+int start_ccw1_chain(unsigned int sid, struct ccw1 *ccw)
+{
+ struct orb orb;
+
+ orb.intparm = sid;
+ orb.ctrl = ORB_F_INIT_IRQ|ORB_F_FORMAT|ORB_F_LPM_DFLT;
+ orb.cpa = (unsigned int) (unsigned long)ccw;
+
+ return ssch(sid, &orb);
+}
diff --git a/s390x/Makefile b/s390x/Makefile
index baebf18..166cb5c 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -53,6 +53,7 @@ cflatobjs += lib/s390x/interrupt.o
cflatobjs += lib/s390x/mmu.o
cflatobjs += lib/s390x/smp.o
cflatobjs += lib/s390x/css_dump.o
+cflatobjs += lib/s390x/css_lib.o
OBJDIRS += lib/s390x
diff --git a/s390x/css.c b/s390x/css.c
index fa068bf..b9dbf01 100644
--- a/s390x/css.c
+++ b/s390x/css.c
@@ -20,9 +20,26 @@
#include <css.h>
#define SID_ONE 0x00010000
+#define PSW_PRG_MASK (PSW_MASK_EA | PSW_MASK_BA)
+
+#define PONG_CU_TYPE 0xc0ca
+
+struct lowcore *lowcore = (void *)0x0;
static struct schib schib;
static int test_device_sid;
+#define NUM_CCW 100
+static struct ccw1 ccw[NUM_CCW];
+static struct irb irb;
+static struct senseid senseid;
+
+static void set_io_irq_subclass_mask(uint64_t const new_mask)
+{
+ asm volatile (
+ "lctlg %%c6, %%c6, %[source]\n"
+ : /* No outputs */
+ : [source] "R" (new_mask));
+}
static void test_enumerate(void)
{
@@ -115,12 +132,143 @@ static void test_enable(void)
report(1, "Tested");
}
+static void enable_io_isc(void)
+{
+ /* Let's enable all ISCs for I/O interrupt */
+ set_io_irq_subclass_mask(0x00000000ff000000);
+}
+
+static void irq_io(void)
+{
+ int ret = 0;
+ char *flags;
+ int sid;
+
+ report_prefix_push("Interrupt");
+ /* Lowlevel set the SID as interrupt parameter. */
+ if (lowcore->io_int_param != test_device_sid) {
+ report(0,
+ "Bad io_int_param: %x expected %x",
+ lowcore->io_int_param, test_device_sid);
+ goto pop;
+ }
+ report_prefix_pop();
+
+ report_prefix_push("tsch");
+ sid = lowcore->subsys_id_word;
+ ret = tsch(sid, &irb);
+ switch (ret) {
+ case 1:
+ dump_irb(&irb);
+ flags = dump_scsw_flags(irb.scsw.ctrl);
+ report(0,
+ "I/O interrupt, but sch not status pending: %s", flags);
+ break;
+ case 2:
+ report(0, "TSCH returns unexpected CC 2");
+ break;
+ case 3:
+ report(0, "Subchannel %08x not operational", sid);
+ break;
+ case 0:
+ /* Stay humble on success */
+ break;
+ }
+pop:
+ report_prefix_pop();
+ lowcore->io_old_psw.mask &= ~PSW_MASK_WAIT;
+}
+
+static int start_subchannel(int code, void *data, int count)
+{
+ int ret;
+
+ report_prefix_push("start_senseid");
+ /* Build the CCW chain with a single CCW */
+ ccw[0].code = code;
+ ccw[0].flags = 0; /* No flags need to be set */
+ ccw[0].count = count;
+ ccw[0].data_address = (int)(unsigned long)data;
+
+ ret = start_ccw1_chain(test_device_sid, ccw);
+ if (ret) {
+ report(0, "start_ccw_chain failed ret=%d", ret);
+ report_prefix_pop();
+ return 0;
+ }
+ report_prefix_pop();
+ return 1;
+}
+
+/*
+ * test_sense
+ * Pre-requisits:
+ * - We need the QEMU PONG device as the first recognized
+ * device by the enumeration.
+ * - ./s390x-run s390x/css.elf -device ccw-pong,cu_type=0xc0ca
+ */
+static void test_sense(void)
+{
+ int ret;
+
+ if (!test_device_sid) {
+ report_skip("No device");
+ return;
+ }
+
+ ret = enable_subchannel(test_device_sid);
+ if (ret < 0) {
+ report(0,
+ "Could not enable the subchannel: %08x",
+ test_device_sid);
+ return;
+ }
+
+ ret = register_io_int_func(irq_io);
+ if (ret) {
+ report(0, "Could not register IRQ handler");
+ goto unreg_cb;
+ }
+
+ lowcore->io_int_param = 0;
+
+ ret = start_subchannel(CCW_CMD_SENSE_ID, &senseid, sizeof(senseid));
+ if (!ret) {
+ report(0, "start_senseid failed");
+ goto unreg_cb;
+ }
+
+ wfi(PSW_MASK_IO);
+
+ if (lowcore->io_int_param != test_device_sid) {
+ report(0,
+ "No interrupts. io_int_param: expect 0x%08x, got 0x%08x",
+ test_device_sid, lowcore->io_int_param);
+ goto unreg_cb;
+ }
+
+ report_info("reserved %02x cu_type %04x cu_model %02x dev_type %04x dev_model %02x",
+ senseid.reserved, senseid.cu_type, senseid.cu_model,
+ senseid.dev_type, senseid.dev_model);
+
+ if (senseid.cu_type == PONG_CU)
+ report(1, "cu_type: expect 0x%04x got 0x%04x",
+ PONG_CU_TYPE, senseid.cu_type);
+ else
+ report(0, "cu_type: expect 0x%04x got 0x%04x",
+ PONG_CU_TYPE, senseid.cu_type);
+
+unreg_cb:
+ unregister_io_int_func(irq_io);
+}
+
static struct {
const char *name;
void (*func)(void);
} tests[] = {
{ "enumerate (stsch)", test_enumerate },
{ "enable (msch)", test_enable },
+ { "sense (ssch/tsch)", test_sense },
{ NULL, NULL }
};
@@ -129,6 +277,7 @@ int main(int argc, char *argv[])
int i;
report_prefix_push("Channel Subsystem");
+ enable_io_isc();
for (i = 0; tests[i].name; i++) {
report_prefix_push(tests[i].name);
tests[i].func();
--
2.25.1
next prev parent reply other threads:[~2020-04-24 10:46 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 10:45 [kvm-unit-tests PATCH v6 00/10] s390x: Testing the Channel Subsystem I/O Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 01/10] s390x: saving regs for interrupts Pierre Morel
2020-04-27 8:59 ` David Hildenbrand
2020-04-27 10:50 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 02/10] s390x: Use PSW bits definitions in cstart Pierre Morel
2020-04-27 9:01 ` David Hildenbrand
2020-04-28 8:10 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 03/10] s390x: Move control register bit definitions and add AFP to them Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 04/10] s390x: interrupt registration Pierre Morel
2020-05-14 11:58 ` Cornelia Huck
2020-05-15 6:57 ` Pierre Morel
2020-05-15 7:57 ` David Hildenbrand
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 05/10] s390x: Library resources for CSS tests Pierre Morel
2020-05-14 12:03 ` Cornelia Huck
2020-05-15 7:02 ` Pierre Morel
2020-05-15 7:11 ` Cornelia Huck
2020-05-15 7:14 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 06/10] s390x: css: stsch, enumeration test Pierre Morel
2020-04-27 13:06 ` Janosch Frank
2020-04-28 8:17 ` Pierre Morel
2020-05-14 12:05 ` Cornelia Huck
2020-05-15 7:05 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 07/10] s390x: css: msch, enable test Pierre Morel
2020-04-27 13:11 ` Janosch Frank
2020-04-28 8:27 ` Pierre Morel
2020-05-14 12:08 ` Cornelia Huck
2020-05-15 7:11 ` Pierre Morel
2020-05-15 8:25 ` Cornelia Huck
2020-05-15 8:53 ` Janosch Frank
2020-05-15 11:34 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 08/10] s390x: define wfi: wait for interrupt Pierre Morel
2020-04-27 12:59 ` Janosch Frank
2020-04-28 8:44 ` Pierre Morel
2020-04-28 9:20 ` Janosch Frank
2020-04-28 9:27 ` Pierre Morel
2020-04-24 10:45 ` Pierre Morel [this message]
2020-05-14 12:24 ` [kvm-unit-tests PATCH v6 09/10] s390x: css: ssch/tsch with sense and interrupt Cornelia Huck
2020-05-15 7:37 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 10/10] s390x: css: ping pong Pierre Morel
2020-04-27 13:14 ` Janosch Frank
2020-04-28 8:50 ` Pierre Morel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1587725152-25569-10-git-send-email-pmorel@linux.ibm.com \
--to=pmorel@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox