From: Pierre Morel <pmorel@linux.ibm.com>
To: kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, frankja@linux.ibm.com,
david@redhat.com, thuth@redhat.com, cohuck@redhat.com
Subject: [kvm-unit-tests PATCH v6 02/10] s390x: Use PSW bits definitions in cstart
Date: Fri, 24 Apr 2020 12:45:44 +0200 [thread overview]
Message-ID: <1587725152-25569-3-git-send-email-pmorel@linux.ibm.com> (raw)
In-Reply-To: <1587725152-25569-1-git-send-email-pmorel@linux.ibm.com>
This patch defines the PSW bits EA/BA used to initialize the PSW masks
for exceptions.
Since some PSW mask definitions exist already in arch_def.h we add these
definitions there.
We move all PSW definitions together and protect assembler code against
C syntax.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
---
lib/s390x/asm/arch_def.h | 16 ++++++++++++----
s390x/cstart64.S | 15 ++++++++-------
2 files changed, 20 insertions(+), 11 deletions(-)
diff --git a/lib/s390x/asm/arch_def.h b/lib/s390x/asm/arch_def.h
index 15a4d49..c54409a 100644
--- a/lib/s390x/asm/arch_def.h
+++ b/lib/s390x/asm/arch_def.h
@@ -10,15 +10,22 @@
#ifndef _ASM_S390X_ARCH_DEF_H_
#define _ASM_S390X_ARCH_DEF_H_
+#define PSW_MASK_EXT 0x0100000000000000UL
+#define PSW_MASK_DAT 0x0400000000000000UL
+#define PSW_MASK_SHORT_PSW 0x0008000000000000UL
+#define PSW_MASK_PSTATE 0x0001000000000000UL
+#define PSW_MASK_BA 0x0000000080000000UL
+#define PSW_MASK_EA 0x0000000100000000UL
+
+#define PSW_EXCEPTION_MASK (PSW_MASK_EA | PSW_MASK_BA)
+#define PSW_RESET_MASK (PSW_EXCEPTION_MASK | PSW_MASK_SHORT_PSW)
+
+#ifndef __ASSEMBLER__
struct psw {
uint64_t mask;
uint64_t addr;
};
-#define PSW_MASK_EXT 0x0100000000000000UL
-#define PSW_MASK_DAT 0x0400000000000000UL
-#define PSW_MASK_PSTATE 0x0001000000000000UL
-
#define CR0_EXTM_SCLP 0X0000000000000200UL
#define CR0_EXTM_EXTC 0X0000000000002000UL
#define CR0_EXTM_EMGC 0X0000000000004000UL
@@ -297,4 +304,5 @@ static inline uint32_t get_prefix(void)
return current_prefix;
}
+#endif /* __ASSEMBLER */
#endif
diff --git a/s390x/cstart64.S b/s390x/cstart64.S
index ba2e67c..e394b3a 100644
--- a/s390x/cstart64.S
+++ b/s390x/cstart64.S
@@ -12,6 +12,7 @@
*/
#include <asm/asm-offsets.h>
#include <asm/sigp.h>
+#include <asm/arch_def.h>
.section .init
@@ -225,19 +226,19 @@ svc_int:
.align 8
reset_psw:
- .quad 0x0008000180000000
+ .quad PSW_RESET_MASK
initial_psw:
- .quad 0x0000000180000000, clear_bss_start
+ .quad PSW_EXCEPTION_MASK, clear_bss_start
pgm_int_psw:
- .quad 0x0000000180000000, pgm_int
+ .quad PSW_EXCEPTION_MASK, pgm_int
ext_int_psw:
- .quad 0x0000000180000000, ext_int
+ .quad PSW_EXCEPTION_MASK, ext_int
mcck_int_psw:
- .quad 0x0000000180000000, mcck_int
+ .quad PSW_EXCEPTION_MASK, mcck_int
io_int_psw:
- .quad 0x0000000180000000, io_int
+ .quad PSW_EXCEPTION_MASK, io_int
svc_int_psw:
- .quad 0x0000000180000000, svc_int
+ .quad PSW_EXCEPTION_MASK, svc_int
initial_cr0:
/* enable AFP-register control, so FP regs (+BFP instr) can be used */
.quad 0x0000000000040000
--
2.25.1
next prev parent reply other threads:[~2020-04-24 10:46 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 10:45 [kvm-unit-tests PATCH v6 00/10] s390x: Testing the Channel Subsystem I/O Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 01/10] s390x: saving regs for interrupts Pierre Morel
2020-04-27 8:59 ` David Hildenbrand
2020-04-27 10:50 ` Pierre Morel
2020-04-24 10:45 ` Pierre Morel [this message]
2020-04-27 9:01 ` [kvm-unit-tests PATCH v6 02/10] s390x: Use PSW bits definitions in cstart David Hildenbrand
2020-04-28 8:10 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 03/10] s390x: Move control register bit definitions and add AFP to them Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 04/10] s390x: interrupt registration Pierre Morel
2020-05-14 11:58 ` Cornelia Huck
2020-05-15 6:57 ` Pierre Morel
2020-05-15 7:57 ` David Hildenbrand
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 05/10] s390x: Library resources for CSS tests Pierre Morel
2020-05-14 12:03 ` Cornelia Huck
2020-05-15 7:02 ` Pierre Morel
2020-05-15 7:11 ` Cornelia Huck
2020-05-15 7:14 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 06/10] s390x: css: stsch, enumeration test Pierre Morel
2020-04-27 13:06 ` Janosch Frank
2020-04-28 8:17 ` Pierre Morel
2020-05-14 12:05 ` Cornelia Huck
2020-05-15 7:05 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 07/10] s390x: css: msch, enable test Pierre Morel
2020-04-27 13:11 ` Janosch Frank
2020-04-28 8:27 ` Pierre Morel
2020-05-14 12:08 ` Cornelia Huck
2020-05-15 7:11 ` Pierre Morel
2020-05-15 8:25 ` Cornelia Huck
2020-05-15 8:53 ` Janosch Frank
2020-05-15 11:34 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 08/10] s390x: define wfi: wait for interrupt Pierre Morel
2020-04-27 12:59 ` Janosch Frank
2020-04-28 8:44 ` Pierre Morel
2020-04-28 9:20 ` Janosch Frank
2020-04-28 9:27 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 09/10] s390x: css: ssch/tsch with sense and interrupt Pierre Morel
2020-05-14 12:24 ` Cornelia Huck
2020-05-15 7:37 ` Pierre Morel
2020-04-24 10:45 ` [kvm-unit-tests PATCH v6 10/10] s390x: css: ping pong Pierre Morel
2020-04-27 13:14 ` Janosch Frank
2020-04-28 8:50 ` Pierre Morel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1587725152-25569-3-git-send-email-pmorel@linux.ibm.com \
--to=pmorel@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox