From: Matthew Rosato <mjrosato@linux.ibm.com>
To: linux-s390@vger.kernel.org
Cc: alex.williamson@redhat.com, cohuck@redhat.com,
schnelle@linux.ibm.com, farman@linux.ibm.com,
pmorel@linux.ibm.com, borntraeger@linux.ibm.com,
hca@linux.ibm.com, gor@linux.ibm.com,
gerald.schaefer@linux.ibm.com, agordeev@linux.ibm.com,
frankja@linux.ibm.com, david@redhat.com, imbrenda@linux.ibm.com,
vneethv@linux.ibm.com, oberpar@linux.ibm.com,
freude@linux.ibm.com, thuth@redhat.com, pasic@linux.ibm.com,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 26/30] vfio-pci/zdev: wire up zPCI adapter interrupt forwarding support
Date: Fri, 14 Jan 2022 15:31:41 -0500 [thread overview]
Message-ID: <20220114203145.242984-27-mjrosato@linux.ibm.com> (raw)
In-Reply-To: <20220114203145.242984-1-mjrosato@linux.ibm.com>
Introduce support for VFIO_DEVICE_FEATURE_ZPCI_AIF, which is a new
VFIO_DEVICE_FEATURE ioctl. This interface is used to indicate that an
s390x vfio-pci device wishes to enable/disable zPCI adapter interrupt
forwarding, which allows underlying firmware to deliver interrupts
directly to the associated kvm guest.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
---
arch/s390/include/asm/kvm_pci.h | 2 +
drivers/vfio/pci/vfio_pci_core.c | 2 +
drivers/vfio/pci/vfio_pci_zdev.c | 98 +++++++++++++++++++++++++++++++-
include/linux/vfio_pci_core.h | 10 ++++
include/uapi/linux/vfio.h | 7 +++
include/uapi/linux/vfio_zdev.h | 20 +++++++
6 files changed, 138 insertions(+), 1 deletion(-)
diff --git a/arch/s390/include/asm/kvm_pci.h b/arch/s390/include/asm/kvm_pci.h
index dc00c3f27a00..dbab349a4a75 100644
--- a/arch/s390/include/asm/kvm_pci.h
+++ b/arch/s390/include/asm/kvm_pci.h
@@ -36,6 +36,8 @@ struct kvm_zdev {
struct zpci_fib fib;
struct notifier_block nb;
bool interp;
+ bool aif;
+ bool fhost;
};
int kvm_s390_pci_dev_open(struct zpci_dev *zdev);
diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index 2b2d64a2190c..01658de660bd 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -1174,6 +1174,8 @@ long vfio_pci_core_ioctl(struct vfio_device *core_vdev, unsigned int cmd,
return 0;
case VFIO_DEVICE_FEATURE_ZPCI_INTERP:
return vfio_pci_zdev_feat_interp(vdev, feature, arg);
+ case VFIO_DEVICE_FEATURE_ZPCI_AIF:
+ return vfio_pci_zdev_feat_aif(vdev, feature, arg);
default:
return -ENOTTY;
}
diff --git a/drivers/vfio/pci/vfio_pci_zdev.c b/drivers/vfio/pci/vfio_pci_zdev.c
index 4339f48b98bc..891cfa016d63 100644
--- a/drivers/vfio/pci/vfio_pci_zdev.c
+++ b/drivers/vfio/pci/vfio_pci_zdev.c
@@ -13,6 +13,7 @@
#include <linux/vfio_zdev.h>
#include <asm/pci_clp.h>
#include <asm/pci_io.h>
+#include <asm/pci_insn.h>
#include <asm/kvm_pci.h>
#include <linux/vfio_pci_core.h>
@@ -208,6 +209,99 @@ int vfio_pci_zdev_feat_interp(struct vfio_pci_core_device *vdev,
return rc;
}
+int vfio_pci_zdev_feat_aif(struct vfio_pci_core_device *vdev,
+ struct vfio_device_feature feature,
+ unsigned long arg)
+{
+ struct zpci_dev *zdev = to_zpci(vdev->pdev);
+ struct vfio_device_zpci_aif *data;
+ struct vfio_device_feature *feat;
+ unsigned long minsz;
+ int size, rc = 0;
+
+ if (!zdev || !zdev->kzdev)
+ return -EINVAL;
+
+ /* If PROBE specified, return probe results immediately */
+ if (feature.flags & VFIO_DEVICE_FEATURE_PROBE)
+ return kvm_s390_pci_aif_probe(zdev);
+
+ /* GET and SET are mutually exclusive */
+ if ((feature.flags & VFIO_DEVICE_FEATURE_GET) &&
+ (feature.flags & VFIO_DEVICE_FEATURE_SET))
+ return -EINVAL;
+
+ size = sizeof(*feat) + sizeof(*data);
+ feat = kzalloc(size, GFP_KERNEL);
+ if (!feat)
+ return -ENOMEM;
+
+ data = (struct vfio_device_zpci_aif *)&feat->data;
+ minsz = offsetofend(struct vfio_device_feature, flags);
+
+ if (feature.argsz < minsz + sizeof(*data))
+ return -EINVAL;
+
+ /* Get the rest of the payload for GET/SET */
+ rc = copy_from_user(data, (void __user *)(arg + minsz),
+ sizeof(*data));
+ if (rc)
+ rc = -EINVAL;
+
+ if (feature.flags & VFIO_DEVICE_FEATURE_GET) {
+ if (zdev->kzdev->aif)
+ data->flags = VFIO_DEVICE_ZPCI_FLAG_AIF_FLOAT;
+ if (zdev->kzdev->fhost)
+ data->flags |= VFIO_DEVICE_ZPCI_FLAG_AIF_HOST;
+
+ if (copy_to_user((void __user *)arg, feat, size))
+ rc = -EFAULT;
+ } else if (feature.flags & VFIO_DEVICE_FEATURE_SET) {
+ if (data->flags & VFIO_DEVICE_ZPCI_FLAG_AIF_FLOAT) {
+ /* create a guest fib */
+ struct zpci_fib fib;
+
+ fib.fmt0.aibv = data->ibv;
+ fib.fmt0.isc = data->isc;
+ fib.fmt0.noi = data->noi;
+ if (data->sb != 0) {
+ fib.fmt0.aisb = data->sb;
+ fib.fmt0.aisbo = data->sbo;
+ fib.fmt0.sum = 1;
+ } else {
+ fib.fmt0.aisb = 0;
+ fib.fmt0.aisbo = 0;
+ fib.fmt0.sum = 0;
+ }
+ if (data->flags & VFIO_DEVICE_ZPCI_FLAG_AIF_HOST) {
+ rc = kvm_s390_pci_aif_enable(zdev, &fib, false);
+ if (!rc) {
+ zdev->kzdev->aif = true;
+ zdev->kzdev->fhost = true;
+ }
+ } else {
+ rc = kvm_s390_pci_aif_enable(zdev, &fib, true);
+ if (!rc)
+ zdev->kzdev->aif = true;
+ }
+ } else if (data->flags == 0) {
+ rc = kvm_s390_pci_aif_disable(zdev);
+ if (!rc) {
+ zdev->kzdev->aif = false;
+ zdev->kzdev->fhost = false;
+ }
+ } else {
+ rc = -EINVAL;
+ }
+ } else {
+ /* Neither GET nor SET were specified */
+ rc = -EINVAL;
+ }
+
+ kfree(feat);
+ return rc;
+}
+
static int vfio_pci_zdev_group_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -255,8 +349,10 @@ void vfio_pci_zdev_release(struct vfio_pci_core_device *vdev)
* If the device was using interpretation, don't trust that userspace
* did the appropriate cleanup
*/
- if (zdev->gd != 0)
+ if (zdev->gd != 0) {
+ kvm_s390_pci_aif_disable(zdev);
kvm_s390_pci_interp_disable(zdev);
+ }
kvm_s390_pci_dev_release(zdev);
}
diff --git a/include/linux/vfio_pci_core.h b/include/linux/vfio_pci_core.h
index 0db2b1051931..7ec5e82e7933 100644
--- a/include/linux/vfio_pci_core.h
+++ b/include/linux/vfio_pci_core.h
@@ -201,6 +201,9 @@ extern int vfio_pci_info_zdev_add_caps(struct vfio_pci_core_device *vdev,
int vfio_pci_zdev_feat_interp(struct vfio_pci_core_device *vdev,
struct vfio_device_feature feature,
unsigned long arg);
+int vfio_pci_zdev_feat_aif(struct vfio_pci_core_device *vdev,
+ struct vfio_device_feature feature,
+ unsigned long arg);
void vfio_pci_zdev_open(struct vfio_pci_core_device *vdev);
void vfio_pci_zdev_release(struct vfio_pci_core_device *vdev);
#else
@@ -217,6 +220,13 @@ static inline int vfio_pci_zdev_feat_interp(struct vfio_pci_core_device *vdev,
return -ENOTTY;
}
+static inline int vfio_pci_zdev_feat_aif(struct vfio_pci_core_device *vdev,
+ struct vfio_device_feature feature,
+ unsigned long arg)
+{
+ return -ENOTTY;
+}
+
static inline void vfio_pci_zdev_open(struct vfio_pci_core_device *vdev)
{
}
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index b9a75485b8e7..fe3bfd99bf50 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -1009,6 +1009,13 @@ struct vfio_device_feature {
*/
#define VFIO_DEVICE_FEATURE_ZPCI_INTERP (1)
+/*
+ * Provide support for enbaling adapter interruption forwarding for zPCI
+ * devices. This feature is only valid for s390x PCI devices. Data provided
+ * when setting and getting this feature is further described in vfio_zdev.h
+ */
+#define VFIO_DEVICE_FEATURE_ZPCI_AIF (2)
+
/* -------- API for Type1 VFIO IOMMU -------- */
/**
diff --git a/include/uapi/linux/vfio_zdev.h b/include/uapi/linux/vfio_zdev.h
index 575f0410dc66..c574e23f9385 100644
--- a/include/uapi/linux/vfio_zdev.h
+++ b/include/uapi/linux/vfio_zdev.h
@@ -90,4 +90,24 @@ struct vfio_device_zpci_interp {
__u32 fh; /* Host device function handle */
};
+/**
+ * VFIO_DEVICE_FEATURE_ZPCI_AIF
+ *
+ * This feature is used for enabling forwarding of adapter interrupts directly
+ * from firmware to the guest. When setting this feature, the flags indicate
+ * whether to enable/disable the feature and the structure defined below is
+ * used to setup the forwarding structures. When getting this feature, only
+ * the flags are used to indicate the current state.
+ */
+struct vfio_device_zpci_aif {
+ __u64 flags;
+#define VFIO_DEVICE_ZPCI_FLAG_AIF_FLOAT 1
+#define VFIO_DEVICE_ZPCI_FLAG_AIF_HOST 2
+ __u64 ibv; /* Address of guest interrupt bit vector */
+ __u64 sb; /* Address of guest summary bit */
+ __u32 noi; /* Number of interrupts */
+ __u8 isc; /* Guest interrupt subclass */
+ __u8 sbo; /* Offset of guest summary bit vector */
+};
+
#endif
--
2.27.0
next prev parent reply other threads:[~2022-01-14 20:33 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-14 20:31 [PATCH v2 00/30] KVM: s390: enable zPCI for interpretive execution Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 01/30] s390/sclp: detect the zPCI load/store interpretation facility Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 02/30] s390/sclp: detect the AISII facility Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 03/30] s390/sclp: detect the AENI facility Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 04/30] s390/sclp: detect the AISI facility Matthew Rosato
2022-01-17 7:57 ` Thomas Huth
2022-01-14 20:31 ` [PATCH v2 05/30] s390/airq: pass more TPI info to airq handlers Matthew Rosato
2022-01-17 8:27 ` Thomas Huth
2022-01-14 20:31 ` [PATCH v2 06/30] s390/airq: allow for airq structure that uses an input vector Matthew Rosato
2022-01-17 12:29 ` Claudio Imbrenda
2022-01-18 18:52 ` Matthew Rosato
2022-01-18 9:50 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 07/30] s390/pci: externalize the SIC operation controls and routine Matthew Rosato
2022-01-17 16:19 ` Niklas Schnelle
2022-01-26 10:07 ` Claudio Imbrenda
2022-01-27 9:57 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 08/30] s390/pci: stash associated GISA designation Matthew Rosato
2022-01-24 14:08 ` Pierre Morel
2022-01-24 15:12 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 09/30] s390/pci: export some routines related to RPCIT processing Matthew Rosato
2022-01-18 9:51 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 10/30] s390/pci: stash dtsm and maxstbl Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 11/30] s390/pci: add helper function to find device by handle Matthew Rosato
2022-01-18 9:53 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 12/30] s390/pci: get SHM information from list pci Matthew Rosato
2022-01-18 10:36 ` Pierre Morel
2022-01-26 10:13 ` Claudio Imbrenda
2022-01-27 13:41 ` Pierre Morel
2022-01-27 15:14 ` Matthew Rosato
2022-01-27 10:29 ` Niklas Schnelle
2022-01-14 20:31 ` [PATCH v2 13/30] s390/pci: return status from zpci_refresh_trans Matthew Rosato
2022-01-19 18:13 ` Pierre Morel
2022-01-26 10:45 ` Claudio Imbrenda
2022-01-27 10:30 ` Niklas Schnelle
2022-01-14 20:31 ` [PATCH v2 14/30] KVM: s390: pci: add basic kvm_zdev structure Matthew Rosato
2022-01-17 16:25 ` Pierre Morel
2022-01-18 17:32 ` Pierre Morel
2022-01-18 18:39 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 15/30] KVM: s390: pci: do initial setup for AEN interpretation Matthew Rosato
2022-01-19 18:06 ` Pierre Morel
2022-01-19 20:19 ` Matthew Rosato
2022-01-25 12:23 ` Pierre Morel
2022-01-25 14:57 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 16/30] KVM: s390: pci: enable host forwarding of Adapter Event Notifications Matthew Rosato
2022-01-17 17:38 ` Pierre Morel
2022-01-18 17:25 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 17/30] KVM: s390: mechanism to enable guest zPCI Interpretation Matthew Rosato
2022-01-24 14:24 ` Pierre Morel
2022-01-24 15:28 ` Matthew Rosato
2022-01-24 17:15 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 18/30] KVM: s390: pci: provide routines for enabling/disabling interpretation Matthew Rosato
2022-01-24 14:36 ` Pierre Morel
2022-01-24 15:14 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 19/30] KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding Matthew Rosato
2022-01-25 12:41 ` Pierre Morel
2022-01-25 15:44 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 20/30] KVM: s390: pci: provide routines for enabling/disabling IOAT assist Matthew Rosato
2022-01-25 13:29 ` Pierre Morel
2022-01-25 14:47 ` Matthew Rosato
2022-01-26 8:30 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 21/30] KVM: s390: pci: handle refresh of PCI translations Matthew Rosato
2022-01-19 9:29 ` Pierre Morel
2022-01-19 16:39 ` Matthew Rosato
2022-01-19 18:25 ` Pierre Morel
2022-01-19 20:02 ` Matthew Rosato
2022-01-20 9:47 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 22/30] KVM: s390: intercept the rpcit instruction Matthew Rosato
2022-01-18 11:05 ` Pierre Morel
2022-01-18 17:27 ` Matthew Rosato
2022-01-18 17:54 ` Pierre Morel
2022-01-19 14:06 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 23/30] vfio/pci: re-introduce CONFIG_VFIO_PCI_ZDEV Matthew Rosato
2022-01-18 17:20 ` Pierre Morel
2022-01-18 17:32 ` Matthew Rosato
2022-01-18 17:45 ` Pierre Morel
2022-01-18 18:05 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 24/30] vfio-pci/zdev: wire up group notifier Matthew Rosato
2022-01-18 17:34 ` Pierre Morel
2022-01-18 18:37 ` Matthew Rosato
2022-01-14 20:31 ` [PATCH v2 25/30] vfio-pci/zdev: wire up zPCI interpretive execution support Matthew Rosato
2022-01-25 13:01 ` Pierre Morel
2022-01-25 14:21 ` Matthew Rosato
2022-01-14 20:31 ` Matthew Rosato [this message]
2022-01-19 17:10 ` [PATCH v2 26/30] vfio-pci/zdev: wire up zPCI adapter interrupt forwarding support Pierre Morel
2022-01-19 17:20 ` Matthew Rosato
2022-01-25 12:36 ` Pierre Morel
2022-01-25 14:16 ` Matthew Rosato
2022-01-26 8:24 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 27/30] vfio-pci/zdev: wire up zPCI IOAT assist support Matthew Rosato
2022-01-19 14:03 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 28/30] vfio-pci/zdev: add DTSM to clp group capability Matthew Rosato
2022-01-19 13:48 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 29/30] KVM: s390: introduce CPU feature for zPCI Interpretation Matthew Rosato
2022-01-19 13:39 ` Pierre Morel
2022-01-14 20:31 ` [PATCH v2 30/30] MAINTAINERS: additional files related kvm s390 pci passthrough Matthew Rosato
2022-01-14 20:49 ` [PATCH v2 00/30] KVM: s390: enable zPCI for interpretive execution Matthew Rosato
2022-01-19 18:10 ` Pierre Morel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220114203145.242984-27-mjrosato@linux.ibm.com \
--to=mjrosato@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=alex.williamson@redhat.com \
--cc=borntraeger@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=farman@linux.ibm.com \
--cc=frankja@linux.ibm.com \
--cc=freude@linux.ibm.com \
--cc=gerald.schaefer@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=oberpar@linux.ibm.com \
--cc=pasic@linux.ibm.com \
--cc=pmorel@linux.ibm.com \
--cc=schnelle@linux.ibm.com \
--cc=thuth@redhat.com \
--cc=vneethv@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox