[PATCH V5 1/9] virtio: use virtio_device_ready() in virtio_device_restore()

[PATCH V5 1/9] virtio: use virtio_device_ready() in virtio_device_restore()

[Jason Wang]

From: Stefano Garzarella <sgarzare@redhat.com>

It will allow us to do extension on virtio_device_ready() without
duplicating code.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/virtio/virtio.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 22f15f444f75..75c8d560bbd3 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -526,8 +526,9 @@ int virtio_device_restore(struct virtio_device *dev)
 			goto err;
 	}
 
-	/* Finally, tell the device we're all set */
-	virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
+	/* If restore didn't do it, mark device DRIVER_OK ourselves. */
+	if (!(dev->config->get_status(dev) & VIRTIO_CONFIG_S_DRIVER_OK))
+		virtio_device_ready(dev);
 
 	virtio_config_enable(dev);
 
-- 
2.25.1

[PATCH V5 2/9] virtio: use virtio_reset_device() when possible

[Jason Wang]

This allows us to do common extension without duplicating code.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/virtio/virtio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 75c8d560bbd3..8dde44ea044a 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -430,7 +430,7 @@ int register_virtio_device(struct virtio_device *dev)
 
 	/* We always start by resetting the device, in case a previous
 	 * driver messed it up.  This also tests that code path a little. */
-	dev->config->reset(dev);
+	virtio_reset_device(dev);
 
 	/* Acknowledge that we've seen the device. */
 	virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
@@ -496,7 +496,7 @@ int virtio_device_restore(struct virtio_device *dev)
 
 	/* We always start by resetting the device, in case a previous
 	 * driver messed it up. */
-	dev->config->reset(dev);
+	virtio_reset_device(dev);
 
 	/* Acknowledge that we've seen the device. */
 	virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
-- 
2.25.1

Re: [PATCH V5 2/9] virtio: use virtio_reset_device() when possible

[Stefano Garzarella]

On Wed, May 18, 2022 at 11:59:44AM +0800, Jason Wang wrote:
>This allows us to do common extension without duplicating code.
>
>Cc: Thomas Gleixner <tglx@linutronix.de>
>Cc: Peter Zijlstra <peterz@infradead.org>
>Cc: "Paul E. McKenney" <paulmck@kernel.org>
>Cc: Marc Zyngier <maz@kernel.org>
>Cc: Halil Pasic <pasic@linux.ibm.com>
>Cc: Cornelia Huck <cohuck@redhat.com>
>Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
>Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
>Cc: linux-s390@vger.kernel.org
>Reviewed-by: Cornelia Huck <cohuck@redhat.com>
>Signed-off-by: Jason Wang <jasowang@redhat.com>
>---
> drivers/virtio/virtio.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

[PATCH V5 3/9] virtio: introduce config op to synchronize vring callbacks

[Jason Wang]

This patch introduces new virtio config op to vring
callbacks. Transport specific method is required to make sure the
write before this function is visible to the vring_interrupt() that is
called after the return of this function. For the transport that
doesn't provide synchronize_vqs(), use synchornize_rcu() which
synchronize with IRQ implicitly as a fallback.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 include/linux/virtio_config.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index b341dd62aa4d..25be018810a7 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -57,6 +57,11 @@ struct virtio_shm_region {
  *		include a NULL entry for vqs unused by driver
  *	Returns 0 on success or error status
  * @del_vqs: free virtqueues found by find_vqs().
+ * @synchronize_cbs: synchronize with the virtqueue callbacks (optional)
+ *      The function guarantees that all memory operations on the
+ *      queue before it are visible to the vring_interrupt() that is
+ *      called after it.
+ *      vdev: the virtio_device
  * @get_features: get the array of feature bits for this device.
  *	vdev: the virtio_device
  *	Returns the first 64 feature bits (all we currently need).
@@ -89,6 +94,7 @@ struct virtio_config_ops {
 			const char * const names[], const bool *ctx,
 			struct irq_affinity *desc);
 	void (*del_vqs)(struct virtio_device *);
+	void (*synchronize_cbs)(struct virtio_device *);
 	u64 (*get_features)(struct virtio_device *vdev);
 	int (*finalize_features)(struct virtio_device *vdev);
 	const char *(*bus_name)(struct virtio_device *vdev);
@@ -217,6 +223,25 @@ int virtio_find_vqs_ctx(struct virtio_device *vdev, unsigned nvqs,
 				      desc);
 }
 
+/**
+ * virtio_synchronize_cbs - synchronize with virtqueue callbacks
+ * @vdev: the device
+ */
+static inline
+void virtio_synchronize_cbs(struct virtio_device *dev)
+{
+	if (dev->config->synchronize_cbs) {
+		dev->config->synchronize_cbs(dev);
+	} else {
+		/*
+		 * A best effort fallback to synchronize with
+		 * interrupts, preemption and softirq disabled
+		 * regions. See comment above synchronize_rcu().
+		 */
+		synchronize_rcu();
+	}
+}
+
 /**
  * virtio_device_ready - enable vq use in probe function
  * @vdev: the device
-- 
2.25.1

Re: [PATCH V5 3/9] virtio: introduce config op to synchronize vring callbacks

[Stefano Garzarella]

On Wed, May 18, 2022 at 11:59:45AM +0800, Jason Wang wrote:
>This patch introduces new virtio config op to vring
>callbacks. Transport specific method is required to make sure the
>write before this function is visible to the vring_interrupt() that is
>called after the return of this function. For the transport that
>doesn't provide synchronize_vqs(), use synchornize_rcu() which
>synchronize with IRQ implicitly as a fallback.
>
>Cc: Thomas Gleixner <tglx@linutronix.de>
>Cc: Peter Zijlstra <peterz@infradead.org>
>Cc: "Paul E. McKenney" <paulmck@kernel.org>
>Cc: Marc Zyngier <maz@kernel.org>
>Cc: Halil Pasic <pasic@linux.ibm.com>
>Cc: Cornelia Huck <cohuck@redhat.com>
>Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
>Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
>Cc: linux-s390@vger.kernel.org
>Reviewed-by: Cornelia Huck <cohuck@redhat.com>
>Signed-off-by: Jason Wang <jasowang@redhat.com>
>---
> include/linux/virtio_config.h | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

[PATCH V5 4/9] virtio-pci: implement synchronize_cbs()

[Jason Wang]

We can simply reuse vp_synchronize_vectors() for .synchronize_cbs().

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/virtio/virtio_pci_legacy.c | 1 +
 drivers/virtio/virtio_pci_modern.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c
index 6f4e34ce96b8..207985107150 100644
--- a/drivers/virtio/virtio_pci_legacy.c
+++ b/drivers/virtio/virtio_pci_legacy.c
@@ -192,6 +192,7 @@ static const struct virtio_config_ops virtio_pci_config_ops = {
 	.reset		= vp_reset,
 	.find_vqs	= vp_find_vqs,
 	.del_vqs	= vp_del_vqs,
+	.synchronize_cbs = vp_synchronize_vectors,
 	.get_features	= vp_get_features,
 	.finalize_features = vp_finalize_features,
 	.bus_name	= vp_bus_name,
diff --git a/drivers/virtio/virtio_pci_modern.c b/drivers/virtio/virtio_pci_modern.c
index a2671a20ef77..18c2190e3059 100644
--- a/drivers/virtio/virtio_pci_modern.c
+++ b/drivers/virtio/virtio_pci_modern.c
@@ -394,6 +394,7 @@ static const struct virtio_config_ops virtio_pci_config_nodev_ops = {
 	.reset		= vp_reset,
 	.find_vqs	= vp_modern_find_vqs,
 	.del_vqs	= vp_del_vqs,
+	.synchronize_cbs = vp_synchronize_vectors,
 	.get_features	= vp_get_features,
 	.finalize_features = vp_finalize_features,
 	.bus_name	= vp_bus_name,
@@ -411,6 +412,7 @@ static const struct virtio_config_ops virtio_pci_config_ops = {
 	.reset		= vp_reset,
 	.find_vqs	= vp_modern_find_vqs,
 	.del_vqs	= vp_del_vqs,
+	.synchronize_cbs = vp_synchronize_vectors,
 	.get_features	= vp_get_features,
 	.finalize_features = vp_finalize_features,
 	.bus_name	= vp_bus_name,
-- 
2.25.1

[PATCH V5 5/9] virtio-mmio: implement synchronize_cbs()

[Jason Wang]

Simply synchronize the platform irq that is used by us.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/virtio/virtio_mmio.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 56128b9c46eb..4a3b66e4e198 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -345,6 +345,14 @@ static void vm_del_vqs(struct virtio_device *vdev)
 	free_irq(platform_get_irq(vm_dev->pdev, 0), vm_dev);
 }
 
+
+static void vm_synchronize_cbs(struct virtio_device *vdev)
+{
+	struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+	synchronize_irq(platform_get_irq(vm_dev->pdev, 0));
+}
+
 static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index,
 				  void (*callback)(struct virtqueue *vq),
 				  const char *name, bool ctx)
@@ -541,6 +549,7 @@ static const struct virtio_config_ops virtio_mmio_config_ops = {
 	.finalize_features = vm_finalize_features,
 	.bus_name	= vm_bus_name,
 	.get_shm_region = vm_get_shm_region,
+	.synchronize_cbs = vm_synchronize_cbs,
 };
 
 
-- 
2.25.1

[PATCH V5 6/9] virtio-ccw: implement synchronize_cbs()

[Jason Wang]

This patch tries to implement the synchronize_cbs() for ccw. For the
vring_interrupt() that is called via virtio_airq_handler(), the
synchronization is simply done via the airq_info's lock. For the
vring_interrupt() that is called via virtio_ccw_int_handler(), a per
device rwlock is introduced ans used in the synchronization method.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/s390/virtio/virtio_ccw.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c
index d35e7a3f7067..22d36594bcdd 100644
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -62,6 +62,7 @@ struct virtio_ccw_device {
 	unsigned int revision; /* Transport revision */
 	wait_queue_head_t wait_q;
 	spinlock_t lock;
+	rwlock_t irq_lock;
 	struct mutex io_lock; /* Serializes I/O requests */
 	struct list_head virtqueues;
 	bool is_thinint;
@@ -984,6 +985,27 @@ static const char *virtio_ccw_bus_name(struct virtio_device *vdev)
 	return dev_name(&vcdev->cdev->dev);
 }
 
+static void virtio_ccw_synchronize_cbs(struct virtio_device *vdev)
+{
+	struct virtio_ccw_device *vcdev = to_vc_device(vdev);
+	struct airq_info *info = vcdev->airq_info;
+
+	if (info) {
+		/*
+		 * Synchronize with the vring_interrupt() with airq indicator
+		 */
+		write_lock_irq(&info->lock);
+		write_unlock_irq(&info->lock);
+	} else {
+		/*
+		 * Synchronize with the vring_interrupt() called by
+		 * virtio_ccw_int_handler().
+		 */
+		write_lock_irq(&vcdev->irq_lock);
+		write_unlock_irq(&vcdev->irq_lock);
+	}
+}
+
 static const struct virtio_config_ops virtio_ccw_config_ops = {
 	.get_features = virtio_ccw_get_features,
 	.finalize_features = virtio_ccw_finalize_features,
@@ -995,6 +1017,7 @@ static const struct virtio_config_ops virtio_ccw_config_ops = {
 	.find_vqs = virtio_ccw_find_vqs,
 	.del_vqs = virtio_ccw_del_vqs,
 	.bus_name = virtio_ccw_bus_name,
+	.synchronize_cbs = virtio_ccw_synchronize_cbs,
 };
 
 
@@ -1106,6 +1129,8 @@ static void virtio_ccw_int_handler(struct ccw_device *cdev,
 			vcdev->err = -EIO;
 	}
 	virtio_ccw_check_activity(vcdev, activity);
+	/* Local interrupt should be disabled at this time */
+	read_lock(&vcdev->irq_lock);
 	for_each_set_bit(i, indicators(vcdev),
 			 sizeof(*indicators(vcdev)) * BITS_PER_BYTE) {
 		/* The bit clear must happen before the vring kick. */
@@ -1114,6 +1139,7 @@ static void virtio_ccw_int_handler(struct ccw_device *cdev,
 		vq = virtio_ccw_vq_by_ind(vcdev, i);
 		vring_interrupt(0, vq);
 	}
+	read_unlock(&vcdev->irq_lock);
 	if (test_bit(0, indicators2(vcdev))) {
 		virtio_config_changed(&vcdev->vdev);
 		clear_bit(0, indicators2(vcdev));
@@ -1284,6 +1310,7 @@ static int virtio_ccw_online(struct ccw_device *cdev)
 	init_waitqueue_head(&vcdev->wait_q);
 	INIT_LIST_HEAD(&vcdev->virtqueues);
 	spin_lock_init(&vcdev->lock);
+	rwlock_init(&vcdev->irq_lock);
 	mutex_init(&vcdev->io_lock);
 
 	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
-- 
2.25.1

Re: [PATCH V5 6/9] virtio-ccw: implement synchronize_cbs()

[Cornelia Huck]

On Wed, May 18 2022, Jason Wang <jasowang@redhat.com> wrote:

> This patch tries to implement the synchronize_cbs() for ccw. For the
> vring_interrupt() that is called via virtio_airq_handler(), the
> synchronization is simply done via the airq_info's lock. For the
> vring_interrupt() that is called via virtio_ccw_int_handler(), a per
> device rwlock is introduced ans used in the synchronization method.

s/ans/and/

>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: "Paul E. McKenney" <paulmck@kernel.org>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Halil Pasic <pasic@linux.ibm.com>
> Cc: Cornelia Huck <cohuck@redhat.com>
> Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
> Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
> Cc: linux-s390@vger.kernel.org
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
>  drivers/s390/virtio/virtio_ccw.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c
> index d35e7a3f7067..22d36594bcdd 100644
> --- a/drivers/s390/virtio/virtio_ccw.c
> +++ b/drivers/s390/virtio/virtio_ccw.c
> @@ -62,6 +62,7 @@ struct virtio_ccw_device {
>  	unsigned int revision; /* Transport revision */
>  	wait_queue_head_t wait_q;
>  	spinlock_t lock;
> +	rwlock_t irq_lock;
>  	struct mutex io_lock; /* Serializes I/O requests */
>  	struct list_head virtqueues;
>  	bool is_thinint;
> @@ -984,6 +985,27 @@ static const char *virtio_ccw_bus_name(struct virtio_device *vdev)
>  	return dev_name(&vcdev->cdev->dev);
>  }
>  
> +static void virtio_ccw_synchronize_cbs(struct virtio_device *vdev)
> +{
> +	struct virtio_ccw_device *vcdev = to_vc_device(vdev);
> +	struct airq_info *info = vcdev->airq_info;
> +
> +	if (info) {
> +		/*
> +		 * Synchronize with the vring_interrupt() with airq indicator

Maybe

/*
 * This device uses adapter interrupts: synchronize with
 * vring_interrupt() called by virtio_airq_handler() via the indicator
 * area lock.
 */

> +		 */
> +		write_lock_irq(&info->lock);
> +		write_unlock_irq(&info->lock);
> +	} else {
> +		/*
> +		 * Synchronize with the vring_interrupt() called by
> +		 * virtio_ccw_int_handler().

/*
 * This device uses classic interrupts: synchronize with
 * vring_interrupt() called by virtio_ccw_int_handler() via the
 * per-device irq_lock.
 */

> +		 */
> +		write_lock_irq(&vcdev->irq_lock);
> +		write_unlock_irq(&vcdev->irq_lock);
> +	}
> +}
> +
>  static const struct virtio_config_ops virtio_ccw_config_ops = {
>  	.get_features = virtio_ccw_get_features,
>  	.finalize_features = virtio_ccw_finalize_features,
> @@ -995,6 +1017,7 @@ static const struct virtio_config_ops virtio_ccw_config_ops = {
>  	.find_vqs = virtio_ccw_find_vqs,
>  	.del_vqs = virtio_ccw_del_vqs,
>  	.bus_name = virtio_ccw_bus_name,
> +	.synchronize_cbs = virtio_ccw_synchronize_cbs,
>  };
>  
>  
> @@ -1106,6 +1129,8 @@ static void virtio_ccw_int_handler(struct ccw_device *cdev,
>  			vcdev->err = -EIO;
>  	}
>  	virtio_ccw_check_activity(vcdev, activity);
> +	/* Local interrupt should be disabled at this time */

/* Interrupts are disabled here. */

?

Interrupts enabled here would surely be a bug.

> +	read_lock(&vcdev->irq_lock);
>  	for_each_set_bit(i, indicators(vcdev),
>  			 sizeof(*indicators(vcdev)) * BITS_PER_BYTE) {
>  		/* The bit clear must happen before the vring kick. */

Re: [PATCH V5 6/9] virtio-ccw: implement synchronize_cbs()

[Jason Wang]

On Wed, May 18, 2022 at 5:32 PM Cornelia Huck <cohuck@redhat.com> wrote:
>
> On Wed, May 18 2022, Jason Wang <jasowang@redhat.com> wrote:
>
> > This patch tries to implement the synchronize_cbs() for ccw. For the
> > vring_interrupt() that is called via virtio_airq_handler(), the
> > synchronization is simply done via the airq_info's lock. For the
> > vring_interrupt() that is called via virtio_ccw_int_handler(), a per
> > device rwlock is introduced ans used in the synchronization method.
>
> s/ans/and/
>

Will fix.

> >
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: "Paul E. McKenney" <paulmck@kernel.org>
> > Cc: Marc Zyngier <maz@kernel.org>
> > Cc: Halil Pasic <pasic@linux.ibm.com>
> > Cc: Cornelia Huck <cohuck@redhat.com>
> > Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
> > Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
> > Cc: linux-s390@vger.kernel.org
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> >  drivers/s390/virtio/virtio_ccw.c | 27 +++++++++++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> >
> > diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c
> > index d35e7a3f7067..22d36594bcdd 100644
> > --- a/drivers/s390/virtio/virtio_ccw.c
> > +++ b/drivers/s390/virtio/virtio_ccw.c
> > @@ -62,6 +62,7 @@ struct virtio_ccw_device {
> >       unsigned int revision; /* Transport revision */
> >       wait_queue_head_t wait_q;
> >       spinlock_t lock;
> > +     rwlock_t irq_lock;
> >       struct mutex io_lock; /* Serializes I/O requests */
> >       struct list_head virtqueues;
> >       bool is_thinint;
> > @@ -984,6 +985,27 @@ static const char *virtio_ccw_bus_name(struct virtio_device *vdev)
> >       return dev_name(&vcdev->cdev->dev);
> >  }
> >
> > +static void virtio_ccw_synchronize_cbs(struct virtio_device *vdev)
> > +{
> > +     struct virtio_ccw_device *vcdev = to_vc_device(vdev);
> > +     struct airq_info *info = vcdev->airq_info;
> > +
> > +     if (info) {
> > +             /*
> > +              * Synchronize with the vring_interrupt() with airq indicator
>
> Maybe
>
> /*
>  * This device uses adapter interrupts: synchronize with
>  * vring_interrupt() called by virtio_airq_handler() via the indicator
>  * area lock.
>  */
>

Fine.

> > +              */
> > +             write_lock_irq(&info->lock);
> > +             write_unlock_irq(&info->lock);
> > +     } else {
> > +             /*
> > +              * Synchronize with the vring_interrupt() called by
> > +              * virtio_ccw_int_handler().
>
> /*
>  * This device uses classic interrupts: synchronize with
>  * vring_interrupt() called by virtio_ccw_int_handler() via the
>  * per-device irq_lock.
>  */
>

Looks fine.

> > +              */
> > +             write_lock_irq(&vcdev->irq_lock);
> > +             write_unlock_irq(&vcdev->irq_lock);
> > +     }
> > +}
> > +
> >  static const struct virtio_config_ops virtio_ccw_config_ops = {
> >       .get_features = virtio_ccw_get_features,
> >       .finalize_features = virtio_ccw_finalize_features,
> > @@ -995,6 +1017,7 @@ static const struct virtio_config_ops virtio_ccw_config_ops = {
> >       .find_vqs = virtio_ccw_find_vqs,
> >       .del_vqs = virtio_ccw_del_vqs,
> >       .bus_name = virtio_ccw_bus_name,
> > +     .synchronize_cbs = virtio_ccw_synchronize_cbs,
> >  };
> >
> >
> > @@ -1106,6 +1129,8 @@ static void virtio_ccw_int_handler(struct ccw_device *cdev,
> >                       vcdev->err = -EIO;
> >       }
> >       virtio_ccw_check_activity(vcdev, activity);
> > +     /* Local interrupt should be disabled at this time */
>
> /* Interrupts are disabled here. */
>
> ?
>
> Interrupts enabled here would surely be a bug.

Right.

Thanks

>
> > +     read_lock(&vcdev->irq_lock);
> >       for_each_set_bit(i, indicators(vcdev),
> >                        sizeof(*indicators(vcdev)) * BITS_PER_BYTE) {
> >               /* The bit clear must happen before the vring kick. */
>

Re: [PATCH V5 6/9] virtio-ccw: implement synchronize_cbs()

[Halil Pasic]

On Wed, 18 May 2022 11:59:48 +0800
Jason Wang <jasowang@redhat.com> wrote:

> This patch tries to implement the synchronize_cbs() for ccw. For the
> vring_interrupt() that is called via virtio_airq_handler(), the
> synchronization is simply done via the airq_info's lock. For the
> vring_interrupt() that is called via virtio_ccw_int_handler(), a per
> device rwlock is introduced ans used in the synchronization method.
> 
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: "Paul E. McKenney" <paulmck@kernel.org>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Halil Pasic <pasic@linux.ibm.com>
> Cc: Cornelia Huck <cohuck@redhat.com>
> Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
> Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
> Cc: linux-s390@vger.kernel.org
> Signed-off-by: Jason Wang <jasowang@redhat.com>

Reviewed-by: Halil Pasic <pasic@linux.ibm.com>

[PATCH V5 7/9] virtio: allow to unbreak virtqueue

[Jason Wang]

This patch allows the new introduced __virtio_break_device() to
unbreak the virtqueue.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/virtio/virtio_ring.c | 21 +++++++++++++++++++++
 include/linux/virtio.h       |  1 +
 2 files changed, 22 insertions(+)

diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index cfb028ca238e..5b7df7c455f0 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -2397,6 +2397,27 @@ void virtio_break_device(struct virtio_device *dev)
 }
 EXPORT_SYMBOL_GPL(virtio_break_device);
 
+/*
+ * This should allow the device to be used by the driver. You may
+ * need to grab appropriate locks to flush. This should only be used
+ * in some specific case e.g (probing and restoring). Driver should
+ * not call this directly.
+ */
+void __virtio_unbreak_device(struct virtio_device *dev)
+{
+	struct virtqueue *_vq;
+
+	spin_lock(&dev->vqs_list_lock);
+	list_for_each_entry(_vq, &dev->vqs, list) {
+		struct vring_virtqueue *vq = to_vvq(_vq);
+
+		/* Pairs with READ_ONCE() in virtqueue_is_broken(). */
+		WRITE_ONCE(vq->broken, false);
+	}
+	spin_unlock(&dev->vqs_list_lock);
+}
+EXPORT_SYMBOL_GPL(__virtio_unbreak_device);
+
 dma_addr_t virtqueue_get_desc_addr(struct virtqueue *_vq)
 {
 	struct vring_virtqueue *vq = to_vvq(_vq);
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 5464f398912a..d8fdf170637c 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -131,6 +131,7 @@ void unregister_virtio_device(struct virtio_device *dev);
 bool is_virtio_device(struct device *dev);
 
 void virtio_break_device(struct virtio_device *dev);
+void __virtio_unbreak_device(struct virtio_device *dev);
 
 void virtio_config_changed(struct virtio_device *dev);
 #ifdef CONFIG_PM_SLEEP
-- 
2.25.1

Re: [PATCH V5 7/9] virtio: allow to unbreak virtqueue

[Cornelia Huck]

On Wed, May 18 2022, Jason Wang <jasowang@redhat.com> wrote:

> This patch allows the new introduced __virtio_break_device() to
> unbreak the virtqueue.
>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Cc: "Paul E. McKenney" <paulmck@kernel.org>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Halil Pasic <pasic@linux.ibm.com>
> Cc: Cornelia Huck <cohuck@redhat.com>
> Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
> Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
> Cc: linux-s390@vger.kernel.org
> Signed-off-by: Jason Wang <jasowang@redhat.com>
> ---
>  drivers/virtio/virtio_ring.c | 21 +++++++++++++++++++++
>  include/linux/virtio.h       |  1 +
>  2 files changed, 22 insertions(+)
>
> diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> index cfb028ca238e..5b7df7c455f0 100644
> --- a/drivers/virtio/virtio_ring.c
> +++ b/drivers/virtio/virtio_ring.c
> @@ -2397,6 +2397,27 @@ void virtio_break_device(struct virtio_device *dev)
>  }
>  EXPORT_SYMBOL_GPL(virtio_break_device);
>  
> +/*
> + * This should allow the device to be used by the driver. You may
> + * need to grab appropriate locks to flush. This should only be used

Hm, to flush what?

> + * in some specific case e.g (probing and restoring). Driver should
> + * not call this directly.

Maybe "This function should only be called by the core, not directly by
the driver."?

> + */
> +void __virtio_unbreak_device(struct virtio_device *dev)
> +{
> +	struct virtqueue *_vq;
> +
> +	spin_lock(&dev->vqs_list_lock);
> +	list_for_each_entry(_vq, &dev->vqs, list) {
> +		struct vring_virtqueue *vq = to_vvq(_vq);
> +
> +		/* Pairs with READ_ONCE() in virtqueue_is_broken(). */
> +		WRITE_ONCE(vq->broken, false);
> +	}
> +	spin_unlock(&dev->vqs_list_lock);
> +}
> +EXPORT_SYMBOL_GPL(__virtio_unbreak_device);
> +
>  dma_addr_t virtqueue_get_desc_addr(struct virtqueue *_vq)
>  {
>  	struct vring_virtqueue *vq = to_vvq(_vq);

Re: [PATCH V5 7/9] virtio: allow to unbreak virtqueue

[Jason Wang]

On Wed, May 18, 2022 at 6:04 PM Cornelia Huck <cohuck@redhat.com> wrote:
>
> On Wed, May 18 2022, Jason Wang <jasowang@redhat.com> wrote:
>
> > This patch allows the new introduced __virtio_break_device() to
> > unbreak the virtqueue.
> >
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Cc: Peter Zijlstra <peterz@infradead.org>
> > Cc: "Paul E. McKenney" <paulmck@kernel.org>
> > Cc: Marc Zyngier <maz@kernel.org>
> > Cc: Halil Pasic <pasic@linux.ibm.com>
> > Cc: Cornelia Huck <cohuck@redhat.com>
> > Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
> > Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
> > Cc: linux-s390@vger.kernel.org
> > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > ---
> >  drivers/virtio/virtio_ring.c | 21 +++++++++++++++++++++
> >  include/linux/virtio.h       |  1 +
> >  2 files changed, 22 insertions(+)
> >
> > diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> > index cfb028ca238e..5b7df7c455f0 100644
> > --- a/drivers/virtio/virtio_ring.c
> > +++ b/drivers/virtio/virtio_ring.c
> > @@ -2397,6 +2397,27 @@ void virtio_break_device(struct virtio_device *dev)
> >  }
> >  EXPORT_SYMBOL_GPL(virtio_break_device);
> >
> > +/*
> > + * This should allow the device to be used by the driver. You may
> > + * need to grab appropriate locks to flush. This should only be used
>
> Hm, to flush what?

How about "to flush the write to vq->broken"?

>
> > + * in some specific case e.g (probing and restoring). Driver should
> > + * not call this directly.
>
> Maybe "This function should only be called by the core, not directly by
> the driver."?

Ok.

Thanks

>
> > + */
> > +void __virtio_unbreak_device(struct virtio_device *dev)
> > +{
> > +     struct virtqueue *_vq;
> > +
> > +     spin_lock(&dev->vqs_list_lock);
> > +     list_for_each_entry(_vq, &dev->vqs, list) {
> > +             struct vring_virtqueue *vq = to_vvq(_vq);
> > +
> > +             /* Pairs with READ_ONCE() in virtqueue_is_broken(). */
> > +             WRITE_ONCE(vq->broken, false);
> > +     }
> > +     spin_unlock(&dev->vqs_list_lock);
> > +}
> > +EXPORT_SYMBOL_GPL(__virtio_unbreak_device);
> > +
> >  dma_addr_t virtqueue_get_desc_addr(struct virtqueue *_vq)
> >  {
> >       struct vring_virtqueue *vq = to_vvq(_vq);
>

[PATCH V5 8/9] virtio: harden vring IRQ

[Jason Wang]

This is a rework on the previous IRQ hardening that is done for
virtio-pci where several drawbacks were found and were reverted:

1) try to use IRQF_NO_AUTOEN which is not friendly to affinity managed IRQ
   that is used by some device such as virtio-blk
2) done only for PCI transport

The vq->broken is re-used in this patch for implementing the IRQ
hardening. The vq->broken is set to true during both initialization
and reset. And the vq->broken is set to false in
virtio_device_ready(). Then vring_interrupt() can check and return
when vq->broken is true. And in this case, switch to return IRQ_NONE
to let the interrupt core aware of such invalid interrupt to prevent
IRQ storm.

The reason of using a per queue variable instead of a per device one
is that we may need it for per queue reset hardening in the future.

Note that the hardening is only done for vring interrupt since the
config interrupt hardening is already done in commit 22b7050a024d7
("virtio: defer config changed notifications"). But the method that is
used by config interrupt can't be reused by the vring interrupt
handler because it uses spinlock to do the synchronization which is
expensive.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 drivers/s390/virtio/virtio_ccw.c       |  4 ++++
 drivers/virtio/virtio.c                | 15 ++++++++++++---
 drivers/virtio/virtio_mmio.c           |  5 +++++
 drivers/virtio/virtio_pci_modern_dev.c |  5 +++++
 drivers/virtio/virtio_ring.c           | 11 +++++++----
 include/linux/virtio_config.h          | 20 ++++++++++++++++++++
 6 files changed, 53 insertions(+), 7 deletions(-)

diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c
index 22d36594bcdd..6f4c83c6c9a7 100644
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -971,6 +971,10 @@ static void virtio_ccw_set_status(struct virtio_device *vdev, u8 status)
 	ccw->flags = 0;
 	ccw->count = sizeof(status);
 	ccw->cda = (__u32)(unsigned long)&vcdev->dma_area->status;
+	/* We use ssch for setting the status which is a serializing
+	 * instruction that guarantees the memory writes have
+	 * completed before ssch.
+	 */
 	ret = ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_WRITE_STATUS);
 	/* Write failed? We assume status is unchanged. */
 	if (ret)
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 8dde44ea044a..1053f59d0a25 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -220,6 +220,15 @@ static int virtio_features_ok(struct virtio_device *dev)
  * */
 void virtio_reset_device(struct virtio_device *dev)
 {
+	/*
+	 * The below virtio_synchronize_cbs() guarantees that any
+	 * interrupt for this line arriving after
+	 * virtio_synchronize_vqs() has completed is guaranteed to see
+	 * vq->broken as true.
+	 */
+	virtio_break_device(dev);
+	virtio_synchronize_cbs(dev);
+
 	dev->config->reset(dev);
 }
 EXPORT_SYMBOL_GPL(virtio_reset_device);
@@ -428,6 +437,9 @@ int register_virtio_device(struct virtio_device *dev)
 	dev->config_enabled = false;
 	dev->config_change_pending = false;
 
+	INIT_LIST_HEAD(&dev->vqs);
+	spin_lock_init(&dev->vqs_list_lock);
+
 	/* We always start by resetting the device, in case a previous
 	 * driver messed it up.  This also tests that code path a little. */
 	virtio_reset_device(dev);
@@ -435,9 +447,6 @@ int register_virtio_device(struct virtio_device *dev)
 	/* Acknowledge that we've seen the device. */
 	virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
 
-	INIT_LIST_HEAD(&dev->vqs);
-	spin_lock_init(&dev->vqs_list_lock);
-
 	/*
 	 * device_add() causes the bus infrastructure to look for a matching
 	 * driver.
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 4a3b66e4e198..11c137526d1d 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -253,6 +253,11 @@ static void vm_set_status(struct virtio_device *vdev, u8 status)
 	/* We should never be setting status to 0. */
 	BUG_ON(status == 0);
 
+	/*
+	 * Per memory-barriers.txt, wmb() is not needed to guarantee
+	 * that the the cache coherent memory writes have completed
+	 * before writing to the MMIO region.
+	 */
 	writel(status, vm_dev->base + VIRTIO_MMIO_STATUS);
 }
 
diff --git a/drivers/virtio/virtio_pci_modern_dev.c b/drivers/virtio/virtio_pci_modern_dev.c
index 591738ad3d56..91c9c0412730 100644
--- a/drivers/virtio/virtio_pci_modern_dev.c
+++ b/drivers/virtio/virtio_pci_modern_dev.c
@@ -466,6 +466,11 @@ void vp_modern_set_status(struct virtio_pci_modern_device *mdev,
 {
 	struct virtio_pci_common_cfg __iomem *cfg = mdev->common;
 
+	/*
+	 * Per memory-barriers.txt, wmb() is not needed to guarantee
+	 * that the the cache coherent memory writes have completed
+	 * before writing to the MMIO region.
+	 */
 	vp_iowrite8(status, &cfg->device_status);
 }
 EXPORT_SYMBOL_GPL(vp_modern_set_status);
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 5b7df7c455f0..9dfad2890d7a 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1690,7 +1690,7 @@ static struct virtqueue *vring_create_virtqueue_packed(
 	vq->we_own_ring = true;
 	vq->notify = notify;
 	vq->weak_barriers = weak_barriers;
-	vq->broken = false;
+	vq->broken = true;
 	vq->last_used_idx = 0;
 	vq->event_triggered = false;
 	vq->num_added = 0;
@@ -2136,8 +2136,11 @@ irqreturn_t vring_interrupt(int irq, void *_vq)
 		return IRQ_NONE;
 	}
 
-	if (unlikely(vq->broken))
-		return IRQ_HANDLED;
+	if (unlikely(vq->broken)) {
+		dev_warn_once(&vq->vq.vdev->dev,
+			      "virtio vring IRQ raised before DRIVER_OK");
+		return IRQ_NONE;
+	}
 
 	/* Just a hint for performance: so it's ok that this can be racy! */
 	if (vq->event)
@@ -2179,7 +2182,7 @@ struct virtqueue *__vring_new_virtqueue(unsigned int index,
 	vq->we_own_ring = false;
 	vq->notify = notify;
 	vq->weak_barriers = weak_barriers;
-	vq->broken = false;
+	vq->broken = true;
 	vq->last_used_idx = 0;
 	vq->event_triggered = false;
 	vq->num_added = 0;
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 25be018810a7..d4edfd7d91bb 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -256,6 +256,26 @@ void virtio_device_ready(struct virtio_device *dev)
 	unsigned status = dev->config->get_status(dev);
 
 	BUG_ON(status & VIRTIO_CONFIG_S_DRIVER_OK);
+
+	/*
+	 * The virtio_synchronize_cbs() makes sure vring_interrupt()
+	 * will see the driver specific setup if it sees vq->broken
+	 * as false (even if the notifications come before DRIVER_OK).
+	 */
+	virtio_synchronize_cbs(dev);
+	__virtio_unbreak_device(dev);
+	/*
+	 * The transport should ensure the visibility of vq->broken
+	 * before setting DRIVER_OK. See the comments for the transport
+	 * specific set_status() method.
+	 *
+	 * A well behaved device will only notify a virtqueue after
+	 * DRIVER_OK, this means the device should "see" the coherenct
+	 * memory write that set vq->broken as false which is done by
+	 * the driver when it sees DRIVER_OK, then the following
+	 * driver's vring_interrupt() will see vq->broken as false so
+	 * we won't lose any notification.
+	 */
 	dev->config->set_status(dev, status | VIRTIO_CONFIG_S_DRIVER_OK);
 }
 
-- 
2.25.1

[PATCH V5 9/9] virtio: use WARN_ON() to warn illegal status value

[Jason Wang]

We used to use BUG_ON() in virtio_device_ready() to detect illegal
status value, this seems sub-optimal since the value is under the
control of the device. Switch to use WARN_ON() instead.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 include/linux/virtio_config.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index d4edfd7d91bb..9a36051ceb76 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -255,7 +255,7 @@ void virtio_device_ready(struct virtio_device *dev)
 {
 	unsigned status = dev->config->get_status(dev);
 
-	BUG_ON(status & VIRTIO_CONFIG_S_DRIVER_OK);
+	WARN_ON(status & VIRTIO_CONFIG_S_DRIVER_OK);
 
 	/*
 	 * The virtio_synchronize_cbs() makes sure vring_interrupt()
-- 
2.25.1

Re: [PATCH V5 9/9] virtio: use WARN_ON() to warn illegal status value

[Stefano Garzarella]

On Wed, May 18, 2022 at 11:59:51AM +0800, Jason Wang wrote:
>We used to use BUG_ON() in virtio_device_ready() to detect illegal
>status value, this seems sub-optimal since the value is under the
>control of the device. Switch to use WARN_ON() instead.
>
>Cc: Thomas Gleixner <tglx@linutronix.de>
>Cc: Peter Zijlstra <peterz@infradead.org>
>Cc: "Paul E. McKenney" <paulmck@kernel.org>
>Cc: Marc Zyngier <maz@kernel.org>
>Cc: Halil Pasic <pasic@linux.ibm.com>
>Cc: Cornelia Huck <cohuck@redhat.com>
>Cc: Vineeth Vijayan <vneethv@linux.ibm.com>
>Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
>Cc: linux-s390@vger.kernel.org
>Signed-off-by: Jason Wang <jasowang@redhat.com>
>---
> include/linux/virtio_config.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>