From: Yi Liu <yi.l.liu@intel.com>
To: alex.williamson@redhat.com, jgg@nvidia.com, kevin.tian@intel.com
Cc: joro@8bytes.org, robin.murphy@arm.com, cohuck@redhat.com,
eric.auger@redhat.com, nicolinc@nvidia.com, kvm@vger.kernel.org,
mjrosato@linux.ibm.com, chao.p.peng@linux.intel.com,
yi.l.liu@intel.com, yi.y.sun@linux.intel.com, peterx@redhat.com,
jasowang@redhat.com, shameerali.kolothum.thodi@huawei.com,
lulu@redhat.com, suravee.suthikulpanit@amd.com,
intel-gvt-dev@lists.freedesktop.org,
intel-gfx@lists.freedesktop.org, linux-s390@vger.kernel.org,
xudong.hao@intel.com, yan.y.zhao@intel.com,
terrence.xu@intel.com, yanting.jiang@intel.com,
zhenzhong.duan@intel.com, clegoate@redhat.com
Subject: [PATCH v6 10/10] vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESET
Date: Mon, 22 May 2023 04:57:51 -0700 [thread overview]
Message-ID: <20230522115751.326947-11-yi.l.liu@intel.com> (raw)
In-Reply-To: <20230522115751.326947-1-yi.l.liu@intel.com>
This is the way user to invoke hot-reset for the devices opened by cdev
interface. User should check the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED
in the output of VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl before doing
hot-reset for cdev devices.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
---
drivers/vfio/pci/vfio_pci_core.c | 56 +++++++++++++++++++++++++-------
include/uapi/linux/vfio.h | 14 ++++++++
2 files changed, 59 insertions(+), 11 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index 890065f846e4..67f1cb426505 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -181,7 +181,8 @@ static void vfio_pci_probe_mmaps(struct vfio_pci_core_device *vdev)
struct vfio_pci_group_info;
static void vfio_pci_dev_set_try_reset(struct vfio_device_set *dev_set);
static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
- struct vfio_pci_group_info *groups);
+ struct vfio_pci_group_info *groups,
+ struct iommufd_ctx *iommufd_ctx);
/*
* INTx masking requires the ability to disable INTx signaling via PCI_COMMAND
@@ -1301,8 +1302,7 @@ vfio_pci_ioctl_pci_hot_reset_groups(struct vfio_pci_core_device *vdev,
if (ret)
return ret;
- /* Somewhere between 1 and count is OK */
- if (!array_count || array_count > count)
+ if (array_count > count || vfio_device_cdev_opened(&vdev->vdev))
return -EINVAL;
group_fds = kcalloc(array_count, sizeof(*group_fds), GFP_KERNEL);
@@ -1351,7 +1351,7 @@ vfio_pci_ioctl_pci_hot_reset_groups(struct vfio_pci_core_device *vdev,
info.count = array_count;
info.files = files;
- ret = vfio_pci_dev_set_hot_reset(vdev->vdev.dev_set, &info);
+ ret = vfio_pci_dev_set_hot_reset(vdev->vdev.dev_set, &info, NULL);
hot_reset_release:
for (file_idx--; file_idx >= 0; file_idx--)
@@ -1380,7 +1380,11 @@ static int vfio_pci_ioctl_pci_hot_reset(struct vfio_pci_core_device *vdev,
else if (pci_probe_reset_bus(vdev->pdev->bus))
return -ENODEV;
- return vfio_pci_ioctl_pci_hot_reset_groups(vdev, hdr.count, slot, arg);
+ if (hdr.count)
+ return vfio_pci_ioctl_pci_hot_reset_groups(vdev, hdr.count, slot, arg);
+
+ return vfio_pci_dev_set_hot_reset(vdev->vdev.dev_set, NULL,
+ vfio_iommufd_device_ictx(&vdev->vdev));
}
static int vfio_pci_ioctl_ioeventfd(struct vfio_pci_core_device *vdev,
@@ -2347,13 +2351,16 @@ const struct pci_error_handlers vfio_pci_core_err_handlers = {
};
EXPORT_SYMBOL_GPL(vfio_pci_core_err_handlers);
-static bool vfio_dev_in_groups(struct vfio_pci_core_device *vdev,
+static bool vfio_dev_in_groups(struct vfio_device *vdev,
struct vfio_pci_group_info *groups)
{
unsigned int i;
+ if (!groups)
+ return false;
+
for (i = 0; i < groups->count; i++)
- if (vfio_file_has_dev(groups->files[i], &vdev->vdev))
+ if (vfio_file_has_dev(groups->files[i], vdev))
return true;
return false;
}
@@ -2429,7 +2436,8 @@ static int vfio_pci_dev_set_pm_runtime_get(struct vfio_device_set *dev_set)
* get each memory_lock.
*/
static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
- struct vfio_pci_group_info *groups)
+ struct vfio_pci_group_info *groups,
+ struct iommufd_ctx *iommufd_ctx)
{
struct vfio_pci_core_device *cur_mem;
struct vfio_pci_core_device *cur_vma;
@@ -2459,11 +2467,37 @@ static int vfio_pci_dev_set_hot_reset(struct vfio_device_set *dev_set,
goto err_unlock;
list_for_each_entry(cur_vma, &dev_set->device_list, vdev.dev_set_list) {
+ bool owned;
+
/*
- * Test whether all the affected devices are contained by the
- * set of groups provided by the user.
+ * Test whether all the affected devices can be reset by the
+ * user.
+ *
+ * If the user provides a set of groups, all the devices
+ * in the dev_set should be contained by the set of groups
+ * provided by the user.
+ *
+ * If the user provides a zero-length group fd array, then
+ * all the devices in the dev_set must be bound to the same
+ * iommufd_ctx as the input iommufd_ctx. If there is any
+ * device that has not been bound to iommufd_ctx yet, check
+ * if its iommu_group has any device bound to the input
+ * iommufd_ctx Such devices can be considered owned by
+ * the input iommufd_ctx as the device cannot be owned
+ * by another iommufd_ctx when its iommu_group is owned.
+ *
+ * Otherwise, reset is not allowed.
*/
- if (!vfio_dev_in_groups(cur_vma, groups)) {
+ if (iommufd_ctx) {
+ int devid = vfio_iommufd_device_hot_reset_devid(&cur_vma->vdev,
+ iommufd_ctx);
+
+ owned = (devid != VFIO_PCI_DEVID_NOT_OWNED);
+ } else {
+ owned = vfio_dev_in_groups(&cur_vma->vdev, groups);
+ }
+
+ if (!owned) {
ret = -EINVAL;
goto err_undo;
}
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 01203215251a..24858b650562 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -686,6 +686,9 @@ enum {
* Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the
* affected devices are owned by the user. This flag is available only
* when VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved.
+ * When set, user could invoke VFIO_DEVICE_PCI_HOT_RESET with a zero
+ * length fd array on the calling device as the ownership is validated
+ * by iommufd_ctx.
*
* Return: 0 on success, -errno on failure:
* -enospc = insufficient buffer, -enodev = unsupported for device.
@@ -717,6 +720,17 @@ struct vfio_pci_hot_reset_info {
* VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13,
* struct vfio_pci_hot_reset)
*
+ * Userspace requests hot reset for the devices it operates. Due to the
+ * underlying topology, multiple devices can be affected in the reset
+ * while some might be opened by another user. To avoid interference
+ * the calling user must ensure all affected devices are owned by itself.
+ *
+ * As the ownership described by VFIO_DEVICE_GET_PCI_HOT_RESET_INFO, the
+ * cdev opened devices must exclusively provide a zero-length fd array and
+ * the group opened devices must exclusively use an array of group fds for
+ * proof of ownership. Mixed access to devices between cdev and legacy
+ * groups are not supported by this interface.
+ *
* Return: 0 on success, -errno on failure.
*/
struct vfio_pci_hot_reset {
--
2.34.1
next prev parent reply other threads:[~2023-05-22 11:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-22 11:57 [PATCH v6 00/10] Enhance vfio PCI hot reset for vfio cdev device Yi Liu
2023-05-22 11:57 ` [PATCH v6 01/10] vfio-iommufd: Create iommufd_access for noiommu devices Yi Liu
2023-05-22 11:57 ` [PATCH v6 02/10] vfio/pci: Update comment around group_fd get in vfio_pci_ioctl_pci_hot_reset() Yi Liu
2023-05-22 11:57 ` [PATCH v6 03/10] vfio/pci: Move the existing hot reset logic to be a helper Yi Liu
2023-05-22 11:57 ` [PATCH v6 04/10] iommufd: Reserve all negative IDs in the iommufd xarray Yi Liu
2023-05-22 11:57 ` [PATCH v6 05/10] iommufd: Add iommufd_ctx_has_group() Yi Liu
2023-05-22 11:57 ` [PATCH v6 06/10] iommufd: Add helper to retrieve iommufd_ctx and devid Yi Liu
2023-05-22 11:57 ` [PATCH v6 07/10] vfio: Mark cdev usage in vfio_device Yi Liu
2023-05-22 11:57 ` [PATCH v6 08/10] vfio: Add helper to search vfio_device in a dev_set Yi Liu
2023-05-22 11:57 ` [PATCH v6 09/10] vfio/pci: Extend VFIO_DEVICE_GET_PCI_HOT_RESET_INFO for vfio device cdev Yi Liu
2023-05-24 19:56 ` Alex Williamson
2023-05-25 13:02 ` Liu, Yi L
2023-05-26 2:04 ` Baolu Lu
[not found] ` <ZHeZPPo/MWXV1L9Q@nvidia.com>
2023-06-01 6:06 ` Liu, Yi L
2023-06-01 14:24 ` Alex Williamson
2023-05-22 11:57 ` Yi Liu [this message]
2023-05-24 20:19 ` [PATCH v6 10/10] vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESET Alex Williamson
2023-05-30 4:23 ` Liu, Yi L
2023-05-31 17:21 ` Alex Williamson
2023-06-01 5:55 ` Liu, Yi L
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230522115751.326947-11-yi.l.liu@intel.com \
--to=yi.l.liu@intel.com \
--cc=alex.williamson@redhat.com \
--cc=chao.p.peng@linux.intel.com \
--cc=clegoate@redhat.com \
--cc=cohuck@redhat.com \
--cc=eric.auger@redhat.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-gvt-dev@lists.freedesktop.org \
--cc=jasowang@redhat.com \
--cc=jgg@nvidia.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=lulu@redhat.com \
--cc=mjrosato@linux.ibm.com \
--cc=nicolinc@nvidia.com \
--cc=peterx@redhat.com \
--cc=robin.murphy@arm.com \
--cc=shameerali.kolothum.thodi@huawei.com \
--cc=suravee.suthikulpanit@amd.com \
--cc=terrence.xu@intel.com \
--cc=xudong.hao@intel.com \
--cc=yan.y.zhao@intel.com \
--cc=yanting.jiang@intel.com \
--cc=yi.y.sun@linux.intel.com \
--cc=zhenzhong.duan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox