[PATCH AUTOSEL 6.7 01/21] s390/boot: always align vmalloc area on segment boundary

[PATCH AUTOSEL 6.7 01/21] s390/boot: always align vmalloc area on segment boundary

[Sasha Levin]

From: Alexander Gordeev <agordeev@linux.ibm.com>

[ Upstream commit 65f8780e2d70257200547b5a7654974aa7c37ce1 ]

The size of vmalloc area depends from various factors
on boot and could be set to:

1. Default size as determined by VMALLOC_DEFAULT_SIZE macro;
2. One half of the virtual address space not occupied by
   modules and fixed mappings;
3. The size provided by user with vmalloc= kernel command
   line parameter;

In cases [1] and [2] the vmalloc area base address is aligned
on Region3 table type boundary, while in case [3] in might get
aligned on page boundary.

Limit the waste of page tables and always align vmalloc area
size and base address on segment boundary.

Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/boot/ipl_parm.c | 2 +-
 arch/s390/boot/startup.c  | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/s390/boot/ipl_parm.c b/arch/s390/boot/ipl_parm.c
index 2ab4872fbee1..b24de9aabf7d 100644
--- a/arch/s390/boot/ipl_parm.c
+++ b/arch/s390/boot/ipl_parm.c
@@ -274,7 +274,7 @@ void parse_boot_command_line(void)
 			memory_limit = round_down(memparse(val, NULL), PAGE_SIZE);
 
 		if (!strcmp(param, "vmalloc") && val) {
-			vmalloc_size = round_up(memparse(val, NULL), PAGE_SIZE);
+			vmalloc_size = round_up(memparse(val, NULL), _SEGMENT_SIZE);
 			vmalloc_size_set = 1;
 		}
 
diff --git a/arch/s390/boot/startup.c b/arch/s390/boot/startup.c
index 8104e0e3d188..9cc76e631759 100644
--- a/arch/s390/boot/startup.c
+++ b/arch/s390/boot/startup.c
@@ -255,7 +255,8 @@ static unsigned long setup_kernel_memory_layout(void)
 	VMALLOC_END = MODULES_VADDR;
 
 	/* allow vmalloc area to occupy up to about 1/2 of the rest virtual space left */
-	vmalloc_size = min(vmalloc_size, round_down(VMALLOC_END / 2, _REGION3_SIZE));
+	vsize = round_down(VMALLOC_END / 2, _SEGMENT_SIZE);
+	vmalloc_size = min(vmalloc_size, vsize);
 	VMALLOC_START = VMALLOC_END - vmalloc_size;
 
 	/* split remaining virtual space between 1:1 mapping & vmemmap array */
-- 
2.43.0

[PATCH AUTOSEL 6.7 02/21] arch: consolidate arch_irq_work_raise prototypes

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 64bac5ea17d527872121adddfee869c7a0618f8f ]

The prototype was hidden in an #ifdef on x86, which causes a warning:

kernel/irq_work.c:72:13: error: no previous prototype for 'arch_irq_work_raise' [-Werror=missing-prototypes]

Some architectures have a working prototype, while others don't.
Fix this by providing it in only one place that is always visible.

Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/irq_work.h     | 2 --
 arch/arm64/include/asm/irq_work.h   | 2 --
 arch/csky/include/asm/irq_work.h    | 2 +-
 arch/powerpc/include/asm/irq_work.h | 1 -
 arch/riscv/include/asm/irq_work.h   | 2 +-
 arch/s390/include/asm/irq_work.h    | 2 --
 arch/x86/include/asm/irq_work.h     | 1 -
 include/linux/irq_work.h            | 3 +++
 8 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/arch/arm/include/asm/irq_work.h b/arch/arm/include/asm/irq_work.h
index 3149e4dc1b54..8895999834cc 100644
--- a/arch/arm/include/asm/irq_work.h
+++ b/arch/arm/include/asm/irq_work.h
@@ -9,6 +9,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
-extern void arch_irq_work_raise(void);
-
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git a/arch/arm64/include/asm/irq_work.h b/arch/arm64/include/asm/irq_work.h
index 81bbfa3a035b..a1020285ea75 100644
--- a/arch/arm64/include/asm/irq_work.h
+++ b/arch/arm64/include/asm/irq_work.h
@@ -2,8 +2,6 @@
 #ifndef __ASM_IRQ_WORK_H
 #define __ASM_IRQ_WORK_H
 
-extern void arch_irq_work_raise(void);
-
 static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
diff --git a/arch/csky/include/asm/irq_work.h b/arch/csky/include/asm/irq_work.h
index 33aaf39d6f94..d39fcc1f5395 100644
--- a/arch/csky/include/asm/irq_work.h
+++ b/arch/csky/include/asm/irq_work.h
@@ -7,5 +7,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
 }
-extern void arch_irq_work_raise(void);
+
 #endif /* __ASM_CSKY_IRQ_WORK_H */
diff --git a/arch/powerpc/include/asm/irq_work.h b/arch/powerpc/include/asm/irq_work.h
index b8b0be8f1a07..c6d3078bd8c3 100644
--- a/arch/powerpc/include/asm/irq_work.h
+++ b/arch/powerpc/include/asm/irq_work.h
@@ -6,6 +6,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return true;
 }
-extern void arch_irq_work_raise(void);
 
 #endif /* _ASM_POWERPC_IRQ_WORK_H */
diff --git a/arch/riscv/include/asm/irq_work.h b/arch/riscv/include/asm/irq_work.h
index b53891964ae0..b27a4d64fc6a 100644
--- a/arch/riscv/include/asm/irq_work.h
+++ b/arch/riscv/include/asm/irq_work.h
@@ -6,5 +6,5 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return IS_ENABLED(CONFIG_SMP);
 }
-extern void arch_irq_work_raise(void);
+
 #endif /* _ASM_RISCV_IRQ_WORK_H */
diff --git a/arch/s390/include/asm/irq_work.h b/arch/s390/include/asm/irq_work.h
index 603783766d0a..f00c9f610d5a 100644
--- a/arch/s390/include/asm/irq_work.h
+++ b/arch/s390/include/asm/irq_work.h
@@ -7,6 +7,4 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return true;
 }
 
-void arch_irq_work_raise(void);
-
 #endif /* _ASM_S390_IRQ_WORK_H */
diff --git a/arch/x86/include/asm/irq_work.h b/arch/x86/include/asm/irq_work.h
index 800ffce0db29..6b4d36c95165 100644
--- a/arch/x86/include/asm/irq_work.h
+++ b/arch/x86/include/asm/irq_work.h
@@ -9,7 +9,6 @@ static inline bool arch_irq_work_has_interrupt(void)
 {
 	return boot_cpu_has(X86_FEATURE_APIC);
 }
-extern void arch_irq_work_raise(void);
 #else
 static inline bool arch_irq_work_has_interrupt(void)
 {
diff --git a/include/linux/irq_work.h b/include/linux/irq_work.h
index 8cd11a223260..136f2980cba3 100644
--- a/include/linux/irq_work.h
+++ b/include/linux/irq_work.h
@@ -66,6 +66,9 @@ void irq_work_sync(struct irq_work *work);
 void irq_work_run(void);
 bool irq_work_needs_cpu(void);
 void irq_work_single(void *arg);
+
+void arch_irq_work_raise(void);
+
 #else
 static inline bool irq_work_needs_cpu(void) { return false; }
 static inline void irq_work_run(void) { }
-- 
2.43.0

[PATCH AUTOSEL 6.7 04/21] s390/vfio-ap: fix sysfs status attribute for AP queue devices

[Sasha Levin]

From: Tony Krowiak <akrowiak@linux.ibm.com>

[ Upstream commit a0d8f4eeb7c4ffaee21702bcc91a09b3988c5b7a ]

The 'status' attribute for AP queue devices bound to the vfio_ap device
driver displays incorrect status when the mediated device is attached to a
guest, but the queue device is not passed through. In the current
implementation, the status displayed is 'in_use' which is not correct; it
should be 'assigned'. This can happen if one of the queue devices
associated with a given adapter is not bound to the vfio_ap device driver.
For example:

Queues listed in /sys/bus/ap/drivers/vfio_ap:
14.0005
14.0006
14.000d
16.0006
16.000d

Queues listed in /sys/devices/vfio_ap/matrix/$UUID/matrix
14.0005
14.0006
14.000d
16.0005
16.0006
16.000d

Queues listed in /sys/devices/vfio_ap/matrix/$UUID/guest_matrix
14.0005
14.0006
14.000d

The reason no queues for adapter 0x16 are listed in the guest_matrix is
because queue 16.0005 is not bound to the vfio_ap device driver, so no
queue associated with the adapter is passed through to the guest;
therefore, each queue device for adapter 0x16 should display 'assigned'
instead of 'in_use', because those queues are not in use by a guest, but
only assigned to the mediated device.

Let's check the AP configuration for the guest to determine whether a
queue device is passed through before displaying a status of 'in_use'.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20231108201135.351419-1-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/crypto/vfio_ap_ops.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 4db538a55192..6e0a79086656 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -1976,6 +1976,7 @@ static ssize_t status_show(struct device *dev,
 {
 	ssize_t nchars = 0;
 	struct vfio_ap_queue *q;
+	unsigned long apid, apqi;
 	struct ap_matrix_mdev *matrix_mdev;
 	struct ap_device *apdev = to_ap_dev(dev);
 
@@ -1983,8 +1984,21 @@ static ssize_t status_show(struct device *dev,
 	q = dev_get_drvdata(&apdev->device);
 	matrix_mdev = vfio_ap_mdev_for_queue(q);
 
+	/* If the queue is assigned to the matrix mediated device, then
+	 * determine whether it is passed through to a guest; otherwise,
+	 * indicate that it is unassigned.
+	 */
 	if (matrix_mdev) {
-		if (matrix_mdev->kvm)
+		apid = AP_QID_CARD(q->apqn);
+		apqi = AP_QID_QUEUE(q->apqn);
+		/*
+		 * If the queue is passed through to the guest, then indicate
+		 * that it is in use; otherwise, indicate that it is
+		 * merely assigned to a matrix mediated device.
+		 */
+		if (matrix_mdev->kvm &&
+		    test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
+		    test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
 			nchars = scnprintf(buf, PAGE_SIZE, "%s\n",
 					   AP_QUEUE_IN_USE);
 		else
-- 
2.43.0

[PATCH AUTOSEL 6.7 06/21] s390/ptrace: handle setting of fpc register correctly

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 8b13601d19c541158a6e18b278c00ba69ae37829 ]

If the content of the floating point control (fpc) register of a traced
process is modified with the ptrace interface the new value is tested for
validity by temporarily loading it into the fpc register.

This may lead to corruption of the fpc register of the tracing process:
if an interrupt happens while the value is temporarily loaded into the
fpc register, and within interrupt context floating point or vector
registers are used, the current fp/vx registers are saved with
save_fpu_regs() assuming they belong to user space and will be loaded into
fp/vx registers when returning to user space.

test_fp_ctl() restores the original user space fpc register value, however
it will be discarded, when returning to user space.

In result the tracer will incorrectly continue to run with the value that
was supposed to be used for the traced process.

Fix this by saving fpu register contents with save_fpu_regs() before using
test_fp_ctl().

Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/ptrace.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 046403471c5d..c7ed302a6b59 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -392,6 +392,7 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		/*
 		 * floating point control reg. is in the thread structure
 		 */
+		save_fpu_regs();
 		if ((unsigned int) data != 0 ||
 		    test_fp_ctl(data >> (BITS_PER_LONG - 32)))
 			return -EINVAL;
@@ -748,6 +749,7 @@ static int __poke_user_compat(struct task_struct *child,
 		/*
 		 * floating point control reg. is in the thread structure
 		 */
+		save_fpu_regs();
 		if (test_fp_ctl(tmp))
 			return -EINVAL;
 		child->thread.fpu.fpc = data;
@@ -911,9 +913,7 @@ static int s390_fpregs_set(struct task_struct *target,
 	int rc = 0;
 	freg_t fprs[__NUM_FPRS];
 
-	if (target == current)
-		save_fpu_regs();
-
+	save_fpu_regs();
 	if (MACHINE_HAS_VX)
 		convert_vx_to_fp(fprs, target->thread.fpu.vxrs);
 	else
-- 
2.43.0

[PATCH AUTOSEL 6.7 07/21] KVM: s390: fix setting of fpc register

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit b988b1bb0053c0dcd26187d29ef07566a565cf55 ]

kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest cpu. The new value is tested for validity by
temporarily loading it into the fpc register.

This may lead to corruption of the fpc register of the host process:
if an interrupt happens while the value is temporarily loaded into the fpc
register, and within interrupt context floating point or vector registers
are used, the current fp/vx registers are saved with save_fpu_regs()
assuming they belong to user space and will be loaded into fp/vx registers
when returning to user space.

test_fp_ctl() restores the original user space / host process fpc register
value, however it will be discarded, when returning to user space.

In result the host process will incorrectly continue to run with the value
that was supposed to be used for a guest cpu.

Fix this by simply removing the test. There is another test right before
the SIE context is entered which will handles invalid values.

This results in a change of behaviour: invalid values will now be accepted
instead of that the ioctl fails with -EINVAL. This seems to be acceptable,
given that this interface is most likely not used anymore, and this is in
addition the same behaviour implemented with the memory mapped interface
(replace invalid values with zero) - see sync_regs() in kvm-s390.c.

Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kvm/kvm-s390.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 7aa0e668488f..16e32174807f 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -4316,10 +4316,6 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 
 	vcpu_load(vcpu);
 
-	if (test_fp_ctl(fpu->fpc)) {
-		ret = -EINVAL;
-		goto out;
-	}
 	vcpu->run->s.regs.fpc = fpu->fpc;
 	if (MACHINE_HAS_VX)
 		convert_fp_to_vx((__vector128 *) vcpu->run->s.regs.vrs,
@@ -4327,7 +4323,6 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 	else
 		memcpy(vcpu->run->s.regs.fprs, &fpu->fprs, sizeof(fpu->fprs));
 
-out:
 	vcpu_put(vcpu);
 	return ret;
 }
-- 
2.43.0