[PATCH 0/3] s390/vfio-ap: queue_configuration sysfs attribute for mdevctl automation

[PATCH 0/3] s390/vfio-ap: queue_configuration sysfs attribute for mdevctl automation

[Jason J. Herne]

Mdevctl requires a way to atomically query and atomically update a vfio-ap
mdev's current state. This patch set creates the queue_configuration sysfs
attribute.  This new attribute allows reading and writing an mdev's entire
state in one go. If a newly written state is invalid for any reason the entire
state is rejected and the target mdev remains unchanged.

Jason J. Herne (3):
  s390/ap: Externalize AP bus specific bitmap reading function
  s390/vfio-ap: Add sysfs attr, queue_configuration, to export mdev
    state
  s390/vfio-ap: Add write support to sysfs attr ap_config

 Documentation/arch/s390/vfio-ap.rst   |  27 ++++
 drivers/s390/crypto/ap_bus.c          |  13 +-
 drivers/s390/crypto/ap_bus.h          |  22 +++
 drivers/s390/crypto/vfio_ap_ops.c     | 213 +++++++++++++++++++++++---
 drivers/s390/crypto/vfio_ap_private.h |   6 +-
 5 files changed, 248 insertions(+), 33 deletions(-)

-- 
2.41.0

[PATCH 1/3] s390/ap: Externalize AP bus specific bitmap reading function

[Jason J. Herne]

Rename hex2bitmap() to ap_hex2bitmap() and export it for external
use. This function will be used by the implementation of the vfio-ap
queue_configuration sysfs attribute.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
---
 drivers/s390/crypto/ap_bus.c | 13 +++----------
 drivers/s390/crypto/ap_bus.h | 22 ++++++++++++++++++++++
 2 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index f46dd6abacd7..5d8e379eff44 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1035,15 +1035,7 @@ void ap_bus_cfg_chg(void)
 	ap_bus_force_rescan();
 }
 
-/*
- * hex2bitmap() - parse hex mask string and set bitmap.
- * Valid strings are "0x012345678" with at least one valid hex number.
- * Rest of the bitmap to the right is padded with 0. No spaces allowed
- * within the string, the leading 0x may be omitted.
- * Returns the bitmask with exactly the bits set as given by the hex
- * string (both in big endian order).
- */
-static int hex2bitmap(const char *str, unsigned long *bitmap, int bits)
+int ap_hex2bitmap(const char *str, unsigned long *bitmap, int bits)
 {
 	int i, n, b;
 
@@ -1070,6 +1062,7 @@ static int hex2bitmap(const char *str, unsigned long *bitmap, int bits)
 		return -EINVAL;
 	return 0;
 }
+EXPORT_SYMBOL(ap_hex2bitmap);
 
 /*
  * modify_bitmap() - parse bitmask argument and modify an existing
@@ -1135,7 +1128,7 @@ static int ap_parse_bitmap_str(const char *str, unsigned long *bitmap, int bits,
 		rc = modify_bitmap(str, newmap, bits);
 	} else {
 		memset(newmap, 0, size);
-		rc = hex2bitmap(str, newmap, bits);
+		rc = ap_hex2bitmap(str, newmap, bits);
 	}
 	return rc;
 }
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 98814839ef30..954f8d36c2d9 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -343,6 +343,28 @@ int ap_parse_mask_str(const char *str,
 		      unsigned long *bitmap, int bits,
 		      struct mutex *lock);
 
+/*
+ * ap_hex2bitmap() - Convert a string containing a hexadecimal number (str)
+ * into a bitmap (bitmap) with bits set that correspond to the bits represented
+ * by the hex string. Input and output data is in big endian order.
+ *
+ * str - Input hex string of format "0x1234abcd". The leading "0x" is optional.
+ * At least one digit is required. Must be large enough to hold the number of
+ * bits represented by the bits parameter.
+ *
+ * bitmap - Pointer to a bitmap. Upon successful completion of this function,
+ * this bitmap will have bits set to match the value of str. If bitmap is longer
+ * than str, then the rightmost bits of bitmap are padded with zeros. Must be
+ * large enough to hold the number of bits represented by the bits parameter.
+ *
+ * bits - Length, in bits, of the bitmap represented by str. Must be a multiple
+ * of 8.
+ *
+ * Returns: 0           on success
+ *          -EINVAL     If str format is invalid or bits is not a multiple of 8.
+ */
+int ap_hex2bitmap(const char *str, unsigned long *bitmap, int bits);
+
 /*
  * Interface to wait for the AP bus to have done one initial ap bus
  * scan and all detected APQNs have been bound to device drivers.
-- 
2.41.0

[PATCH 2/3] s390/vfio-ap: Add sysfs attr, queue_configuration, to export mdev state

[Jason J. Herne]

Add ap_config sysfs attribute. This will provide the means for
setting or displaying the adapters, domains and control domains assigned
to the vfio-ap mediated device in a single operation. This sysfs
attribute is comprised of three masks: One for adapters, one for domains,
and one for control domains.

This attribute is intended to be used by mdevctl to query a vfio-ap
mediated device's state.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
 drivers/s390/crypto/vfio_ap_ops.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 243d252bc631..96293683b939 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -1508,6 +1508,32 @@ static ssize_t guest_matrix_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(guest_matrix);
 
+static ssize_t write_ap_bitmap(unsigned long *bitmap, char *buf, int offset, char sep)
+{
+	return sysfs_emit_at(buf, offset, "0x%016lx%016lx%016lx%016lx%c",
+			 bitmap[0], bitmap[1], bitmap[2], bitmap[3], sep);
+}
+
+static ssize_t ap_config_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
+	int idx = 0;
+
+	idx += write_ap_bitmap(matrix_mdev->matrix.apm, buf, idx, ',');
+	idx += write_ap_bitmap(matrix_mdev->matrix.aqm, buf, idx, ',');
+	idx += write_ap_bitmap(matrix_mdev->matrix.adm, buf, idx, '\n');
+
+	return idx;
+}
+
+static ssize_t ap_config_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	return count;
+}
+static DEVICE_ATTR_RW(ap_config);
+
 static struct attribute *vfio_ap_mdev_attrs[] = {
 	&dev_attr_assign_adapter.attr,
 	&dev_attr_unassign_adapter.attr,
@@ -1515,6 +1541,7 @@ static struct attribute *vfio_ap_mdev_attrs[] = {
 	&dev_attr_unassign_domain.attr,
 	&dev_attr_assign_control_domain.attr,
 	&dev_attr_unassign_control_domain.attr,
+	&dev_attr_ap_config.attr,
 	&dev_attr_control_domains.attr,
 	&dev_attr_matrix.attr,
 	&dev_attr_guest_matrix.attr,
-- 
2.41.0

Re: [PATCH 2/3] s390/vfio-ap: Add sysfs attr, queue_configuration, to export mdev state

[Anthony Krowiak]

Reviewed-by: Anthony Krowiak <akrowiak@linux.ibm.com>

On 1/26/24 9:35 AM, Jason J. Herne wrote:
> Add ap_config sysfs attribute. This will provide the means for
> setting or displaying the adapters, domains and control domains assigned
> to the vfio-ap mediated device in a single operation. This sysfs
> attribute is comprised of three masks: One for adapters, one for domains,
> and one for control domains.
>
> This attribute is intended to be used by mdevctl to query a vfio-ap
> mediated device's state.
>
> Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
> ---
>   drivers/s390/crypto/vfio_ap_ops.c | 27 +++++++++++++++++++++++++++
>   1 file changed, 27 insertions(+)
>
> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
> index 243d252bc631..96293683b939 100644
> --- a/drivers/s390/crypto/vfio_ap_ops.c
> +++ b/drivers/s390/crypto/vfio_ap_ops.c
> @@ -1508,6 +1508,32 @@ static ssize_t guest_matrix_show(struct device *dev,
>   }
>   static DEVICE_ATTR_RO(guest_matrix);
>   
> +static ssize_t write_ap_bitmap(unsigned long *bitmap, char *buf, int offset, char sep)
> +{
> +	return sysfs_emit_at(buf, offset, "0x%016lx%016lx%016lx%016lx%c",
> +			 bitmap[0], bitmap[1], bitmap[2], bitmap[3], sep);
> +}
> +
> +static ssize_t ap_config_show(struct device *dev, struct device_attribute *attr,
> +			      char *buf)
> +{
> +	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
> +	int idx = 0;
> +
> +	idx += write_ap_bitmap(matrix_mdev->matrix.apm, buf, idx, ',');
> +	idx += write_ap_bitmap(matrix_mdev->matrix.aqm, buf, idx, ',');
> +	idx += write_ap_bitmap(matrix_mdev->matrix.adm, buf, idx, '\n');
> +
> +	return idx;
> +}
> +
> +static ssize_t ap_config_store(struct device *dev, struct device_attribute *attr,
> +			       const char *buf, size_t count)
> +{
> +	return count;
> +}
> +static DEVICE_ATTR_RW(ap_config);
> +
>   static struct attribute *vfio_ap_mdev_attrs[] = {
>   	&dev_attr_assign_adapter.attr,
>   	&dev_attr_unassign_adapter.attr,
> @@ -1515,6 +1541,7 @@ static struct attribute *vfio_ap_mdev_attrs[] = {
>   	&dev_attr_unassign_domain.attr,
>   	&dev_attr_assign_control_domain.attr,
>   	&dev_attr_unassign_control_domain.attr,
> +	&dev_attr_ap_config.attr,
>   	&dev_attr_control_domains.attr,
>   	&dev_attr_matrix.attr,
>   	&dev_attr_guest_matrix.attr,

[PATCH 3/3] s390/vfio-ap: Add write support to sysfs attr ap_config

[Jason J. Herne]

Allow writing a complete set of masks to ap_config. Doing so will
cause the vfio-ap driver to replace the vfio-ap mediated device's entire
state with the given set of masks. If the given state cannot be set, then
no changes are made to the vfio-ap mediated device.

The format of the data written to ap_config is as follows:
{amask},{dmask},{cmask}\n

\n is a newline character.

amask, dmask, and cmask are masks identifying which adapters, domains,
and control domains should be assigned to the mediated device.

The format of a mask is	as follows:
0xNN..NN

Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
The leftmost (highest order) bit represents adapter/domain 0.

For an example set of masks that represent your mdev's current
configuration, simply cat ap_config.

This attribute is intended to be used by an mdevctl callout script
supporting the mdev type vfio_ap-passthrough to atomically update a
vfio-ap mediated device's state.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
---
 Documentation/arch/s390/vfio-ap.rst   |  27 ++++
 drivers/s390/crypto/vfio_ap_ops.c     | 188 +++++++++++++++++++++++---
 drivers/s390/crypto/vfio_ap_private.h |   6 +-
 3 files changed, 197 insertions(+), 24 deletions(-)

diff --git a/Documentation/arch/s390/vfio-ap.rst b/Documentation/arch/s390/vfio-ap.rst
index 929ee1c1c940..a94f13916dea 100644
--- a/Documentation/arch/s390/vfio-ap.rst
+++ b/Documentation/arch/s390/vfio-ap.rst
@@ -380,6 +380,33 @@ matrix device.
     control_domains:
       A read-only file for displaying the control domain numbers assigned to the
       vfio_ap mediated device.
+    ap_config:
+      A read/write file that, when written to, allows the entire vfio_ap mediated
+      device's ap configuration to be replaced in one shot. Three masks are given,
+      one for adapters, one for domains, and one for control domains. If the
+      given state cannot be set, then no changes are made to the vfio-ap
+      mediated device.
+
+      The format of the data written to ap_config is as follows:
+      {amask},{dmask},{cmask}\n
+
+      \n is a newline character.
+
+      amask, dmask, and cmask are masks identifying which adapters, domains,
+      and control domains should be assigned to the mediated device.
+
+      The format of a mask is as follows:
+      0xNN..NN
+
+      Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
+      The leftmost (highest order) bit represents adapter/domain 0.
+
+      For an example set of masks that represent your mdev's current
+      configuration, simply cat ap_config.
+
+      This attribute is intended to be used by automation. End users would be
+      better served using the respective assign/unassign attributes for adapters
+      and domains.
 
 * functions:
 
diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 96293683b939..5ad134c1d5e6 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -764,10 +764,11 @@ static int vfio_ap_mdev_probe(struct mdev_device *mdev)
 static void vfio_ap_mdev_link_queue(struct ap_matrix_mdev *matrix_mdev,
 				    struct vfio_ap_queue *q)
 {
-	if (q) {
-		q->matrix_mdev = matrix_mdev;
-		hash_add(matrix_mdev->qtable.queues, &q->mdev_qnode, q->apqn);
-	}
+	if (!q || vfio_ap_mdev_get_queue(matrix_mdev, q->apqn))
+		return;
+
+	q->matrix_mdev = matrix_mdev;
+	hash_add(matrix_mdev->qtable.queues, &q->mdev_qnode, q->apqn);
 }
 
 static void vfio_ap_mdev_link_apqn(struct ap_matrix_mdev *matrix_mdev, int apqn)
@@ -1048,21 +1049,25 @@ static void vfio_ap_mdev_unlink_adapter(struct ap_matrix_mdev *matrix_mdev,
 	}
 }
 
-static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
-					    unsigned long apid)
+static void vfio_ap_mdev_hot_unplug_adapters(struct ap_matrix_mdev *matrix_mdev,
+					    unsigned long *apids)
 {
-	int loop_cursor;
-	struct vfio_ap_queue *q;
 	struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), GFP_KERNEL);
+	struct vfio_ap_queue *q;
+	unsigned long apid;
+	int loop_cursor;
 
 	hash_init(qtable->queues);
-	vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, qtable);
 
-	if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm)) {
-		clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
-		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+	for_each_set_bit_inv(apid, apids, AP_DEVICES) {
+		vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, qtable);
+
+		if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm))
+			clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
 	}
 
+	vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+
 	vfio_ap_mdev_reset_queues(qtable);
 
 	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
@@ -1073,6 +1078,15 @@ static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
 	kfree(qtable);
 }
 
+static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
+					    unsigned long apid)
+{
+	DECLARE_BITMAP(apids, AP_DEVICES);
+
+	set_bit_inv(apid, apids);
+	vfio_ap_mdev_hot_unplug_adapters(matrix_mdev, apids);
+}
+
 /**
  * unassign_adapter_store - parses the APID from @buf and clears the
  * corresponding bit in the mediated matrix device's APM
@@ -1235,21 +1249,24 @@ static void vfio_ap_mdev_unlink_domain(struct ap_matrix_mdev *matrix_mdev,
 	}
 }
 
-static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
-					   unsigned long apqi)
+static void vfio_ap_mdev_hot_unplug_domains(struct ap_matrix_mdev *matrix_mdev,
+					   unsigned long *apqis)
 {
-	int loop_cursor;
-	struct vfio_ap_queue *q;
 	struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), GFP_KERNEL);
+	struct vfio_ap_queue *q;
+	unsigned long apqi;
+	int loop_cursor;
 
 	hash_init(qtable->queues);
-	vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, qtable);
 
-	if (test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm)) {
-		clear_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm);
-		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+	for_each_set_bit_inv(apqi, apqis, AP_DOMAINS) {
+		vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, qtable);
+
+		if (test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
+			clear_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm);
 	}
 
+	vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 	vfio_ap_mdev_reset_queues(qtable);
 
 	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
@@ -1260,6 +1277,15 @@ static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
 	kfree(qtable);
 }
 
+static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
+					   unsigned long apqi)
+{
+	DECLARE_BITMAP(apqis, AP_DOMAINS);
+
+	set_bit_inv(apqi, apqis);
+	vfio_ap_mdev_hot_unplug_domains(matrix_mdev, apqis);
+}
+
 /**
  * unassign_domain_store - parses the APQI from @buf and clears the
  * corresponding bit in the mediated matrix device's AQM
@@ -1527,10 +1553,130 @@ static ssize_t ap_config_show(struct device *dev, struct device_attribute *attr,
 	return idx;
 }
 
+/* Number of characters needed for a complete hex mask representing the bits in ..  */
+#define AP_DEVICES_STRLEN	(AP_DEVICES/4 + 3)
+#define AP_DOMAINS_STRLEN	(AP_DOMAINS/4 + 3)
+#define AP_CONFIG_STRLEN	(AP_DEVICES_STRLEN + 2 * AP_DOMAINS_STRLEN)
+
+static int parse_bitmap(char **strbufptr, unsigned long *bitmap, int nbits)
+{
+	char *curmask;
+
+	curmask = strsep(strbufptr, ",\n");
+	if (!curmask)
+		return -EINVAL;
+
+	bitmap_clear(bitmap, 0, nbits);
+	return ap_hex2bitmap(curmask, bitmap, nbits);
+}
+
+static int ap_matrix_length_check(struct ap_matrix_mdev *matrix_mdev)
+{
+	unsigned long bit;
+
+	for_each_set_bit_inv(bit, matrix_mdev->matrix.apm, AP_DEVICES) {
+		if (bit > matrix_mdev->matrix.apm_max)
+			return -ENODEV;
+	}
+
+	for_each_set_bit_inv(bit, matrix_mdev->matrix.aqm, AP_DOMAINS) {
+		if (bit > matrix_mdev->matrix.aqm_max)
+			return -ENODEV;
+	}
+
+	for_each_set_bit_inv(bit, matrix_mdev->matrix.adm, AP_DOMAINS) {
+		if (bit > matrix_mdev->matrix.adm_max)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void ap_matrix_copy(struct ap_matrix *dst, struct ap_matrix *src)
+{
+	bitmap_copy(dst->apm, src->apm, AP_DEVICES);
+	bitmap_copy(dst->aqm, src->aqm, AP_DOMAINS);
+	bitmap_copy(dst->adm, src->adm, AP_DOMAINS);
+}
+
 static ssize_t ap_config_store(struct device *dev, struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	return count;
+	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
+	struct ap_matrix m_new, m_old, m_added, m_removed;
+	unsigned long newbit;
+	char *newbuf, *rest;
+	int rc = count;
+	bool do_update;
+
+	newbuf = rest = kstrndup(buf, AP_CONFIG_STRLEN, GFP_KERNEL);
+	if (!newbuf)
+		return -ENOMEM;
+
+	mutex_lock(&ap_perms_mutex);
+	get_update_locks_for_mdev(matrix_mdev);
+
+	/* Save old state */
+	ap_matrix_copy(&m_old, &matrix_mdev->matrix);
+
+	if (parse_bitmap(&rest, m_new.apm, AP_DEVICES) ||
+	    parse_bitmap(&rest, m_new.aqm, AP_DOMAINS) ||
+		parse_bitmap(&rest, m_new.adm, AP_DOMAINS)) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	bitmap_andnot(m_removed.apm, m_old.apm, m_new.apm, AP_DEVICES);
+	bitmap_andnot(m_removed.aqm, m_old.aqm, m_new.aqm, AP_DOMAINS);
+	bitmap_andnot(m_added.apm, m_new.apm, m_old.apm, AP_DEVICES);
+	bitmap_andnot(m_added.aqm, m_new.aqm, m_old.aqm, AP_DOMAINS);
+
+	/* Need new bitmaps in matrix_mdev for validation */
+	ap_matrix_copy(&matrix_mdev->matrix, &m_new);
+
+	/* Ensure new state is valid, else undo new state */
+	rc = vfio_ap_mdev_validate_masks(matrix_mdev);
+	if (rc) {
+		ap_matrix_copy(&matrix_mdev->matrix, &m_old);
+		goto out;
+	}
+	rc = ap_matrix_length_check(matrix_mdev);
+	if (rc) {
+		ap_matrix_copy(&matrix_mdev->matrix, &m_old);
+		goto out;
+	}
+	rc = count;
+
+	/* Need old bitmaps in matrix_mdev for unplug/unlink */
+	ap_matrix_copy(&matrix_mdev->matrix, &m_old);
+
+	/* Unlink removed adapters/domains */
+	vfio_ap_mdev_hot_unplug_adapters(matrix_mdev, m_removed.apm);
+	vfio_ap_mdev_hot_unplug_domains(matrix_mdev, m_removed.aqm);
+
+	/* Need new bitmaps in matrix_mdev for linking new adapters/domains */
+	ap_matrix_copy(&matrix_mdev->matrix, &m_new);
+
+	/* Link newly added adapters */
+	for_each_set_bit_inv(newbit, m_added.apm, AP_DEVICES)
+		vfio_ap_mdev_link_adapter(matrix_mdev, newbit);
+
+	for_each_set_bit_inv(newbit, m_added.aqm, AP_DOMAINS)
+		vfio_ap_mdev_link_domain(matrix_mdev, newbit);
+
+	/* filter resources not bound to vfio-ap */
+	do_update = vfio_ap_mdev_filter_matrix(matrix_mdev->matrix.apm,
+				matrix_mdev->matrix.aqm, matrix_mdev);
+	do_update |= vfio_ap_mdev_filter_cdoms(matrix_mdev);
+
+	/* Apply changes to shadow apbc if things changed */
+	if (do_update)
+		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+out:
+	release_update_locks_for_mdev(matrix_mdev);
+	mutex_unlock(&ap_perms_mutex);
+	kfree(newbuf);
+	return rc;
 }
 static DEVICE_ATTR_RW(ap_config);
 
diff --git a/drivers/s390/crypto/vfio_ap_private.h b/drivers/s390/crypto/vfio_ap_private.h
index 88aff8b81f2f..e2cf07c184bf 100644
--- a/drivers/s390/crypto/vfio_ap_private.h
+++ b/drivers/s390/crypto/vfio_ap_private.h
@@ -75,11 +75,11 @@ extern struct ap_matrix_dev *matrix_dev;
  */
 struct ap_matrix {
 	unsigned long apm_max;
-	DECLARE_BITMAP(apm, 256);
+	DECLARE_BITMAP(apm, AP_DEVICES);
 	unsigned long aqm_max;
-	DECLARE_BITMAP(aqm, 256);
+	DECLARE_BITMAP(aqm, AP_DOMAINS);
 	unsigned long adm_max;
-	DECLARE_BITMAP(adm, 256);
+	DECLARE_BITMAP(adm, AP_DOMAINS);
 };
 
 /**
-- 
2.41.0

Re: [PATCH 3/3] s390/vfio-ap: Add write support to sysfs attr ap_config

[kernel test robot]

Hi Jason,

kernel test robot noticed the following build warnings:

[auto build test WARNING on kvms390/next]
[cannot apply to s390/features linus/master v6.8-rc1 next-20240125]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Jason-J-Herne/s390-ap-Externalize-AP-bus-specific-bitmap-reading-function/20240126-223952
base:   https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git next
patch link:    https://lore.kernel.org/r/20240126143533.14043-4-jjherne%40linux.ibm.com
patch subject: [PATCH 3/3] s390/vfio-ap: Add write support to sysfs attr ap_config
config: s390-defconfig (https://download.01.org/0day-ci/archive/20240128/202401282141.A8V47yFI-lkp@intel.com/config)
compiler: s390-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240128/202401282141.A8V47yFI-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401282141.A8V47yFI-lkp@intel.com/

All warnings (new ones prefixed by >>):

   In file included from include/linux/cpumask.h:12,
                    from include/linux/smp.h:13,
                    from include/linux/lockdep.h:14,
                    from include/linux/spinlock.h:63,
                    from include/linux/mmzone.h:8,
                    from include/linux/gfp.h:7,
                    from include/linux/mm.h:7,
                    from include/linux/scatterlist.h:8,
                    from include/linux/iommu.h:10,
                    from include/linux/vfio.h:12,
                    from drivers/s390/crypto/vfio_ap_ops.c:12:
   In function 'bitmap_copy',
       inlined from 'ap_matrix_copy' at drivers/s390/crypto/vfio_ap_ops.c:1593:2,
       inlined from 'ap_config_store' at drivers/s390/crypto/vfio_ap_ops.c:1616:2:
>> include/linux/bitmap.h:245:17: warning: 'memcpy' reading 32 bytes from a region of size 0 [-Wstringop-overread]
     245 |                 memcpy(dst, src, len);
         |                 ^~~~~~~~~~~~~~~~~~~~~
   In function 'ap_config_store':
   cc1: note: source object is likely at address zero
   In function 'bitmap_copy',
       inlined from 'ap_matrix_copy' at drivers/s390/crypto/vfio_ap_ops.c:1594:2,
       inlined from 'ap_config_store' at drivers/s390/crypto/vfio_ap_ops.c:1616:2:
>> include/linux/bitmap.h:245:17: warning: 'memcpy' reading 32 bytes from a region of size 0 [-Wstringop-overread]
     245 |                 memcpy(dst, src, len);
         |                 ^~~~~~~~~~~~~~~~~~~~~
   In function 'ap_config_store':
   cc1: note: source object is likely at address zero
   In function 'bitmap_copy',
       inlined from 'ap_matrix_copy' at drivers/s390/crypto/vfio_ap_ops.c:1595:2,
       inlined from 'ap_config_store' at drivers/s390/crypto/vfio_ap_ops.c:1616:2:
>> include/linux/bitmap.h:245:17: warning: 'memcpy' reading 32 bytes from a region of size 0 [-Wstringop-overread]
     245 |                 memcpy(dst, src, len);
         |                 ^~~~~~~~~~~~~~~~~~~~~
   In function 'ap_config_store':
   cc1: note: source object is likely at address zero


vim +/memcpy +245 include/linux/bitmap.h

^1da177e4c3f41 Linus Torvalds    2005-04-16  236  
^1da177e4c3f41 Linus Torvalds    2005-04-16  237  static inline void bitmap_copy(unsigned long *dst, const unsigned long *src,
8b4daad52fee77 Rasmus Villemoes  2015-02-12  238  			unsigned int nbits)
^1da177e4c3f41 Linus Torvalds    2005-04-16  239  {
8b4daad52fee77 Rasmus Villemoes  2015-02-12  240  	unsigned int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long);
3e7e5baaaba780 Alexander Lobakin 2022-06-24  241  
3e7e5baaaba780 Alexander Lobakin 2022-06-24  242  	if (small_const_nbits(nbits))
3e7e5baaaba780 Alexander Lobakin 2022-06-24  243  		*dst = *src;
3e7e5baaaba780 Alexander Lobakin 2022-06-24  244  	else
^1da177e4c3f41 Linus Torvalds    2005-04-16 @245  		memcpy(dst, src, len);
^1da177e4c3f41 Linus Torvalds    2005-04-16  246  }
^1da177e4c3f41 Linus Torvalds    2005-04-16  247  

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

Re: [PATCH 3/3] s390/vfio-ap: Add write support to sysfs attr ap_config

[Anthony Krowiak]

On 1/26/24 9:35 AM, Jason J. Herne wrote:
> Allow writing a complete set of masks to ap_config. Doing so will
> cause the vfio-ap driver to replace the vfio-ap mediated device's entire
> state with the given set of masks. If the given state cannot be set, then
> no changes are made to the vfio-ap mediated device.
>
> The format of the data written to ap_config is as follows:
> {amask},{dmask},{cmask}\n
>
> \n is a newline character.
>
> amask, dmask, and cmask are masks identifying which adapters, domains,
> and control domains should be assigned to the mediated device.
>
> The format of a mask is	as follows:
> 0xNN..NN
>
> Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
> The leftmost (highest order) bit represents adapter/domain 0.
>
> For an example set of masks that represent your mdev's current
> configuration, simply cat ap_config.
>
> This attribute is intended to be used by an mdevctl callout script
> supporting the mdev type vfio_ap-passthrough to atomically update a
> vfio-ap mediated device's state.
>
> Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
> ---
>   Documentation/arch/s390/vfio-ap.rst   |  27 ++++
>   drivers/s390/crypto/vfio_ap_ops.c     | 188 +++++++++++++++++++++++---
>   drivers/s390/crypto/vfio_ap_private.h |   6 +-
>   3 files changed, 197 insertions(+), 24 deletions(-)


Maybe the following should be in its own patch since it is a doc change?


> diff --git a/Documentation/arch/s390/vfio-ap.rst b/Documentation/arch/s390/vfio-ap.rst
> index 929ee1c1c940..a94f13916dea 100644
> --- a/Documentation/arch/s390/vfio-ap.rst
> +++ b/Documentation/arch/s390/vfio-ap.rst
> @@ -380,6 +380,33 @@ matrix device.
>       control_domains:
>         A read-only file for displaying the control domain numbers assigned to the
>         vfio_ap mediated device.
> +    ap_config:
> +      A read/write file that, when written to, allows the entire vfio_ap mediated
> +      device's ap configuration to be replaced in one shot. Three masks are given,
> +      one for adapters, one for domains, and one for control domains. If the
> +      given state cannot be set, then no changes are made to the vfio-ap
> +      mediated device.
> +
> +      The format of the data written to ap_config is as follows:
> +      {amask},{dmask},{cmask}\n
> +
> +      \n is a newline character.
> +
> +      amask, dmask, and cmask are masks identifying which adapters, domains,
> +      and control domains should be assigned to the mediated device.
> +
> +      The format of a mask is as follows:
> +      0xNN..NN
> +
> +      Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
> +      The leftmost (highest order) bit represents adapter/domain 0.
> +
> +      For an example set of masks that represent your mdev's current
> +      configuration, simply cat ap_config.
> +
> +      This attribute is intended to be used by automation. End users would be
> +      better served using the respective assign/unassign attributes for adapters
> +      and domains.


s/automation/tooling/ ?

s/for adapters and domains/for adapters, domains and control domains/


>   
>   * functions:
>   
> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
> index 96293683b939..5ad134c1d5e6 100644
> --- a/drivers/s390/crypto/vfio_ap_ops.c
> +++ b/drivers/s390/crypto/vfio_ap_ops.c
> @@ -764,10 +764,11 @@ static int vfio_ap_mdev_probe(struct mdev_device *mdev)
>   static void vfio_ap_mdev_link_queue(struct ap_matrix_mdev *matrix_mdev,
>   				    struct vfio_ap_queue *q)
>   {
> -	if (q) {
> -		q->matrix_mdev = matrix_mdev;
> -		hash_add(matrix_mdev->qtable.queues, &q->mdev_qnode, q->apqn);
> -	}
> +	if (!q || vfio_ap_mdev_get_queue(matrix_mdev, q->apqn))
> +		return;
> +
> +	q->matrix_mdev = matrix_mdev;
> +	hash_add(matrix_mdev->qtable.queues, &q->mdev_qnode, q->apqn);
>   }


The above change has nothing to do with write support for the sysfs 
ap_config attribute. I suppose it could be considered an enhancement to 
ensure a queue that is already linked does not get re-linked, but the 
callers of this function all pass in a queue that has not yet been 
linked; either because it has just been probed or just assigned to the 
mdev. In any case, I don't think this change belongs in this patch.


>   
>   static void vfio_ap_mdev_link_apqn(struct ap_matrix_mdev *matrix_mdev, int apqn)
> @@ -1048,21 +1049,25 @@ static void vfio_ap_mdev_unlink_adapter(struct ap_matrix_mdev *matrix_mdev,
>   	}
>   }
>   
> -static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
> -					    unsigned long apid)
> +static void vfio_ap_mdev_hot_unplug_adapters(struct ap_matrix_mdev *matrix_mdev,
> +					    unsigned long *apids)


The commits for the patch series created to reset queues removed from 
guest's AP configuration are now merged into our master branch and will 
pre-req this series. I've made note of the changes you will need to make 
herein to conform with the changes to the hot unplug functions you 
modified. You may want to take a look in any case because you may be 
able to take advantage - or not - of some other functions without having 
to modify these; for example;

staticintreset_queues_for_apids(structap_matrix_mdev*matrix_mdev,

unsignedlong*apm_reset)


>   {
> -	int loop_cursor;
> -	struct vfio_ap_queue *q;
>   	struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), GFP_KERNEL);


The vfio_ap_queue struct now has a field for adding it to a list of 
queues that need to be reset, so this qtable is now defined:

structlist_headqlist;


> +	struct vfio_ap_queue *q;
> +	unsigned long apid;
> +	int loop_cursor;
>   
>   	hash_init(qtable->queues);
> -	vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, qtable);
>   
> -	if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm)) {
> -		clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
> -		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
> +	for_each_set_bit_inv(apid, apids, AP_DEVICES) {
> +		vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, qtable);
> +
> +		if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm))
> +			clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
>   	}
>   
> +	vfio_ap_mdev_update_guest_apcb(matrix_mdev);
> +
>   	vfio_ap_mdev_reset_queues(qtable);


The call here is now:

vfio_ap_mdev_reset_qlist(&qlist)


>   
>   	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
> @@ -1073,6 +1078,15 @@ static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
>   	kfree(qtable);
>   }
>   
> +static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
> +					    unsigned long apid)
> +{
> +	DECLARE_BITMAP(apids, AP_DEVICES);
> +
> +	set_bit_inv(apid, apids);
> +	vfio_ap_mdev_hot_unplug_adapters(matrix_mdev, apids);
> +}
> +
>   /**
>    * unassign_adapter_store - parses the APID from @buf and clears the
>    * corresponding bit in the mediated matrix device's APM
> @@ -1235,21 +1249,24 @@ static void vfio_ap_mdev_unlink_domain(struct ap_matrix_mdev *matrix_mdev,
>   	}
>   }
>   
> -static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
> -					   unsigned long apqi)
> +static void vfio_ap_mdev_hot_unplug_domains(struct ap_matrix_mdev *matrix_mdev,
> +					   unsigned long *apqis)
>   {
> -	int loop_cursor;
> -	struct vfio_ap_queue *q;
>   	struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), GFP_KERNEL);


The vfio_ap_queue struct now has a field for adding it to a list of 
queues that need to be reset, so this qtable is now defined:

structlist_headqlist;


> +	struct vfio_ap_queue *q;
> +	unsigned long apqi;
> +	int loop_cursor;
>   
>   	hash_init(qtable->queues);
> -	vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, qtable);
>   
> -	if (test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm)) {
> -		clear_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm);
> -		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
> +	for_each_set_bit_inv(apqi, apqis, AP_DOMAINS) {
> +		vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, qtable);
> +
> +		if (test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
> +			clear_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm);
>   	}
>   
> +	vfio_ap_mdev_update_guest_apcb(matrix_mdev);
>   	vfio_ap_mdev_reset_queues(qtable);


The call here is now:

vfio_ap_mdev_reset_qlist(&qlist)


>   
>   	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
> @@ -1260,6 +1277,15 @@ static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
>   	kfree(qtable);
>   }
>   
> +static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
> +					   unsigned long apqi)
> +{
> +	DECLARE_BITMAP(apqis, AP_DOMAINS);
> +
> +	set_bit_inv(apqi, apqis);
> +	vfio_ap_mdev_hot_unplug_domains(matrix_mdev, apqis);
> +}
> +
>   /**
>    * unassign_domain_store - parses the APQI from @buf and clears the
>    * corresponding bit in the mediated matrix device's AQM
> @@ -1527,10 +1553,130 @@ static ssize_t ap_config_show(struct device *dev, struct device_attribute *attr,
>   	return idx;
>   }
>   
> +/* Number of characters needed for a complete hex mask representing the bits in ..  */
> +#define AP_DEVICES_STRLEN	(AP_DEVICES/4 + 3)
> +#define AP_DOMAINS_STRLEN	(AP_DOMAINS/4 + 3)
> +#define AP_CONFIG_STRLEN	(AP_DEVICES_STRLEN + 2 * AP_DOMAINS_STRLEN)
> +
> +static int parse_bitmap(char **strbufptr, unsigned long *bitmap, int nbits)
> +{
> +	char *curmask;
> +
> +	curmask = strsep(strbufptr, ",\n");
> +	if (!curmask)
> +		return -EINVAL;
> +
> +	bitmap_clear(bitmap, 0, nbits);
> +	return ap_hex2bitmap(curmask, bitmap, nbits);
> +}
> +
> +static int ap_matrix_length_check(struct ap_matrix_mdev *matrix_mdev)
> +{
> +	unsigned long bit;
> +
> +	for_each_set_bit_inv(bit, matrix_mdev->matrix.apm, AP_DEVICES) {
> +		if (bit > matrix_mdev->matrix.apm_max)
> +			return -ENODEV;
> +	}
> +
> +	for_each_set_bit_inv(bit, matrix_mdev->matrix.aqm, AP_DOMAINS) {
> +		if (bit > matrix_mdev->matrix.aqm_max)
> +			return -ENODEV;
> +	}
> +
> +	for_each_set_bit_inv(bit, matrix_mdev->matrix.adm, AP_DOMAINS) {
> +		if (bit > matrix_mdev->matrix.adm_max)
> +			return -ENODEV;
> +	}
> +
> +	return 0;
> +}
> +
> +static void ap_matrix_copy(struct ap_matrix *dst, struct ap_matrix *src)
> +{
> +	bitmap_copy(dst->apm, src->apm, AP_DEVICES);
> +	bitmap_copy(dst->aqm, src->aqm, AP_DOMAINS);
> +	bitmap_copy(dst->adm, src->adm, AP_DOMAINS);
> +}
> +
>   static ssize_t ap_config_store(struct device *dev, struct device_attribute *attr,
>   			       const char *buf, size_t count)
>   {
> -	return count;
> +	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
> +	struct ap_matrix m_new, m_old, m_added, m_removed;
> +	unsigned long newbit;
> +	char *newbuf, *rest;
> +	int rc = count;
> +	bool do_update;
> +
> +	newbuf = rest = kstrndup(buf, AP_CONFIG_STRLEN, GFP_KERNEL);
> +	if (!newbuf)
> +		return -ENOMEM;
> +
> +	mutex_lock(&ap_perms_mutex);
> +	get_update_locks_for_mdev(matrix_mdev);
> +
> +	/* Save old state */
> +	ap_matrix_copy(&m_old, &matrix_mdev->matrix);
> +
> +	if (parse_bitmap(&rest, m_new.apm, AP_DEVICES) ||
> +	    parse_bitmap(&rest, m_new.aqm, AP_DOMAINS) ||
> +		parse_bitmap(&rest, m_new.adm, AP_DOMAINS)) {
> +		rc = -EINVAL;
> +		goto out;
> +	}
> +
> +	bitmap_andnot(m_removed.apm, m_old.apm, m_new.apm, AP_DEVICES);
> +	bitmap_andnot(m_removed.aqm, m_old.aqm, m_new.aqm, AP_DOMAINS);
> +	bitmap_andnot(m_added.apm, m_new.apm, m_old.apm, AP_DEVICES);
> +	bitmap_andnot(m_added.aqm, m_new.aqm, m_old.aqm, AP_DOMAINS);


Rather than copying m_new to matrix-mdev->matrix and then possibly 
having to restore it later, why not modify ap_matrix_length_check to 
take a struct ap_matrix and pass in the m_new. If that fails, you can 
bail out without going through the copying steps. Note that you can use 
the vfio_ap_matrix_init(matrix_dev->info, m_new) function to populate 
the apm_max, aqm_max and adm_max fields of the matrix, or you can pass 
in matrix_mdev->matrix and retrieve those values from there.


> +
> +	/* Need new bitmaps in matrix_mdev for validation */
> +	ap_matrix_copy(&matrix_mdev->matrix, &m_new);
> +
> +	/* Ensure new state is valid, else undo new state */
> +	rc = vfio_ap_mdev_validate_masks(matrix_mdev);


If you do what I suggested above, you can skip all of the copying below.


> +	if (rc) {
> +		ap_matrix_copy(&matrix_mdev->matrix, &m_old);
> +		goto out;
> +	}
> +	rc = ap_matrix_length_check(matrix_mdev);
> +	if (rc) {
> +		ap_matrix_copy(&matrix_mdev->matrix, &m_old);
> +		goto out;
> +	}
> +	rc = count;
> +
> +	/* Need old bitmaps in matrix_mdev for unplug/unlink */
> +	ap_matrix_copy(&matrix_mdev->matrix, &m_old);
> +
> +	/* Unlink removed adapters/domains */
> +	vfio_ap_mdev_hot_unplug_adapters(matrix_mdev, m_removed.apm);
> +	vfio_ap_mdev_hot_unplug_domains(matrix_mdev, m_removed.aqm);
> +


I'm wondering if it might eliminate a lot of code duplication if you 
made changes similar to what you did for the 
vfio_ap_mdev_hot_unplug_adapter/domain functions. Maybe you could 
refactor the code in vfio_ap_mdev_assign_adapter/domain_store functions 
into other functions and call them; for example, something like this?:

staticssize_tassign_adapters_store(struct ap_matrix_mdev *matrix_mdev, 
unsigned long *apids)

{

unsigned long apid;

ssize_t apids_set = 0;

for_each_set_bit_inv(apid, apids, AP_DEVICES) {

if(apid > matrix_mdev->matrix.apm_max)

?????? We may have successfully set one or more prior to this, so what 
do we do?

if(test_bit_inv(apid, matrix_mdev->matrix.apm)) {

apids_set += 1

continue;

}

set_bit_inv(apid, matrix_mdev->matrix.apm);

ret = vfio_ap_mdev_validate_masks(matrix_mdev);

if(ret) {

clear_bit_inv(apid, matrix_mdev->matrix.apm);

return 0;

}

vfio_ap_mdev_link_adapter(matrix_mdev, apid);

if(vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered)) {

vfio_ap_mdev_update_guest_apcb(matrix_mdev);

reset_queues_for_apids(matrix_mdev, apm_filtered);

}

apids_set += 1;

}

ret = apids_set;

}


> +	/* Need new bitmaps in matrix_mdev for linking new adapters/domains */
> +	ap_matrix_copy(&matrix_mdev->matrix, &m_new);
> +
> +	/* Link newly added adapters */
> +	for_each_set_bit_inv(newbit, m_added.apm, AP_DEVICES)
> +		vfio_ap_mdev_link_adapter(matrix_mdev, newbit);
> +
> +	for_each_set_bit_inv(newbit, m_added.aqm, AP_DOMAINS)
> +		vfio_ap_mdev_link_domain(matrix_mdev, newbit);
> +
> +	/* filter resources not bound to vfio-ap */
> +	do_update = vfio_ap_mdev_filter_matrix(matrix_mdev->matrix.apm,
> +				matrix_mdev->matrix.aqm, matrix_mdev);


If you decide to reject my suggestion above, you will need to make a 
change to the call to filter above. The vfio_ap_mdev_filter_matrix 
function has changed, so the call would look like this:

     DECLARE_BITMAP(apm_filtered, AP_DEVICES);

     vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered);

The apm_filtered bitmap may contain APIDs filterred from 
matrix_mdev->shadow_apcb, so the associated queues will need to be reset 
(see comment below).
> +	do_update |= vfio_ap_mdev_filter_cdoms(matrix_mdev);
> +
> +	/* Apply changes to shadow apbc if things changed */
> +	if (do_update)
> +		vfio_ap_mdev_update_guest_apcb(matrix_mdev);


After the call above, you will need to call the function below to reset 
the queues associated with any APIDs filtered from matrix_mdev->shadow_apcb:

     reset_queues_for_apids(matrix_mdev, apm_filtered);



> +out:
> +	release_update_locks_for_mdev(matrix_mdev);
> +	mutex_unlock(&ap_perms_mutex);
> +	kfree(newbuf);
> +	return rc;
>   }
>   static DEVICE_ATTR_RW(ap_config);
>   
> diff --git a/drivers/s390/crypto/vfio_ap_private.h b/drivers/s390/crypto/vfio_ap_private.h
> index 88aff8b81f2f..e2cf07c184bf 100644
> --- a/drivers/s390/crypto/vfio_ap_private.h
> +++ b/drivers/s390/crypto/vfio_ap_private.h
> @@ -75,11 +75,11 @@ extern struct ap_matrix_dev *matrix_dev;
>    */
>   struct ap_matrix {
>   	unsigned long apm_max;
> -	DECLARE_BITMAP(apm, 256);
> +	DECLARE_BITMAP(apm, AP_DEVICES);
>   	unsigned long aqm_max;
> -	DECLARE_BITMAP(aqm, 256);
> +	DECLARE_BITMAP(aqm, AP_DOMAINS);
>   	unsigned long adm_max;
> -	DECLARE_BITMAP(adm, 256);
> +	DECLARE_BITMAP(adm, AP_DOMAINS);
>   };
>   
>   /**

Re: [PATCH 3/3] s390/vfio-ap: Add write support to sysfs attr ap_config

[Jason J. Herne]

On 1/29/24 4:43 PM, Anthony Krowiak wrote:
> 
> On 1/26/24 9:35 AM, Jason J. Herne wrote:
>> Allow writing a complete set of masks to ap_config. Doing so will
>> cause the vfio-ap driver to replace the vfio-ap mediated device's entire
>> state with the given set of masks. If the given state cannot be set, then
>> no changes are made to the vfio-ap mediated device.
>>
>> The format of the data written to ap_config is as follows:
>> {amask},{dmask},{cmask}\n
>>
>> \n is a newline character.
>>
>> amask, dmask, and cmask are masks identifying which adapters, domains,
>> and control domains should be assigned to the mediated device.
>>
>> The format of a mask is    as follows:
>> 0xNN..NN
>>
>> Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
>> The leftmost (highest order) bit represents adapter/domain 0.
>>
>> For an example set of masks that represent your mdev's current
>> configuration, simply cat ap_config.
>>
>> This attribute is intended to be used by an mdevctl callout script
>> supporting the mdev type vfio_ap-passthrough to atomically update a
>> vfio-ap mediated device's state.
>>
>> Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
>> ---
>>   Documentation/arch/s390/vfio-ap.rst   |  27 ++++
>>   drivers/s390/crypto/vfio_ap_ops.c     | 188 +++++++++++++++++++++++---
>>   drivers/s390/crypto/vfio_ap_private.h |   6 +-
>>   3 files changed, 197 insertions(+), 24 deletions(-)
> 
> 
> Maybe the following should be in its own patch since it is a doc change?

Fixed for v2.

>> diff --git a/Documentation/arch/s390/vfio-ap.rst 
>> b/Documentation/arch/s390/vfio-ap.rst
>> index 929ee1c1c940..a94f13916dea 100644
>> --- a/Documentation/arch/s390/vfio-ap.rst
>> +++ b/Documentation/arch/s390/vfio-ap.rst
>> @@ -380,6 +380,33 @@ matrix device.
>>       control_domains:
>>         A read-only file for displaying the control domain numbers 
>> assigned to the
>>         vfio_ap mediated device.
>> +    ap_config:
>> +      A read/write file that, when written to, allows the entire 
>> vfio_ap mediated
>> +      device's ap configuration to be replaced in one shot. Three 
>> masks are given,
>> +      one for adapters, one for domains, and one for control domains. 
>> If the
>> +      given state cannot be set, then no changes are made to the vfio-ap
>> +      mediated device.
>> +
>> +      The format of the data written to ap_config is as follows:
>> +      {amask},{dmask},{cmask}\n
>> +
>> +      \n is a newline character.
>> +
>> +      amask, dmask, and cmask are masks identifying which adapters, 
>> domains,
>> +      and control domains should be assigned to the mediated device.
>> +
>> +      The format of a mask is as follows:
>> +      0xNN..NN
>> +
>> +      Where NN..NN is 64 hexadecimal characters representing a 
>> 256-bit value.
>> +      The leftmost (highest order) bit represents adapter/domain 0.
>> +
>> +      For an example set of masks that represent your mdev's current
>> +      configuration, simply cat ap_config.
>> +
>> +      This attribute is intended to be used by automation. End users 
>> would be
>> +      better served using the respective assign/unassign attributes 
>> for adapters
>> +      and domains.
> 
> 
> s/automation/tooling/ ?
> 
> s/for adapters and domains/for adapters, domains and control domains/

Fixed for v2.

>>   * functions:
>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c 
>> b/drivers/s390/crypto/vfio_ap_ops.c
>> index 96293683b939..5ad134c1d5e6 100644
>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>> @@ -764,10 +764,11 @@ static int vfio_ap_mdev_probe(struct mdev_device 
>> *mdev)
>>   static void vfio_ap_mdev_link_queue(struct ap_matrix_mdev *matrix_mdev,
>>                       struct vfio_ap_queue *q)
>>   {
>> -    if (q) {
>> -        q->matrix_mdev = matrix_mdev;
>> -        hash_add(matrix_mdev->qtable.queues, &q->mdev_qnode, q->apqn);
>> -    }
>> +    if (!q || vfio_ap_mdev_get_queue(matrix_mdev, q->apqn))
>> +        return;
>> +
>> +    q->matrix_mdev = matrix_mdev;
>> +    hash_add(matrix_mdev->qtable.queues, &q->mdev_qnode, q->apqn);
>>   }
> 
> 
> The above change has nothing to do with write support for the sysfs 
> ap_config attribute. I suppose it could be considered an enhancement to 
> ensure a queue that is already linked does not get re-linked, but the 
> callers of this function all pass in a queue that has not yet been 
> linked; either because it has just been probed or just assigned to the 
> mdev. In any case, I don't think this change belongs in this patch.
> 

Split out into separate patch for v2.

>>   static void vfio_ap_mdev_link_apqn(struct ap_matrix_mdev 
>> *matrix_mdev, int apqn)
>> @@ -1048,21 +1049,25 @@ static void vfio_ap_mdev_unlink_adapter(struct 
>> ap_matrix_mdev *matrix_mdev,
>>       }
>>   }
>> -static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev 
>> *matrix_mdev,
>> -                        unsigned long apid)
>> +static void vfio_ap_mdev_hot_unplug_adapters(struct ap_matrix_mdev 
>> *matrix_mdev,
>> +                        unsigned long *apids)
> 
> 
> The commits for the patch series created to reset queues removed from 
> guest's AP configuration are now merged into our master branch and will 
> pre-req this series. I've made note of the changes you will need to make 
> herein to conform with the changes to the hot unplug functions you 
> modified. You may want to take a look in any case because you may be 
> able to take advantage - or not - of some other functions without having 
> to modify these; for example;

Fixed for v2.

> staticintreset_queues_for_apids(structap_matrix_mdev*matrix_mdev,
> 
> unsignedlong*apm_reset)
> 
> 
>>   {
>> -    int loop_cursor;
>> -    struct vfio_ap_queue *q;
>>       struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), 
>> GFP_KERNEL);
> 
> 
> The vfio_ap_queue struct now has a field for adding it to a list of 
> queues that need to be reset, so this qtable is now defined:
> 
> structlist_headqlist;
> 
> 
>> +    struct vfio_ap_queue *q;
>> +    unsigned long apid;
>> +    int loop_cursor;
>>       hash_init(qtable->queues);
>> -    vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, qtable);
>> -    if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm)) {
>> -        clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
>> -        vfio_ap_mdev_update_guest_apcb(matrix_mdev);
>> +    for_each_set_bit_inv(apid, apids, AP_DEVICES) {
>> +        vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, qtable);
>> +
>> +        if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm))
>> +            clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
>>       }
>> +    vfio_ap_mdev_update_guest_apcb(matrix_mdev);
>> +
>>       vfio_ap_mdev_reset_queues(qtable);
> 
> 
> The call here is now:
> 
> vfio_ap_mdev_reset_qlist(&qlist)
> 
> 
>>       hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
>> @@ -1073,6 +1078,15 @@ static void 
>> vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
>>       kfree(qtable);
>>   }
>> +static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev 
>> *matrix_mdev,
>> +                        unsigned long apid)
>> +{
>> +    DECLARE_BITMAP(apids, AP_DEVICES);
>> +
>> +    set_bit_inv(apid, apids);
>> +    vfio_ap_mdev_hot_unplug_adapters(matrix_mdev, apids);
>> +}
>> +
>>   /**
>>    * unassign_adapter_store - parses the APID from @buf and clears the
>>    * corresponding bit in the mediated matrix device's APM
>> @@ -1235,21 +1249,24 @@ static void vfio_ap_mdev_unlink_domain(struct 
>> ap_matrix_mdev *matrix_mdev,
>>       }
>>   }
>> -static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev 
>> *matrix_mdev,
>> -                       unsigned long apqi)
>> +static void vfio_ap_mdev_hot_unplug_domains(struct ap_matrix_mdev 
>> *matrix_mdev,
>> +                       unsigned long *apqis)
>>   {
>> -    int loop_cursor;
>> -    struct vfio_ap_queue *q;
>>       struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), 
>> GFP_KERNEL);
> 
> 
> The vfio_ap_queue struct now has a field for adding it to a list of 
> queues that need to be reset, so this qtable is now defined:
> 
> structlist_headqlist;
> 
> 
>> +    struct vfio_ap_queue *q;
>> +    unsigned long apqi;
>> +    int loop_cursor;
>>       hash_init(qtable->queues);
>> -    vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, qtable);
>> -    if (test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm)) {
>> -        clear_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm);
>> -        vfio_ap_mdev_update_guest_apcb(matrix_mdev);
>> +    for_each_set_bit_inv(apqi, apqis, AP_DOMAINS) {
>> +        vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, qtable);
>> +
>> +        if (test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
>> +            clear_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm);
>>       }
>> +    vfio_ap_mdev_update_guest_apcb(matrix_mdev);
>>       vfio_ap_mdev_reset_queues(qtable);
> 
> 
> The call here is now:
> 
> vfio_ap_mdev_reset_qlist(&qlist)
> 
> 
>>       hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
>> @@ -1260,6 +1277,15 @@ static void 
>> vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
>>       kfree(qtable);
>>   }
>> +static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev 
>> *matrix_mdev,
>> +                       unsigned long apqi)
>> +{
>> +    DECLARE_BITMAP(apqis, AP_DOMAINS);
>> +
>> +    set_bit_inv(apqi, apqis);
>> +    vfio_ap_mdev_hot_unplug_domains(matrix_mdev, apqis);
>> +}
>> +
>>   /**
>>    * unassign_domain_store - parses the APQI from @buf and clears the
>>    * corresponding bit in the mediated matrix device's AQM
>> @@ -1527,10 +1553,130 @@ static ssize_t ap_config_show(struct device 
>> *dev, struct device_attribute *attr,
>>       return idx;
>>   }
>> +/* Number of characters needed for a complete hex mask representing 
>> the bits in ..  */
>> +#define AP_DEVICES_STRLEN    (AP_DEVICES/4 + 3)
>> +#define AP_DOMAINS_STRLEN    (AP_DOMAINS/4 + 3)
>> +#define AP_CONFIG_STRLEN    (AP_DEVICES_STRLEN + 2 * AP_DOMAINS_STRLEN)
>> +
>> +static int parse_bitmap(char **strbufptr, unsigned long *bitmap, int 
>> nbits)
>> +{
>> +    char *curmask;
>> +
>> +    curmask = strsep(strbufptr, ",\n");
>> +    if (!curmask)
>> +        return -EINVAL;
>> +
>> +    bitmap_clear(bitmap, 0, nbits);
>> +    return ap_hex2bitmap(curmask, bitmap, nbits);
>> +}
>> +
>> +static int ap_matrix_length_check(struct ap_matrix_mdev *matrix_mdev)
>> +{
>> +    unsigned long bit;
>> +
>> +    for_each_set_bit_inv(bit, matrix_mdev->matrix.apm, AP_DEVICES) {
>> +        if (bit > matrix_mdev->matrix.apm_max)
>> +            return -ENODEV;
>> +    }
>> +
>> +    for_each_set_bit_inv(bit, matrix_mdev->matrix.aqm, AP_DOMAINS) {
>> +        if (bit > matrix_mdev->matrix.aqm_max)
>> +            return -ENODEV;
>> +    }
>> +
>> +    for_each_set_bit_inv(bit, matrix_mdev->matrix.adm, AP_DOMAINS) {
>> +        if (bit > matrix_mdev->matrix.adm_max)
>> +            return -ENODEV;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static void ap_matrix_copy(struct ap_matrix *dst, struct ap_matrix *src)
>> +{
>> +    bitmap_copy(dst->apm, src->apm, AP_DEVICES);
>> +    bitmap_copy(dst->aqm, src->aqm, AP_DOMAINS);
>> +    bitmap_copy(dst->adm, src->adm, AP_DOMAINS);
>> +}
>> +
>>   static ssize_t ap_config_store(struct device *dev, struct 
>> device_attribute *attr,
>>                      const char *buf, size_t count)
>>   {
>> -    return count;
>> +    struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
>> +    struct ap_matrix m_new, m_old, m_added, m_removed;
>> +    unsigned long newbit;
>> +    char *newbuf, *rest;
>> +    int rc = count;
>> +    bool do_update;
>> +
>> +    newbuf = rest = kstrndup(buf, AP_CONFIG_STRLEN, GFP_KERNEL);
>> +    if (!newbuf)
>> +        return -ENOMEM;
>> +
>> +    mutex_lock(&ap_perms_mutex);
>> +    get_update_locks_for_mdev(matrix_mdev);
>> +
>> +    /* Save old state */
>> +    ap_matrix_copy(&m_old, &matrix_mdev->matrix);
>> +
>> +    if (parse_bitmap(&rest, m_new.apm, AP_DEVICES) ||
>> +        parse_bitmap(&rest, m_new.aqm, AP_DOMAINS) ||
>> +        parse_bitmap(&rest, m_new.adm, AP_DOMAINS)) {
>> +        rc = -EINVAL;
>> +        goto out;
>> +    }
>> +
>> +    bitmap_andnot(m_removed.apm, m_old.apm, m_new.apm, AP_DEVICES);
>> +    bitmap_andnot(m_removed.aqm, m_old.aqm, m_new.aqm, AP_DOMAINS);
>> +    bitmap_andnot(m_added.apm, m_new.apm, m_old.apm, AP_DEVICES);
>> +    bitmap_andnot(m_added.aqm, m_new.aqm, m_old.aqm, AP_DOMAINS);
> 
> 
> Rather than copying m_new to matrix-mdev->matrix and then possibly 
> having to restore it later, why not modify ap_matrix_length_check to 
> take a struct ap_matrix and pass in the m_new. If that fails, you can 
> bail out without going through the copying steps. Note that you can use 
> the vfio_ap_matrix_init(matrix_dev->info, m_new) function to populate 
> the apm_max, aqm_max and adm_max fields of the matrix, or you can pass 
> in matrix_mdev->matrix and retrieve those values from there.
> 
> 

I actually tried to implement this. Everything was going great until I 
hit this check:

     /*
      * If the input apm and aqm are fields of the matrix_mdev
      * object, then move on to the next matrix_mdev.
      */
     if (mdev_apm == matrix_mdev->matrix.apm &&
         mdev_aqm == matrix_mdev->matrix.aqm)
         continue;

I had refactored vfio_ap_mdev_validate_masks to accept an ap_matrix 
object instead of a matrix_mdev. And for obvious reasons, the m_new 
ap_matrix I passed in that wasn't owned by the matrix_mdev failed this 
check.

I could Refactor this routine to do something different, and modify all 
callers. But the scope of this has gotten out of hand for a minor 
simplification :)

Long story short, no change here for V2.

>> +
>> +    /* Need new bitmaps in matrix_mdev for validation */
>> +    ap_matrix_copy(&matrix_mdev->matrix, &m_new);
>> +
>> +    /* Ensure new state is valid, else undo new state */
>> +    rc = vfio_ap_mdev_validate_masks(matrix_mdev);
> 
> 
> If you do what I suggested above, you can skip all of the copying below.
> 
> 
>> +    if (rc) {
>> +        ap_matrix_copy(&matrix_mdev->matrix, &m_old);
>> +        goto out;
>> +    }
>> +    rc = ap_matrix_length_check(matrix_mdev);
>> +    if (rc) {
>> +        ap_matrix_copy(&matrix_mdev->matrix, &m_old);
>> +        goto out;
>> +    }
>> +    rc = count;
>> +
>> +    /* Need old bitmaps in matrix_mdev for unplug/unlink */
>> +    ap_matrix_copy(&matrix_mdev->matrix, &m_old);
>> +
>> +    /* Unlink removed adapters/domains */
>> +    vfio_ap_mdev_hot_unplug_adapters(matrix_mdev, m_removed.apm);
>> +    vfio_ap_mdev_hot_unplug_domains(matrix_mdev, m_removed.aqm);
>> +
> 
> 
> I'm wondering if it might eliminate a lot of code duplication if you 
> made changes similar to what you did for the 
> vfio_ap_mdev_hot_unplug_adapter/domain functions. Maybe you could 
> refactor the code in vfio_ap_mdev_assign_adapter/domain_store functions 
> into other functions and call them; for example, something like this?:
> 
> staticssize_tassign_adapters_store(struct ap_matrix_mdev *matrix_mdev, 
> unsigned long *apids)
> 
> {
> 
> unsigned long apid;
> 
> ssize_t apids_set = 0;
> 
> for_each_set_bit_inv(apid, apids, AP_DEVICES) {
> 
> if(apid > matrix_mdev->matrix.apm_max)
> 
> ?????? We may have successfully set one or more prior to this, so what 
> do we do?
> 
> if(test_bit_inv(apid, matrix_mdev->matrix.apm)) {
> 
> apids_set += 1
> 
> continue;
> 
> }
> 
> set_bit_inv(apid, matrix_mdev->matrix.apm);
> 
> ret = vfio_ap_mdev_validate_masks(matrix_mdev);
> 
> if(ret) {
> 
> clear_bit_inv(apid, matrix_mdev->matrix.apm);
> 
> return 0;
> 
> }
> 
> vfio_ap_mdev_link_adapter(matrix_mdev, apid);
> 
> if(vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered)) {
> 
> vfio_ap_mdev_update_guest_apcb(matrix_mdev);
> 
> reset_queues_for_apids(matrix_mdev, apm_filtered);
> 
> }
> 
> apids_set += 1;
> 
> }
> 
> ret = apids_set;
> 
> }
> 
> 

There is some duplication between the ap_config_write and 
assign_adapter_write paths. I assume I could create a base function that 
"does it all" adds/removes adapters/domains/ctrl-domains and call that 
from ap_config_write, assign_adapter_write, assign_domain_write, and 
assign_control_domain_write.

I'm not convinced it is going to be a productive exercise though. The 
ap_config path is really doing multiple simpler jobs at once, all while 
remembering history so we can bail out if something fails. Any helper 
routine would have to unset and set adapters, domains, and control 
domains all at once.

Also, your comment with the string of questions marks above highlights 
part of the issue with a combined routine. ap_config path needs logic to 
handle this problem, and injecting that logic into the main path 
wouldn't really make sense.

We could remove most/all of the code in the normal assign functions and 
instead call the ap_config path. That should work. But it could make 
understanding those code paths quite a bit more cumbersome. Not a big 
deal to you and I, who know them already. But it might be an issue for 
those who come later. Also, I'm not convinced it would save a 
significant number of lines.

I'm in favor of keeping the paths separate. No changes for V2.


>> +    /* Need new bitmaps in matrix_mdev for linking new 
>> adapters/domains */
>> +    ap_matrix_copy(&matrix_mdev->matrix, &m_new);
>> +
>> +    /* Link newly added adapters */
>> +    for_each_set_bit_inv(newbit, m_added.apm, AP_DEVICES)
>> +        vfio_ap_mdev_link_adapter(matrix_mdev, newbit);
>> +
>> +    for_each_set_bit_inv(newbit, m_added.aqm, AP_DOMAINS)
>> +        vfio_ap_mdev_link_domain(matrix_mdev, newbit);
>> +
>> +    /* filter resources not bound to vfio-ap */
>> +    do_update = vfio_ap_mdev_filter_matrix(matrix_mdev->matrix.apm,
>> +                matrix_mdev->matrix.aqm, matrix_mdev);
> 
> 
> If you decide to reject my suggestion above, you will need to make a 
> change to the call to filter above. The vfio_ap_mdev_filter_matrix 
> function has changed, so the call would look like this:
> 
>      DECLARE_BITMAP(apm_filtered, AP_DEVICES);
> 
>      vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered);
> 
> The apm_filtered bitmap may contain APIDs filterred from 
> matrix_mdev->shadow_apcb, so the associated queues will need to be reset 
> (see comment below).

Fixed for v2.

>> +    do_update |= vfio_ap_mdev_filter_cdoms(matrix_mdev);
>> +
>> +    /* Apply changes to shadow apbc if things changed */
>> +    if (do_update)
>> +        vfio_ap_mdev_update_guest_apcb(matrix_mdev);
> 
> 
> After the call above, you will need to call the function below to reset 
> the queues associated with any APIDs filtered from 
> matrix_mdev->shadow_apcb:
> 
>      reset_queues_for_apids(matrix_mdev, apm_filtered);
> 
> 
> 

Fixed for v2.

V2 will be posted soon, likely tomorrow.

Re: [PATCH 0/3] s390/vfio-ap: queue_configuration sysfs attribute for mdevctl automation

[Anthony Krowiak]

Isn't this v4 of this series?

On 1/26/24 9:35 AM, Jason J. Herne wrote:
> Mdevctl requires a way to atomically query and atomically update a vfio-ap
> mdev's current state. This patch set creates the queue_configuration sysfs
> attribute.  This new attribute allows reading and writing an mdev's entire
> state in one go. If a newly written state is invalid for any reason the entire
> state is rejected and the target mdev remains unchanged.
>
> Jason J. Herne (3):
>    s390/ap: Externalize AP bus specific bitmap reading function
>    s390/vfio-ap: Add sysfs attr, queue_configuration, to export mdev
>      state
>    s390/vfio-ap: Add write support to sysfs attr ap_config
>
>   Documentation/arch/s390/vfio-ap.rst   |  27 ++++
>   drivers/s390/crypto/ap_bus.c          |  13 +-
>   drivers/s390/crypto/ap_bus.h          |  22 +++
>   drivers/s390/crypto/vfio_ap_ops.c     | 213 +++++++++++++++++++++++---
>   drivers/s390/crypto/vfio_ap_private.h |   6 +-
>   5 files changed, 248 insertions(+), 33 deletions(-)
>

Re: [PATCH 0/3] s390/vfio-ap: queue_configuration sysfs attribute for mdevctl automation

[Matthew Rosato]

On 1/26/24 9:35 AM, Jason J. Herne wrote:
> Mdevctl requires a way to atomically query and atomically update a vfio-ap
> mdev's current state. This patch set creates the queue_configuration sysfs

s/queue_configuration/ap_config/

Same comment also for patch 1 commit description + patch 2 title.