public inbox for linux-s390@vger.kernel.org
 help / color / mirror / Atom feed
From: Christoph Schlameuss <schlameuss@linux.ibm.com>
To: linux-s390@vger.kernel.org, kvm@vger.kernel.org
Cc: "Janosch Frank" <frankja@linux.ibm.com>,
	"Claudio Imbrenda" <imbrenda@linux.ibm.com>,
	"Nico Böhr" <nrb@linux.ibm.com>,
	"David Hildenbrand" <david@kernel.org>,
	"Thomas Huth" <thuth@redhat.com>,
	"Christoph Schlameuss" <schlameuss@linux.ibm.com>
Subject: [kvm-unit-tests PATCH v4 4/6] s390x: sclp: Use sclp_feat_check directly to read DIAG318 feature bit
Date: Thu, 23 Apr 2026 16:26:48 +0200	[thread overview]
Message-ID: <20260423-vsie-stfle-fac-v4-4-32943fe43394@linux.ibm.com> (raw)
In-Reply-To: <20260423-vsie-stfle-fac-v4-0-32943fe43394@linux.ibm.com>

The additional entry in struct ReadInfo is only used to set sclp_facilities
where we are aware where these bits actually are in _read_info. So it is
more readable to directly check the bit here.

While at it order feat checks by byte and bit.

Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
---
 lib/s390x/sclp.c | 3 +--
 lib/s390x/sclp.h | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/lib/s390x/sclp.c b/lib/s390x/sclp.c
index 1ffcf448e558..9d9fd3cbcb8c 100644
--- a/lib/s390x/sclp.c
+++ b/lib/s390x/sclp.c
@@ -157,8 +157,6 @@ void sclp_facilities_setup(void)
 	assert(read_info);
 
 	cpu = sclp_get_cpu_entries();
-	if (read_info->offset_cpu > 134)
-		sclp_facilities.has_diag318 = read_info->byte_134_diag318;
 	sclp_facilities.has_sop = sclp_feat_check(80, SCLP_FEAT_80_BIT_SOP);
 	sclp_facilities.has_gsls = sclp_feat_check(85, SCLP_FEAT_85_BIT_GSLS);
 	sclp_facilities.has_esop = sclp_feat_check(85, SCLP_FEAT_85_BIT_ESOP);
@@ -168,6 +166,7 @@ void sclp_facilities_setup(void)
 	sclp_facilities.has_esca = sclp_feat_check(116, SCLP_FEAT_116_BIT_ESCA);
 	sclp_facilities.has_ibs = sclp_feat_check(117, SCLP_FEAT_117_BIT_IBS);
 	sclp_facilities.has_pfmfi = sclp_feat_check(117, SCLP_FEAT_117_BIT_PFMFI);
+	sclp_facilities.has_diag318 = sclp_feat_check(134, SCLP_FEAT_134_BIT_DIAG318);
 
 	for (i = 0; i < read_info->entries_cpu; i++, cpu++) {
 		/*
diff --git a/lib/s390x/sclp.h b/lib/s390x/sclp.h
index 42a2f2e9f25a..87af429b5798 100644
--- a/lib/s390x/sclp.h
+++ b/lib/s390x/sclp.h
@@ -144,6 +144,7 @@ struct sclp_facilities {
 #define SCLP_FEAT_116_BIT_ESCA		4
 #define SCLP_FEAT_117_BIT_PFMFI		1
 #define SCLP_FEAT_117_BIT_IBS		2
+#define SCLP_FEAT_134_BIT_DIAG318	0
 
 typedef struct ReadInfo {
 	SCCBHeader h;
@@ -169,8 +170,6 @@ typedef struct ReadInfo {
 	uint8_t  _reserved5[124 - 122];     /* 122-123 */
 	uint32_t hmfai;
 	uint8_t reserved7[134 - 128];       /* 128-133 */
-	uint8_t byte_134_diag318 : 1;
-	uint8_t : 7;
 	/*
 	 * At the end of the ReadInfo, there are also the CPU entries (see
 	 * struct CPUEntry). When the Extended-Length SCCB (ELS) feature is

-- 
2.53.0


  parent reply	other threads:[~2026-04-23 14:27 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-23 14:26 [kvm-unit-tests PATCH v4 0/6] s390x: Add test for STFLE interpretive execution (format-2) Christoph Schlameuss
2026-04-23 14:26 ` [kvm-unit-tests PATCH v4 1/6] s390x: snippets: Add reset_guest() to lib Christoph Schlameuss
2026-04-23 14:26 ` [kvm-unit-tests PATCH v4 2/6] s390x: sclp: Remove unnecessary padding from struct sclp_facilities Christoph Schlameuss
2026-04-23 14:26 ` [kvm-unit-tests PATCH v4 3/6] s390x: sclp: Check sclp byte before reading feature bits Christoph Schlameuss
2026-04-23 14:26 ` Christoph Schlameuss [this message]
2026-04-23 14:46   ` [kvm-unit-tests PATCH v4 4/6] s390x: sclp: Use sclp_feat_check directly to read DIAG318 feature bit Janosch Frank
2026-04-23 14:26 ` [kvm-unit-tests PATCH v4 5/6] s390x: sclp: Add detection of alternate STFLE facilities Christoph Schlameuss
2026-04-23 14:45   ` Janosch Frank
2026-04-23 14:26 ` [kvm-unit-tests PATCH v4 6/6] s390x: Add test for STFLE interpretive execution (format-2) Christoph Schlameuss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260423-vsie-stfle-fac-v4-4-32943fe43394@linux.ibm.com \
    --to=schlameuss@linux.ibm.com \
    --cc=david@kernel.org \
    --cc=frankja@linux.ibm.com \
    --cc=imbrenda@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=nrb@linux.ibm.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox