[PATCH] [RFC] ubsan: turn off UBSAN_ALIGNMENT on s390

[PATCH] [RFC] ubsan: turn off UBSAN_ALIGNMENT on s390

[Arnd Bergmann]

From: Arnd Bergmann <arnd@arndb.de>

Testing randconfig builds on s390 with gcc-15, I came across a number of
seemingly unrelated build failures that ended up all being caused
by the -fsanitize=alignment option:

s390-linux-ld: kernel/sched/build_policy.o: in function `thread_group_cputime':
include/linux/seqlock.h:1286:(.text+0x1f738): undefined reference to `__scoped_seqlock_bug'

lib/tests/overflow_kunit.c: In function 'same_type_test':
lib/tests/overflow_kunit.c:1008:13: note: variable tracking size limit exceeded with '-fvar-tracking-assignments', retrying without

fs/fat/fat_test.c: In function 'fat_clus_to_blknr_test':
fs/fat/fat_test.c:33:1: error: the frame size of 4736 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
lib/crypto/chacha-block-generic.c: In function 'chacha_permute':
lib/crypto/chacha-block-generic.c:65:1: error: the frame size of 2000 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
lib/crypto/sha3.c: In function 'sha3_keccakf_generic':
lib/crypto/sha3.c:175:1: error: the frame size of 2248 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
lib/zstd/decompress/huf_decompress.c: In function 'HUF_decompress4X2_usingDTable_internal_default':
lib/zstd/decompress/huf_decompress.c:1512:1: error: the frame size of 1352 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]

What I observe here is a huge increase in generated calls to
__ubsan_handle_type_mismatch_v1() that ends up thowing off a number of
compiler optimizations that the kernel relies on.

I have not been able to figure out why this happens on s390 but not arm64,
arm or x86, if other toolchain versions are affected by the same thing,
and if this is a problem in gcc or in the kernel itself, e.g. some
variable being identified as unaligned when it should be aligned.

This clearly needs more investigation to figure out properly what is
going on, but turning it off is currently required for randconfig testing.

Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: kasan-dev@googlegroups.com
Cc: linux-hardening@vger.kernel.org
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 lib/Kconfig.ubsan | 1 +
 1 file changed, 1 insertion(+)

diff --git a/lib/Kconfig.ubsan b/lib/Kconfig.ubsan
index 1ecaae7064d2..3fc03a6b5af4 100644
--- a/lib/Kconfig.ubsan
+++ b/lib/Kconfig.ubsan
@@ -152,6 +152,7 @@ config UBSAN_ENUM
 
 config UBSAN_ALIGNMENT
 	bool "Perform checking for misaligned pointer usage"
+	depends on !S390 || BROKEN
 	default !HAVE_EFFICIENT_UNALIGNED_ACCESS
 	depends on !UBSAN_TRAP && !COMPILE_TEST
 	depends on $(cc-option,-fsanitize=alignment)
-- 
2.39.5

Re: [PATCH] [RFC] ubsan: turn off UBSAN_ALIGNMENT on s390

[Heiko Carstens]

On Fri, May 15, 2026 at 11:19:54AM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> Testing randconfig builds on s390 with gcc-15, I came across a number of
> seemingly unrelated build failures that ended up all being caused
> by the -fsanitize=alignment option:
> 
> s390-linux-ld: kernel/sched/build_policy.o: in function `thread_group_cputime':
> include/linux/seqlock.h:1286:(.text+0x1f738): undefined reference to `__scoped_seqlock_bug'

Does this only happen with __scoped_seqlock_bug()?
I just enabled UBSAN_ALIGNMENT, and with gcc-16 I can see this too.

> What I observe here is a huge increase in generated calls to
> __ubsan_handle_type_mismatch_v1() that ends up thowing off a number of
> compiler optimizations that the kernel relies on.
> 
> I have not been able to figure out why this happens on s390 but not arm64,
> arm or x86, if other toolchain versions are affected by the same thing,
> and if this is a problem in gcc or in the kernel itself, e.g. some
> variable being identified as unaligned when it should be aligned.
> 
> This clearly needs more investigation to figure out properly what is
> going on, but turning it off is currently required for randconfig testing.
...
> ---
>  lib/Kconfig.ubsan | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/lib/Kconfig.ubsan b/lib/Kconfig.ubsan
> index 1ecaae7064d2..3fc03a6b5af4 100644
> --- a/lib/Kconfig.ubsan
> +++ b/lib/Kconfig.ubsan
> @@ -152,6 +152,7 @@ config UBSAN_ENUM
>  
>  config UBSAN_ALIGNMENT
>  	bool "Perform checking for misaligned pointer usage"
> +	depends on !S390 || BROKEN

Wouldn't it be more appropriate to extend the ifdef at __scoped_seqlock_bug()
which emits an empty function for exactly this reason for some gcc versions
and kernel configs?

That is: add CONFIG_UBSAN_ALIGNMENT to the list (copy-pasted - white space
damage below)?

diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 5a40252b8334..18affa4d21a6 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -1259,7 +1259,7 @@ static __always_inline void __scoped_seqlock_cleanup(struct ss_tmp *sst)
 
 extern void __scoped_seqlock_invalid_target(void);
 
-#if (defined(CONFIG_CC_IS_GCC) && CONFIG_GCC_VERSION < 90000) || defined(CONFIG_KASAN)
+#if (defined(CONFIG_CC_IS_GCC) && CONFIG_GCC_VERSION < 90000) || defined(CONFIG_KASAN) || defined(CONFIG_UBSAN_ALIGNMENT)
 /*
  * For some reason some GCC-8 architectures (nios2, alpha) have trouble
  * determining that the ss_done state is impossible in __scoped_seqlock_next()