From: Stefan Haberland <sth@linux.ibm.com>
To: linux-s390@vger.kernel.org
Cc: Jan Hoeppner <hoeppner@linux.ibm.com>,
Eduard Shishkin <edward6@linux.ibm.com>
Subject: [PATCH v6 16/18] s390/dasd: Report ESE capability and format mode at device online
Date: Sat, 1 Aug 2026 13:10:06 +0200 [thread overview]
Message-ID: <20260801111008.3391031-17-sth@linux.ibm.com> (raw)
In-Reply-To: <20260801111008.3391031-1-sth@linux.ibm.com>
Extend the device information line logged when a volume comes online with
the ESE hardware capability and the on-disk format mode. The format mode
(full or on demand) is derived from the on-disk format label alone, so a
volume that is not backed by ESE hardware but was still formatted on
demand is reported correctly.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
---
drivers/s390/block/dasd_eckd.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 69a6a462e3e2..428a691ed5a1 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2522,6 +2522,7 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
struct dasd_device *device = block->base;
struct dasd_eckd_private *private = device->private;
struct eckd_count *count_area;
+ const char *ese_str, *fmt_str;
unsigned int sb, blk_per_trk;
int status, i;
struct dasd_ccw_req *init_cqr;
@@ -2608,15 +2609,29 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
private->rdc_data.trk_per_cyl *
blk_per_trk);
+ /*
+ * Report the ESE hardware capability and the format mode. The mode
+ * comes from dasd_eckd_on_demand_format() (the on-disk label, or the
+ * ESE state when no label is present), matching the on_demand_formatting
+ * sysfs attribute.
+ */
+ ese_str = dasd_eckd_ese_capable(device) ? ", ESE" : "";
+ fmt_str = "";
+ if (dasd_eckd_on_demand_format(device))
+ fmt_str = ", on-demand format";
+ else if (dasd_eckd_ese_capable(device))
+ fmt_str = ", full format";
+
dev_info(&device->cdev->dev,
- "DASD with %u KB/block, %lu KB total size, %u KB/track, "
- "%s\n", (block->bp_block >> 10),
+ "DASD with %u KB/block, %lu KB total size, %u KB/track, %s%s%s\n",
+ (block->bp_block >> 10),
(((unsigned long) private->real_cyl *
private->rdc_data.trk_per_cyl *
blk_per_trk * (block->bp_block >> 9)) >> 1),
((blk_per_trk * block->bp_block) >> 10),
private->uses_cdl ?
- "compatible disk layout" : "linux disk layout");
+ "compatible disk layout" : "linux disk layout",
+ ese_str, fmt_str);
return 0;
}
--
2.53.0
next prev parent reply other threads:[~2026-08-01 11:10 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-01 11:09 [PATCH v6 00/18] s390/dasd: ESE thin-provisioning performance improvements Stefan Haberland
2026-08-01 11:09 ` [PATCH v6 01/18] s390/dasd: Do not complete a failed ESE read as successful Stefan Haberland
2026-08-01 11:27 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 02/18] s390/dasd: Propagate partial completion length across ERP recovery Stefan Haberland
2026-08-01 11:21 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 03/18] s390/dasd: Guard sysfs discipline callbacks against unallocated private data Stefan Haberland
2026-08-01 11:40 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 04/18] s390/dasd: Optimize max blocks per request for track alignment Stefan Haberland
2026-08-01 11:20 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 05/18] s390/dasd: Use GFP_KERNEL in dasd_alloc_device() Stefan Haberland
2026-08-01 11:21 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 06/18] s390/dasd: Add defines for the Extended Address Volume track address Stefan Haberland
2026-08-01 11:13 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 07/18] s390/dasd: Add infrastructure for ESE full-track write Stefan Haberland
2026-08-01 11:32 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 08/18] s390/dasd: Add range-based format-track collision detection Stefan Haberland
2026-08-01 11:36 ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 09/18] s390/dasd: Extend prepare_itcw() to support WRITE_FULL_TRACK Stefan Haberland
2026-08-01 11:37 ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 10/18] s390/dasd: Add dasd_eckd_build_cp_tpm_writefulltrack() Stefan Haberland
2026-08-01 11:29 ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 11/18] s390/dasd: Use WRITE_FULL_TRACK in ESE format handler Stefan Haberland
2026-08-01 11:39 ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 12/18] s390/dasd: Add full_track_bias to control fulltrack write mode Stefan Haberland
2026-08-01 11:27 ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 13/18] s390/dasd: Derive adaptive ESE fulltrack heuristic from ft_bias Stefan Haberland
2026-08-01 11:46 ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 14/18] s390/dasd: Stamp a format label into newly formatted volumes Stefan Haberland
2026-08-01 11:33 ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 15/18] s390/dasd: Detect ESE volumes from the on-disk format label Stefan Haberland
2026-08-01 11:38 ` sashiko-bot
2026-08-01 11:10 ` Stefan Haberland [this message]
2026-08-01 11:45 ` [PATCH v6 16/18] s390/dasd: Report ESE capability and format mode at device online sashiko-bot
2026-08-01 11:10 ` [PATCH v6 17/18] s390/dasd: Re-enable discard support for ESE volumes Stefan Haberland
2026-08-01 11:45 ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 18/18] s390/dasd: Read cached unit address and LSS in the CCW build path Stefan Haberland
2026-08-01 11:49 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260801111008.3391031-17-sth@linux.ibm.com \
--to=sth@linux.ibm.com \
--cc=edward6@linux.ibm.com \
--cc=hoeppner@linux.ibm.com \
--cc=linux-s390@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox