Linux s390 Architecture development
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Stefan Haberland" <sth@linux.ibm.com>
Cc: "Vasily Gorbik" <gor@linux.ibm.com>,
	"Alexander Gordeev" <agordeev@linux.ibm.com>,
	linux-s390@vger.kernel.org, "Heiko Carstens" <hca@linux.ibm.com>
Subject: Re: [PATCH v6 08/18] s390/dasd: Add range-based format-track collision detection
Date: Sat, 01 Aug 2026 11:36:34 +0000	[thread overview]
Message-ID: <20260801113634.959421F00AC4@smtp.kernel.org> (raw)
In-Reply-To: <20260801111008.3391031-9-sth@linux.ibm.com>

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [Critical] Premature removal of the `trkcount` check introduces a double-format vulnerability that breaks bisection and causes data corruption.
- [Low] Unsynchronized modification of `format->cqr` outside of `format_lock` causes a data race.
--

--- Patch [8]: [PATCH v6 08/18] s390/dasd: Add range-based format-track collision detection ---
Note: The format of this review has been altered to a free-form summary to
comply with system recitation restrictions. Standard diff quoting has been
omitted.

commit a04e5d02e092ddaf9f460306f01f82bfd4b72118
Author: Stefan Haberland <sth@linux.ibm.com>
s390/dasd: Add range-based format-track collision detection

This commit replaces the single format_entry with an array to support multiple
in-flight format requests, and modifies conflict detection to use range
overlaps. It also removes the trkcount snapshot in dasd_start_IO().

[Severity: Critical]
In dasd_start_IO(), the snapshot of trkcount was removed, which previously
protected against delayed-interrupt races. In test_and_set_format_track(),
this was replaced with a scan of format_list.

However, because the new collision flag mechanism is dormant in this patch,
does this premature removal introduce a double-format vulnerability that breaks
bisection?

If CPU 1 and CPU 2 both issue a WRITE to the same unallocated track, the
device fails both, generating two unformatted track interrupts. If CPU 1
processes its interrupt, formats the track, and retries its WRITE, it will
remove the track from format_list. If CPU 2 is delayed and processes its
interrupt after CPU 1s format completes, it calls test_and_set_format_track().

Since the track is no longer in format_list and the new collision mechanism is
inactive, CPU 2 will not detect the collision and will issue a second format,
potentially erasing CPU 1s freshly written data.

[Severity: Low]
In dasd_eckd_ese_format(), there is an assignment format->cqr = fcqr which
occurs outside of the format_lock.

Concurrently, in test_and_set_format_track(), a reader checks
device->format_entry[i].cqr while holding the lock.

Does this unsynchronized modification cause a data race on a shared pointer?
While it might not cause a crash since the pointer transitions from one valid
non-NULL pointer to another, it appears to violate kernel concurrency rules.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260801111008.3391031-1-sth@linux.ibm.com?part=8

  reply	other threads:[~2026-08-01 11:36 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-01 11:09 [PATCH v6 00/18] s390/dasd: ESE thin-provisioning performance improvements Stefan Haberland
2026-08-01 11:09 ` [PATCH v6 01/18] s390/dasd: Do not complete a failed ESE read as successful Stefan Haberland
2026-08-01 11:27   ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 02/18] s390/dasd: Propagate partial completion length across ERP recovery Stefan Haberland
2026-08-01 11:21   ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 03/18] s390/dasd: Guard sysfs discipline callbacks against unallocated private data Stefan Haberland
2026-08-01 11:40   ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 04/18] s390/dasd: Optimize max blocks per request for track alignment Stefan Haberland
2026-08-01 11:20   ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 05/18] s390/dasd: Use GFP_KERNEL in dasd_alloc_device() Stefan Haberland
2026-08-01 11:21   ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 06/18] s390/dasd: Add defines for the Extended Address Volume track address Stefan Haberland
2026-08-01 11:13   ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 07/18] s390/dasd: Add infrastructure for ESE full-track write Stefan Haberland
2026-08-01 11:32   ` sashiko-bot
2026-08-01 11:09 ` [PATCH v6 08/18] s390/dasd: Add range-based format-track collision detection Stefan Haberland
2026-08-01 11:36   ` sashiko-bot [this message]
2026-08-01 11:09 ` [PATCH v6 09/18] s390/dasd: Extend prepare_itcw() to support WRITE_FULL_TRACK Stefan Haberland
2026-08-01 11:37   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 10/18] s390/dasd: Add dasd_eckd_build_cp_tpm_writefulltrack() Stefan Haberland
2026-08-01 11:29   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 11/18] s390/dasd: Use WRITE_FULL_TRACK in ESE format handler Stefan Haberland
2026-08-01 11:39   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 12/18] s390/dasd: Add full_track_bias to control fulltrack write mode Stefan Haberland
2026-08-01 11:27   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 13/18] s390/dasd: Derive adaptive ESE fulltrack heuristic from ft_bias Stefan Haberland
2026-08-01 11:46   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 14/18] s390/dasd: Stamp a format label into newly formatted volumes Stefan Haberland
2026-08-01 11:33   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 15/18] s390/dasd: Detect ESE volumes from the on-disk format label Stefan Haberland
2026-08-01 11:38   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 16/18] s390/dasd: Report ESE capability and format mode at device online Stefan Haberland
2026-08-01 11:45   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 17/18] s390/dasd: Re-enable discard support for ESE volumes Stefan Haberland
2026-08-01 11:45   ` sashiko-bot
2026-08-01 11:10 ` [PATCH v6 18/18] s390/dasd: Read cached unit address and LSS in the CCW build path Stefan Haberland
2026-08-01 11:49   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260801113634.959421F00AC4@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=agordeev@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=linux-s390@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=sth@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox