From: Pierre Morel <pmorel@linux.ibm.com>
To: Matthew Rosato <mjrosato@linux.ibm.com>, linux-s390@vger.kernel.org
Cc: alex.williamson@redhat.com, cohuck@redhat.com,
schnelle@linux.ibm.com, farman@linux.ibm.com,
borntraeger@linux.ibm.com, hca@linux.ibm.com, gor@linux.ibm.com,
gerald.schaefer@linux.ibm.com, agordeev@linux.ibm.com,
svens@linux.ibm.com, frankja@linux.ibm.com, david@redhat.com,
imbrenda@linux.ibm.com, vneethv@linux.ibm.com,
oberpar@linux.ibm.com, freude@linux.ibm.com, thuth@redhat.com,
pasic@linux.ibm.com, pbonzini@redhat.com, corbet@lwn.net,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: Re: [PATCH v5 12/21] KVM: s390: pci: enable host forwarding of Adapter Event Notifications
Date: Tue, 19 Apr 2022 11:21:11 +0200 [thread overview]
Message-ID: <496acdc3-3473-bfc4-1f16-8853f364c48c@linux.ibm.com> (raw)
In-Reply-To: <20220404174349.58530-13-mjrosato@linux.ibm.com>
On 4/4/22 19:43, Matthew Rosato wrote:
> In cases where interrupts are not forwarded to the guest via firmware,
> KVM is responsible for ensuring delivery. When an interrupt presents
> with the forwarding bit, we must process the forwarding tables until
> all interrupts are delivered.
>
> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
> ---
> arch/s390/include/asm/kvm_host.h | 1 +
> arch/s390/include/asm/tpi.h | 13 ++++++
> arch/s390/kvm/interrupt.c | 77 +++++++++++++++++++++++++++++++-
> arch/s390/kvm/kvm-s390.c | 3 +-
> arch/s390/kvm/pci.h | 10 +++++
> 5 files changed, 102 insertions(+), 2 deletions(-)
>
> diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
> index 766028d54a3e..c1518a505060 100644
> --- a/arch/s390/include/asm/kvm_host.h
> +++ b/arch/s390/include/asm/kvm_host.h
> @@ -759,6 +759,7 @@ struct kvm_vm_stat {
> u64 inject_pfault_done;
> u64 inject_service_signal;
> u64 inject_virtio;
> + u64 aen_forward;
> };
>
> struct kvm_arch_memory_slot {
> diff --git a/arch/s390/include/asm/tpi.h b/arch/s390/include/asm/tpi.h
> index 1ac538b8cbf5..f76e5fdff23a 100644
> --- a/arch/s390/include/asm/tpi.h
> +++ b/arch/s390/include/asm/tpi.h
> @@ -19,6 +19,19 @@ struct tpi_info {
> u32 :12;
> } __packed __aligned(4);
>
> +/* I/O-Interruption Code as stored by TPI for an Adapter I/O */
> +struct tpi_adapter_info {
> + u32 aism:8;
> + u32 :22;
> + u32 error:1;
> + u32 forward:1;
> + u32 reserved;
> + u32 adapter_IO:1;
> + u32 directed_irq:1;
> + u32 isc:3;
> + u32 :27;
> +} __packed __aligned(4);
> +
> #endif /* __ASSEMBLY__ */
>
> #endif /* _ASM_S390_TPI_H */
> diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
> index 57a27dfc85ea..bea0cc59eeba 100644
> --- a/arch/s390/kvm/interrupt.c
> +++ b/arch/s390/kvm/interrupt.c
> @@ -3313,11 +3313,86 @@ int kvm_s390_gisc_unregister(struct kvm *kvm, u32 gisc)
> }
> EXPORT_SYMBOL_GPL(kvm_s390_gisc_unregister);
>
> +static void aen_host_forward(unsigned long si)
> +{
> + struct kvm_s390_gisa_interrupt *gi;
> + struct zpci_gaite *gaite;
> + struct kvm *kvm;
> +
> + gaite = (struct zpci_gaite *)aift->gait +
> + (si * sizeof(struct zpci_gaite));
> + if (gaite->count == 0)
> + return;
> + if (gaite->aisb != 0)
> + set_bit_inv(gaite->aisbo, (unsigned long *)gaite->aisb);
> +
> + kvm = kvm_s390_pci_si_to_kvm(aift, si);
> + if (!kvm)
> + return;
> + gi = &kvm->arch.gisa_int;
> +
> + if (!(gi->origin->g1.simm & AIS_MODE_MASK(gaite->gisc)) ||
> + !(gi->origin->g1.nimm & AIS_MODE_MASK(gaite->gisc))) {
> + gisa_set_ipm_gisc(gi->origin, gaite->gisc);
> + if (hrtimer_active(&gi->timer))
> + hrtimer_cancel(&gi->timer);
> + hrtimer_start(&gi->timer, 0, HRTIMER_MODE_REL);
> + kvm->stat.aen_forward++;
> + }
> +}
> +
> +static void aen_process_gait(u8 isc)
> +{
> + bool found = false, first = true;
> + union zpci_sic_iib iib = {{0}};
> + unsigned long si, flags;
> +
> + spin_lock_irqsave(&aift->gait_lock, flags);
> +
> + if (!aift->gait) {
> + spin_unlock_irqrestore(&aift->gait_lock, flags);
> + return;
> + }
> +
> + for (si = 0;;) {
> + /* Scan adapter summary indicator bit vector */
> + si = airq_iv_scan(aift->sbv, si, airq_iv_end(aift->sbv));
> + if (si == -1UL) {
> + if (first || found) {
> + /* Re-enable interrupts. */
> + zpci_set_irq_ctrl(SIC_IRQ_MODE_SINGLE, isc,
> + &iib);
> + first = found = false;
> + } else {
> + /* Interrupts on and all bits processed */
> + break;
> + }
> + found = false;
> + si = 0;
> + /* Scan again after re-enabling interrupts */
> + continue;
> + }
> + found = true;
> + aen_host_forward(si);
> + }
> +
> + spin_unlock_irqrestore(&aift->gait_lock, flags);
> +}
> +
> static void gib_alert_irq_handler(struct airq_struct *airq,
> struct tpi_info *tpi_info)
> {
> + struct tpi_adapter_info *info = (struct tpi_adapter_info *)tpi_info;
> +
> inc_irq_stat(IRQIO_GAL);
> - process_gib_alert_list();
> +
> + if (IS_ENABLED(CONFIG_VFIO_PCI) && (info->forward || info->error)) {
> + aen_process_gait(info->isc);
> + if (info->aism != 0)
> + process_gib_alert_list();
> + } else {
> + process_gib_alert_list();
> + }
> }
>
> static struct airq_struct gib_alert_irq = {
> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
> index 9db6f8080f71..a9eb8b75af93 100644
> --- a/arch/s390/kvm/kvm-s390.c
> +++ b/arch/s390/kvm/kvm-s390.c
> @@ -64,7 +64,8 @@ const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
> STATS_DESC_COUNTER(VM, inject_float_mchk),
> STATS_DESC_COUNTER(VM, inject_pfault_done),
> STATS_DESC_COUNTER(VM, inject_service_signal),
> - STATS_DESC_COUNTER(VM, inject_virtio)
> + STATS_DESC_COUNTER(VM, inject_virtio),
> + STATS_DESC_COUNTER(VM, aen_forward)
> };
>
> const struct kvm_stats_header kvm_vm_stats_header = {
> diff --git a/arch/s390/kvm/pci.h b/arch/s390/kvm/pci.h
> index a6a62db792b6..d4997e2236ef 100644
> --- a/arch/s390/kvm/pci.h
> +++ b/arch/s390/kvm/pci.h
> @@ -13,6 +13,7 @@
> #include <linux/kvm_host.h>
> #include <linux/pci.h>
> #include <linux/mutex.h>
> +#include <linux/kvm_host.h>
> #include <asm/airq.h>
> #include <asm/cpu.h>
>
> @@ -40,6 +41,15 @@ struct zpci_aift {
>
> extern struct zpci_aift *aift;
>
> +static inline struct kvm *kvm_s390_pci_si_to_kvm(struct zpci_aift *aift,
> + unsigned long si)
> +{
> + if (!IS_ENABLED(CONFIG_VFIO_PCI) || aift->kzdev == 0 ||
> + aift->kzdev[si] == 0)
> + return 0;
> + return aift->kzdev[si]->kvm;
> +};
> +
> int kvm_s390_pci_aen_init(u8 nisc);
> void kvm_s390_pci_aen_exit(void);
>
>
--
Pierre Morel
IBM Lab Boeblingen
next prev parent reply other threads:[~2022-04-19 9:18 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-04 17:43 [PATCH v5 00/21] KVM: s390: enable zPCI for interpretive execution Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 01/21] s390/sclp: detect the zPCI load/store interpretation facility Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 02/21] s390/sclp: detect the AISII facility Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 03/21] s390/sclp: detect the AENI facility Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 04/21] s390/sclp: detect the AISI facility Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 05/21] s390/airq: pass more TPI info to airq handlers Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 06/21] s390/airq: allow for airq structure that uses an input vector Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 07/21] s390/pci: externalize the SIC operation controls and routine Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 08/21] s390/pci: stash associated GISA designation Matthew Rosato
2022-04-05 8:03 ` Niklas Schnelle
2022-04-12 16:18 ` Christian Borntraeger
2022-04-19 7:54 ` Pierre Morel
2022-04-04 17:43 ` [PATCH v5 09/21] s390/pci: stash dtsm and maxstbl Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 10/21] KVM: s390: pci: add basic kvm_zdev structure Matthew Rosato
2022-04-05 8:20 ` Niklas Schnelle
2022-04-05 13:51 ` Matthew Rosato
2022-04-12 16:20 ` Christian Borntraeger
2022-04-19 7:55 ` Pierre Morel
2022-04-04 17:43 ` [PATCH v5 11/21] KVM: s390: pci: do initial setup for AEN interpretation Matthew Rosato
2022-04-14 7:20 ` Christian Borntraeger
2022-04-14 13:00 ` Matthew Rosato
2022-04-19 8:16 ` Pierre Morel
2022-04-20 13:43 ` Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 12/21] KVM: s390: pci: enable host forwarding of Adapter Event Notifications Matthew Rosato
2022-04-19 9:21 ` Pierre Morel [this message]
2022-04-04 17:43 ` [PATCH v5 13/21] KVM: s390: mechanism to enable guest zPCI Interpretation Matthew Rosato
2022-04-19 9:30 ` Pierre Morel
2022-04-04 17:43 ` [PATCH v5 14/21] KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding Matthew Rosato
2022-04-05 13:39 ` Niklas Schnelle
2022-04-05 13:48 ` Matthew Rosato
2022-04-05 15:06 ` Pierre Morel
2022-04-08 12:48 ` Jason Gunthorpe
2022-04-11 12:19 ` Heiko Carstens
2022-04-04 17:43 ` [PATCH v5 15/21] KVM: s390: pci: add routines to start/stop interpretive execution Matthew Rosato
2022-04-08 12:47 ` Jason Gunthorpe
2022-04-12 13:14 ` Matthew Rosato
2022-04-12 13:29 ` Jason Gunthorpe
2022-04-04 17:43 ` [PATCH v5 16/21] KVM: vfio: add s390x hook to register KVM guest designation Matthew Rosato
2022-04-08 12:45 ` Jason Gunthorpe
2022-04-12 13:39 ` Matthew Rosato
2022-04-12 13:55 ` Jason Gunthorpe
2022-04-12 14:32 ` Matthew Rosato
2022-04-04 17:43 ` [PATCH v5 17/21] vfio-pci/zdev: add function handle to clp base capability Matthew Rosato
2022-04-19 9:40 ` Pierre Morel
2022-04-04 17:43 ` [PATCH v5 18/21] vfio-pci/zdev: different maxstbl for interpreted devices Matthew Rosato
2022-04-19 9:41 ` Pierre Morel
2022-04-04 17:43 ` [PATCH v5 19/21] KVM: s390: add KVM_S390_ZPCI_OP to manage guest zPCI devices Matthew Rosato
2022-04-19 10:07 ` Pierre Morel
2022-04-20 14:10 ` Matthew Rosato
2022-04-20 18:18 ` Pierre Morel
2022-04-04 17:43 ` [PATCH v5 20/21] KVM: s390: introduce CPU feature for zPCI Interpretation Matthew Rosato
2022-04-19 10:08 ` Pierre Morel
2022-04-04 17:43 ` [PATCH v5 21/21] MAINTAINERS: additional files related kvm s390 pci passthrough Matthew Rosato
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=496acdc3-3473-bfc4-1f16-8853f364c48c@linux.ibm.com \
--to=pmorel@linux.ibm.com \
--cc=agordeev@linux.ibm.com \
--cc=alex.williamson@redhat.com \
--cc=borntraeger@linux.ibm.com \
--cc=cohuck@redhat.com \
--cc=corbet@lwn.net \
--cc=david@redhat.com \
--cc=farman@linux.ibm.com \
--cc=frankja@linux.ibm.com \
--cc=freude@linux.ibm.com \
--cc=gerald.schaefer@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mjrosato@linux.ibm.com \
--cc=oberpar@linux.ibm.com \
--cc=pasic@linux.ibm.com \
--cc=pbonzini@redhat.com \
--cc=schnelle@linux.ibm.com \
--cc=svens@linux.ibm.com \
--cc=thuth@redhat.com \
--cc=vneethv@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox