Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Kukjin Kim <kgene.kim@samsung.com>
To: 'Mark Brown' <broonie@opensource.wolfsonmicro.com>,
	'Ben Dooks' <ben-linux@fluff.org>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	patches@opensource.wolfsonmicro.com
Subject: RE: [PATCH 2/3] ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methods
Date: Wed, 01 Dec 2010 20:30:38 +0900	[thread overview]
Message-ID: <003001cb914b$2fa10e90$8ee32bb0$%kim@samsung.com> (raw)
In-Reply-To: <1290698309-7691-2-git-send-email-broonie@opensource.wolfsonmicro.com>

Mark Brown wrote:
> 
> Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
> rather than an irq number. Conver S3C64xx irq-eint to use this with a
> simple textual substitution.
> 
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
>  arch/arm/mach-s3c64xx/irq-eint.c |   32 ++++++++++++++++----------------
>  1 files changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-
> eint.c
> index 1a1aa5d..169ee29 100644
> --- a/arch/arm/mach-s3c64xx/irq-eint.c
> +++ b/arch/arm/mach-s3c64xx/irq-eint.c
> @@ -32,39 +32,39 @@
>  #define eint_offset(irq)	((irq) - IRQ_EINT(0))
>  #define eint_irq_to_bit(irq)	(1 << eint_offset(irq))
> 
> -static inline void s3c_irq_eint_mask(unsigned int irq)
> +static inline void s3c_irq_eint_mask(struct irq_data *data)
>  {
>  	u32 mask;
> 
>  	mask = __raw_readl(S3C64XX_EINT0MASK);
> -	mask |= eint_irq_to_bit(irq);
> +	mask |= eint_irq_to_bit(data->irq);
>  	__raw_writel(mask, S3C64XX_EINT0MASK);
>  }
> 
> -static void s3c_irq_eint_unmask(unsigned int irq)
> +static void s3c_irq_eint_unmask(struct irq_data *data)
>  {
>  	u32 mask;
> 
>  	mask = __raw_readl(S3C64XX_EINT0MASK);
> -	mask &= ~eint_irq_to_bit(irq);
> +	mask &= ~eint_irq_to_bit(data->irq);
>  	__raw_writel(mask, S3C64XX_EINT0MASK);
>  }
> 
> -static inline void s3c_irq_eint_ack(unsigned int irq)
> +static inline void s3c_irq_eint_ack(struct irq_data *data)
>  {
> -	__raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND);
> +	__raw_writel(eint_irq_to_bit(data->irq), S3C64XX_EINT0PEND);
>  }
> 
> -static void s3c_irq_eint_maskack(unsigned int irq)
> +static void s3c_irq_eint_maskack(struct irq_data *data)
>  {
>  	/* compiler should in-line these */
> -	s3c_irq_eint_mask(irq);
> -	s3c_irq_eint_ack(irq);
> +	s3c_irq_eint_mask(data);
> +	s3c_irq_eint_ack(data);
>  }
> 
> -static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
> +static int s3c_irq_eint_set_type(struct irq_data *data, unsigned int
type)
>  {
> -	int offs = eint_offset(irq);
> +	int offs = eint_offset(data->irq);
>  	int pin, pin_val;
>  	int shift;
>  	u32 ctrl, mask;
> @@ -140,11 +140,11 @@ static int s3c_irq_eint_set_type(unsigned int irq,
> unsigned int type)
> 
>  static struct irq_chip s3c_irq_eint = {
>  	.name		= "s3c-eint",
> -	.mask		= s3c_irq_eint_mask,
> -	.unmask		= s3c_irq_eint_unmask,
> -	.mask_ack	= s3c_irq_eint_maskack,
> -	.ack		= s3c_irq_eint_ack,
> -	.set_type	= s3c_irq_eint_set_type,
> +	.irq_mask	= s3c_irq_eint_mask,
> +	.irq_unmask	= s3c_irq_eint_unmask,
> +	.irq_mask_ack	= s3c_irq_eint_maskack,
> +	.irq_ack	= s3c_irq_eint_ack,
> +	.irq_set_type	= s3c_irq_eint_set_type,
>  	.irq_set_wake	= s3c_irqext_wake,
>  };
> 
> --

Ok...will apply.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

  reply	other threads:[~2010-12-01 11:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-25 15:18 [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods Mark Brown
2010-11-25 15:18 ` [PATCH 2/3] ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methods Mark Brown
2010-12-01 11:30   ` Kukjin Kim [this message]
2010-11-25 15:18 ` [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs Mark Brown
2010-12-01 11:44   ` Kukjin Kim
2010-12-01 11:55     ` Mark Brown
2010-12-01 12:11       ` Kukjin Kim
2010-12-08  0:36       ` Ben Dooks
2010-12-01 10:19 ` [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods Lennert Buytenhek
2010-12-01 11:08   ` Mark Brown
2010-12-01 11:45     ` Lennert Buytenhek
2010-12-01 11:47       ` Mark Brown
2010-12-01 11:24 ` Kukjin Kim
2010-12-01 11:28 ` Kukjin Kim
2010-12-01 11:33   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='003001cb914b$2fa10e90$8ee32bb0$%kim@samsung.com' \
    --to=kgene.kim@samsung.com \
    --cc=ben-linux@fluff.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox