Re: [PATCH RESEND 0/4] ARM: EXYNOS: Add s3c-hsotg support for Exynos4210 and S5PV210 boards

[Tushar Behera <tushar.behera@linaro.org>]

On 05/10/2012 06:46 PM, Lukasz Majewski wrote:
> This patch series adds S3C-HSOTG UDC support for Exynos4210 and S5PV210 based targets; namely
>  Universal_C210, Nuri and GONI.
> 
> Tested HW:
> - Exynos4210 NURI target rev.1
> - Exynos4210 Universal_C210 target rev.0
> - S5PV210 GONI target
> 
> Dependencies:
> - usb:hsotg:samsung USB S3C-HSOTG driver fixes and code cleanup
>   patches, which have been already pulled to usb for-next branch.
> 
> http://permalink.gmane.org/gmane.linux.usb.general/62101
> 
> Those patches are enabling this UDC driver on GONI, NURI and Universal_C210 targets
> 
> Joonyoung Shim (1):
>   ARM: EXYNOS: Add s3c-hsotg device support for NURI board
> 
> Lukasz Majewski (3):
>   ARM: EXYNOS: Add usb otg phy control for EXYNOS4210
>   ARM: EXYNOS: Add s3c-hsotg device support for GONI board
>   ARM: EXYNOS: Add s3c-hsotg device support for Universal C210 board
> 
>  arch/arm/mach-exynos/Kconfig                 |    3 +
>  arch/arm/mach-exynos/include/mach/irqs.h     |    1 +
>  arch/arm/mach-exynos/include/mach/map.h      |    4 +
>  arch/arm/mach-exynos/include/mach/regs-pmu.h |    3 +
>  arch/arm/mach-exynos/mach-nuri.c             |    9 ++-
>  arch/arm/mach-exynos/mach-universal_c210.c   |   10 +++
>  arch/arm/mach-exynos/setup-usb-phy.c         |   95 +++++++++++++++++++-------
>  arch/arm/mach-s5pv210/Kconfig                |    1 +
>  arch/arm/mach-s5pv210/mach-goni.c            |    5 ++
>  9 files changed, 105 insertions(+), 26 deletions(-)
> 
Kukjin,

Are you planning to queue this patchset for 3.5? If so, I have one patch
for enabling support on Origen board, which I would like to add on top
of these patches.

Please let me know about your plan.

-- 
Tushar Behera