* Fw: [BUG] 2.6.17-rc1: SCSI kobject_add problems
@ 2006-04-08 0:14 Andrew Morton
2006-04-24 15:07 ` Michael Reed
0 siblings, 1 reply; 4+ messages in thread
From: Andrew Morton @ 2006-04-08 0:14 UTC (permalink / raw)
To: Andrew Vasquez; +Cc: linux-scsi, rct
Begin forwarded message:
Date: Fri, 7 Apr 2006 13:31:05 -0500 (CDT)
From: rct@gherkin.frus.com (Bob Tracy)
To: linux-kernel@vger.kernel.org
Subject: [BUG] 2.6.17-rc1: SCSI kobject_add problems
System is a DEC Alpha 433au with two SCSI disks. SCSI controller is a
QLA1040 supported by the qla1280 driver. Runs 2.6.16 fine. Tried
booting 2.6.17-rc1 and got
kobject_add failed for 0:0: with -EEXIST, don't try to register things with the same name in the same directory
and a fairly long trace output when the system attempted to add sdb.
Not surprisingly, sdb was inaccessible.
Normally (for 2.6.16 anyway), the following relationship exists:
sd 0:0:0:0 sda
sd 0:0:1:0 sdb
More information *might* be available if needed, but will have to be
transcribed by hand. My /usr partition is on sdb, so I don't get very
far with 2.6.17-rc1 on Alpha :-). The problem is probably specific to
the qla1280 or the Alpha, as I have a x86 Adaptec SCSI-based system
with multiple spindles that works fine with 2.6.17-rc1.
--
-----------------------------------------------------------------------
Bob Tracy WTO + WIPO = DMCA? http://www.anti-dmca.org
rct@frus.com
-----------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Fw: [BUG] 2.6.17-rc1: SCSI kobject_add problems
2006-04-08 0:14 Fw: [BUG] 2.6.17-rc1: SCSI kobject_add problems Andrew Morton
@ 2006-04-24 15:07 ` Michael Reed
2006-04-24 18:55 ` Bob Tracy
0 siblings, 1 reply; 4+ messages in thread
From: Michael Reed @ 2006-04-24 15:07 UTC (permalink / raw)
To: Andrew Morton; +Cc: Andrew Vasquez, linux-scsi, rct
See my post on 4/21:
"2.6.17-rc2: kobject_add failed"
http://marc.theaimsgroup.com/?l=linux-scsi&m=114563629810793&w=2
Perhaps this is related?
http://marc.theaimsgroup.com/?t=114443491400001&r=1&w=2
Mike
Andrew Morton wrote:
>
> Begin forwarded message:
>
> Date: Fri, 7 Apr 2006 13:31:05 -0500 (CDT)
> From: rct@gherkin.frus.com (Bob Tracy)
> To: linux-kernel@vger.kernel.org
> Subject: [BUG] 2.6.17-rc1: SCSI kobject_add problems
>
>
> System is a DEC Alpha 433au with two SCSI disks. SCSI controller is a
> QLA1040 supported by the qla1280 driver. Runs 2.6.16 fine. Tried
> booting 2.6.17-rc1 and got
>
> kobject_add failed for 0:0: with -EEXIST, don't try to register things with the same name in the same directory
>
> and a fairly long trace output when the system attempted to add sdb.
> Not surprisingly, sdb was inaccessible.
>
> Normally (for 2.6.16 anyway), the following relationship exists:
>
> sd 0:0:0:0 sda
> sd 0:0:1:0 sdb
>
> More information *might* be available if needed, but will have to be
> transcribed by hand. My /usr partition is on sdb, so I don't get very
> far with 2.6.17-rc1 on Alpha :-). The problem is probably specific to
> the qla1280 or the Alpha, as I have a x86 Adaptec SCSI-based system
> with multiple spindles that works fine with 2.6.17-rc1.
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-04-24 20:16 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-04-08 0:14 Fw: [BUG] 2.6.17-rc1: SCSI kobject_add problems Andrew Morton
2006-04-24 15:07 ` Michael Reed
2006-04-24 18:55 ` Bob Tracy
2006-04-24 20:15 ` Andrew Morton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox