* [PATCHv2 00/22] Nobody loves the advansys driver
@ 2015-04-24 8:32 Hannes Reinecke
2015-04-24 8:32 ` [PATCH 01/22] advansys: use host_reset Hannes Reinecke
` (21 more replies)
0 siblings, 22 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Hi all,
it has been bugged me for ages that the advansys driver always
reported a compilation warning about not having been converted
to the DMA-API.
And even aggressive waiting hasn't made this warning go away.
So here's a patchset to update the advansys driver to current
standards and use the DMA-API.
Tested on ABP940-U2W and ABP-960-U (Thanks, Doug!)
As usual, reviews and comments are welcome.
Changes to the original version:
- Fixed issue noted by Ondrey Zary
- Tested narrow-scsi support
- Fixed sg list corruption on wide boards
- Even more cleanup
Hannes Reinecke (22):
advansys: use host_reset
advansys: use shared host tag map for command lookup
advansys: use DMA-API for mapping sense buffer
advansys: Use DMA-API for carrier buffer
advansys: Use DMA-API for mapping request blocks
advansys: Use dma_pool for sg elements
advansys: use 'bool' instead of 'int'
advansys: use standard data types
advansys: Remove 'TRUE' and 'FALSE' definitions
advansys: remove 'ERR' definition
advansys: Make AscIsrChipHalted() a void function
advansys: cleanup function return codes
advansys: scsi_q1->data_addr is little endian
advansys: Remove ASC_SCSI_REQ_Q
advansys: Remove CC_VERY_LONG_SG_LIST
advansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX'
advansys: Remove 'a_flag'
advansys: Remove obsolete virtual memory mapping comment
advansys: Remove comment around cmd_per_lun
advansys: Check for DMA mapping errors
advansys: use spin_lock_irqsave() in interrupt handler
advansys: Update to version 3.5 and remove compilation warning
MAINTAINERS | 1 +
drivers/scsi/Kconfig | 2 +-
drivers/scsi/advansys.c | 1457 ++++++++++++++++-------------------------------
3 files changed, 508 insertions(+), 952 deletions(-)
--
1.8.5.2
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 01/22] advansys: use host_reset
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 02/22] advansys: use shared host tag map for command lookup Hannes Reinecke
` (20 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
The advansys_reset() function is actually a host reset, not a
bus reset. And there is no need to have a 'last_reset'
value; the same value exists in struct Scsi_Host.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 27 +++++++++++----------------
1 file changed, 11 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index ae95e34..e936f48 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2366,7 +2366,6 @@ struct asc_board {
ADVEEP_38C0800_CONFIG adv_38C0800_eep; /* 38C0800 EEPROM config. */
ADVEEP_38C1600_CONFIG adv_38C1600_eep; /* 38C1600 EEPROM config. */
} eep_config;
- ulong last_reset; /* Saved last reset time */
/* /proc/scsi/advansys/[0...] */
#ifdef ADVANSYS_STATS
struct asc_stats asc_stats; /* Board statistics */
@@ -3350,7 +3349,7 @@ static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost)
seq_printf(m,
" flags 0x%x, last_reset 0x%lx, jiffies 0x%lx, asc_n_io_port 0x%x\n",
- boardp->flags, boardp->last_reset, jiffies,
+ boardp->flags, shost->last_reset, jiffies,
boardp->asc_n_io_port);
seq_printf(m, " io_port 0x%lx\n", shost->io_port);
@@ -7453,7 +7452,7 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
/*
* advansys_reset()
*
- * Reset the bus associated with the command 'scp'.
+ * Reset the host associated with the command 'scp'.
*
* This function runs its own thread. Interrupts must be blocked but
* sleeping is allowed and no locking other than for host structures is
@@ -7471,7 +7470,7 @@ static int advansys_reset(struct scsi_cmnd *scp)
ASC_STATS(shost, reset);
- scmd_printk(KERN_INFO, scp, "SCSI bus reset started...\n");
+ scmd_printk(KERN_INFO, scp, "SCSI host reset started...\n");
if (ASC_NARROW_BOARD(boardp)) {
ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var;
@@ -7482,20 +7481,19 @@ static int advansys_reset(struct scsi_cmnd *scp)
/* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */
if (asc_dvc->err_code || !asc_dvc->overrun_dma) {
- scmd_printk(KERN_INFO, scp, "SCSI bus reset error: "
+ scmd_printk(KERN_INFO, scp, "SCSI host reset error: "
"0x%x, status: 0x%x\n", asc_dvc->err_code,
status);
ret = FAILED;
} else if (status) {
- scmd_printk(KERN_INFO, scp, "SCSI bus reset warning: "
+ scmd_printk(KERN_INFO, scp, "SCSI host reset warning: "
"0x%x\n", status);
} else {
- scmd_printk(KERN_INFO, scp, "SCSI bus reset "
+ scmd_printk(KERN_INFO, scp, "SCSI host reset "
"successful\n");
}
ASC_DBG(1, "after AscInitAsc1000Driver()\n");
- spin_lock_irqsave(shost->host_lock, flags);
} else {
/*
* If the suggest reset bus flags are set, then reset the bus.
@@ -7504,28 +7502,25 @@ static int advansys_reset(struct scsi_cmnd *scp)
ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var;
/*
- * Reset the target's SCSI bus.
+ * Reset the chip and SCSI bus.
*/
ASC_DBG(1, "before AdvResetChipAndSB()\n");
switch (AdvResetChipAndSB(adv_dvc)) {
case ASC_TRUE:
- scmd_printk(KERN_INFO, scp, "SCSI bus reset "
+ scmd_printk(KERN_INFO, scp, "SCSI host reset "
"successful\n");
break;
case ASC_FALSE:
default:
- scmd_printk(KERN_INFO, scp, "SCSI bus reset error\n");
+ scmd_printk(KERN_INFO, scp, "SCSI host reset error\n");
ret = FAILED;
break;
}
spin_lock_irqsave(shost->host_lock, flags);
AdvISR(adv_dvc);
+ spin_unlock_irqrestore(shost->host_lock, flags);
}
- /* Save the time of the most recently completed reset. */
- boardp->last_reset = jiffies;
- spin_unlock_irqrestore(shost->host_lock, flags);
-
ASC_DBG(1, "ret %d\n", ret);
return ret;
@@ -11232,7 +11227,7 @@ static struct scsi_host_template advansys_template = {
.name = DRV_NAME,
.info = advansys_info,
.queuecommand = advansys_queuecommand,
- .eh_bus_reset_handler = advansys_reset,
+ .eh_host_reset_handler = advansys_reset,
.bios_param = advansys_biosparam,
.slave_configure = advansys_slave_configure,
/*
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 02/22] advansys: use shared host tag map for command lookup
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
2015-04-24 8:32 ` [PATCH 01/22] advansys: use host_reset Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 03/22] advansys: use DMA-API for mapping sense buffer Hannes Reinecke
` (19 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Convert to use a shared host tag map for command lookup. This
saves us having an internal structure and avoid the command
pointer abuse.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 225 +++++++++++++++++-------------------------------
1 file changed, 79 insertions(+), 146 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index e936f48..b595e8b 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -315,7 +315,7 @@ typedef struct asc_scsiq_1 {
} ASC_SCSIQ_1;
typedef struct asc_scsiq_2 {
- ASC_VADDR srb_ptr;
+ u32 srb_tag;
uchar target_ix;
uchar flag;
uchar cdb_len;
@@ -592,8 +592,6 @@ typedef struct asc_dvc_var {
uchar min_sdtr_index;
uchar max_sdtr_index;
struct asc_board *drv_ptr;
- int ptr_map_count;
- void **ptr_map;
ASC_DCNT uc_break;
} ASC_DVC_VAR;
@@ -1866,7 +1864,7 @@ typedef struct adv_scsi_req_q {
* End of microcode structure - 60 bytes. The rest of the structure
* is used by the Adv Library and ignored by the microcode.
*/
- ADV_VADDR srb_ptr;
+ u32 srb_tag;
ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */
char *vdata_addr; /* Data buffer virtual address. */
uchar a_flag;
@@ -1877,9 +1875,9 @@ typedef struct adv_scsi_req_q {
* The following two structures are used to process Wide Board requests.
*
* The ADV_SCSI_REQ_Q structure in adv_req_t is passed to the Adv Library
- * and microcode with the ADV_SCSI_REQ_Q field 'srb_ptr' pointing to the
- * adv_req_t. The adv_req_t structure 'cmndp' field in turn points to the
- * Mid-Level SCSI request structure.
+ * and microcode with the ADV_SCSI_REQ_Q field 'srb_tag' set to the
+ * SCSI request tag. The adv_req_t structure 'cmndp' field in turn points
+ * to the Mid-Level SCSI request structure.
*
* Zero or more ADV_SG_BLOCK are used with each ADV_SCSI_REQ_Q. Each
* ADV_SG_BLOCK structure holds 15 scatter-gather elements. Under Linux
@@ -1942,7 +1940,6 @@ typedef struct adv_dvc_var {
ADV_CARR_T *icq_sp; /* Initiator command queue stopper pointer. */
ADV_CARR_T *irq_sp; /* Initiator response queue stopper pointer. */
ushort carr_pending_cnt; /* Count of pending carriers. */
- struct adv_req *orig_reqp; /* adv_req_t memory block. */
/*
* Note: The following fields will not be used after initialization. The
* driver may discard the buffer after initialization is done.
@@ -2068,8 +2065,8 @@ do { \
AdvReadByteRegister((iop_base), IOPB_CHIP_TYPE_REV)
/*
- * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must
- * match the ASC_SCSI_REQ_Q 'srb_ptr' field.
+ * Abort an SRB in the chip's RISC Memory. The 'srb_tag' argument must
+ * match the ASC_SCSI_REQ_Q 'srb_tag' field.
*
* If the request has not yet been sent to the device it will simply be
* aborted from RISC memory. If the request is disconnected it will be
@@ -2079,9 +2076,9 @@ do { \
* ADV_TRUE(1) - Queue was successfully aborted.
* ADV_FALSE(0) - Queue was not found on the active queue list.
*/
-#define AdvAbortQueue(asc_dvc, scsiq) \
- AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT, \
- (ADV_DCNT) (scsiq))
+#define AdvAbortQueue(asc_dvc, srb_tag) \
+ AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT, \
+ (ADV_DCNT) (srb_tag))
/*
* Send a Bus Device Reset Message to the specified target ID.
@@ -2095,8 +2092,8 @@ do { \
* are not purged.
*/
#define AdvResetDevice(asc_dvc, target_id) \
- AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET, \
- (ADV_DCNT) (target_id))
+ AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET, \
+ (ADV_DCNT) (target_id))
/*
* SCSI Wide Type definition.
@@ -2345,6 +2342,7 @@ struct asc_stats {
*/
struct asc_board {
struct device *dev;
+ struct Scsi_Host *shost;
uint flags; /* Board flags */
unsigned int irq;
union {
@@ -2599,8 +2597,8 @@ static void asc_prt_asc_scsi_q(ASC_SCSI_Q *q)
printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong)q);
printk
- (" target_ix 0x%x, target_lun %u, srb_ptr 0x%lx, tag_code 0x%x,\n",
- q->q2.target_ix, q->q1.target_lun, (ulong)q->q2.srb_ptr,
+ (" target_ix 0x%x, target_lun %u, srb_tag 0x%x, tag_code 0x%x,\n",
+ q->q2.target_ix, q->q1.target_lun, q->q2.srb_tag,
q->q2.tag_code);
printk
@@ -2633,8 +2631,8 @@ static void asc_prt_asc_scsi_q(ASC_SCSI_Q *q)
static void asc_prt_asc_qdone_info(ASC_QDONE_INFO *q)
{
printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong)q);
- printk(" srb_ptr 0x%lx, target_ix %u, cdb_len %u, tag_code %u,\n",
- (ulong)q->d2.srb_ptr, q->d2.target_ix, q->d2.cdb_len,
+ printk(" srb_tag 0x%x, target_ix %u, cdb_len %u, tag_code %u,\n",
+ q->d2.srb_tag, q->d2.target_ix, q->d2.cdb_len,
q->d2.tag_code);
printk
(" done_stat 0x%x, host_stat 0x%x, scsi_stat 0x%x, scsi_msg 0x%x\n",
@@ -2676,8 +2674,8 @@ static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q);
- printk(" target_id %u, target_lun %u, srb_ptr 0x%lx, a_flag 0x%x\n",
- q->target_id, q->target_lun, (ulong)q->srb_ptr, q->a_flag);
+ printk(" target_id %u, target_lun %u, srb_tag 0x%x, a_flag 0x%x\n",
+ q->target_id, q->target_lun, q->srb_tag, q->a_flag);
printk(" cntl 0x%x, data_addr 0x%lx, vdata_addr 0x%lx\n",
q->cntl, (ulong)le32_to_cpu(q->data_addr), (ulong)q->vdata_addr);
@@ -2721,59 +2719,6 @@ static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
#endif /* ADVANSYS_DEBUG */
/*
- * The advansys chip/microcode contains a 32-bit identifier for each command
- * known as the 'srb'. I don't know what it stands for. The driver used
- * to encode the scsi_cmnd pointer by calling virt_to_bus and retrieve it
- * with bus_to_virt. Now the driver keeps a per-host map of integers to
- * pointers. It auto-expands when full, unless it can't allocate memory.
- * Note that an srb of 0 is treated specially by the chip/firmware, hence
- * the return of i+1 in this routine, and the corresponding subtraction in
- * the inverse routine.
- */
-#define BAD_SRB 0
-static u32 advansys_ptr_to_srb(struct asc_dvc_var *asc_dvc, void *ptr)
-{
- int i;
- void **new_ptr;
-
- for (i = 0; i < asc_dvc->ptr_map_count; i++) {
- if (!asc_dvc->ptr_map[i])
- goto out;
- }
-
- if (asc_dvc->ptr_map_count == 0)
- asc_dvc->ptr_map_count = 1;
- else
- asc_dvc->ptr_map_count *= 2;
-
- new_ptr = krealloc(asc_dvc->ptr_map,
- asc_dvc->ptr_map_count * sizeof(void *), GFP_ATOMIC);
- if (!new_ptr)
- return BAD_SRB;
- asc_dvc->ptr_map = new_ptr;
- out:
- ASC_DBG(3, "Putting ptr %p into array offset %d\n", ptr, i);
- asc_dvc->ptr_map[i] = ptr;
- return i + 1;
-}
-
-static void * advansys_srb_to_ptr(struct asc_dvc_var *asc_dvc, u32 srb)
-{
- void *ptr;
-
- srb--;
- if (srb >= asc_dvc->ptr_map_count) {
- printk("advansys: bad SRB %u, max %u\n", srb,
- asc_dvc->ptr_map_count);
- return NULL;
- }
- ptr = asc_dvc->ptr_map[srb];
- asc_dvc->ptr_map[srb] = NULL;
- ASC_DBG(3, "Returning ptr %p from array offset %d\n", ptr, srb);
- return ptr;
-}
-
-/*
* advansys_info()
*
* Return suitable for printing on the console with the argument
@@ -6133,15 +6078,15 @@ static void adv_async_callback(ADV_DVC_VAR *adv_dvc_varp, uchar code)
*/
static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
{
- struct asc_board *boardp;
+ struct asc_board *boardp = adv_dvc_varp->drv_ptr;
+ u32 srb_tag;
adv_req_t *reqp;
adv_sgblk_t *sgblkp;
struct scsi_cmnd *scp;
- struct Scsi_Host *shost;
ADV_DCNT resid_cnt;
- ASC_DBG(1, "adv_dvc_varp 0x%lx, scsiqp 0x%lx\n",
- (ulong)adv_dvc_varp, (ulong)scsiqp);
+ ASC_DBG(1, "adv_dvc_varp 0x%p, scsiqp 0x%p\n",
+ adv_dvc_varp, scsiqp);
ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp);
/*
@@ -6149,22 +6094,9 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
* completed. The adv_req_t structure actually contains the
* completed ADV_SCSI_REQ_Q structure.
*/
- reqp = (adv_req_t *)ADV_U32_TO_VADDR(scsiqp->srb_ptr);
- ASC_DBG(1, "reqp 0x%lx\n", (ulong)reqp);
- if (reqp == NULL) {
- ASC_PRINT("adv_isr_callback: reqp is NULL\n");
- return;
- }
+ srb_tag = le32_to_cpu(scsiqp->srb_tag);
+ scp = scsi_host_find_tag(boardp->shost, scsiqp->srb_tag);
- /*
- * Get the struct scsi_cmnd structure and Scsi_Host structure for the
- * command that has been completed.
- *
- * Note: The adv_req_t request structure and adv_sgblk_t structure,
- * if any, are dropped, because a board structure pointer can not be
- * determined.
- */
- scp = reqp->cmndp;
ASC_DBG(1, "scp 0x%p\n", scp);
if (scp == NULL) {
ASC_PRINT
@@ -6173,12 +6105,21 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
}
ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len);
- shost = scp->device->host;
- ASC_STATS(shost, callback);
- ASC_DBG(1, "shost 0x%p\n", shost);
+ reqp = (adv_req_t *)scp->host_scribble;
+ ASC_DBG(1, "reqp 0x%lx\n", (ulong)reqp);
+ if (reqp == NULL) {
+ ASC_PRINT("adv_isr_callback: reqp is NULL\n");
+ return;
+ }
+ /*
+ * Remove backreferences to avoid duplicate
+ * command completions.
+ */
+ scp->host_scribble = NULL;
+ reqp->cmndp = NULL;
- boardp = shost_priv(shost);
- BUG_ON(adv_dvc_varp != &boardp->dvc_var.adv_dvc_var);
+ ASC_STATS(boardp->shost, callback);
+ ASC_DBG(1, "shost 0x%p\n", boardp->shost);
/*
* 'done_status' contains the command's ending status.
@@ -6276,13 +6217,6 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
boardp->adv_sgblkp = sgblkp;
}
- /*
- * Free the adv_req_t structure used with the command by adding
- * it back to the board free list.
- */
- reqp->next_reqp = boardp->adv_reqp;
- boardp->adv_reqp = reqp;
-
ASC_DBG(1, "done\n");
}
@@ -7092,25 +7026,24 @@ _AscCopyLramScsiDoneQ(PortAddr iop_base,
*/
static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep)
{
- struct asc_board *boardp;
+ struct asc_board *boardp = asc_dvc_varp->drv_ptr;
+ u32 srb_tag;
struct scsi_cmnd *scp;
- struct Scsi_Host *shost;
ASC_DBG(1, "asc_dvc_varp 0x%p, qdonep 0x%p\n", asc_dvc_varp, qdonep);
ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep);
- scp = advansys_srb_to_ptr(asc_dvc_varp, qdonep->d2.srb_ptr);
+ /*
+ * Decrease the srb_tag by 1 to find the SCSI command
+ */
+ srb_tag = qdonep->d2.srb_tag - 1;
+ scp = scsi_host_find_tag(boardp->shost, srb_tag);
if (!scp)
return;
ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len);
- shost = scp->device->host;
- ASC_STATS(shost, callback);
- ASC_DBG(1, "shost 0x%p\n", shost);
-
- boardp = shost_priv(shost);
- BUG_ON(asc_dvc_varp != &boardp->dvc_var.asc_dvc_var);
+ ASC_STATS(boardp->shost, callback);
dma_unmap_single(boardp->dev, scp->SCp.dma_handle,
SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
@@ -7293,7 +7226,7 @@ static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
scsiq->d3.done_stat = QD_WITH_ERROR;
goto FATAL_ERR_QDONE;
}
- if ((scsiq->d2.srb_ptr == 0UL) ||
+ if ((scsiq->d2.srb_tag == 0UL) ||
((scsiq->q_status & QS_ABORTED) != 0)) {
return (0x11);
} else if (scsiq->q_status == QS_DONE) {
@@ -7861,17 +7794,16 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
{
struct asc_dvc_var *asc_dvc = &boardp->dvc_var.asc_dvc_var;
int use_sg;
+ u32 srb_tag;
memset(asc_scsi_q, 0, sizeof(*asc_scsi_q));
/*
- * Point the ASC_SCSI_Q to the 'struct scsi_cmnd'.
+ * Set the srb_tag to the command tag + 1, as
+ * srb_tag '0' is used internally by the chip.
*/
- asc_scsi_q->q2.srb_ptr = advansys_ptr_to_srb(asc_dvc, scp);
- if (asc_scsi_q->q2.srb_ptr == BAD_SRB) {
- scp->result = HOST_BYTE(DID_SOFT_ERROR);
- return ASC_ERROR;
- }
+ srb_tag = scp->request->tag + 1;
+ asc_scsi_q->q2.srb_tag = srb_tag;
/*
* Build the ASC_SCSI_Q request.
@@ -8083,6 +8015,7 @@ static int
adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
ADV_SCSI_REQ_Q **adv_scsiqpp)
{
+ u32 srb_tag = scp->request->tag;
adv_req_t *reqp;
ADV_SCSI_REQ_Q *scsiqp;
int i;
@@ -8093,14 +8026,11 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
* Allocate an adv_req_t structure from the board to execute
* the command.
*/
- if (boardp->adv_reqp == NULL) {
+ reqp = &boardp->adv_reqp[srb_tag];
+ if (reqp->cmndp && reqp->cmndp != scp ) {
ASC_DBG(1, "no free adv_req_t\n");
ASC_STATS(scp->device->host, adv_build_noreq);
return ASC_BUSY;
- } else {
- reqp = boardp->adv_reqp;
- boardp->adv_reqp = reqp->next_reqp;
- reqp->next_reqp = NULL;
}
/*
@@ -8114,14 +8044,15 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
scsiqp->cntl = scsiqp->scsi_cntl = scsiqp->done_status = 0;
/*
- * Set the ADV_SCSI_REQ_Q 'srb_ptr' to point to the adv_req_t structure.
+ * Set the srb_tag to the command tag.
*/
- scsiqp->srb_ptr = ADV_VADDR_TO_U32(reqp);
+ scsiqp->srb_tag = srb_tag;
/*
* Set the adv_req_t 'cmndp' to point to the struct scsi_cmnd structure.
*/
reqp->cmndp = scp;
+ scp->host_scribble = (void *)reqp;
/*
* Build the ADV_SCSI_REQ_Q request.
@@ -8163,13 +8094,8 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
scp->device->host->sg_tablesize);
scsi_dma_unmap(scp);
scp->result = HOST_BYTE(DID_ERROR);
-
- /*
- * Free the 'adv_req_t' structure by adding it back
- * to the board free list.
- */
- reqp->next_reqp = boardp->adv_reqp;
- boardp->adv_reqp = reqp;
+ reqp->cmndp = NULL;
+ scp->host_scribble = NULL;
return ASC_ERROR;
}
@@ -8178,12 +8104,10 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
ret = adv_get_sglist(boardp, reqp, scp, use_sg);
if (ret != ADV_SUCCESS) {
- /*
- * Free the adv_req_t structure by adding it back to
- * the board free list.
- */
- reqp->next_reqp = boardp->adv_reqp;
- boardp->adv_reqp = reqp;
+ scsi_dma_unmap(scp);
+ scp->result = HOST_BYTE(DID_ERROR);
+ reqp->cmndp = NULL;
+ scp->host_scribble = NULL;
return ret;
}
@@ -11244,6 +11168,7 @@ static struct scsi_host_template advansys_template = {
* by enabling clustering, I/O throughput increases as well.
*/
.use_clustering = ENABLE_CLUSTERING,
+ .use_blk_tags = 1,
};
static int advansys_wide_init_chip(struct Scsi_Host *shost)
@@ -11272,7 +11197,7 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
* If the allocation fails decrement and try again.
*/
for (req_cnt = adv_dvc->max_host_qng; req_cnt > 0; req_cnt--) {
- reqp = kmalloc(sizeof(adv_req_t) * req_cnt, GFP_KERNEL);
+ reqp = kzalloc(sizeof(adv_req_t) * req_cnt, GFP_KERNEL);
ASC_DBG(1, "reqp 0x%p, req_cnt %d, bytes %lu\n", reqp, req_cnt,
(ulong)sizeof(adv_req_t) * req_cnt);
@@ -11284,7 +11209,7 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
if (!reqp)
goto kmalloc_failed;
- adv_dvc->orig_reqp = reqp;
+ board->adv_reqp = reqp;
/*
* Allocate up to ADV_TOT_SG_BLOCK request structures for
@@ -11317,7 +11242,6 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
for (; req_cnt > 0; req_cnt--) {
reqp[req_cnt - 1].next_reqp = &reqp[req_cnt];
}
- board->adv_reqp = &reqp[0];
if (adv_dvc->chip_type == ADV_CHIP_ASC3550) {
ASC_DBG(2, "AdvInitAsc3550Driver()\n");
@@ -11350,8 +11274,8 @@ static void advansys_wide_free_mem(struct asc_board *board)
struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var;
kfree(adv_dvc->carrier_buf);
adv_dvc->carrier_buf = NULL;
- kfree(adv_dvc->orig_reqp);
- adv_dvc->orig_reqp = board->adv_reqp = NULL;
+ kfree(board->adv_reqp);
+ board->adv_reqp = NULL;
while (board->adv_sgblkp) {
adv_sgblk_t *sgp = board->adv_sgblkp;
board->adv_sgblkp = sgp->next_sgblkp;
@@ -11651,6 +11575,11 @@ static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
/* Set maximum number of queues the adapter can handle. */
shost->can_queue = adv_dvc_varp->max_host_qng;
}
+ ret = scsi_init_shared_tag_map(shost, shost->can_queue);
+ if (ret) {
+ shost_printk(KERN_ERR, shost, "init tag map failed\n");
+ goto err_free_dma;
+ }
/*
* Following v1.3.89, 'cmd_per_lun' is no longer needed
@@ -11922,6 +11851,7 @@ static int advansys_isa_probe(struct device *dev, unsigned int id)
board = shost_priv(shost);
board->irq = advansys_isa_irq_no(iop_base);
board->dev = dev;
+ board->shost = shost;
err = advansys_board_found(shost, iop_base, ASC_IS_ISA);
if (err)
@@ -12004,6 +11934,7 @@ static int advansys_vlb_probe(struct device *dev, unsigned int id)
board = shost_priv(shost);
board->irq = advansys_vlb_irq_no(iop_base);
board->dev = dev;
+ board->shost = shost;
err = advansys_board_found(shost, iop_base, ASC_IS_VL);
if (err)
@@ -12111,6 +12042,7 @@ static int advansys_eisa_probe(struct device *dev)
board = shost_priv(shost);
board->irq = irq;
board->dev = dev;
+ board->shost = shost;
err = advansys_board_found(shost, ioport, ASC_IS_EISA);
if (!err) {
@@ -12227,6 +12159,7 @@ static int advansys_pci_probe(struct pci_dev *pdev,
board = shost_priv(shost);
board->irq = pdev->irq;
board->dev = &pdev->dev;
+ board->shost = shost;
if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW ||
pdev->device == PCI_DEVICE_ID_38C0800_REV1 ||
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 03/22] advansys: use DMA-API for mapping sense buffer
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
2015-04-24 8:32 ` [PATCH 01/22] advansys: use host_reset Hannes Reinecke
2015-04-24 8:32 ` [PATCH 02/22] advansys: use shared host tag map for command lookup Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 04/22] advansys: Use DMA-API for carrier buffer Hannes Reinecke
` (18 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index b595e8b..a45e78f 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -1844,7 +1844,7 @@ typedef struct adv_scsi_req_q {
uchar target_lun; /* Device target logical unit number. */
ADV_PADDR data_addr; /* Data buffer physical address. */
ADV_DCNT data_cnt; /* Data count. Ucode sets to residual. */
- ADV_PADDR sense_addr;
+ __le32 sense_addr;
ADV_PADDR carr_pa;
uchar mflag;
uchar sense_len;
@@ -6084,6 +6084,7 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
adv_sgblk_t *sgblkp;
struct scsi_cmnd *scp;
ADV_DCNT resid_cnt;
+ dma_addr_t sense_addr;
ASC_DBG(1, "adv_dvc_varp 0x%p, scsiqp 0x%p\n",
adv_dvc_varp, scsiqp);
@@ -6121,6 +6122,10 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
ASC_STATS(boardp->shost, callback);
ASC_DBG(1, "shost 0x%p\n", boardp->shost);
+ sense_addr = le32_to_cpu(scsiqp->sense_addr);
+ dma_unmap_single(boardp->dev, sense_addr,
+ SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+
/*
* 'done_status' contains the command's ending status.
*/
@@ -8018,9 +8023,9 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
u32 srb_tag = scp->request->tag;
adv_req_t *reqp;
ADV_SCSI_REQ_Q *scsiqp;
- int i;
int ret;
int use_sg;
+ dma_addr_t sense_addr;
/*
* Allocate an adv_req_t structure from the board to execute
@@ -8061,19 +8066,23 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
/* Set CDB length and copy it to the request structure. */
scsiqp->cdb_len = scp->cmd_len;
/* Copy first 12 CDB bytes to cdb[]. */
- for (i = 0; i < scp->cmd_len && i < 12; i++) {
- scsiqp->cdb[i] = scp->cmnd[i];
- }
+ memcpy(scsiqp->cdb, scp->cmnd, scp->cmd_len < 12 ? scp->cmd_len : 12);
/* Copy last 4 CDB bytes, if present, to cdb16[]. */
- for (; i < scp->cmd_len; i++) {
- scsiqp->cdb16[i - 12] = scp->cmnd[i];
+ if (scp->cmd_len > 12) {
+ int cdb16_len = scp->cmd_len - 12;
+
+ memcpy(scsiqp->cdb16, &scp->cmnd[12], cdb16_len);
}
scsiqp->target_id = scp->device->id;
scsiqp->target_lun = scp->device->lun;
- scsiqp->sense_addr = cpu_to_le32(virt_to_bus(&scp->sense_buffer[0]));
- scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE;
+ sense_addr = dma_map_single(boardp->dev, scp->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+ scsiqp->sense_addr = cpu_to_le32(sense_addr);
+ scsiqp->sense_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
+ dma_cache_sync(boardp->dev, scp->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
/* Build ADV_SCSI_REQ_Q */
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 04/22] advansys: Use DMA-API for carrier buffer
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (2 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 03/22] advansys: use DMA-API for mapping sense buffer Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 05/22] advansys: Use DMA-API for mapping request blocks Hannes Reinecke
` (17 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 236 +++++++++++++++++++++---------------------------
1 file changed, 103 insertions(+), 133 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index a45e78f..25bd17d 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -963,8 +963,6 @@ typedef struct asc_mc_saved {
#define ADV_MEM_WRITEW(addr, word) writew(word, addr)
#define ADV_MEM_WRITEDW(addr, dword) writel(dword, addr)
-#define ADV_CARRIER_COUNT (ASC_DEF_MAX_HOST_QNG + 15)
-
/*
* Define total number of simultaneous maximum element scatter-gather
* request blocks per wide adapter. ASC_DEF_MAX_HOST_QNG (253) is the
@@ -1745,16 +1743,16 @@ typedef struct adveep_38C1600_config {
* little-endian.
*/
typedef struct adv_carr_t {
- ADV_VADDR carr_va; /* Carrier Virtual Address */
- ADV_PADDR carr_pa; /* Carrier Physical Address */
- ADV_VADDR areq_vpa; /* ASC_SCSI_REQ_Q Virtual or Physical Address */
+ __le32 carr_va; /* Carrier Virtual Address */
+ __le32 carr_pa; /* Carrier Physical Address */
+ __le32 areq_vpa; /* ASC_SCSI_REQ_Q Virtual or Physical Address */
/*
* next_vpa [31:4] Carrier Virtual or Physical Next Pointer
*
* next_vpa [3:1] Reserved Bits
* next_vpa [0] Done Flag set in Response Queue.
*/
- ADV_VADDR next_vpa;
+ __le32 next_vpa;
} ADV_CARR_T;
/*
@@ -1768,11 +1766,14 @@ typedef struct adv_carr_t {
#define ASC_GET_CARRP(carrp) ((carrp) & ASC_NEXT_VPA_MASK)
-#define ADV_CARRIER_NUM_PAGE_CROSSING \
- (((ADV_CARRIER_COUNT * sizeof(ADV_CARR_T)) + (PAGE_SIZE - 1))/PAGE_SIZE)
+/*
+ * Each carrier is 64 bytes, and we need three additional
+ * carrier for icq, irq, and the termination carrier.
+ */
+#define ADV_CARRIER_COUNT (ASC_DEF_MAX_HOST_QNG + 3)
#define ADV_CARRIER_BUFSIZE \
- ((ADV_CARRIER_COUNT + ADV_CARRIER_NUM_PAGE_CROSSING) * sizeof(ADV_CARR_T))
+ (ADV_CARRIER_COUNT * sizeof(ADV_CARR_T))
/*
* ASC_SCSI_REQ_Q 'a_flag' definitions
@@ -1845,7 +1846,7 @@ typedef struct adv_scsi_req_q {
ADV_PADDR data_addr; /* Data buffer physical address. */
ADV_DCNT data_cnt; /* Data count. Ucode sets to residual. */
__le32 sense_addr;
- ADV_PADDR carr_pa;
+ __le32 carr_pa;
uchar mflag;
uchar sense_len;
uchar cdb_len; /* SCSI CDB length. Must <= 16 bytes. */
@@ -1856,19 +1857,18 @@ typedef struct adv_scsi_req_q {
uchar sg_working_ix;
uchar cdb[12]; /* SCSI CDB bytes 0-11. */
ADV_PADDR sg_real_addr; /* SG list physical address. */
- ADV_PADDR scsiq_rptr;
+ __le32 scsiq_rptr;
uchar cdb16[4]; /* SCSI CDB bytes 12-15. */
- ADV_VADDR scsiq_ptr;
- ADV_VADDR carr_va;
+ __le32 scsiq_ptr;
+ __le32 carr_va;
/*
* End of microcode structure - 60 bytes. The rest of the structure
* is used by the Adv Library and ignored by the microcode.
*/
u32 srb_tag;
- ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */
- char *vdata_addr; /* Data buffer virtual address. */
uchar a_flag;
- uchar pad[2]; /* Pad out to a word boundary. */
+ uchar pad[3]; /* Pad out to a word boundary. */
+ ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */
} ADV_SCSI_REQ_Q;
/*
@@ -1935,8 +1935,9 @@ typedef struct adv_dvc_var {
uchar chip_scsi_id; /* chip SCSI target ID */
uchar chip_type;
uchar bist_err_code;
- ADV_CARR_T *carrier_buf;
+ ADV_CARR_T *carrier;
ADV_CARR_T *carr_freelist; /* Carrier free list. */
+ dma_addr_t carrier_addr;
ADV_CARR_T *icq_sp; /* Initiator command queue stopper pointer. */
ADV_CARR_T *irq_sp; /* Initiator response queue stopper pointer. */
ushort carr_pending_cnt; /* Count of pending carriers. */
@@ -2467,12 +2468,11 @@ static void asc_prt_adv_dvc_var(ADV_DVC_VAR *h)
printk(" start_motor 0x%x, scsi_reset_wait 0x%x\n",
(unsigned)h->start_motor, (unsigned)h->scsi_reset_wait);
- printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%lxn\n",
+ printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%p\n",
(unsigned)h->max_host_qng, (unsigned)h->max_dvc_qng,
- (ulong)h->carr_freelist);
+ h->carr_freelist);
- printk(" icq_sp 0x%lx, irq_sp 0x%lx\n",
- (ulong)h->icq_sp, (ulong)h->irq_sp);
+ printk(" icq_sp 0x%p, irq_sp 0x%p\n", h->icq_sp, h->irq_sp);
printk(" no_scam 0x%x, tagqng_able 0x%x\n",
(unsigned)h->no_scam, (unsigned)h->tagqng_able);
@@ -2677,8 +2677,8 @@ static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
printk(" target_id %u, target_lun %u, srb_tag 0x%x, a_flag 0x%x\n",
q->target_id, q->target_lun, q->srb_tag, q->a_flag);
- printk(" cntl 0x%x, data_addr 0x%lx, vdata_addr 0x%lx\n",
- q->cntl, (ulong)le32_to_cpu(q->data_addr), (ulong)q->vdata_addr);
+ printk(" cntl 0x%x, data_addr 0x%lx\n",
+ q->cntl, (ulong)le32_to_cpu(q->data_addr));
printk(" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n",
(ulong)le32_to_cpu(q->data_cnt),
@@ -4326,38 +4326,61 @@ static int AdvLoadMicrocode(AdvPortAddr iop_base, const unsigned char *buf,
return 0;
}
-static void AdvBuildCarrierFreelist(struct adv_dvc_var *asc_dvc)
+static void AdvBuildCarrierFreelist(struct adv_dvc_var *adv_dvc)
{
- ADV_CARR_T *carrp;
- ADV_SDCNT buf_size;
- ADV_PADDR carr_paddr;
+ off_t carr_offset = 0, next_offset;
+ dma_addr_t carr_paddr;
+ int carr_num = ADV_CARRIER_BUFSIZE / sizeof(ADV_CARR_T), i;
- carrp = (ADV_CARR_T *) ADV_16BALIGN(asc_dvc->carrier_buf);
- asc_dvc->carr_freelist = NULL;
- if (carrp == asc_dvc->carrier_buf) {
- buf_size = ADV_CARRIER_BUFSIZE;
- } else {
- buf_size = ADV_CARRIER_BUFSIZE - sizeof(ADV_CARR_T);
+ for (i = 0; i < carr_num; i++) {
+ carr_offset = i * sizeof(ADV_CARR_T);
+ /* Get physical address of the carrier 'carrp'. */
+ carr_paddr = adv_dvc->carrier_addr + carr_offset;
+
+ adv_dvc->carrier[i].carr_pa = cpu_to_le32(carr_paddr);
+ adv_dvc->carrier[i].carr_va = cpu_to_le32(carr_offset);
+ adv_dvc->carrier[i].areq_vpa = 0;
+ next_offset = carr_offset + sizeof(ADV_CARR_T);
+ if (i == carr_num)
+ next_offset = ~0;
+ adv_dvc->carrier[i].next_vpa = cpu_to_le32(next_offset);
}
+ /*
+ * We cannot have a carrier with 'carr_va' of '0', as
+ * a reference to this carrier would be interpreted as
+ * list termination.
+ * So start at carrier 1 with the freelist.
+ */
+ adv_dvc->carr_freelist = &adv_dvc->carrier[1];
+}
- do {
- /* Get physical address of the carrier 'carrp'. */
- carr_paddr = cpu_to_le32(virt_to_bus(carrp));
+static ADV_CARR_T *adv_get_carrier(struct adv_dvc_var *adv_dvc, u32 offset)
+{
+ int index;
- buf_size -= sizeof(ADV_CARR_T);
+ BUG_ON(offset > ADV_CARRIER_BUFSIZE);
- carrp->carr_pa = carr_paddr;
- carrp->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(carrp));
+ index = offset / sizeof(ADV_CARR_T);
+ return &adv_dvc->carrier[index];
+}
- /*
- * Insert the carrier at the beginning of the freelist.
- */
- carrp->next_vpa =
- cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist));
- asc_dvc->carr_freelist = carrp;
+static ADV_CARR_T *adv_get_next_carrier(struct adv_dvc_var *adv_dvc)
+{
+ ADV_CARR_T *carrp = adv_dvc->carr_freelist;
+ u32 next_vpa = le32_to_cpu(carrp->next_vpa);
+
+ if (next_vpa == 0 || next_vpa == ~0) {
+ ASC_DBG(1, "invalid vpa offset 0x%x\n", next_vpa);
+ return NULL;
+ }
- carrp++;
- } while (buf_size > 0);
+ adv_dvc->carr_freelist = adv_get_carrier(adv_dvc, next_vpa);
+ /*
+ * insert stopper carrier to terminate list
+ */
+ carrp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+
+ return carrp;
}
/*
@@ -4846,17 +4869,11 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
* Set-up the Host->RISC Initiator Command Queue (ICQ).
*/
- if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) {
+ asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc);
+ if (!asc_dvc->icq_sp) {
asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
return ADV_ERROR;
}
- asc_dvc->carr_freelist = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa));
-
- /*
- * The first command issued will be placed in the stopper carrier.
- */
- asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
/*
* Set RISC ICQ physical address start value.
@@ -4866,21 +4883,11 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
/*
* Set-up the RISC->Host Initiator Response Queue (IRQ).
*/
- if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) {
+ asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc);
+ if (!asc_dvc->irq_sp) {
asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
return ADV_ERROR;
}
- asc_dvc->carr_freelist = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa));
-
- /*
- * The first command completed by the RISC will be placed in
- * the stopper.
- *
- * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is
- * completed the RISC will set the ASC_RQ_STOPPER bit.
- */
- asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
/*
* Set RISC IRQ physical address start value.
@@ -5343,17 +5350,12 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
* Set-up the Host->RISC Initiator Command Queue (ICQ).
*/
- if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) {
+ asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc);
+ if (!asc_dvc->icq_sp) {
+ ASC_DBG(0, "Failed to get ICQ carrier\n");
asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
return ADV_ERROR;
}
- asc_dvc->carr_freelist = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa));
-
- /*
- * The first command issued will be placed in the stopper carrier.
- */
- asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
/*
* Set RISC ICQ physical address start value.
@@ -5364,21 +5366,12 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
/*
* Set-up the RISC->Host Initiator Response Queue (IRQ).
*/
- if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) {
+ asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc);
+ if (!asc_dvc->irq_sp) {
+ ASC_DBG(0, "Failed to get IRQ carrier\n");
asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
return ADV_ERROR;
}
- asc_dvc->carr_freelist = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa));
-
- /*
- * The first command completed by the RISC will be placed in
- * the stopper.
- *
- * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is
- * completed the RISC will set the ASC_RQ_STOPPER bit.
- */
- asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
/*
* Set RISC IRQ physical address start value.
@@ -5853,17 +5846,11 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
/*
* Set-up the Host->RISC Initiator Command Queue (ICQ).
*/
- if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) {
+ asc_dvc->icq_sp = adv_get_next_carrier(asc_dvc);
+ if (!asc_dvc->icq_sp) {
asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
return ADV_ERROR;
}
- asc_dvc->carr_freelist = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa));
-
- /*
- * The first command issued will be placed in the stopper carrier.
- */
- asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
/*
* Set RISC ICQ physical address start value. Initialize the
@@ -5877,21 +5864,11 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
/*
* Set-up the RISC->Host Initiator Response Queue (IRQ).
*/
- if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) {
+ asc_dvc->irq_sp = adv_get_next_carrier(asc_dvc);
+ if (!asc_dvc->irq_sp) {
asc_dvc->err_code |= ASC_IERR_NO_CARRIER;
return ADV_ERROR;
}
- asc_dvc->carr_freelist = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa));
-
- /*
- * The first command completed by the RISC will be placed in
- * the stopper.
- *
- * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is
- * completed the RISC will set the ASC_RQ_STOPPER bit.
- */
- asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
/*
* Set RISC IRQ physical address start value.
@@ -6324,11 +6301,10 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
* stopper carrier.
*/
free_carrp = asc_dvc->irq_sp;
- asc_dvc->irq_sp = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(ASC_GET_CARRP(irq_next_vpa));
+ asc_dvc->irq_sp = adv_get_carrier(asc_dvc,
+ ASC_GET_CARRP(irq_next_vpa));
- free_carrp->next_vpa =
- cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist));
+ free_carrp->next_vpa = asc_dvc->carr_freelist->carr_va;
asc_dvc->carr_freelist = free_carrp;
asc_dvc->carr_pending_cnt--;
@@ -8091,7 +8067,6 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
/* Zero-length transfer */
reqp->sgblkp = NULL;
scsiqp->data_cnt = 0;
- scsiqp->vdata_addr = NULL;
scsiqp->data_addr = 0;
scsiqp->sg_list_ptr = NULL;
@@ -8740,19 +8715,13 @@ static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq)
* Allocate a carrier ensuring at least one carrier always
* remains on the freelist and initialize fields.
*/
- if ((new_carrp = asc_dvc->carr_freelist) == NULL) {
+ new_carrp = adv_get_next_carrier(asc_dvc);
+ if (!new_carrp) {
+ ASC_DBG(1, "No free carriers\n");
return ADV_BUSY;
}
- asc_dvc->carr_freelist = (ADV_CARR_T *)
- ADV_U32_TO_VADDR(le32_to_cpu(new_carrp->next_vpa));
- asc_dvc->carr_pending_cnt++;
- /*
- * Set the carrier to be a stopper by setting 'next_vpa'
- * to the stopper value. The current stopper will be changed
- * below to point to the new stopper.
- */
- new_carrp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+ asc_dvc->carr_pending_cnt++;
/*
* Clear the ADV_SCSI_REQ_Q done flag.
@@ -8768,11 +8737,7 @@ static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq)
scsiq->scsiq_ptr = cpu_to_le32(ADV_VADDR_TO_U32(scsiq));
scsiq->scsiq_rptr = req_paddr;
- scsiq->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->icq_sp));
- /*
- * Every ADV_CARR_T.carr_pa is byte swapped to little-endian
- * order during initialization.
- */
+ scsiq->carr_va = asc_dvc->icq_sp->carr_va;
scsiq->carr_pa = asc_dvc->icq_sp->carr_pa;
/*
@@ -11192,12 +11157,13 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
/*
* Allocate buffer carrier structures. The total size
- * is about 4 KB, so allocate all at once.
+ * is about 8 KB, so allocate all at once.
*/
- adv_dvc->carrier_buf = kmalloc(ADV_CARRIER_BUFSIZE, GFP_KERNEL);
- ASC_DBG(1, "carrier_buf 0x%p\n", adv_dvc->carrier_buf);
+ adv_dvc->carrier = dma_alloc_coherent(board->dev,
+ ADV_CARRIER_BUFSIZE, &adv_dvc->carrier_addr, GFP_KERNEL);
+ ASC_DBG(1, "carrier 0x%p\n", adv_dvc->carrier);
- if (!adv_dvc->carrier_buf)
+ if (!adv_dvc->carrier)
goto kmalloc_failed;
/*
@@ -11281,8 +11247,12 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
static void advansys_wide_free_mem(struct asc_board *board)
{
struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var;
- kfree(adv_dvc->carrier_buf);
- adv_dvc->carrier_buf = NULL;
+
+ if (adv_dvc->carrier) {
+ dma_free_coherent(board->dev, ADV_CARRIER_BUFSIZE,
+ adv_dvc->carrier, adv_dvc->carrier_addr);
+ adv_dvc->carrier = NULL;
+ }
kfree(board->adv_reqp);
board->adv_reqp = NULL;
while (board->adv_sgblkp) {
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 05/22] advansys: Use DMA-API for mapping request blocks
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (3 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 04/22] advansys: Use DMA-API for carrier buffer Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 06/22] advansys: Use dma_pool for sg elements Hannes Reinecke
` (16 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 108 ++++++++++++++++++++++++------------------------
1 file changed, 54 insertions(+), 54 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 25bd17d..03a3829 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -1894,11 +1894,11 @@ typedef struct adv_sgblk {
typedef struct adv_req {
ADV_SCSI_REQ_Q scsi_req_q; /* Adv Library request structure. */
- uchar align[32]; /* Request structure padding. */
+ uchar align[24]; /* Request structure padding. */
struct scsi_cmnd *cmndp; /* Mid-Level SCSI command pointer. */
+ dma_addr_t req_addr;
adv_sgblk_t *sgblkp; /* Adv Library scatter-gather pointer. */
- struct adv_req *next_reqp; /* Next Request Structure. */
-} adv_req_t;
+} adv_req_t __aligned(32);
/*
* Adapter operation variable structure.
@@ -2379,6 +2379,8 @@ struct asc_board {
void __iomem *ioremap_addr; /* I/O Memory remap address. */
ushort ioport; /* I/O Port address. */
adv_req_t *adv_reqp; /* Request structures. */
+ dma_addr_t adv_reqp_addr;
+ size_t adv_reqp_size;
adv_sgblk_t *adv_sgblkp; /* Scatter-gather structures. */
ushort bios_signature; /* BIOS Signature. */
ushort bios_version; /* BIOS Version. */
@@ -4384,6 +4386,17 @@ static ADV_CARR_T *adv_get_next_carrier(struct adv_dvc_var *adv_dvc)
}
/*
+ * 'offset' is the index in the request pointer array
+ */
+static adv_req_t * adv_get_reqp(struct adv_dvc_var *adv_dvc, u32 offset)
+{
+ struct asc_board *boardp = adv_dvc->drv_ptr;
+
+ BUG_ON(offset > adv_dvc->max_host_qng);
+ return &boardp->adv_reqp[offset];
+}
+
+/*
* Send an idle command to the chip and wait for completion.
*
* Command completion is polled for once per microsecond.
@@ -6229,6 +6242,7 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
ADV_CARR_T *free_carrp;
ADV_VADDR irq_next_vpa;
ADV_SCSI_REQ_Q *scsiq;
+ adv_req_t *reqp;
iop_base = asc_dvc->iop_base;
@@ -6281,8 +6295,11 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
* below complements the conversion of ASC_SCSI_REQ_Q.scsiq_ptr'
* in AdvExeScsiQueue().
*/
- scsiq = (ADV_SCSI_REQ_Q *)
- ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->areq_vpa));
+ u32 pa_offset = le32_to_cpu(asc_dvc->irq_sp->areq_vpa);
+ ASC_DBG(1, "irq_sp %p areq_vpa %u\n",
+ asc_dvc->irq_sp, pa_offset);
+ reqp = adv_get_reqp(asc_dvc, pa_offset);
+ scsiq = &reqp->scsi_req_q;
/*
* Request finished with good status and the queue was not
@@ -7883,18 +7900,16 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
* ADV_ERROR(-1) - SG List creation failed
*/
static int
-adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp, struct scsi_cmnd *scp,
- int use_sg)
+adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
+ ADV_SCSI_REQ_Q *scsiqp, struct scsi_cmnd *scp, int use_sg)
{
adv_sgblk_t *sgblkp;
- ADV_SCSI_REQ_Q *scsiqp;
struct scatterlist *slp;
int sg_elem_cnt;
ADV_SG_BLOCK *sg_block, *prev_sg_block;
ADV_PADDR sg_block_paddr;
int i;
- scsiqp = (ADV_SCSI_REQ_Q *)ADV_32BALIGN(&reqp->scsi_req_q);
slp = scsi_sglist(scp);
sg_elem_cnt = use_sg;
prev_sg_block = NULL;
@@ -7994,7 +8009,7 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp, struct scsi_cmnd *scp,
*/
static int
adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
- ADV_SCSI_REQ_Q **adv_scsiqpp)
+ adv_req_t **adv_reqpp)
{
u32 srb_tag = scp->request->tag;
adv_req_t *reqp;
@@ -8014,10 +8029,9 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
return ASC_BUSY;
}
- /*
- * Get 32-byte aligned ADV_SCSI_REQ_Q and ADV_SG_BLOCK pointers.
- */
- scsiqp = (ADV_SCSI_REQ_Q *)ADV_32BALIGN(&reqp->scsi_req_q);
+ reqp->req_addr = boardp->adv_reqp_addr + (srb_tag * sizeof(adv_req_t));
+
+ scsiqp = &reqp->scsi_req_q;
/*
* Initialize the structure.
@@ -8030,7 +8044,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
scsiqp->srb_tag = srb_tag;
/*
- * Set the adv_req_t 'cmndp' to point to the struct scsi_cmnd structure.
+ * Set 'host_scribble' to point to the adv_req_t structure.
*/
reqp->cmndp = scp;
scp->host_scribble = (void *)reqp;
@@ -8086,7 +8100,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
scsiqp->data_cnt = cpu_to_le32(scsi_bufflen(scp));
- ret = adv_get_sglist(boardp, reqp, scp, use_sg);
+ ret = adv_get_sglist(boardp, reqp, scsiqp, scp, use_sg);
if (ret != ADV_SUCCESS) {
scsi_dma_unmap(scp);
scp->result = HOST_BYTE(DID_ERROR);
@@ -8104,7 +8118,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp);
ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len);
- *adv_scsiqpp = scsiqp;
+ *adv_reqpp = reqp;
return ASC_NOERROR;
}
@@ -8694,11 +8708,11 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
* ADV_ERROR(-1) - Invalid ADV_SCSI_REQ_Q request structure
* host IC error.
*/
-static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq)
+static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, adv_req_t *reqp)
{
AdvPortAddr iop_base;
- ADV_PADDR req_paddr;
ADV_CARR_T *new_carrp;
+ ADV_SCSI_REQ_Q *scsiq = &reqp->scsi_req_q;
/*
* The ADV_SCSI_REQ_Q 'target_id' field should never exceed ADV_MAX_TID.
@@ -8728,14 +8742,9 @@ static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq)
*/
scsiq->a_flag &= ~ADV_SCSIQ_DONE;
- req_paddr = virt_to_bus(scsiq);
- BUG_ON(req_paddr & 31);
- /* Wait for assertion before making little-endian */
- req_paddr = cpu_to_le32(req_paddr);
-
/* Save virtual and physical address of ADV_SCSI_REQ_Q and carrier. */
- scsiq->scsiq_ptr = cpu_to_le32(ADV_VADDR_TO_U32(scsiq));
- scsiq->scsiq_rptr = req_paddr;
+ scsiq->scsiq_ptr = cpu_to_le32(scsiq->srb_tag);
+ scsiq->scsiq_rptr = cpu_to_le32(reqp->req_addr);
scsiq->carr_va = asc_dvc->icq_sp->carr_va;
scsiq->carr_pa = asc_dvc->icq_sp->carr_pa;
@@ -8745,7 +8754,7 @@ static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq)
* the microcode. The newly allocated stopper will become the new
* stopper.
*/
- asc_dvc->icq_sp->areq_vpa = req_paddr;
+ asc_dvc->icq_sp->areq_vpa = scsiq->scsiq_rptr;
/*
* Set the 'next_vpa' pointer for the old stopper to be the
@@ -8812,9 +8821,9 @@ static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
err_code = asc_dvc->err_code;
} else {
ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var;
- ADV_SCSI_REQ_Q *adv_scsiqp;
+ adv_req_t *adv_reqp;
- switch (adv_build_req(boardp, scp, &adv_scsiqp)) {
+ switch (adv_build_req(boardp, scp, &adv_reqp)) {
case ASC_NOERROR:
ASC_DBG(3, "adv_build_req ASC_NOERROR\n");
break;
@@ -8834,7 +8843,7 @@ static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
return ASC_ERROR;
}
- ret = AdvExeScsiQueue(adv_dvc, adv_scsiqp);
+ ret = AdvExeScsiQueue(adv_dvc, adv_reqp);
err_code = adv_dvc->err_code;
}
@@ -8849,6 +8858,7 @@ static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
ASC_DBG(1, "ExeScsiQueue() ASC_NOERROR\n");
break;
case ASC_BUSY:
+ ASC_DBG(1, "ExeScsiQueue() ASC_BUSY\n");
ASC_STATS(scp->device->host, exe_busy);
break;
case ASC_ERROR:
@@ -11149,8 +11159,6 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
{
struct asc_board *board = shost_priv(shost);
struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var;
- int req_cnt = 0;
- adv_req_t *reqp = NULL;
int sg_cnt = 0;
adv_sgblk_t *sgp;
int warn_code, err_code;
@@ -11171,20 +11179,19 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
* board. The total size is about 16 KB, so allocate all at once.
* If the allocation fails decrement and try again.
*/
- for (req_cnt = adv_dvc->max_host_qng; req_cnt > 0; req_cnt--) {
- reqp = kzalloc(sizeof(adv_req_t) * req_cnt, GFP_KERNEL);
-
- ASC_DBG(1, "reqp 0x%p, req_cnt %d, bytes %lu\n", reqp, req_cnt,
- (ulong)sizeof(adv_req_t) * req_cnt);
-
- if (reqp)
- break;
+ board->adv_reqp_size = adv_dvc->max_host_qng * sizeof(adv_req_t);
+ if (board->adv_reqp_size & 0x1f) {
+ ASC_DBG(1, "unaligned reqp %lu bytes\n", sizeof(adv_req_t));
+ board->adv_reqp_size = ADV_32BALIGN(board->adv_reqp_size);
}
+ board->adv_reqp = dma_alloc_coherent(board->dev, board->adv_reqp_size,
+ &board->adv_reqp_addr, GFP_KERNEL);
- if (!reqp)
+ if (!board->adv_reqp)
goto kmalloc_failed;
- board->adv_reqp = reqp;
+ ASC_DBG(1, "reqp 0x%p, req_cnt %d, bytes %lu\n", board->adv_reqp,
+ adv_dvc->max_host_qng, board->adv_reqp_size);
/*
* Allocate up to ADV_TOT_SG_BLOCK request structures for
@@ -11208,16 +11215,6 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
if (!board->adv_sgblkp)
goto kmalloc_failed;
- /*
- * Point 'adv_reqp' to the request structures and
- * link them together.
- */
- req_cnt--;
- reqp[req_cnt].next_reqp = NULL;
- for (; req_cnt > 0; req_cnt--) {
- reqp[req_cnt - 1].next_reqp = &reqp[req_cnt];
- }
-
if (adv_dvc->chip_type == ADV_CHIP_ASC3550) {
ASC_DBG(2, "AdvInitAsc3550Driver()\n");
warn_code = AdvInitAsc3550Driver(adv_dvc);
@@ -11253,8 +11250,11 @@ static void advansys_wide_free_mem(struct asc_board *board)
adv_dvc->carrier, adv_dvc->carrier_addr);
adv_dvc->carrier = NULL;
}
- kfree(board->adv_reqp);
- board->adv_reqp = NULL;
+ if (board->adv_reqp) {
+ dma_free_coherent(board->dev, board->adv_reqp_size,
+ board->adv_reqp, board->adv_reqp_addr);
+ board->adv_reqp = NULL;
+ }
while (board->adv_sgblkp) {
adv_sgblk_t *sgp = board->adv_sgblkp;
board->adv_sgblkp = sgp->next_sgblkp;
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 06/22] advansys: Use dma_pool for sg elements
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (4 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 05/22] advansys: Use DMA-API for mapping request blocks Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 07/22] advansys: use 'bool' instead of 'int' Hannes Reinecke
` (15 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
The sg elements should be allocated from a dma pool.
And rename the structure to 'adv_sg_block' as they
are only used by the wide board.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 108 ++++++++++++++++++++----------------------------
1 file changed, 45 insertions(+), 63 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 03a3829..b4a7a67 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -1815,15 +1815,15 @@ typedef struct adv_dvc_cfg {
struct adv_dvc_var;
struct adv_scsi_req_q;
-typedef struct asc_sg_block {
+typedef struct adv_sg_block {
uchar reserved1;
uchar reserved2;
uchar reserved3;
uchar sg_cnt; /* Valid entries in block. */
- ADV_PADDR sg_ptr; /* Pointer to next sg block. */
+ __le32 sg_ptr; /* Pointer to next sg block. */
struct {
- ADV_PADDR sg_addr; /* SG element address. */
- ADV_DCNT sg_count; /* SG element count. */
+ __le32 sg_addr; /* SG element address. */
+ __le32 sg_count; /* SG element count. */
} sg_list[NO_OF_SG_PER_BLOCK];
} ADV_SG_BLOCK;
@@ -1888,7 +1888,7 @@ typedef struct adv_scsi_req_q {
*/
typedef struct adv_sgblk {
ADV_SG_BLOCK sg_block; /* Sgblock structure. */
- uchar align[32]; /* Sgblock structure padding. */
+ dma_addr_t sg_addr; /* Physical address */
struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */
} adv_sgblk_t;
@@ -2381,7 +2381,7 @@ struct asc_board {
adv_req_t *adv_reqp; /* Request structures. */
dma_addr_t adv_reqp_addr;
size_t adv_reqp_size;
- adv_sgblk_t *adv_sgblkp; /* Scatter-gather structures. */
+ struct dma_pool *adv_sgblk_pool; /* Scatter-gather structures. */
ushort bios_signature; /* BIOS Signature. */
ushort bios_version; /* BIOS Version. */
ushort bios_codeseg; /* BIOS Code Segment. */
@@ -2650,7 +2650,7 @@ static void asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b)
{
int i;
- printk(" ASC_SG_BLOCK at addr 0x%lx (sgblockno %d)\n",
+ printk(" ADV_SG_BLOCK at addr 0x%lx (sgblockno %d)\n",
(ulong)b, sgblockno);
printk(" sg_cnt %u, sg_ptr 0x%lx\n",
b->sg_cnt, (ulong)le32_to_cpu(b->sg_ptr));
@@ -2672,7 +2672,8 @@ static void asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b)
static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
{
int sg_blk_cnt;
- struct asc_sg_block *sg_ptr;
+ struct adv_sg_block *sg_ptr;
+ adv_sgblk_t *sgblkp;
printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q);
@@ -2699,21 +2700,15 @@ static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
/* Display the request's ADV_SG_BLOCK structures. */
if (q->sg_list_ptr != NULL) {
+ sgblkp = container_of(q->sg_list_ptr, adv_sgblk_t, sg_block);
sg_blk_cnt = 0;
- while (1) {
- /*
- * 'sg_ptr' is a physical address. Convert it to a virtual
- * address by indexing 'sg_blk_cnt' into the virtual address
- * array 'sg_list_ptr'.
- *
- * XXX - Assumes all SG physical blocks are virtually contiguous.
- */
- sg_ptr =
- &(((ADV_SG_BLOCK *)(q->sg_list_ptr))[sg_blk_cnt]);
+ while (sgblkp) {
+ sg_ptr = &sgblkp->sg_block;
asc_prt_adv_sgblock(sg_blk_cnt, sg_ptr);
if (sg_ptr->sg_ptr == 0) {
break;
}
+ sgblkp = sgblkp->next_sgblkp;
sg_blk_cnt++;
}
}
@@ -6207,9 +6202,8 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
/* Remove 'sgblkp' from the request list. */
reqp->sgblkp = sgblkp->next_sgblkp;
- /* Add 'sgblkp' to the board free list. */
- sgblkp->next_sgblkp = boardp->adv_sgblkp;
- boardp->adv_sgblkp = sgblkp;
+ dma_pool_free(boardp->adv_sgblk_pool, sgblkp,
+ sgblkp->sg_addr);
}
ASC_DBG(1, "done\n");
@@ -7903,15 +7897,16 @@ static int
adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
ADV_SCSI_REQ_Q *scsiqp, struct scsi_cmnd *scp, int use_sg)
{
- adv_sgblk_t *sgblkp;
+ adv_sgblk_t *sgblkp, *prev_sgblkp;
struct scatterlist *slp;
int sg_elem_cnt;
ADV_SG_BLOCK *sg_block, *prev_sg_block;
- ADV_PADDR sg_block_paddr;
+ dma_addr_t sgblk_paddr;
int i;
slp = scsi_sglist(scp);
sg_elem_cnt = use_sg;
+ prev_sgblkp = NULL;
prev_sg_block = NULL;
reqp->sgblkp = NULL;
@@ -7921,7 +7916,9 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
* list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK
* (15) scatter-gather elements.
*/
- if ((sgblkp = boardp->adv_sgblkp) == NULL) {
+ sgblkp = dma_pool_alloc(boardp->adv_sgblk_pool, GFP_ATOMIC,
+ &sgblk_paddr);
+ if (!sgblkp) {
ASC_DBG(1, "no free adv_sgblk_t\n");
ASC_STATS(scp->device->host, adv_build_nosg);
@@ -7932,24 +7929,16 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
while ((sgblkp = reqp->sgblkp) != NULL) {
/* Remove 'sgblkp' from the request list. */
reqp->sgblkp = sgblkp->next_sgblkp;
-
- /* Add 'sgblkp' to the board free list. */
- sgblkp->next_sgblkp = boardp->adv_sgblkp;
- boardp->adv_sgblkp = sgblkp;
+ sgblkp->next_sgblkp = NULL;
+ dma_pool_free(boardp->adv_sgblk_pool, sgblkp,
+ sgblkp->sg_addr);
}
return ASC_BUSY;
}
-
/* Complete 'adv_sgblk_t' board allocation. */
- boardp->adv_sgblkp = sgblkp->next_sgblkp;
+ sgblkp->sg_addr = sgblk_paddr;
sgblkp->next_sgblkp = NULL;
-
- /*
- * Get 8 byte aligned virtual and physical addresses
- * for the allocated ADV_SG_BLOCK structure.
- */
- sg_block = (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block);
- sg_block_paddr = virt_to_bus(sg_block);
+ sg_block = &sgblkp->sg_block;
/*
* Check if this is the first 'adv_sgblk_t' for the
@@ -7964,17 +7953,16 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
* address pointers.
*/
scsiqp->sg_list_ptr = sg_block;
- scsiqp->sg_real_addr = cpu_to_le32(sg_block_paddr);
+ scsiqp->sg_real_addr = cpu_to_le32(sgblk_paddr);
} else {
/* Request's second or later scatter-gather block. */
- sgblkp->next_sgblkp = reqp->sgblkp;
- reqp->sgblkp = sgblkp;
+ prev_sgblkp->next_sgblkp = sgblkp;
/*
* Point the previous ADV_SG_BLOCK structure to
* the newly allocated ADV_SG_BLOCK structure.
*/
- prev_sg_block->sg_ptr = cpu_to_le32(sg_block_paddr);
+ prev_sg_block->sg_ptr = cpu_to_le32(sgblk_paddr);
}
for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) {
@@ -7985,15 +7973,19 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
ASC_STATS_ADD(scp->device->host, xfer_sect,
DIV_ROUND_UP(sg_dma_len(slp), 512));
- if (--sg_elem_cnt == 0) { /* Last ADV_SG_BLOCK and scatter-gather entry. */
+ if (--sg_elem_cnt == 0) {
+ /*
+ * Last ADV_SG_BLOCK and scatter-gather entry.
+ */
sg_block->sg_cnt = i + 1;
- sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */
+ sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */
return ADV_SUCCESS;
}
slp++;
}
sg_block->sg_cnt = NO_OF_SG_PER_BLOCK;
prev_sg_block = sg_block;
+ prev_sgblkp = sgblkp;
}
}
@@ -11159,8 +11151,7 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
{
struct asc_board *board = shost_priv(shost);
struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var;
- int sg_cnt = 0;
- adv_sgblk_t *sgp;
+ size_t sgblk_pool_size;
int warn_code, err_code;
/*
@@ -11197,22 +11188,14 @@ static int advansys_wide_init_chip(struct Scsi_Host *shost)
* Allocate up to ADV_TOT_SG_BLOCK request structures for
* the Wide board. Each structure is about 136 bytes.
*/
- board->adv_sgblkp = NULL;
- for (sg_cnt = 0; sg_cnt < ADV_TOT_SG_BLOCK; sg_cnt++) {
- sgp = kmalloc(sizeof(adv_sgblk_t), GFP_KERNEL);
-
- if (!sgp)
- break;
-
- sgp->next_sgblkp = board->adv_sgblkp;
- board->adv_sgblkp = sgp;
-
- }
+ sgblk_pool_size = sizeof(adv_sgblk_t) * ADV_TOT_SG_BLOCK;
+ board->adv_sgblk_pool = dma_pool_create("adv_sgblk", board->dev,
+ sgblk_pool_size, 32, 0);
- ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", sg_cnt, sizeof(adv_sgblk_t),
- sizeof(adv_sgblk_t) * sg_cnt);
+ ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", ADV_TOT_SG_BLOCK,
+ sizeof(adv_sgblk_t), sgblk_pool_size);
- if (!board->adv_sgblkp)
+ if (!board->adv_sgblk_pool)
goto kmalloc_failed;
if (adv_dvc->chip_type == ADV_CHIP_ASC3550) {
@@ -11255,10 +11238,9 @@ static void advansys_wide_free_mem(struct asc_board *board)
board->adv_reqp, board->adv_reqp_addr);
board->adv_reqp = NULL;
}
- while (board->adv_sgblkp) {
- adv_sgblk_t *sgp = board->adv_sgblkp;
- board->adv_sgblkp = sgp->next_sgblkp;
- kfree(sgp);
+ if (board->adv_sgblk_pool) {
+ dma_pool_destroy(board->adv_sgblk_pool);
+ board->adv_sgblk_pool = NULL;
}
}
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 07/22] advansys: use 'bool' instead of 'int'
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (5 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 06/22] advansys: Use dma_pool for sg elements Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 08/22] advansys: use standard data types Hannes Reinecke
` (14 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index b4a7a67..52e2afd 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -3801,17 +3801,17 @@ static int AscStopChip(PortAddr iop_base)
return (1);
}
-static int AscIsChipHalted(PortAddr iop_base)
+static bool AscIsChipHalted(PortAddr iop_base)
{
if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) {
if ((AscGetChipControl(iop_base) & CC_HALT) != 0) {
- return (1);
+ return true;
}
}
- return (0);
+ return false;
}
-static int AscResetChipAndScsiBus(ASC_DVC_VAR *asc_dvc)
+static bool AscResetChipAndScsiBus(ASC_DVC_VAR *asc_dvc)
{
PortAddr iop_base;
int i = 10;
@@ -6446,11 +6446,11 @@ AscCalSDTRData(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar syn_offset)
return byte;
}
-static int AscSetChipSynRegAtID(PortAddr iop_base, uchar id, uchar sdtr_data)
+static bool AscSetChipSynRegAtID(PortAddr iop_base, uchar id, uchar sdtr_data)
{
ASC_SCSI_BIT_ID_TYPE org_id;
int i;
- int sta = TRUE;
+ bool sta = true;
AscSetBank(iop_base, 1);
org_id = AscReadChipDvcID(iop_base);
@@ -6464,10 +6464,10 @@ static int AscSetChipSynRegAtID(PortAddr iop_base, uchar id, uchar sdtr_data)
AscSetBank(iop_base, 0);
AscSetChipSyn(iop_base, sdtr_data);
if (AscGetChipSyn(iop_base) != sdtr_data) {
- sta = FALSE;
+ sta = false;
}
} else {
- sta = FALSE;
+ sta = false;
}
AscSetBank(iop_base, 1);
AscWriteChipDvcID(iop_base, org_id);
@@ -7527,32 +7527,32 @@ static irqreturn_t advansys_interrupt(int irq, void *dev_id)
return result;
}
-static int AscHostReqRiscHalt(PortAddr iop_base)
+static bool AscHostReqRiscHalt(PortAddr iop_base)
{
int count = 0;
- int sta = 0;
+ bool sta = false;
uchar saved_stop_code;
if (AscIsChipHalted(iop_base))
- return (1);
+ return true;
saved_stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B);
AscWriteLramByte(iop_base, ASCV_STOP_CODE_B,
ASC_STOP_HOST_REQ_RISC_HALT | ASC_STOP_REQ_RISC_STOP);
do {
if (AscIsChipHalted(iop_base)) {
- sta = 1;
+ sta = true;
break;
}
mdelay(100);
} while (count++ < 20);
AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, saved_stop_code);
- return (sta);
+ return sta;
}
-static int
+static bool
AscSetRunChipSynRegAtID(PortAddr iop_base, uchar tid_no, uchar sdtr_data)
{
- int sta = FALSE;
+ bool sta = false;
if (AscHostReqRiscHalt(iop_base)) {
sta = AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data);
@@ -9449,7 +9449,7 @@ static ushort AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
AscResetChipAndScsiBus(asc_dvc);
mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */
}
- if (AscIsChipHalted(iop_base) == FALSE) {
+ if (!AscIsChipHalted(iop_base)) {
asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
return (warn_code);
}
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 08/22] advansys: use standard data types
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (6 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 07/22] advansys: use 'bool' instead of 'int' Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 09/22] advansys: Remove 'TRUE' and 'FALSE' definitions Hannes Reinecke
` (13 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
No point in defining our own.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 172 +++++++++++++++++++-----------------------------
1 file changed, 66 insertions(+), 106 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 52e2afd..bf97af3 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -76,20 +76,6 @@
/* Enable driver tracing. */
#undef ADVANSYS_DEBUG
-/*
- * Portable Data Types
- *
- * Any instance where a 32-bit long or pointer type is assumed
- * for precision or HW defined structures, the following define
- * types must be used. In Linux the char, short, and int types
- * are all consistent at 8, 16, and 32 bits respectively. Pointers
- * and long types are 64 bits on Alpha and UltraSPARC.
- */
-#define ASC_PADDR __u32 /* Physical/Bus address data type. */
-#define ASC_VADDR __u32 /* Virtual address data type. */
-#define ASC_DCNT __u32 /* Unsigned Data count type. */
-#define ASC_SDCNT __s32 /* Signed Data count type. */
-
typedef unsigned char uchar;
#ifndef TRUE
@@ -307,9 +293,9 @@ typedef struct asc_scsiq_1 {
uchar sg_queue_cnt;
uchar target_id;
uchar target_lun;
- ASC_PADDR data_addr;
- ASC_DCNT data_cnt;
- ASC_PADDR sense_addr;
+ __le32 data_addr;
+ __le32 data_cnt;
+ __le32 sense_addr;
uchar sense_len;
uchar extra_bytes;
} ASC_SCSIQ_1;
@@ -338,8 +324,8 @@ typedef struct asc_scsiq_4 {
uchar y_res;
ushort x_req_count;
ushort x_reconnect_rtn;
- ASC_PADDR x_saved_data_addr;
- ASC_DCNT x_saved_data_cnt;
+ __le32 x_saved_data_addr;
+ __le32 x_saved_data_cnt;
} ASC_SCSIQ_4;
typedef struct asc_q_done_info {
@@ -351,12 +337,12 @@ typedef struct asc_q_done_info {
uchar sense_len;
uchar extra_bytes;
uchar res;
- ASC_DCNT remain_bytes;
+ u32 remain_bytes;
} ASC_QDONE_INFO;
typedef struct asc_sg_list {
- ASC_PADDR addr;
- ASC_DCNT bytes;
+ __le32 addr;
+ __le32 bytes;
} ASC_SG_LIST;
typedef struct asc_sg_head {
@@ -586,13 +572,13 @@ typedef struct asc_dvc_var {
char redo_scam;
ushort res2;
uchar dos_int13_table[ASC_MAX_TID + 1];
- ASC_DCNT max_dma_count;
+ unsigned int max_dma_count;
ASC_SCSI_BIT_ID_TYPE no_scam;
ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer;
uchar min_sdtr_index;
uchar max_sdtr_index;
struct asc_board *drv_ptr;
- ASC_DCNT uc_break;
+ unsigned int uc_break;
} ASC_DVC_VAR;
typedef struct asc_dvc_inq_info {
@@ -600,8 +586,8 @@ typedef struct asc_dvc_inq_info {
} ASC_DVC_INQ_INFO;
typedef struct asc_cap_info {
- ASC_DCNT lba;
- ASC_DCNT blk_size;
+ u32 lba;
+ u32 blk_size;
} ASC_CAP_INFO;
typedef struct asc_cap_info_array {
@@ -928,20 +914,6 @@ typedef struct asc_mc_saved {
#define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data)
/*
- * Portable Data Types
- *
- * Any instance where a 32-bit long or pointer type is assumed
- * for precision or HW defined structures, the following define
- * types must be used. In Linux the char, short, and int types
- * are all consistent at 8, 16, and 32 bits respectively. Pointers
- * and long types are 64 bits on Alpha and UltraSPARC.
- */
-#define ADV_PADDR __u32 /* Physical address data type. */
-#define ADV_VADDR __u32 /* Virtual address data type. */
-#define ADV_DCNT __u32 /* Unsigned Data count type. */
-#define ADV_SDCNT __s32 /* Signed Data count type. */
-
-/*
* These macros are used to convert a virtual address to a
* 32-bit value. This currently can be used on Linux Alpha
* which uses 64-bit virtual address but a 32-bit bus address.
@@ -949,7 +921,6 @@ typedef struct asc_mc_saved {
* will give us time to change the HW and FW to handle 64-bit
* addresses.
*/
-#define ADV_VADDR_TO_U32 virt_to_bus
#define ADV_U32_TO_VADDR bus_to_virt
#define AdvPortAddr void __iomem * /* Virtual memory address size */
@@ -1843,8 +1814,8 @@ typedef struct adv_scsi_req_q {
uchar target_cmd;
uchar target_id; /* Device target identifier. */
uchar target_lun; /* Device target logical unit number. */
- ADV_PADDR data_addr; /* Data buffer physical address. */
- ADV_DCNT data_cnt; /* Data count. Ucode sets to residual. */
+ __le32 data_addr; /* Data buffer physical address. */
+ __le32 data_cnt; /* Data count. Ucode sets to residual. */
__le32 sense_addr;
__le32 carr_pa;
uchar mflag;
@@ -1856,7 +1827,7 @@ typedef struct adv_scsi_req_q {
uchar host_status; /* Ucode host status. */
uchar sg_working_ix;
uchar cdb[12]; /* SCSI CDB bytes 0-11. */
- ADV_PADDR sg_real_addr; /* SG list physical address. */
+ __le32 sg_real_addr; /* SG list physical address. */
__le32 scsiq_rptr;
uchar cdb16[4]; /* SCSI CDB bytes 12-15. */
__le32 scsiq_ptr;
@@ -2151,8 +2122,6 @@ do { \
#define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */
/* Return the address that is aligned at the next doubleword >= to 'addr'. */
-#define ADV_8BALIGN(addr) (((ulong) (addr) + 0x7) & ~0x7)
-#define ADV_16BALIGN(addr) (((ulong) (addr) + 0xF) & ~0xF)
#define ADV_32BALIGN(addr) (((ulong) (addr) + 0x1F) & ~0x1F)
/*
@@ -2313,24 +2282,24 @@ do { \
/* Per board statistics structure */
struct asc_stats {
/* Driver Entrypoint Statistics */
- ADV_DCNT queuecommand; /* # calls to advansys_queuecommand() */
- ADV_DCNT reset; /* # calls to advansys_eh_bus_reset() */
- ADV_DCNT biosparam; /* # calls to advansys_biosparam() */
- ADV_DCNT interrupt; /* # advansys_interrupt() calls */
- ADV_DCNT callback; /* # calls to asc/adv_isr_callback() */
- ADV_DCNT done; /* # calls to request's scsi_done function */
- ADV_DCNT build_error; /* # asc/adv_build_req() ASC_ERROR returns. */
- ADV_DCNT adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */
- ADV_DCNT adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */
+ unsigned int queuecommand; /* # calls to advansys_queuecommand() */
+ unsigned int reset; /* # calls to advansys_eh_bus_reset() */
+ unsigned int biosparam; /* # calls to advansys_biosparam() */
+ unsigned int interrupt; /* # advansys_interrupt() calls */
+ unsigned int callback; /* # calls to asc/adv_isr_callback() */
+ unsigned int done; /* # calls to request's scsi_done function */
+ unsigned int build_error; /* # asc/adv_build_req() ASC_ERROR returns. */
+ unsigned int adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */
+ unsigned int adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */
/* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */
- ADV_DCNT exe_noerror; /* # ASC_NOERROR returns. */
- ADV_DCNT exe_busy; /* # ASC_BUSY returns. */
- ADV_DCNT exe_error; /* # ASC_ERROR returns. */
- ADV_DCNT exe_unknown; /* # unknown returns. */
+ unsigned int exe_noerror; /* # ASC_NOERROR returns. */
+ unsigned int exe_busy; /* # ASC_BUSY returns. */
+ unsigned int exe_error; /* # ASC_ERROR returns. */
+ unsigned int exe_unknown; /* # unknown returns. */
/* Data Transfer Statistics */
- ADV_DCNT xfer_cnt; /* # I/O requests received */
- ADV_DCNT xfer_elem; /* # scatter-gather elements */
- ADV_DCNT xfer_sect; /* # 512-byte blocks */
+ unsigned int xfer_cnt; /* # I/O requests received */
+ unsigned int xfer_elem; /* # scatter-gather elements */
+ unsigned int xfer_sect; /* # 512-byte blocks */
};
#endif /* ADVANSYS_STATS */
@@ -3895,15 +3864,15 @@ static ushort AscReadLramWord(PortAddr iop_base, ushort addr)
}
#if CC_VERY_LONG_SG_LIST
-static ASC_DCNT AscReadLramDWord(PortAddr iop_base, ushort addr)
+static u32 AscReadLramDWord(PortAddr iop_base, ushort addr)
{
ushort val_low, val_high;
- ASC_DCNT dword_data;
+ u32 dword_data;
AscSetChipLramAddr(iop_base, addr);
val_low = AscGetChipLramData(iop_base);
val_high = AscGetChipLramData(iop_base);
- dword_data = ((ASC_DCNT) val_high << 16) | (ASC_DCNT) val_low;
+ dword_data = ((u32) val_high << 16) | (u32) val_low;
return (dword_data);
}
#endif /* CC_VERY_LONG_SG_LIST */
@@ -4009,12 +3978,11 @@ AscMemWordCopyPtrFromLram(PortAddr iop_base,
}
}
-static ASC_DCNT AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words)
+static u32 AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words)
{
- ASC_DCNT sum;
+ u32 sum = 0;
int i;
- sum = 0L;
for (i = 0; i < words; i++, s_addr += 2) {
sum += AscReadLramWord(iop_base, s_addr);
}
@@ -4071,11 +4039,11 @@ static ushort AscInitLram(ASC_DVC_VAR *asc_dvc)
return warn_code;
}
-static ASC_DCNT
+static u32
AscLoadMicroCode(PortAddr iop_base, ushort s_addr,
const uchar *mcode_buf, ushort mcode_size)
{
- ASC_DCNT chksum;
+ u32 chksum;
ushort mcode_word_size;
ushort mcode_chksum;
@@ -4132,8 +4100,8 @@ static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
int i;
ushort warn_code;
PortAddr iop_base;
- ASC_PADDR phy_addr;
- ASC_DCNT phy_size;
+ __le32 phy_addr;
+ __le32 phy_size;
struct asc_board *board = asc_dvc_to_board(asc_dvc);
iop_base = asc_dvc->iop_base;
@@ -4277,7 +4245,7 @@ static int AdvLoadMicrocode(AdvPortAddr iop_base, const unsigned char *buf,
int size, int memsize, int chksum)
{
int i, j, end, len = 0;
- ADV_DCNT sum;
+ u32 sum;
AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0);
@@ -4407,10 +4375,9 @@ static adv_req_t * adv_get_reqp(struct adv_dvc_var *adv_dvc, u32 offset)
*/
static int
AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc,
- ushort idle_cmd, ADV_DCNT idle_cmd_parameter)
+ ushort idle_cmd, u32 idle_cmd_parameter)
{
- int result;
- ADV_DCNT i, j;
+ int result, i, j;
AdvPortAddr iop_base;
iop_base = asc_dvc->iop_base;
@@ -6068,7 +6035,7 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
adv_req_t *reqp;
adv_sgblk_t *sgblkp;
struct scsi_cmnd *scp;
- ADV_DCNT resid_cnt;
+ u32 resid_cnt;
dma_addr_t sense_addr;
ASC_DBG(1, "adv_dvc_varp 0x%p, scsiqp 0x%p\n",
@@ -6234,7 +6201,7 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
uchar int_stat;
ushort target_bit;
ADV_CARR_T *free_carrp;
- ADV_VADDR irq_next_vpa;
+ __le32 irq_next_vpa;
ADV_SCSI_REQ_Q *scsiq;
adv_req_t *reqp;
@@ -6968,7 +6935,7 @@ DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words)
static uchar
_AscCopyLramScsiDoneQ(PortAddr iop_base,
ushort q_addr,
- ASC_QDONE_INFO *scsiq, ASC_DCNT max_dma_count)
+ ASC_QDONE_INFO *scsiq, unsigned int max_dma_count)
{
ushort _val;
uchar sg_queue_cnt;
@@ -6995,10 +6962,10 @@ _AscCopyLramScsiDoneQ(PortAddr iop_base,
/*
* Read high word of remain bytes from alternate location.
*/
- scsiq->remain_bytes = (((ADV_DCNT)AscReadLramWord(iop_base,
- (ushort)(q_addr +
- (ushort)
- ASC_SCSIQ_W_ALT_DC1)))
+ scsiq->remain_bytes = (((u32)AscReadLramWord(iop_base,
+ (ushort)(q_addr +
+ (ushort)
+ ASC_SCSIQ_W_ALT_DC1)))
<< 16);
/*
* Read low word of remain bytes from original location.
@@ -7224,8 +7191,7 @@ static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
} else if (scsiq->q_status == QS_DONE) {
false_overrun = FALSE;
if (scsiq->extra_bytes != 0) {
- scsiq->remain_bytes +=
- (ADV_DCNT)scsiq->extra_bytes;
+ scsiq->remain_bytes += scsiq->extra_bytes;
}
if (scsiq->d3.done_stat == QD_WITH_ERROR) {
if (scsiq->d3.host_stat ==
@@ -8267,8 +8233,8 @@ AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
int i;
ASC_SG_HEAD *sg_head;
ASC_SG_LIST_Q scsi_sg_q;
- ASC_DCNT saved_data_addr;
- ASC_DCNT saved_data_cnt;
+ __le32 saved_data_addr;
+ __le32 saved_data_cnt;
PortAddr iop_base;
ushort sg_list_dwords;
ushort sg_index;
@@ -8280,8 +8246,8 @@ AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
sg_head = scsiq->sg_head;
saved_data_addr = scsiq->q1.data_addr;
saved_data_cnt = scsiq->q1.data_cnt;
- scsiq->q1.data_addr = (ASC_PADDR) sg_head->sg_list[0].addr;
- scsiq->q1.data_cnt = (ASC_DCNT) sg_head->sg_list[0].bytes;
+ scsiq->q1.data_addr = sg_head->sg_list[0].addr;
+ scsiq->q1.data_cnt = sg_head->sg_list[0].bytes;
#if CC_VERY_LONG_SG_LIST
/*
* If sg_head->entry_cnt is greater than ASC_MAX_SG_LIST
@@ -8461,7 +8427,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
int n_q_required;
int disable_syn_offset_one_fix;
int i;
- ASC_PADDR addr;
+ u32 addr;
ushort sg_entry_cnt = 0;
ushort sg_entry_cnt_minus_one = 0;
uchar target_ix;
@@ -8471,7 +8437,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
uchar scsi_cmd;
uchar disable_cmd;
ASC_SG_HEAD *sg_head;
- ASC_DCNT data_cnt;
+ unsigned long data_cnt;
iop_base = asc_dvc->iop_base;
sg_head = scsiq->sg_head;
@@ -8517,10 +8483,8 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
}
#endif /* !CC_VERY_LONG_SG_LIST */
if (sg_entry_cnt == 1) {
- scsiq->q1.data_addr =
- (ADV_PADDR)sg_head->sg_list[0].addr;
- scsiq->q1.data_cnt =
- (ADV_DCNT)sg_head->sg_list[0].bytes;
+ scsiq->q1.data_addr = sg_head->sg_list[0].addr;
+ scsiq->q1.data_cnt = sg_head->sg_list[0].bytes;
scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE);
}
sg_entry_cnt_minus_one = sg_entry_cnt - 1;
@@ -8532,9 +8496,8 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
if (scsiq->q1.cntl & QC_SG_HEAD) {
data_cnt = 0;
for (i = 0; i < sg_entry_cnt; i++) {
- data_cnt +=
- (ADV_DCNT)le32_to_cpu(sg_head->sg_list[i].
- bytes);
+ data_cnt += le32_to_cpu(sg_head->sg_list[i].
+ bytes);
}
} else {
data_cnt = le32_to_cpu(scsiq->q1.data_cnt);
@@ -8571,12 +8534,11 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) {
if ((scsi_cmd == READ_6) ||
(scsi_cmd == READ_10)) {
- addr =
- (ADV_PADDR)le32_to_cpu(sg_head->
+ addr = le32_to_cpu(sg_head->
sg_list
[sg_entry_cnt_minus_one].
addr) +
- (ADV_DCNT)le32_to_cpu(sg_head->
+ le32_to_cpu(sg_head->
sg_list
[sg_entry_cnt_minus_one].
bytes);
@@ -8597,8 +8559,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
sg_list
[sg_entry_cnt_minus_one].
bytes);
- data_cnt -=
- (ASC_DCNT) extra_bytes;
+ data_cnt -= extra_bytes;
sg_head->
sg_list
[sg_entry_cnt_minus_one].
@@ -8653,8 +8614,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
== 0) {
scsiq->q2.tag_code |=
ASC_TAG_FLAG_EXTRA_BYTES;
- data_cnt -= (ASC_DCNT)
- extra_bytes;
+ data_cnt -= extra_bytes;
scsiq->q1.data_cnt =
cpu_to_le32
(data_cnt);
@@ -9017,7 +8977,7 @@ static int AscStopQueueExe(PortAddr iop_base)
return (0);
}
-static ASC_DCNT AscGetMaxDmaCount(ushort bus_type)
+static unsigned int AscGetMaxDmaCount(ushort bus_type)
{
if (bus_type & ASC_IS_ISA)
return ASC_MAX_ISA_DMA_COUNT;
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 09/22] advansys: Remove 'TRUE' and 'FALSE' definitions
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (7 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 08/22] advansys: use standard data types Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 10/22] advansys: remove 'ERR' definition Hannes Reinecke
` (12 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Use 'bool' type instead.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 79 ++++++++++++++++++++++++-------------------------
1 file changed, 38 insertions(+), 41 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index bf97af3..9482d4e 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -78,13 +78,6 @@
typedef unsigned char uchar;
-#ifndef TRUE
-#define TRUE (1)
-#endif
-#ifndef FALSE
-#define FALSE (0)
-#endif
-
#define ERR (-1)
#define UW_ERR (uint)(0xFFFF)
#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0)
@@ -556,7 +549,7 @@ typedef struct asc_dvc_var {
dma_addr_t overrun_dma;
uchar scsi_reset_wait;
uchar chip_no;
- char is_in_int;
+ bool is_in_int;
uchar max_total_qng;
uchar cur_total_qng;
uchar in_critical_cnt;
@@ -3754,7 +3747,7 @@ static int AscStartChip(PortAddr iop_base)
return (1);
}
-static int AscStopChip(PortAddr iop_base)
+static bool AscStopChip(PortAddr iop_base)
{
uchar cc_val;
@@ -3765,9 +3758,9 @@ static int AscStopChip(PortAddr iop_base)
AscSetChipIH(iop_base, INS_HALT);
AscSetChipIH(iop_base, INS_RFLAG_WTM);
if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) {
- return (0);
+ return false;
}
- return (1);
+ return true;
}
static bool AscIsChipHalted(PortAddr iop_base)
@@ -6453,7 +6446,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
EXT_MSG ext_msg;
EXT_MSG out_msg;
ushort halt_q_addr;
- int sdtr_accept;
+ bool sdtr_accept;
ushort int_halt_code;
ASC_SCSI_BIT_ID_TYPE scsi_busy;
ASC_SCSI_BIT_ID_TYPE target_id;
@@ -6512,10 +6505,10 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
if (ext_msg.msg_type == EXTENDED_MESSAGE &&
ext_msg.msg_req == EXTENDED_SDTR &&
ext_msg.msg_len == MS_SDTR_LEN) {
- sdtr_accept = TRUE;
+ sdtr_accept = true;
if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) {
- sdtr_accept = FALSE;
+ sdtr_accept = false;
ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET;
}
if ((ext_msg.xfer_period <
@@ -6523,7 +6516,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
|| (ext_msg.xfer_period >
asc_dvc->sdtr_period_tbl[asc_dvc->
max_sdtr_index])) {
- sdtr_accept = FALSE;
+ sdtr_accept = false;
ext_msg.xfer_period =
asc_dvc->sdtr_period_tbl[asc_dvc->
min_sdtr_index];
@@ -7111,7 +7104,7 @@ static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
uchar cur_target_qng;
ASC_QDONE_INFO scsiq_buf;
ASC_QDONE_INFO *scsiq;
- int false_overrun;
+ bool false_overrun;
iop_base = asc_dvc->iop_base;
n_q_used = 1;
@@ -7189,7 +7182,11 @@ static int AscIsrQDone(ASC_DVC_VAR *asc_dvc)
((scsiq->q_status & QS_ABORTED) != 0)) {
return (0x11);
} else if (scsiq->q_status == QS_DONE) {
- false_overrun = FALSE;
+ /*
+ * This is also curious.
+ * false_overrun will _always_ be set to 'false'
+ */
+ false_overrun = false;
if (scsiq->extra_bytes != 0) {
scsiq->remain_bytes += scsiq->extra_bytes;
}
@@ -7262,23 +7259,23 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
uchar host_flag;
iop_base = asc_dvc->iop_base;
- int_pending = FALSE;
+ int_pending = ASC_FALSE;
if (AscIsIntPending(iop_base) == 0)
return int_pending;
if ((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0) {
- return ERR;
+ return ASC_ERROR;
}
if (asc_dvc->in_critical_cnt != 0) {
AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL);
- return ERR;
+ return ASC_ERROR;
}
if (asc_dvc->is_in_int) {
AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY);
- return ERR;
+ return ASC_ERROR;
}
- asc_dvc->is_in_int = TRUE;
+ asc_dvc->is_in_int = true;
ctrl_reg = AscGetChipControl(iop_base);
saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET |
CC_SINGLE_STEP | CC_DIAG | CC_TEST));
@@ -7286,7 +7283,7 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
if (chipstat & CSW_SCSI_RESET_LATCH) {
if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) {
int i = 10;
- int_pending = TRUE;
+ int_pending = ASC_TRUE;
asc_dvc->sdtr_done = 0;
saved_ctrl_reg &= (uchar)(~CC_HALT);
while ((AscGetChipStatus(iop_base) &
@@ -7308,7 +7305,7 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
(uchar)(host_flag | (uchar)ASC_HOST_FLAG_IN_ISR));
if ((chipstat & CSW_INT_PENDING) || (int_pending)) {
AscAckInterrupt(iop_base);
- int_pending = TRUE;
+ int_pending = ASC_TRUE;
if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) {
if (AscIsrChipHalted(asc_dvc) == ERR) {
goto ISR_REPORT_QDONE_FATAL_ERROR;
@@ -7330,13 +7327,13 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
} while (status == 0x11);
}
if ((status & 0x80) != 0)
- int_pending = ERR;
+ int_pending = ASC_ERROR;
}
}
AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag);
AscSetChipLramAddr(iop_base, saved_ram_addr);
AscSetChipControl(iop_base, saved_ctrl_reg);
- asc_dvc->is_in_int = FALSE;
+ asc_dvc->is_in_int = false;
return int_pending;
}
@@ -8425,7 +8422,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
PortAddr iop_base;
int sta;
int n_q_required;
- int disable_syn_offset_one_fix;
+ bool disable_syn_offset_one_fix;
int i;
u32 addr;
ushort sg_entry_cnt = 0;
@@ -8490,7 +8487,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
sg_entry_cnt_minus_one = sg_entry_cnt - 1;
}
scsi_cmd = scsiq->cdbptr[0];
- disable_syn_offset_one_fix = FALSE;
+ disable_syn_offset_one_fix = false;
if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) &&
!(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) {
if (scsiq->q1.cntl & QC_SG_HEAD) {
@@ -8504,7 +8501,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
}
if (data_cnt != 0UL) {
if (data_cnt < 512UL) {
- disable_syn_offset_one_fix = TRUE;
+ disable_syn_offset_one_fix = true;
} else {
for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST;
i++) {
@@ -8515,7 +8512,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
}
if (scsi_cmd == disable_cmd) {
disable_syn_offset_one_fix =
- TRUE;
+ true;
break;
}
}
@@ -9060,7 +9057,7 @@ static ushort AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
/* asc_dvc->init_state initialized in AscInitGetConfig(). */
asc_dvc->sdtr_done = 0;
asc_dvc->cur_total_qng = 0;
- asc_dvc->is_in_int = 0;
+ asc_dvc->is_in_int = false;
asc_dvc->in_critical_cnt = 0;
asc_dvc->last_q_shortage = 0;
asc_dvc->use_tagged_qng = 0;
@@ -9240,7 +9237,7 @@ static int AscWriteEEPDataReg(PortAddr iop_base, ushort data_reg)
int retry;
retry = 0;
- while (TRUE) {
+ while (true) {
AscSetChipEEPData(iop_base, data_reg);
mdelay(1);
read_back = AscGetChipEEPData(iop_base);
@@ -9376,7 +9373,7 @@ static int AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf,
int n_error;
retry = 0;
- while (TRUE) {
+ while (true) {
if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf,
bus_type)) == 0) {
break;
@@ -9403,7 +9400,7 @@ static ushort AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
warn_code = 0;
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE);
AscStopQueueExe(iop_base);
- if ((AscStopChip(iop_base) == FALSE) ||
+ if ((AscStopChip(iop_base)) ||
(AscGetChipScsiCtrl(iop_base) != 0)) {
asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE;
AscResetChipAndScsiBus(asc_dvc);
@@ -11095,7 +11092,7 @@ static struct scsi_host_template advansys_template = {
* must be set. The flag will be cleared in advansys_board_found
* for non-ISA adapters.
*/
- .unchecked_isa_dma = 1,
+ .unchecked_isa_dma = true,
/*
* All adapters controlled by this driver are capable of large
* scatter-gather lists. According to the mid-level SCSI documentation
@@ -11271,28 +11268,28 @@ static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
switch (asc_dvc_varp->bus_type) {
#ifdef CONFIG_ISA
case ASC_IS_ISA:
- shost->unchecked_isa_dma = TRUE;
+ shost->unchecked_isa_dma = true;
share_irq = 0;
break;
case ASC_IS_VL:
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = 0;
break;
case ASC_IS_EISA:
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = IRQF_SHARED;
break;
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
case ASC_IS_PCI:
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = IRQF_SHARED;
break;
#endif /* CONFIG_PCI */
default:
shost_printk(KERN_ERR, shost, "unknown adapter type: "
"%d\n", asc_dvc_varp->bus_type);
- shost->unchecked_isa_dma = TRUE;
+ shost->unchecked_isa_dma = false;
share_irq = 0;
break;
}
@@ -11311,7 +11308,7 @@ static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
* For Wide boards set PCI information before calling
* AdvInitGetConfig().
*/
- shost->unchecked_isa_dma = FALSE;
+ shost->unchecked_isa_dma = false;
share_irq = IRQF_SHARED;
ASC_DBG(2, "AdvInitGetConfig()\n");
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 10/22] advansys: remove 'ERR' definition
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (8 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 09/22] advansys: Remove 'TRUE' and 'FALSE' definitions Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 11/22] advansys: Make AscIsrChipHalted() a void function Hannes Reinecke
` (11 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 9482d4e..9d78faa 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -78,7 +78,6 @@
typedef unsigned char uchar;
-#define ERR (-1)
#define UW_ERR (uint)(0xFFFF)
#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0)
@@ -7307,7 +7306,7 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
AscAckInterrupt(iop_base);
int_pending = ASC_TRUE;
if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) {
- if (AscIsrChipHalted(asc_dvc) == ERR) {
+ if (AscIsrChipHalted(asc_dvc) == ASC_ERROR) {
goto ISR_REPORT_QDONE_FATAL_ERROR;
} else {
saved_ctrl_reg &= (uchar)(~CC_HALT);
@@ -8439,7 +8438,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
iop_base = asc_dvc->iop_base;
sg_head = scsiq->sg_head;
if (asc_dvc->err_code != 0)
- return (ERR);
+ return ASC_ERROR;
scsiq->q1.q_no = 0;
if ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES) == 0) {
scsiq->q1.extra_bytes = 0;
@@ -8465,18 +8464,18 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
}
if (asc_dvc->in_critical_cnt != 0) {
AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CRITICAL_RE_ENTRY);
- return (ERR);
+ return ASC_ERROR;
}
asc_dvc->in_critical_cnt++;
if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) {
if ((sg_entry_cnt = sg_head->entry_cnt) == 0) {
asc_dvc->in_critical_cnt--;
- return (ERR);
+ return ASC_ERROR;
}
#if !CC_VERY_LONG_SG_LIST
if (sg_entry_cnt > ASC_MAX_SG_LIST) {
asc_dvc->in_critical_cnt--;
- return (ERR);
+ return ASC_ERROR;
}
#endif /* !CC_VERY_LONG_SG_LIST */
if (sg_entry_cnt == 1) {
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 11/22] advansys: Make AscIsrChipHalted() a void function
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (9 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 10/22] advansys: remove 'ERR' definition Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 12/22] advansys: cleanup function return codes Hannes Reinecke
` (10 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
AscIsrChipHalted will only ever return '0', so make it
a void function.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 30 +++++++++++++-----------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 9d78faa..54e8d89 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -6440,7 +6440,7 @@ static void AscSetChipSDTR(PortAddr iop_base, uchar sdtr_data, uchar tid_no)
AscPutMCodeSDTRDoneAtID(iop_base, tid_no, sdtr_data);
}
-static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
+static void AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
{
EXT_MSG ext_msg;
EXT_MSG out_msg;
@@ -6487,14 +6487,14 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
boardp->sdtr_data[tid_no] = 0;
}
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
} else if (int_halt_code == ASC_HALT_ENABLE_ASYN_USE_SYN_FIX) {
if (asc_dvc->pci_fix_asyn_xfer & target_id) {
AscSetChipSDTR(iop_base, asyn_sdtr, tid_no);
boardp->sdtr_data[tid_no] = asyn_sdtr;
}
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
} else if (int_halt_code == ASC_HALT_EXTMSG_IN) {
AscMemWordCopyPtrFromLram(iop_base,
ASCV_MSGIN_BEG,
@@ -6580,7 +6580,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
(ushort)ASC_SCSIQ_B_CNTL),
q_cntl);
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
} else if (ext_msg.msg_type == EXTENDED_MESSAGE &&
ext_msg.msg_req == EXTENDED_WDTR &&
ext_msg.msg_len == MS_WDTR_LEN) {
@@ -6596,7 +6596,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
(ushort)ASC_SCSIQ_B_CNTL),
q_cntl);
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
} else {
ext_msg.msg_type = MESSAGE_REJECT;
@@ -6610,7 +6610,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
(ushort)ASC_SCSIQ_B_CNTL),
q_cntl);
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
}
} else if (int_halt_code == ASC_HALT_CHK_CONDITION) {
@@ -6667,7 +6667,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
AscWriteLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B, scsi_busy);
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
} else if (int_halt_code == ASC_HALT_SDTR_REJECTED) {
AscMemWordCopyPtrFromLram(iop_base,
@@ -6689,7 +6689,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
(ushort)(halt_q_addr +
(ushort)ASC_SCSIQ_B_CNTL), q_cntl);
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
} else if (int_halt_code == ASC_HALT_SS_QUEUE_FULL) {
scsi_status = AscReadLramByte(iop_base,
@@ -6734,7 +6734,7 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
}
}
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
}
#if CC_VERY_LONG_SG_LIST
else if (int_halt_code == ASC_HALT_HOST_COPY_SG_LIST_TO_RISC) {
@@ -6890,10 +6890,10 @@ static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
* after the return.
*/
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return (0);
+ return;
}
#endif /* CC_VERY_LONG_SG_LIST */
- return (0);
+ return;
}
/*
@@ -7306,13 +7306,9 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
AscAckInterrupt(iop_base);
int_pending = ASC_TRUE;
if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) {
- if (AscIsrChipHalted(asc_dvc) == ASC_ERROR) {
- goto ISR_REPORT_QDONE_FATAL_ERROR;
- } else {
- saved_ctrl_reg &= (uchar)(~CC_HALT);
- }
+ AscIsrChipHalted(asc_dvc);
+ saved_ctrl_reg &= (uchar)(~CC_HALT);
} else {
- ISR_REPORT_QDONE_FATAL_ERROR:
if ((asc_dvc->dvc_cntl & ASC_CNTL_INT_MULTI_Q) != 0) {
while (((status =
AscIsrQDone(asc_dvc)) & 0x01) != 0) {
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 12/22] advansys: cleanup function return codes
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (10 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 11/22] advansys: Make AscIsrChipHalted() a void function Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 13/22] advansys: scsi_q1->data_addr is little endian Hannes Reinecke
` (9 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 35 +++++++++++++----------------------
1 file changed, 13 insertions(+), 22 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 54e8d89..9e09008 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -78,7 +78,6 @@
typedef unsigned char uchar;
-#define UW_ERR (uint)(0xFFFF)
#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0)
#define PCI_VENDOR_ID_ASP 0x10cd
@@ -3981,15 +3980,13 @@ static u32 AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words)
return (sum);
}
-static ushort AscInitLram(ASC_DVC_VAR *asc_dvc)
+static void AscInitLram(ASC_DVC_VAR *asc_dvc)
{
uchar i;
ushort s_addr;
PortAddr iop_base;
- ushort warn_code;
iop_base = asc_dvc->iop_base;
- warn_code = 0;
AscMemWordSetLram(iop_base, ASC_QADR_BEG, 0,
(ushort)(((int)(asc_dvc->max_total_qng + 2 + 1) *
64) >> 1));
@@ -4028,7 +4025,6 @@ static ushort AscInitLram(ASC_DVC_VAR *asc_dvc)
AscWriteLramByte(iop_base,
(ushort)(s_addr + (ushort)ASC_SCSIQ_B_QNO), i);
}
- return warn_code;
}
static u32
@@ -4087,10 +4083,10 @@ static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc)
}
}
-static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
+static int AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
{
int i;
- ushort warn_code;
+ int warn_code;
PortAddr iop_base;
__le32 phy_addr;
__le32 phy_size;
@@ -4132,12 +4128,12 @@ static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc)
AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR);
if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) {
asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR;
- warn_code = UW_ERR;
+ warn_code = -EINVAL;
goto err_mcode_start;
}
if (AscStartChip(iop_base) != 1) {
asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
- warn_code = UW_ERR;
+ warn_code = -EIO;
goto err_mcode_start;
}
@@ -4151,13 +4147,13 @@ err_dma_map:
return warn_code;
}
-static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
+static int AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
{
const struct firmware *fw;
const char fwname[] = "advansys/mcode.bin";
int err;
unsigned long chksum;
- ushort warn_code;
+ int warn_code;
PortAddr iop_base;
iop_base = asc_dvc->iop_base;
@@ -4169,15 +4165,13 @@ static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
}
asc_dvc->init_state |= ASC_INIT_STATE_BEG_LOAD_MC;
if (asc_dvc->err_code != 0)
- return UW_ERR;
+ return ASC_ERROR;
if (!AscFindSignature(asc_dvc->iop_base)) {
asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE;
return warn_code;
}
AscDisableInterrupt(iop_base);
- warn_code |= AscInitLram(asc_dvc);
- if (asc_dvc->err_code != 0)
- return UW_ERR;
+ AscInitLram(asc_dvc);
err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev);
if (err) {
@@ -9030,15 +9024,13 @@ static uchar AscSetIsaDmaSpeed(PortAddr iop_base, uchar speed_value)
}
#endif /* CONFIG_ISA */
-static ushort AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
+static void AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
{
int i;
PortAddr iop_base;
- ushort warn_code;
uchar chip_version;
iop_base = asc_dvc->iop_base;
- warn_code = 0;
asc_dvc->err_code = 0;
if ((asc_dvc->bus_type &
(ASC_IS_ISA | ASC_IS_PCI | ASC_IS_EISA | ASC_IS_VL)) == 0) {
@@ -9114,7 +9106,6 @@ static ushort AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc)
asc_dvc->scsiq_busy_tail[i] = (ASC_SCSI_Q *)0L;
asc_dvc->cfg->max_tag_qng[i] = ASC_MAX_INRAM_TAG_QNG;
}
- return warn_code;
}
static int AscWriteEEPCmdReg(PortAddr iop_base, uchar cmd_reg)
@@ -9380,7 +9371,7 @@ static int AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf,
return n_error;
}
-static ushort AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
+static int AscInitFromEEP(ASC_DVC_VAR *asc_dvc)
{
ASCEEP_CONFIG eep_config_buf;
ASCEEP_CONFIG *eep_config;
@@ -9556,8 +9547,8 @@ static int AscInitGetConfig(struct Scsi_Host *shost)
return asc_dvc->err_code;
if (AscFindSignature(asc_dvc->iop_base)) {
- warn_code |= AscInitAscDvcVar(asc_dvc);
- warn_code |= AscInitFromEEP(asc_dvc);
+ AscInitAscDvcVar(asc_dvc);
+ warn_code = AscInitFromEEP(asc_dvc);
asc_dvc->init_state |= ASC_INIT_STATE_END_GET_CFG;
if (asc_dvc->scsi_reset_wait > ASC_MAX_SCSI_RESET_WAIT)
asc_dvc->scsi_reset_wait = ASC_MAX_SCSI_RESET_WAIT;
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 13/22] advansys: scsi_q1->data_addr is little endian
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (11 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 12/22] advansys: cleanup function return codes Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 14/22] advansys: Remove ASC_SCSI_REQ_Q Hannes Reinecke
` (8 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
The 'data_addr' field is accessed by the board, and needs
to be kept in little endian format.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 9e09008..d9052f3 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -8232,8 +8232,8 @@ AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
sg_head = scsiq->sg_head;
saved_data_addr = scsiq->q1.data_addr;
saved_data_cnt = scsiq->q1.data_cnt;
- scsiq->q1.data_addr = sg_head->sg_list[0].addr;
- scsiq->q1.data_cnt = sg_head->sg_list[0].bytes;
+ scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr);
+ scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes);
#if CC_VERY_LONG_SG_LIST
/*
* If sg_head->entry_cnt is greater than ASC_MAX_SG_LIST
@@ -8469,8 +8469,8 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
}
#endif /* !CC_VERY_LONG_SG_LIST */
if (sg_entry_cnt == 1) {
- scsiq->q1.data_addr = sg_head->sg_list[0].addr;
- scsiq->q1.data_cnt = sg_head->sg_list[0].bytes;
+ scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr);
+ scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes);
scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE);
}
sg_entry_cnt_minus_one = sg_entry_cnt - 1;
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 14/22] advansys: Remove ASC_SCSI_REQ_Q
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (12 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 13/22] advansys: scsi_q1->data_addr is little endian Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 15/22] advansys: Remove CC_VERY_LONG_SG_LIST Hannes Reinecke
` (7 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Removed unused structure ASC_SCSI_REQ_Q and update the
comments to 'ADV_SCSI_REQ_Q'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 31 ++++++++++---------------------
1 file changed, 10 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index d9052f3..1731761 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -353,17 +353,6 @@ typedef struct asc_scsi_q {
ushort next_sg_index;
} ASC_SCSI_Q;
-typedef struct asc_scsi_req_q {
- ASC_SCSIQ_1 r1;
- ASC_SCSIQ_2 r2;
- uchar *cdbptr;
- ASC_SG_HEAD *sg_head;
- uchar *sense_ptr;
- ASC_SCSIQ_3 r3;
- uchar cdb[ASC_MAX_CDB_LEN];
- uchar sense[ASC_MIN_SENSE_LEN];
-} ASC_SCSI_REQ_Q;
-
typedef struct asc_scsi_bios_req_q {
ASC_SCSIQ_1 r1;
ASC_SCSIQ_2 r2;
@@ -1707,7 +1696,7 @@ typedef struct adveep_38C1600_config {
typedef struct adv_carr_t {
__le32 carr_va; /* Carrier Virtual Address */
__le32 carr_pa; /* Carrier Physical Address */
- __le32 areq_vpa; /* ASC_SCSI_REQ_Q Virtual or Physical Address */
+ __le32 areq_vpa; /* ADV_SCSI_REQ_Q Virtual or Physical Address */
/*
* next_vpa [31:4] Carrier Virtual or Physical Next Pointer
*
@@ -1738,7 +1727,7 @@ typedef struct adv_carr_t {
(ADV_CARRIER_COUNT * sizeof(ADV_CARR_T))
/*
- * ASC_SCSI_REQ_Q 'a_flag' definitions
+ * ADV_SCSI_REQ_Q 'a_flag' definitions
*
* The Adv Library should limit use to the lower nibble (4 bits) of
* a_flag. Drivers are free to use the upper nibble (4 bits) of a_flag.
@@ -2029,7 +2018,7 @@ do { \
/*
* Abort an SRB in the chip's RISC Memory. The 'srb_tag' argument must
- * match the ASC_SCSI_REQ_Q 'srb_tag' field.
+ * match the ADV_SCSI_REQ_Q 'srb_tag' field.
*
* If the request has not yet been sent to the device it will simply be
* aborted from RISC memory. If the request is disconnected it will be
@@ -2075,7 +2064,7 @@ do { \
#define ADV_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADV_MAX_TID))
/*
- * ASC_SCSI_REQ_Q 'done_status' and 'host_status' return values.
+ * ADV_SCSI_REQ_Q 'done_status' and 'host_status' return values.
*/
#define QD_NO_STATUS 0x00 /* Request not completed yet. */
@@ -6237,9 +6226,9 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
* Get a pointer to the newly completed ADV_SCSI_REQ_Q structure.
* The RISC will have set 'areq_vpa' to a virtual address.
*
- * The firmware will have copied the ASC_SCSI_REQ_Q.scsiq_ptr
+ * The firmware will have copied the ADV_SCSI_REQ_Q.scsiq_ptr
* field to the carrier ADV_CARR_T.areq_vpa field. The conversion
- * below complements the conversion of ASC_SCSI_REQ_Q.scsiq_ptr'
+ * below complements the conversion of ADV_SCSI_REQ_Q.scsiq_ptr'
* in AdvExeScsiQueue().
*/
u32 pa_offset = le32_to_cpu(asc_dvc->irq_sp->areq_vpa);
@@ -6751,9 +6740,9 @@ static void AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
q_addr = ASC_QNO_TO_QADDR(q_no);
/*
- * Convert the request's SRB pointer to a host ASC_SCSI_REQ
+ * Convert the request's SRB pointer to a host ASC_SCSI_Q
* structure pointer using a macro provided by the driver.
- * The ASC_SCSI_REQ pointer provides a pointer to the
+ * The ASC_SCSI_Q pointer provides a pointer to the
* host ASC_SG_HEAD structure.
*/
/* Read request's SRB pointer. */
@@ -7947,7 +7936,7 @@ adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp,
* If an adv_req_t can not be allocated to issue the request,
* then return ASC_BUSY. If an error occurs, then return ASC_ERROR.
*
- * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the
+ * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the
* microcode for DMA addresses or math operations are byte swapped
* to little-endian order.
*/
@@ -8635,7 +8624,7 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
* If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be
* set to SCSI_MAX_RETRY.
*
- * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the microcode
+ * Multi-byte fields in the ADV_SCSI_REQ_Q that are used by the microcode
* for DMA addresses or math operations are byte swapped to little-endian
* order.
*
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 15/22] advansys: Remove CC_VERY_LONG_SG_LIST
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (13 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 14/22] advansys: Remove ASC_SCSI_REQ_Q Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 16/22] advansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX' Hannes Reinecke
` (6 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Was uncommented in the original driver, and I'm too lazy to
figure out the conversion.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 243 +-----------------------------------------------
1 file changed, 5 insertions(+), 238 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 1731761..02a0d8d 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -88,15 +88,6 @@ typedef unsigned char uchar;
#define PCI_DEVICE_ID_38C0800_REV1 0x2500
#define PCI_DEVICE_ID_38C1600_REV1 0x2700
-/*
- * Enable CC_VERY_LONG_SG_LIST to support up to 64K element SG lists.
- * The SRB structure will have to be changed and the ASC_SRB2SCSIQ()
- * macro re-defined to be able to obtain a ASC_SCSI_Q pointer from the
- * SRB structure.
- */
-#define CC_VERY_LONG_SG_LIST 0
-#define ASC_SRB2SCSIQ(srb_ptr) (srb_ptr)
-
#define PortAddr unsigned int /* port address size */
#define inp(port) inb(port)
#define outp(port, byte) outb((byte), (port))
@@ -3843,20 +3834,6 @@ static ushort AscReadLramWord(PortAddr iop_base, ushort addr)
return (word_data);
}
-#if CC_VERY_LONG_SG_LIST
-static u32 AscReadLramDWord(PortAddr iop_base, ushort addr)
-{
- ushort val_low, val_high;
- u32 dword_data;
-
- AscSetChipLramAddr(iop_base, addr);
- val_low = AscGetChipLramData(iop_base);
- val_high = AscGetChipLramData(iop_base);
- dword_data = ((u32) val_high << 16) | (u32) val_low;
- return (dword_data);
-}
-#endif /* CC_VERY_LONG_SG_LIST */
-
static void
AscMemWordSetLram(PortAddr iop_base, ushort s_addr, ushort set_wval, int words)
{
@@ -6719,163 +6696,6 @@ static void AscIsrChipHalted(ASC_DVC_VAR *asc_dvc)
AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
return;
}
-#if CC_VERY_LONG_SG_LIST
- else if (int_halt_code == ASC_HALT_HOST_COPY_SG_LIST_TO_RISC) {
- uchar q_no;
- ushort q_addr;
- uchar sg_wk_q_no;
- uchar first_sg_wk_q_no;
- ASC_SCSI_Q *scsiq; /* Ptr to driver request. */
- ASC_SG_HEAD *sg_head; /* Ptr to driver SG request. */
- ASC_SG_LIST_Q scsi_sg_q; /* Structure written to queue. */
- ushort sg_list_dwords;
- ushort sg_entry_cnt;
- uchar next_qp;
- int i;
-
- q_no = AscReadLramByte(iop_base, (ushort)ASCV_REQ_SG_LIST_QP);
- if (q_no == ASC_QLINK_END)
- return 0;
-
- q_addr = ASC_QNO_TO_QADDR(q_no);
-
- /*
- * Convert the request's SRB pointer to a host ASC_SCSI_Q
- * structure pointer using a macro provided by the driver.
- * The ASC_SCSI_Q pointer provides a pointer to the
- * host ASC_SG_HEAD structure.
- */
- /* Read request's SRB pointer. */
- scsiq = (ASC_SCSI_Q *)
- ASC_SRB2SCSIQ(ASC_U32_TO_VADDR(AscReadLramDWord(iop_base,
- (ushort)
- (q_addr +
- ASC_SCSIQ_D_SRBPTR))));
-
- /*
- * Get request's first and working SG queue.
- */
- sg_wk_q_no = AscReadLramByte(iop_base,
- (ushort)(q_addr +
- ASC_SCSIQ_B_SG_WK_QP));
-
- first_sg_wk_q_no = AscReadLramByte(iop_base,
- (ushort)(q_addr +
- ASC_SCSIQ_B_FIRST_SG_WK_QP));
-
- /*
- * Reset request's working SG queue back to the
- * first SG queue.
- */
- AscWriteLramByte(iop_base,
- (ushort)(q_addr +
- (ushort)ASC_SCSIQ_B_SG_WK_QP),
- first_sg_wk_q_no);
-
- sg_head = scsiq->sg_head;
-
- /*
- * Set sg_entry_cnt to the number of SG elements
- * that will be completed on this interrupt.
- *
- * Note: The allocated SG queues contain ASC_MAX_SG_LIST - 1
- * SG elements. The data_cnt and data_addr fields which
- * add 1 to the SG element capacity are not used when
- * restarting SG handling after a halt.
- */
- if (scsiq->remain_sg_entry_cnt > (ASC_MAX_SG_LIST - 1)) {
- sg_entry_cnt = ASC_MAX_SG_LIST - 1;
-
- /*
- * Keep track of remaining number of SG elements that
- * will need to be handled on the next interrupt.
- */
- scsiq->remain_sg_entry_cnt -= (ASC_MAX_SG_LIST - 1);
- } else {
- sg_entry_cnt = scsiq->remain_sg_entry_cnt;
- scsiq->remain_sg_entry_cnt = 0;
- }
-
- /*
- * Copy SG elements into the list of allocated SG queues.
- *
- * Last index completed is saved in scsiq->next_sg_index.
- */
- next_qp = first_sg_wk_q_no;
- q_addr = ASC_QNO_TO_QADDR(next_qp);
- scsi_sg_q.sg_head_qp = q_no;
- scsi_sg_q.cntl = QCSG_SG_XFER_LIST;
- for (i = 0; i < sg_head->queue_cnt; i++) {
- scsi_sg_q.seq_no = i + 1;
- if (sg_entry_cnt > ASC_SG_LIST_PER_Q) {
- sg_list_dwords = (uchar)(ASC_SG_LIST_PER_Q * 2);
- sg_entry_cnt -= ASC_SG_LIST_PER_Q;
- /*
- * After very first SG queue RISC FW uses next
- * SG queue first element then checks sg_list_cnt
- * against zero and then decrements, so set
- * sg_list_cnt 1 less than number of SG elements
- * in each SG queue.
- */
- scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q - 1;
- scsi_sg_q.sg_cur_list_cnt =
- ASC_SG_LIST_PER_Q - 1;
- } else {
- /*
- * This is the last SG queue in the list of
- * allocated SG queues. If there are more
- * SG elements than will fit in the allocated
- * queues, then set the QCSG_SG_XFER_MORE flag.
- */
- if (scsiq->remain_sg_entry_cnt != 0) {
- scsi_sg_q.cntl |= QCSG_SG_XFER_MORE;
- } else {
- scsi_sg_q.cntl |= QCSG_SG_XFER_END;
- }
- /* equals sg_entry_cnt * 2 */
- sg_list_dwords = sg_entry_cnt << 1;
- scsi_sg_q.sg_list_cnt = sg_entry_cnt - 1;
- scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt - 1;
- sg_entry_cnt = 0;
- }
-
- scsi_sg_q.q_no = next_qp;
- AscMemWordCopyPtrToLram(iop_base,
- q_addr + ASC_SCSIQ_SGHD_CPY_BEG,
- (uchar *)&scsi_sg_q,
- sizeof(ASC_SG_LIST_Q) >> 1);
-
- AscMemDWordCopyPtrToLram(iop_base,
- q_addr + ASC_SGQ_LIST_BEG,
- (uchar *)&sg_head->
- sg_list[scsiq->next_sg_index],
- sg_list_dwords);
-
- scsiq->next_sg_index += ASC_SG_LIST_PER_Q;
-
- /*
- * If the just completed SG queue contained the
- * last SG element, then no more SG queues need
- * to be written.
- */
- if (scsi_sg_q.cntl & QCSG_SG_XFER_END) {
- break;
- }
-
- next_qp = AscReadLramByte(iop_base,
- (ushort)(q_addr +
- ASC_SCSIQ_B_FWD));
- q_addr = ASC_QNO_TO_QADDR(next_qp);
- }
-
- /*
- * Clear the halt condition so the RISC will be restarted
- * after the return.
- */
- AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0);
- return;
- }
-#endif /* CC_VERY_LONG_SG_LIST */
return;
}
@@ -8223,40 +8043,13 @@ AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
saved_data_cnt = scsiq->q1.data_cnt;
scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr);
scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes);
-#if CC_VERY_LONG_SG_LIST
/*
- * If sg_head->entry_cnt is greater than ASC_MAX_SG_LIST
- * then not all SG elements will fit in the allocated queues.
- * The rest of the SG elements will be copied when the RISC
- * completes the SG elements that fit and halts.
+ * Set sg_entry_cnt to be the number of SG elements that
+ * will fit in the allocated SG queues. It is minus 1, because
+ * the first SG element is handled above.
*/
- if (sg_head->entry_cnt > ASC_MAX_SG_LIST) {
- /*
- * Set sg_entry_cnt to be the number of SG elements that
- * will fit in the allocated SG queues. It is minus 1, because
- * the first SG element is handled above. ASC_MAX_SG_LIST is
- * already inflated by 1 to account for this. For example it
- * may be 50 which is 1 + 7 queues * 7 SG elements.
- */
- sg_entry_cnt = ASC_MAX_SG_LIST - 1;
+ sg_entry_cnt = sg_head->entry_cnt - 1;
- /*
- * Keep track of remaining number of SG elements that will
- * need to be handled from a_isr.c.
- */
- scsiq->remain_sg_entry_cnt =
- sg_head->entry_cnt - ASC_MAX_SG_LIST;
- } else {
-#endif /* CC_VERY_LONG_SG_LIST */
- /*
- * Set sg_entry_cnt to be the number of SG elements that
- * will fit in the allocated SG queues. It is minus 1, because
- * the first SG element is handled above.
- */
- sg_entry_cnt = sg_head->entry_cnt - 1;
-#if CC_VERY_LONG_SG_LIST
- }
-#endif /* CC_VERY_LONG_SG_LIST */
if (sg_entry_cnt != 0) {
scsiq->q1.cntl |= QC_SG_HEAD;
q_addr = ASC_QNO_TO_QADDR(q_no);
@@ -8281,21 +8074,7 @@ AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no)
ASC_SG_LIST_PER_Q - 1;
}
} else {
-#if CC_VERY_LONG_SG_LIST
- /*
- * This is the last SG queue in the list of
- * allocated SG queues. If there are more
- * SG elements than will fit in the allocated
- * queues, then set the QCSG_SG_XFER_MORE flag.
- */
- if (sg_head->entry_cnt > ASC_MAX_SG_LIST) {
- scsi_sg_q.cntl |= QCSG_SG_XFER_MORE;
- } else {
-#endif /* CC_VERY_LONG_SG_LIST */
- scsi_sg_q.cntl |= QCSG_SG_XFER_END;
-#if CC_VERY_LONG_SG_LIST
- }
-#endif /* CC_VERY_LONG_SG_LIST */
+ scsi_sg_q.cntl |= QCSG_SG_XFER_END;
sg_list_dwords = sg_entry_cnt << 1;
if (i == 0) {
scsi_sg_q.sg_list_cnt = sg_entry_cnt;
@@ -8451,12 +8230,10 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
asc_dvc->in_critical_cnt--;
return ASC_ERROR;
}
-#if !CC_VERY_LONG_SG_LIST
if (sg_entry_cnt > ASC_MAX_SG_LIST) {
asc_dvc->in_critical_cnt--;
return ASC_ERROR;
}
-#endif /* !CC_VERY_LONG_SG_LIST */
if (sg_entry_cnt == 1) {
scsiq->q1.data_addr = cpu_to_le32(sg_head->sg_list[0].addr);
scsiq->q1.data_cnt = cpu_to_le32(sg_head->sg_list[0].bytes);
@@ -8545,16 +8322,6 @@ static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq)
}
}
sg_head->entry_to_copy = sg_head->entry_cnt;
-#if CC_VERY_LONG_SG_LIST
- /*
- * Set the sg_entry_cnt to the maximum possible. The rest of
- * the SG elements will be copied when the RISC completes the
- * SG elements that fit and halts.
- */
- if (sg_entry_cnt > ASC_MAX_SG_LIST) {
- sg_entry_cnt = ASC_MAX_SG_LIST;
- }
-#endif /* CC_VERY_LONG_SG_LIST */
n_q_required = AscSgListToQueue(sg_entry_cnt);
if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, n_q_required) >=
(uint) n_q_required)
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 16/22] advansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX'
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (14 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 15/22] advansys: Remove CC_VERY_LONG_SG_LIST Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 17/22] advansys: Remove 'a_flag' Hannes Reinecke
` (5 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
These definitions are only ever used for the wide-scsi board,
so they should be prefixed with 'ADV', not 'ASC'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 02a0d8d..ec77161 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -1700,13 +1700,13 @@ typedef struct adv_carr_t {
/*
* Mask used to eliminate low 4 bits of carrier 'next_vpa' field.
*/
-#define ASC_NEXT_VPA_MASK 0xFFFFFFF0
+#define ADV_NEXT_VPA_MASK 0xFFFFFFF0
-#define ASC_RQ_DONE 0x00000001
-#define ASC_RQ_GOOD 0x00000002
-#define ASC_CQ_STOPPER 0x00000000
+#define ADV_RQ_DONE 0x00000001
+#define ADV_RQ_GOOD 0x00000002
+#define ADV_CQ_STOPPER 0x00000000
-#define ASC_GET_CARRP(carrp) ((carrp) & ASC_NEXT_VPA_MASK)
+#define ADV_GET_CARRP(carrp) ((carrp) & ADV_NEXT_VPA_MASK)
/*
* Each carrier is 64 bytes, and we need three additional
@@ -4295,7 +4295,7 @@ static ADV_CARR_T *adv_get_next_carrier(struct adv_dvc_var *adv_dvc)
/*
* insert stopper carrier to terminate list
*/
- carrp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER);
+ carrp->next_vpa = cpu_to_le32(ADV_CQ_STOPPER);
return carrp;
}
@@ -6198,7 +6198,7 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
* Check if the IRQ stopper carrier contains a completed request.
*/
while (((irq_next_vpa =
- le32_to_cpu(asc_dvc->irq_sp->next_vpa)) & ASC_RQ_DONE) != 0) {
+ le32_to_cpu(asc_dvc->irq_sp->next_vpa)) & ADV_RQ_DONE) != 0) {
/*
* Get a pointer to the newly completed ADV_SCSI_REQ_Q structure.
* The RISC will have set 'areq_vpa' to a virtual address.
@@ -6219,7 +6219,7 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
* DMAed to host memory by the firmware. Set all status fields
* to indicate good status.
*/
- if ((irq_next_vpa & ASC_RQ_GOOD) != 0) {
+ if ((irq_next_vpa & ADV_RQ_GOOD) != 0) {
scsiq->done_status = QD_NO_ERROR;
scsiq->host_status = scsiq->scsi_status = 0;
scsiq->data_cnt = 0L;
@@ -6232,7 +6232,7 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
*/
free_carrp = asc_dvc->irq_sp;
asc_dvc->irq_sp = adv_get_carrier(asc_dvc,
- ASC_GET_CARRP(irq_next_vpa));
+ ADV_GET_CARRP(irq_next_vpa));
free_carrp->next_vpa = asc_dvc->carr_freelist->carr_va;
asc_dvc->carr_freelist = free_carrp;
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 17/22] advansys: Remove 'a_flag'
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (15 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 16/22] advansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX' Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 18/22] advansys: Remove obsolete virtual memory mapping comment Hannes Reinecke
` (4 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Unused, so remove it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 32 +++++++-------------------------
1 file changed, 7 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index ec77161..98efd41 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -1717,16 +1717,6 @@ typedef struct adv_carr_t {
#define ADV_CARRIER_BUFSIZE \
(ADV_CARRIER_COUNT * sizeof(ADV_CARR_T))
-/*
- * ADV_SCSI_REQ_Q 'a_flag' definitions
- *
- * The Adv Library should limit use to the lower nibble (4 bits) of
- * a_flag. Drivers are free to use the upper nibble (4 bits) of a_flag.
- */
-#define ADV_POLL_REQUEST 0x01 /* poll for request completion */
-#define ADV_SCSIQ_DONE 0x02 /* request done */
-#define ADV_DONT_RETRY 0x08 /* don't do retry */
-
#define ADV_CHIP_ASC3550 0x01 /* Ultra-Wide IC */
#define ADV_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */
#define ADV_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */
@@ -1808,8 +1798,6 @@ typedef struct adv_scsi_req_q {
* is used by the Adv Library and ignored by the microcode.
*/
u32 srb_tag;
- uchar a_flag;
- uchar pad[3]; /* Pad out to a word boundary. */
ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */
} ADV_SCSI_REQ_Q;
@@ -2592,15 +2580,15 @@ static void asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b)
printk(" ADV_SG_BLOCK at addr 0x%lx (sgblockno %d)\n",
(ulong)b, sgblockno);
- printk(" sg_cnt %u, sg_ptr 0x%lx\n",
- b->sg_cnt, (ulong)le32_to_cpu(b->sg_ptr));
+ printk(" sg_cnt %u, sg_ptr 0x%x\n",
+ b->sg_cnt, (u32)le32_to_cpu(b->sg_ptr));
BUG_ON(b->sg_cnt > NO_OF_SG_PER_BLOCK);
if (b->sg_ptr != 0)
BUG_ON(b->sg_cnt != NO_OF_SG_PER_BLOCK);
for (i = 0; i < b->sg_cnt; i++) {
- printk(" [%u]: sg_addr 0x%lx, sg_count 0x%lx\n",
- i, (ulong)b->sg_list[i].sg_addr,
- (ulong)b->sg_list[i].sg_count);
+ printk(" [%u]: sg_addr 0x%x, sg_count 0x%x\n",
+ i, (u32)le32_to_cpu(b->sg_list[i].sg_addr),
+ (u32)le32_to_cpu(b->sg_list[i].sg_count));
}
}
@@ -2617,8 +2605,8 @@ static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q)
printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q);
- printk(" target_id %u, target_lun %u, srb_tag 0x%x, a_flag 0x%x\n",
- q->target_id, q->target_lun, q->srb_tag, q->a_flag);
+ printk(" target_id %u, target_lun %u, srb_tag 0x%x\n",
+ q->target_id, q->target_lun, q->srb_tag);
printk(" cntl 0x%x, data_addr 0x%lx\n",
q->cntl, (ulong)le32_to_cpu(q->data_addr));
@@ -6249,7 +6237,6 @@ static int AdvISR(ADV_DVC_VAR *asc_dvc)
* Notify the driver of the completed request by passing
* the ADV_SCSI_REQ_Q pointer to its callback function.
*/
- scsiq->a_flag |= ADV_SCSIQ_DONE;
adv_isr_callback(asc_dvc, scsiq);
/*
* Note: After the driver callback function is called, 'scsiq'
@@ -8431,11 +8418,6 @@ static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, adv_req_t *reqp)
asc_dvc->carr_pending_cnt++;
- /*
- * Clear the ADV_SCSI_REQ_Q done flag.
- */
- scsiq->a_flag &= ~ADV_SCSIQ_DONE;
-
/* Save virtual and physical address of ADV_SCSI_REQ_Q and carrier. */
scsiq->scsiq_ptr = cpu_to_le32(scsiq->srb_tag);
scsiq->scsiq_rptr = cpu_to_le32(reqp->req_addr);
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 18/22] advansys: Remove obsolete virtual memory mapping comment
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (16 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 17/22] advansys: Remove 'a_flag' Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 19/22] advansys: Remove comment around cmd_per_lun Hannes Reinecke
` (3 subsequent siblings)
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 98efd41..424a08d 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -884,16 +884,6 @@ typedef struct asc_mc_saved {
#define AscReadChipDvcID(port) (uchar)inp((port)+IOP_REG_ID)
#define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data)
-/*
- * These macros are used to convert a virtual address to a
- * 32-bit value. This currently can be used on Linux Alpha
- * which uses 64-bit virtual address but a 32-bit bus address.
- * This is likely to break in the future, but doing this now
- * will give us time to change the HW and FW to handle 64-bit
- * addresses.
- */
-#define ADV_U32_TO_VADDR bus_to_virt
-
#define AdvPortAddr void __iomem * /* Virtual memory address size */
/*
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 19/22] advansys: Remove comment around cmd_per_lun
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (17 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 18/22] advansys: Remove obsolete virtual memory mapping comment Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 9:41 ` Christoph Hellwig
2015-04-24 8:32 ` [PATCH 20/22] advansys: Check for DMA mapping errors Hannes Reinecke
` (2 subsequent siblings)
21 siblings, 1 reply; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
Ancient, and pretty much obsolete by now.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 424a08d..4f9392d 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -11213,23 +11213,7 @@ static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop,
goto err_free_dma;
}
- /*
- * Following v1.3.89, 'cmd_per_lun' is no longer needed
- * and should be set to zero.
- *
- * But because of a bug introduced in v1.3.89 if the driver is
- * compiled as a module and 'cmd_per_lun' is zero, the Mid-Level
- * SCSI function 'allocate_device' will panic. To allow the driver
- * to work as a module in these kernels set 'cmd_per_lun' to 1.
- *
- * Note: This is wrong. cmd_per_lun should be set to the depth
- * you want on untagged devices always.
- #ifdef MODULE
- */
shost->cmd_per_lun = 1;
-/* #else
- shost->cmd_per_lun = 0;
-#endif */
/*
* Set the maximum number of scatter-gather elements the
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 20/22] advansys: Check for DMA mapping errors
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (18 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 19/22] advansys: Remove comment around cmd_per_lun Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 21/22] advansys: use spin_lock_irqsave() in interrupt handler Hannes Reinecke
2015-04-24 8:32 ` [PATCH 22/22] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
DMA mapping might fail, so we need to check for errors here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 27 ++++++++++++++++++++++-----
1 file changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 4f9392d..2c9f9e9 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7514,6 +7514,10 @@ static __le32 advansys_get_sense_buffer_dma(struct scsi_cmnd *scp)
struct asc_board *board = shost_priv(scp->device->host);
scp->SCp.dma_handle = dma_map_single(board->dev, scp->sense_buffer,
SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(board->dev, scp->SCp.dma_handle)) {
+ ASC_DBG(1, "failed to map sense buffer\n");
+ return 0;
+ }
dma_cache_sync(board->dev, scp->sense_buffer,
SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
return cpu_to_le32(scp->SCp.dma_handle);
@@ -7546,6 +7550,8 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun);
asc_scsi_q->q1.sense_addr = advansys_get_sense_buffer_dma(scp);
asc_scsi_q->q1.sense_len = SCSI_SENSE_BUFFERSIZE;
+ if (!asc_scsi_q->q1.sense_addr)
+ return ASC_BUSY;
/*
* If there are any outstanding requests for the current target,
@@ -7567,7 +7573,10 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
/* Build ASC_SCSI_Q */
use_sg = scsi_dma_map(scp);
- if (use_sg != 0) {
+ if (use_sg < 0) {
+ ASC_DBG(1, "failed to map sglist\n");
+ return ASC_BUSY;
+ } else if (use_sg > 0) {
int sgcnt;
struct scatterlist *slp;
struct asc_sg_head *asc_sg_head;
@@ -7799,6 +7808,11 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
sense_addr = dma_map_single(boardp->dev, scp->sense_buffer,
SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(boardp->dev, sense_addr)) {
+ ASC_DBG(1, "failed to map sense buffer\n");
+ ASC_STATS(scp->device->host, adv_build_noreq);
+ return ASC_BUSY;
+ }
scsiqp->sense_addr = cpu_to_le32(sense_addr);
scsiqp->sense_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
dma_cache_sync(boardp->dev, scp->sense_buffer,
@@ -7807,7 +7821,11 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
/* Build ADV_SCSI_REQ_Q */
use_sg = scsi_dma_map(scp);
- if (use_sg == 0) {
+ if (use_sg < 0) {
+ ASC_DBG(1, "failed to map SG list\n");
+ ASC_STATS(scp->device->host, adv_build_noreq);
+ return ASC_BUSY;
+ } else if (use_sg == 0) {
/* Zero-length transfer */
reqp->sgblkp = NULL;
scsiqp->data_cnt = 0;
@@ -8475,11 +8493,10 @@ static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var;
struct asc_scsi_q asc_scsi_q;
- /* asc_build_req() can not return ASC_BUSY. */
ret = asc_build_req(boardp, scp, &asc_scsi_q);
- if (ret == ASC_ERROR) {
+ if (ret != ASC_NOERROR) {
ASC_STATS(scp->device->host, build_error);
- return ASC_ERROR;
+ return ret;
}
ret = AscExeScsiQueue(asc_dvc, &asc_scsi_q);
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 21/22] advansys: use spin_lock_irqsave() in interrupt handler
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (19 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 20/22] advansys: Check for DMA mapping errors Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 22/22] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
21 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
We should be using spin_lock_irqsave() when within the
interrupt handler.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/scsi/advansys.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 2c9f9e9..2c4efb4 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7242,9 +7242,10 @@ static irqreturn_t advansys_interrupt(int irq, void *dev_id)
struct Scsi_Host *shost = dev_id;
struct asc_board *boardp = shost_priv(shost);
irqreturn_t result = IRQ_NONE;
+ unsigned long flags;
ASC_DBG(2, "boardp 0x%p\n", boardp);
- spin_lock(shost->host_lock);
+ spin_lock_irqsave(shost->host_lock, flags);
if (ASC_NARROW_BOARD(boardp)) {
if (AscIsIntPending(shost->io_port)) {
result = IRQ_HANDLED;
@@ -7259,7 +7260,7 @@ static irqreturn_t advansys_interrupt(int irq, void *dev_id)
ASC_STATS(shost, interrupt);
}
}
- spin_unlock(shost->host_lock);
+ spin_unlock_irqrestore(shost->host_lock, flags);
ASC_DBG(1, "end\n");
return result;
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 22/22] advansys: Update to version 3.5 and remove compilation warning
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
` (20 preceding siblings ...)
2015-04-24 8:32 ` [PATCH 21/22] advansys: use spin_lock_irqsave() in interrupt handler Hannes Reinecke
@ 2015-04-24 8:32 ` Hannes Reinecke
2015-04-24 9:42 ` Christoph Hellwig
21 siblings, 1 reply; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 8:32 UTC (permalink / raw)
To: James Bottomley
Cc: Christoph Hellwig, Ondrey Zary, Doug Gilberg, linux-scsi,
Hannes Reinecke
The driver has now been converted to DMA-API, so we should
increase the version number and remove the compilation
warning.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
MAINTAINERS | 1 +
drivers/scsi/Kconfig | 2 +-
drivers/scsi/advansys.c | 25 +++++++++----------------
3 files changed, 11 insertions(+), 17 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index ea00017..e784106 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -445,6 +445,7 @@ F: drivers/input/misc/adxl34x.c
ADVANSYS SCSI DRIVER
M: Matthew Wilcox <matthew@wil.cx>
+M: Hannes Reinecke <hare@suse.de>
L: linux-scsi@vger.kernel.org
S: Maintained
F: Documentation/scsi/advansys.txt
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index b021bcb..ae7daf2 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -503,7 +503,7 @@ config SCSI_DPT_I2O
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
- depends on SCSI && VIRT_TO_BUS && !ARM
+ depends on SCSI && !ARM
depends on ISA || EISA || PCI
help
This is a driver for all SCSI host adapters manufactured by
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 2c4efb4..2963286 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -1,12 +1,10 @@
-#define DRV_NAME "advansys"
-#define ASC_VERSION "3.4" /* AdvanSys Driver Version */
-
/*
* advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
*
* Copyright (c) 1995-2000 Advanced System Products, Inc.
* Copyright (c) 2000-2001 ConnectCom Solutions, Inc.
* Copyright (c) 2007 Matthew Wilcox <matthew@wil.cx>
+ * Copyright (c) 2014 Hannes Reinecke <hare@suse.de>
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
@@ -49,26 +47,21 @@
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
+#define DRV_NAME "advansys"
+#define ASC_VERSION "3.5" /* AdvanSys Driver Version */
+
/* FIXME:
*
- * 1. Although all of the necessary command mapping places have the
- * appropriate dma_map.. APIs, the driver still processes its internal
- * queue using bus_to_virt() and virt_to_bus() which are illegal under
- * the API. The entire queue processing structure will need to be
- * altered to fix this.
- * 2. Need to add memory mapping workaround. Test the memory mapping.
+ * 1. Need to add memory mapping workaround. Test the memory mapping.
* If it doesn't work revert to I/O port access. Can a test be done
* safely?
- * 3. Handle an interrupt not working. Keep an interrupt counter in
+ * 2. Handle an interrupt not working. Keep an interrupt counter in
* the interrupt handler. In the timeout function if the interrupt
* has not occurred then print a message and run in polled mode.
- * 4. Need to add support for target mode commands, cf. CAM XPT.
- * 5. check DMA mapping functions for failure
- * 6. Use scsi_transport_spi
- * 7. advansys_info is not safe against multiple simultaneous callers
- * 8. Add module_param to override ISA/VLB ioport array
+ * 3. Use scsi_transport_spi
+ * 4. advansys_info is not safe against multiple simultaneous callers
+ * 5. Add module_param to override ISA/VLB ioport array
*/
-#warning this driver is still not properly converted to the DMA API
/* Enable driver /proc statistics. */
#define ADVANSYS_STATS
--
1.8.5.2
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 19/22] advansys: Remove comment around cmd_per_lun
2015-04-24 8:32 ` [PATCH 19/22] advansys: Remove comment around cmd_per_lun Hannes Reinecke
@ 2015-04-24 9:41 ` Christoph Hellwig
2015-04-24 9:47 ` Hannes Reinecke
0 siblings, 1 reply; 27+ messages in thread
From: Christoph Hellwig @ 2015-04-24 9:41 UTC (permalink / raw)
To: Hannes Reinecke
Cc: James Bottomley, Christoph Hellwig, Ondrey Zary, Doug Gilberg,
linux-scsi
On Fri, Apr 24, 2015 at 10:32:54AM +0200, Hannes Reinecke wrote:
> Ancient, and pretty much obsolete by now.
And still doesn't address the fixme. You probably should remove the
cmd_per_lun setting entirely.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 22/22] advansys: Update to version 3.5 and remove compilation warning
2015-04-24 8:32 ` [PATCH 22/22] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
@ 2015-04-24 9:42 ` Christoph Hellwig
2015-04-24 9:47 ` Hannes Reinecke
0 siblings, 1 reply; 27+ messages in thread
From: Christoph Hellwig @ 2015-04-24 9:42 UTC (permalink / raw)
To: Hannes Reinecke
Cc: James Bottomley, Christoph Hellwig, Ondrey Zary, Doug Gilberg,
linux-scsi
> config SCSI_ADVANSYS
> tristate "AdvanSys SCSI support"
> - depends on SCSI && VIRT_TO_BUS && !ARM
> + depends on SCSI && !ARM
Care to remove the bogus call to dma_cache_sync and allow compiling on
arm as well?
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 19/22] advansys: Remove comment around cmd_per_lun
2015-04-24 9:41 ` Christoph Hellwig
@ 2015-04-24 9:47 ` Hannes Reinecke
0 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 9:47 UTC (permalink / raw)
To: Christoph Hellwig
Cc: James Bottomley, Christoph Hellwig, Ondrey Zary, Doug Gilberg,
linux-scsi
On 04/24/2015 11:41 AM, Christoph Hellwig wrote:
> On Fri, Apr 24, 2015 at 10:32:54AM +0200, Hannes Reinecke wrote:
>> Ancient, and pretty much obsolete by now.
>
> And still doesn't address the fixme. You probably should remove the
> cmd_per_lun setting entirely.
>
Okay, will do.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH 22/22] advansys: Update to version 3.5 and remove compilation warning
2015-04-24 9:42 ` Christoph Hellwig
@ 2015-04-24 9:47 ` Hannes Reinecke
0 siblings, 0 replies; 27+ messages in thread
From: Hannes Reinecke @ 2015-04-24 9:47 UTC (permalink / raw)
To: Christoph Hellwig
Cc: James Bottomley, Christoph Hellwig, Ondrey Zary, Doug Gilberg,
linux-scsi
On 04/24/2015 11:42 AM, Christoph Hellwig wrote:
>> config SCSI_ADVANSYS
>> tristate "AdvanSys SCSI support"
>> - depends on SCSI && VIRT_TO_BUS && !ARM
>> + depends on SCSI && !ARM
>
> Care to remove the bogus call to dma_cache_sync and allow compiling on
> arm as well?
>
Sure, no problem.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2015-04-24 9:47 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-04-24 8:32 [PATCHv2 00/22] Nobody loves the advansys driver Hannes Reinecke
2015-04-24 8:32 ` [PATCH 01/22] advansys: use host_reset Hannes Reinecke
2015-04-24 8:32 ` [PATCH 02/22] advansys: use shared host tag map for command lookup Hannes Reinecke
2015-04-24 8:32 ` [PATCH 03/22] advansys: use DMA-API for mapping sense buffer Hannes Reinecke
2015-04-24 8:32 ` [PATCH 04/22] advansys: Use DMA-API for carrier buffer Hannes Reinecke
2015-04-24 8:32 ` [PATCH 05/22] advansys: Use DMA-API for mapping request blocks Hannes Reinecke
2015-04-24 8:32 ` [PATCH 06/22] advansys: Use dma_pool for sg elements Hannes Reinecke
2015-04-24 8:32 ` [PATCH 07/22] advansys: use 'bool' instead of 'int' Hannes Reinecke
2015-04-24 8:32 ` [PATCH 08/22] advansys: use standard data types Hannes Reinecke
2015-04-24 8:32 ` [PATCH 09/22] advansys: Remove 'TRUE' and 'FALSE' definitions Hannes Reinecke
2015-04-24 8:32 ` [PATCH 10/22] advansys: remove 'ERR' definition Hannes Reinecke
2015-04-24 8:32 ` [PATCH 11/22] advansys: Make AscIsrChipHalted() a void function Hannes Reinecke
2015-04-24 8:32 ` [PATCH 12/22] advansys: cleanup function return codes Hannes Reinecke
2015-04-24 8:32 ` [PATCH 13/22] advansys: scsi_q1->data_addr is little endian Hannes Reinecke
2015-04-24 8:32 ` [PATCH 14/22] advansys: Remove ASC_SCSI_REQ_Q Hannes Reinecke
2015-04-24 8:32 ` [PATCH 15/22] advansys: Remove CC_VERY_LONG_SG_LIST Hannes Reinecke
2015-04-24 8:32 ` [PATCH 16/22] advansys: rename 'ASC_RQ_XX' to 'ADV_RQ_XX' Hannes Reinecke
2015-04-24 8:32 ` [PATCH 17/22] advansys: Remove 'a_flag' Hannes Reinecke
2015-04-24 8:32 ` [PATCH 18/22] advansys: Remove obsolete virtual memory mapping comment Hannes Reinecke
2015-04-24 8:32 ` [PATCH 19/22] advansys: Remove comment around cmd_per_lun Hannes Reinecke
2015-04-24 9:41 ` Christoph Hellwig
2015-04-24 9:47 ` Hannes Reinecke
2015-04-24 8:32 ` [PATCH 20/22] advansys: Check for DMA mapping errors Hannes Reinecke
2015-04-24 8:32 ` [PATCH 21/22] advansys: use spin_lock_irqsave() in interrupt handler Hannes Reinecke
2015-04-24 8:32 ` [PATCH 22/22] advansys: Update to version 3.5 and remove compilation warning Hannes Reinecke
2015-04-24 9:42 ` Christoph Hellwig
2015-04-24 9:47 ` Hannes Reinecke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox