From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
asutoshd@codeaurora.org, jejb@linux.ibm.com,
martin.petersen@oracle.com, stanley.chu@mediatek.com,
beanhuo@micron.com, bvanassche@acm.org, tomas.winkler@intel.com,
cang@codeaurora.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 8/9] scsi: ufs: Initialize max_lu_supported
Date: Thu, 16 Jan 2020 22:59:13 +0100 [thread overview]
Message-ID: <20200116215914.16015-9-huobean@gmail.com> (raw)
In-Reply-To: <20200116215914.16015-1-huobean@gmail.com>
From: Bean Huo <beanhuo@micron.com>
This patch is to initialize max_lu_supported, it also adds a new
function ufshcd_init_device_geo_params() for initialization of UFS
device geometry descriptor related parameters which are used by
driver. In this version patch, there is only dev_info.max_lu_supported
being initialized.
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
---
drivers/scsi/ufs/ufshcd.c | 41 +++++++++++++++++++++++++++++++++++++--
1 file changed, 39 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 31b6e2a7c166..0c4fb5d447da 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6858,6 +6858,37 @@ static void ufshcd_init_desc_sizes(struct ufs_hba *hba)
hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE;
}
+static int ufshcd_init_device_geo_params(struct ufs_hba *hba)
+{
+ int err;
+ size_t buff_len;
+ u8 *desc_buf;
+
+ buff_len = hba->desc_size.geom_desc;
+ desc_buf = kmalloc(buff_len, GFP_KERNEL);
+ if (!desc_buf) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = ufshcd_read_desc(hba, QUERY_DESC_IDN_GEOMETRY, 0,
+ desc_buf, buff_len);
+ if (err) {
+ dev_err(hba->dev, "%s: Failed reading Geometry Desc. err = %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 1)
+ hba->dev_info.max_lu_supported = 32;
+ else if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 0)
+ hba->dev_info.max_lu_supported = 8;
+
+out:
+ kfree(desc_buf);
+ return err;
+}
+
static struct ufs_ref_clk ufs_ref_clk_freqs[] = {
{19200000, REF_CLK_FREQ_19_2_MHZ},
{26000000, REF_CLK_FREQ_26_MHZ},
@@ -6931,9 +6962,17 @@ static int ufs_init_params(struct ufs_hba *hba)
bool flag;
int ret;
+ /* Clear any previous UFS device information */
+ memset(&hba->dev_info, 0, sizeof(hba->dev_info));
+
/* Init check for device descriptor sizes */
ufshcd_init_desc_sizes(hba);
+ /* Init UFS geometry descriptor related parameters */
+ ret = ufshcd_init_device_geo_params(hba);
+ if (ret)
+ goto out;
+
/* Check and apply UFS device quirks */
ret = ufs_get_device_desc(hba);
if (ret) {
@@ -6944,8 +6983,6 @@ static int ufs_init_params(struct ufs_hba *hba)
ufs_fixup_device_setup(hba);
- /* Clear any previous UFS device information */
- memset(&hba->dev_info, 0, sizeof(hba->dev_info));
if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,
QUERY_FLAG_IDN_PWR_ON_WPE, &flag))
hba->dev_info.f_power_on_wp_en = flag;
--
2.17.1
next prev parent reply other threads:[~2020-01-16 22:00 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 21:59 [PATCH v2 0/9] Use UFS device indicated maximum LU number Bean Huo
2020-01-16 21:59 ` [PATCH v2 1/9] scsi: ufs: goto with returned value while failed to add WL Bean Huo
2020-01-17 3:56 ` Bart Van Assche
2020-01-17 12:57 ` [EXT] " Bean Huo (beanhuo)
2020-01-17 18:23 ` Asutosh Das (asd)
2020-01-16 21:59 ` [PATCH v2 2/9] scsi: ufs: Delete struct ufs_dev_desc Bean Huo
2020-01-17 3:53 ` Bart Van Assche
2020-01-17 12:55 ` [EXT] " Bean Huo (beanhuo)
2020-01-17 18:21 ` Asutosh Das (asd)
2020-01-16 21:59 ` [PATCH v2 3/9] scsi: ufs: Split ufshcd_probe_hba() based on its called flow Bean Huo
2020-01-17 20:13 ` Asutosh Das (asd)
2020-01-16 21:59 ` [PATCH v2 4/9] scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufs_init_params() Bean Huo
2020-01-16 21:59 ` [PATCH v2 5/9] scsi: ufs: Delete two unnecessary functions Bean Huo
2020-01-17 3:58 ` Bart Van Assche
2020-01-17 13:32 ` [EXT] " Bean Huo (beanhuo)
2020-01-16 21:59 ` [PATCH v2 6/9] scsi: ufs: Delete is_init_prefetch from struct ufs_hba Bean Huo
2020-01-17 4:00 ` Bart Van Assche
2020-01-17 13:12 ` [EXT] " Bean Huo (beanhuo)
2020-01-16 21:59 ` [PATCH v2 7/9] scsi: ufs: Add max_lu_supported in struct ufs_dev_info Bean Huo
2020-01-17 4:02 ` Bart Van Assche
2020-01-17 13:17 ` [EXT] " Bean Huo (beanhuo)
2020-01-16 21:59 ` Bean Huo [this message]
2020-01-16 21:59 ` [PATCH v2 9/9] scsi: ufs: Use UFS device indicated maximum LU number Bean Huo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116215914.16015-9-huobean@gmail.com \
--to=huobean@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=stanley.chu@mediatek.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox