[PATCH v4 35/36] scsi: cxlflash: Have scsi-ml retry read_cap16 errors

[Mike Christie <michael.christie@oracle.com>]

This has read_cap16 have scsi-ml retry errors instead of driving them
itself.

Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
---
 drivers/scsi/cxlflash/superpipe.c | 46 ++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/cxlflash/superpipe.c b/drivers/scsi/cxlflash/superpipe.c
index 724e52f0b58c..8627c825d031 100644
--- a/drivers/scsi/cxlflash/superpipe.c
+++ b/drivers/scsi/cxlflash/superpipe.c
@@ -337,10 +337,32 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
 	u8 *scsi_cmd = NULL;
 	int rc = 0;
 	int result = 0;
-	int retry_cnt = 0;
 	u32 to = CMD_TIMEOUT * HZ;
+	struct scsi_failure failures[] = {
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x29,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 1,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x2A,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 1,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{
+			.sense = UNIT_ATTENTION,
+			.asc = 0x3F,
+			.ascq = SCMD_FAILURE_ASCQ_ANY,
+			.allowed = 1,
+			.result = SAM_STAT_CHECK_CONDITION,
+		},
+		{},
+	};
 
-retry:
 	cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
 	scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL);
 	if (unlikely(!cmd_buf || !scsi_cmd)) {
@@ -352,8 +374,7 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
 	scsi_cmd[1] = SAI_READ_CAPACITY_16;	/* service action */
 	put_unaligned_be32(CMD_BUFSIZE, &scsi_cmd[10]);
 
-	dev_dbg(dev, "%s: %ssending cmd(%02x)\n", __func__,
-		retry_cnt ? "re" : "", scsi_cmd[0]);
+	dev_dbg(dev, "%s: sending cmd(%02x)\n", __func__, scsi_cmd[0]);
 
 	/* Drop the ioctl read semahpore across lengthy call */
 	up_read(&cfg->ioctl_rwsem);
@@ -365,7 +386,8 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
 					.buf_len = CMD_BUFSIZE,
 					.sshdr = &sshdr,
 					.timeout = to,
-					.retries = CMD_RETRIES }));
+					.retries = CMD_RETRIES,
+					.failures = failures }));
 	down_read(&cfg->ioctl_rwsem);
 	rc = check_state(cfg);
 	if (rc) {
@@ -383,20 +405,6 @@ static int read_cap16(struct scsi_device *sdev, struct llun_info *lli)
 			case NOT_READY:
 				result &= ~SAM_STAT_CHECK_CONDITION;
 				break;
-			case UNIT_ATTENTION:
-				switch (sshdr.asc) {
-				case 0x29: /* Power on Reset or Device Reset */
-					fallthrough;
-				case 0x2A: /* Device capacity changed */
-				case 0x3F: /* Report LUNs changed */
-					/* Retry the command once more */
-					if (retry_cnt++ < 1) {
-						kfree(cmd_buf);
-						kfree(scsi_cmd);
-						goto retry;
-					}
-				}
-				break;
 			default:
 				break;
 			}
-- 
2.25.1