[PATCH 0/5] mpi3mr: Add support for Broadcom SAS5116 IO/RAID controllers

[PATCH 0/5] mpi3mr: Add support for Broadcom SAS5116 IO/RAID controllers

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 701 bytes --]

These patches add support for Broadcom's SAS5116 IO/RAID controllers
in mpi3mr driver. 

Sumit Saxena (5):
  mpi3mr: Add support for SAS5116 PCI IDs
  mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116
  mpi3mr: Increase maximum number of PHYs to 64 from 32
  mpi3mr: Add support for status reply descriptor
  mpi3mr: driver version upgrade to 8.5.0.0.50

 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h    |  1 +
 drivers/scsi/mpi3mr/mpi3mr.h           |  6 +++---
 drivers/scsi/mpi3mr/mpi3mr_fw.c        |  6 +++++-
 drivers/scsi/mpi3mr/mpi3mr_os.c        | 13 ++++++++++++-
 drivers/scsi/mpi3mr/mpi3mr_transport.c | 16 ++++++++--------
 5 files changed, 29 insertions(+), 13 deletions(-)

-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

Re: [PATCH 0/5] mpi3mr: Add support for Broadcom SAS5116 IO/RAID controllers

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 308 bytes --]

On Thu, Nov 23, 2023 at 9:14 PM Sumit Saxena <sumit.saxena@broadcom.com> wrote:
>
> These patches add support for Broadcom's SAS5116 IO/RAID controllers
> in mpi3mr driver.
>
Please ignore this email. Copy/Paste error leads to sending with the
wrong email id of Martin.
Apologies for the spamming.

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

[PATCH 1/5] mpi3mr: Add support for SAS5116 PCI IDs

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 918 bytes --]

Add support for Broadcom's SAS5116 IO/RAID controllers PCI IDs.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr_os.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 040031eb0c12..a8d7dbf0159a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -5430,6 +5430,14 @@ static const struct pci_device_id mpi3mr_pci_id_table[] = {
 		PCI_DEVICE_SUB(MPI3_MFGPAGE_VENDORID_BROADCOM,
 		    MPI3_MFGPAGE_DEVID_SAS4116, PCI_ANY_ID, PCI_ANY_ID)
 	},
+	{
+		PCI_DEVICE_SUB(MPI3_MFGPAGE_VENDORID_BROADCOM,
+		    MPI3_MFGPAGE_DEVID_SAS5116_MPI, PCI_ANY_ID, PCI_ANY_ID)
+	},
+	{
+		PCI_DEVICE_SUB(MPI3_MFGPAGE_VENDORID_BROADCOM,
+		    MPI3_MFGPAGE_DEVID_SAS5116_MPI_MGMT, PCI_ANY_ID, PCI_ANY_ID)
+	},
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, mpi3mr_pci_id_table);
-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

[PATCH 2/5] mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 1468 bytes --]

Added PCI IDs checks for the cases where SAS5116 diverges from
SAS4116 in behavior.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr_fw.c | 3 ++-
 drivers/scsi/mpi3mr/mpi3mr_os.c | 5 ++++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index f039f1d98647..0d148c39ebcc 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1892,7 +1892,8 @@ static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx)
 
 	reply_qid = qidx + 1;
 	op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD;
-	if (!mrioc->pdev->revision)
+	if ((mrioc->pdev->device == MPI3_MFGPAGE_DEVID_SAS4116) &&
+		!mrioc->pdev->revision)
 		op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD4K;
 	op_reply_q->ci = 0;
 	op_reply_q->ephase = 1;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index a8d7dbf0159a..91a22e6e5c3f 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -5101,7 +5101,10 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		mpi3mr_init_drv_cmd(&mrioc->evtack_cmds[i],
 				    MPI3MR_HOSTTAG_EVTACKCMD_MIN + i);
 
-	if (pdev->revision)
+	if ((pdev->device == MPI3_MFGPAGE_DEVID_SAS4116) &&
+		!pdev->revision)
+		mrioc->enable_segqueue = false;
+	else
 		mrioc->enable_segqueue = true;
 
 	init_waitqueue_head(&mrioc->reset_waitq);
-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

[PATCH 3/5] mpi3mr: Increase maximum number of PHYs to 64 from 32

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 4338 bytes --]

SAS5116 controllers supports maximum 48 physical PHYs.
Driver is modified to accommodate up to 64 PHYs(though
current need is to support 48 PHYs).

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr.h           |  2 +-
 drivers/scsi/mpi3mr/mpi3mr_transport.c | 16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index ae98d15c30b1..7658e8aaadbe 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -506,7 +506,7 @@ struct mpi3mr_sas_port {
 	u8 num_phys;
 	u8 marked_responding;
 	int lowest_phy;
-	u32 phy_mask;
+	u64 phy_mask;
 	struct mpi3mr_hba_port *hba_port;
 	struct sas_identify remote_identify;
 	struct sas_rphy *rphy;
diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index 82b55e955730..c0c8ab586957 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -1587,7 +1587,7 @@ static void mpi3mr_sas_port_remove(struct mpi3mr_ioc *mrioc, u64 sas_address,
  */
 struct host_port {
 	u64	sas_address;
-	u32	phy_mask;
+	u64	phy_mask;
 	u16	handle;
 	u8	iounit_port_id;
 	u8	used;
@@ -1611,7 +1611,7 @@ mpi3mr_update_mr_sas_port(struct mpi3mr_ioc *mrioc, struct host_port *h_port,
 	struct mpi3mr_sas_port *mr_sas_port)
 {
 	struct mpi3mr_sas_phy *mr_sas_phy;
-	u32 phy_mask_xor;
+	u64 phy_mask_xor;
 	u64 phys_to_be_added, phys_to_be_removed;
 	int i;
 
@@ -1619,7 +1619,7 @@ mpi3mr_update_mr_sas_port(struct mpi3mr_ioc *mrioc, struct host_port *h_port,
 	mr_sas_port->marked_responding = 1;
 
 	dev_info(&mr_sas_port->port->dev,
-	    "sas_address(0x%016llx), old: port_id %d phy_mask 0x%x, new: port_id %d phy_mask:0x%x\n",
+	    "sas_address(0x%016llx), old: port_id %d phy_mask 0x%llx, new: port_id %d phy_mask:0x%llx\n",
 	    mr_sas_port->remote_identify.sas_address,
 	    mr_sas_port->hba_port->port_id, mr_sas_port->phy_mask,
 	    h_port->iounit_port_id, h_port->phy_mask);
@@ -1637,7 +1637,7 @@ mpi3mr_update_mr_sas_port(struct mpi3mr_ioc *mrioc, struct host_port *h_port,
 	 * if these phys are previously registered with another port
 	 * then delete these phys from that port first.
 	 */
-	for_each_set_bit(i, (ulong *) &phys_to_be_added, BITS_PER_TYPE(u32)) {
+	for_each_set_bit(i, (ulong *) &phys_to_be_added, BITS_PER_TYPE(u64)) {
 		mr_sas_phy = &mrioc->sas_hba.phy[i];
 		if (mr_sas_phy->phy_belongs_to_port)
 			mpi3mr_del_phy_from_an_existing_port(mrioc,
@@ -1649,7 +1649,7 @@ mpi3mr_update_mr_sas_port(struct mpi3mr_ioc *mrioc, struct host_port *h_port,
 	}
 
 	/* Delete the phys which are not part of current mr_sas_port's port. */
-	for_each_set_bit(i, (ulong *) &phys_to_be_removed, BITS_PER_TYPE(u32)) {
+	for_each_set_bit(i, (ulong *) &phys_to_be_removed, BITS_PER_TYPE(u64)) {
 		mr_sas_phy = &mrioc->sas_hba.phy[i];
 		if (mr_sas_phy->phy_belongs_to_port)
 			mpi3mr_del_phy_from_an_existing_port(mrioc,
@@ -1671,7 +1671,7 @@ mpi3mr_update_mr_sas_port(struct mpi3mr_ioc *mrioc, struct host_port *h_port,
 void
 mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc)
 {
-	struct host_port h_port[32];
+	struct host_port h_port[64];
 	int i, j, found, host_port_count = 0, port_idx;
 	u16 sz, attached_handle, ioc_status;
 	struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0 = NULL;
@@ -1742,7 +1742,7 @@ mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc)
 		list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list,
 		    port_list) {
 			ioc_info(mrioc,
-			    "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%x), lowest phy id:%d\n",
+			    "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%llx), lowest phy id:%d\n",
 			    mr_sas_port->hba_port->port_id,
 			    mr_sas_port->remote_identify.sas_address,
 			    mr_sas_port->phy_mask, mr_sas_port->lowest_phy);
@@ -1751,7 +1751,7 @@ mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc)
 		ioc_info(mrioc, "Host port details after reset\n");
 		for (i = 0; i < host_port_count; i++) {
 			ioc_info(mrioc,
-			    "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%x), lowest phy id:%d\n",
+			    "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%llx), lowest phy id:%d\n",
 			    h_port[i].iounit_port_id, h_port[i].sas_address,
 			    h_port[i].phy_mask, h_port[i].lowest_phy);
 		}
-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

[PATCH 4/5] mpi3mr: Add support for status reply descriptor

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 1448 bytes --]

Inform controller firmware that driver supports status reply descriptor.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1 +
 drivers/scsi/mpi3mr/mpi3mr_fw.c     | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
index 1e4a60fc655f..0cb24fc03620 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
@@ -28,6 +28,7 @@ struct mpi3_ioc_init_request {
 	__le64                   driver_information_address;
 };
 
+#define MPI3_IOCINIT_MSGFLAGS_SCSIIOSTATUSREPLY_SUPPORTED	(0x04)
 #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_MASK          (0x03)
 #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_NOT_USED      (0x00)
 #define MPI3_IOCINIT_MSGFLAGS_HOSTMETADATA_SEPARATED     (0x01)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 0d148c39ebcc..1ad2f88e0528 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -3194,6 +3194,9 @@ static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc)
 	current_time = ktime_get_real();
 	iocinit_req.time_stamp = cpu_to_le64(ktime_to_ms(current_time));
 
+	iocinit_req.msg_flags |=
+	    MPI3_IOCINIT_MSGFLAGS_SCSIIOSTATUSREPLY_SUPPORTED;
+
 	init_completion(&mrioc->init_cmds.done);
 	retval = mpi3mr_admin_request_post(mrioc, &iocinit_req,
 	    sizeof(iocinit_req), 1);
-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

[PATCH 5/5] mpi3mr: driver version upgrade to 8.5.0.0.50

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 754 bytes --]

Update driver version to 8.5.0.0.50.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 7658e8aaadbe..4f49f8396309 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -55,8 +55,8 @@ extern struct list_head mrioc_list;
 extern int prot_mask;
 extern atomic64_t event_counter;
 
-#define MPI3MR_DRIVER_VERSION	"8.5.0.0.0"
-#define MPI3MR_DRIVER_RELDATE	"24-July-2023"
+#define MPI3MR_DRIVER_VERSION	"8.5.0.0.50"
+#define MPI3MR_DRIVER_RELDATE	"22-November-2023"
 
 #define MPI3MR_DRIVER_NAME	"mpi3mr"
 #define MPI3MR_DRIVER_LICENSE	"GPL"
-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

[PATCH 0/5] mpi3mr: Add support for Broadcom SAS5116 IO/RAID controllers

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 701 bytes --]

These patches add support for Broadcom's SAS5116 IO/RAID controllers
in mpi3mr driver. 

Sumit Saxena (5):
  mpi3mr: Add support for SAS5116 PCI IDs
  mpi3mr: Add PCI checks where SAS5116 diverges from SAS4116
  mpi3mr: Increase maximum number of PHYs to 64 from 32
  mpi3mr: Add support for status reply descriptor
  mpi3mr: driver version upgrade to 8.5.0.0.50

 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h    |  1 +
 drivers/scsi/mpi3mr/mpi3mr.h           |  6 +++---
 drivers/scsi/mpi3mr/mpi3mr_fw.c        |  6 +++++-
 drivers/scsi/mpi3mr/mpi3mr_os.c        | 13 ++++++++++++-
 drivers/scsi/mpi3mr/mpi3mr_transport.c | 16 ++++++++--------
 5 files changed, 29 insertions(+), 13 deletions(-)

-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]

[PATCH 1/5] mpi3mr: Add support for SAS5116 PCI IDs

[Sumit Saxena]

[-- Attachment #1: Type: text/plain, Size: 918 bytes --]

Add support for Broadcom's SAS5116 IO/RAID controllers PCI IDs.

Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi3mr_os.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 040031eb0c12..a8d7dbf0159a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -5430,6 +5430,14 @@ static const struct pci_device_id mpi3mr_pci_id_table[] = {
 		PCI_DEVICE_SUB(MPI3_MFGPAGE_VENDORID_BROADCOM,
 		    MPI3_MFGPAGE_DEVID_SAS4116, PCI_ANY_ID, PCI_ANY_ID)
 	},
+	{
+		PCI_DEVICE_SUB(MPI3_MFGPAGE_VENDORID_BROADCOM,
+		    MPI3_MFGPAGE_DEVID_SAS5116_MPI, PCI_ANY_ID, PCI_ANY_ID)
+	},
+	{
+		PCI_DEVICE_SUB(MPI3_MFGPAGE_VENDORID_BROADCOM,
+		    MPI3_MFGPAGE_DEVID_SAS5116_MPI_MGMT, PCI_ANY_ID, PCI_ANY_ID)
+	},
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, mpi3mr_pci_id_table);
-- 
2.18.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]