[PATCH v16 21/26] scsi: core: Retry unaligned zoned writes

[Bart Van Assche <bvanassche@acm.org>]

If zoned writes (REQ_OP_WRITE) for a sequential write required zone have
a starting LBA that differs from the write pointer, e.g. because zoned
writes have been reordered, then the storage device will respond with an
UNALIGNED WRITE COMMAND error. Retry commands that failed with an
unaligned write error. The block layer core will sort the SCSI commands
per LBA before these are resubmitted.

If the write order is preserved, increase the number of retries for
write commands sent to a sequential zone to the maximum number of
outstanding commands because in the worst case the number of times
reordered zoned writes have to be retried is (number of outstanding
writes per sequential zone) - 1.

Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/scsi/scsi_error.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 10154d78e336..24cd8e8538e5 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -700,6 +700,22 @@ enum scsi_disposition scsi_check_sense(struct scsi_cmnd *scmd)
 		fallthrough;
 
 	case ILLEGAL_REQUEST:
+		/*
+		 * Unaligned write command. This may indicate that zoned writes
+		 * have been received by the device in the wrong order. If write
+		 * pipelining is enabled, retry.
+		 */
+		if (sshdr.asc == 0x21 && sshdr.ascq == 0x04 &&
+		    req->q->limits.driver_preserves_write_order &&
+		    blk_rq_is_seq_zoned_write(req) &&
+		    scsi_cmd_retry_allowed(scmd)) {
+			SCSI_LOG_ERROR_RECOVERY(1,
+				sdev_printk(KERN_WARNING, scmd->device,
+				"Retrying unaligned write at LBA %#llx.\n",
+				scsi_get_lba(scmd)));
+			return NEEDS_RETRY;
+		}
+
 		if (sshdr.asc == 0x20 || /* Invalid command operation code */
 		    sshdr.asc == 0x21 || /* Logical block address out of range */
 		    sshdr.asc == 0x22 || /* Invalid function */