From: Adrian Hunter <adrian.hunter@intel.com>
To: Martin K Petersen <martin.petersen@oracle.com>
Cc: James EJ Bottomley <James.Bottomley@HansenPartnership.com>,
Bart Van Assche <bvanassche@acm.org>,
Avri Altman <avri.altman@sandisk.com>,
Archana Patni <archana.patni@intel.com>,
linux-scsi@vger.kernel.org
Subject: [PATCH V2 1/8] scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
Date: Wed, 23 Jul 2025 19:58:49 +0300 [thread overview]
Message-ID: <20250723165856.145750-2-adrian.hunter@intel.com> (raw)
In-Reply-To: <20250723165856.145750-1-adrian.hunter@intel.com>
From: Archana Patni <archana.patni@intel.com>
UFSHCD core disables the UIC completion interrupt when issuing UIC
hibernation commands, and re-enables it afterwards if it was enabled to
start with, refer ufshcd_uic_pwr_ctrl(). For Intel MTL-like host
controllers, accessing the register to re-enable the interrupt disrupts the
state transition.
Use hibern8_notify variant operation to disable the interrupt during the
entire hibernation, thereby preventing the disruption.
Fixes: 4049f7acef3eb ("scsi: ufs: ufs-pci: Add support for Intel MTL")
Cc: stable@vger.kernel.org
Signed-off-by: Archana Patni <archana.patni@intel.com>
---
drivers/ufs/host/ufshcd-pci.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/ufs/host/ufshcd-pci.c b/drivers/ufs/host/ufshcd-pci.c
index 996387906aa1..af1c272eef1c 100644
--- a/drivers/ufs/host/ufshcd-pci.c
+++ b/drivers/ufs/host/ufshcd-pci.c
@@ -216,6 +216,32 @@ static int ufs_intel_lkf_apply_dev_quirks(struct ufs_hba *hba)
return ret;
}
+static void ufs_intel_ctrl_uic_compl(struct ufs_hba *hba, bool enable)
+{
+ u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
+
+ if (enable)
+ set |= UIC_COMMAND_COMPL;
+ else
+ set &= ~UIC_COMMAND_COMPL;
+ ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE);
+}
+
+static void ufs_intel_mtl_h8_notify(struct ufs_hba *hba,
+ enum uic_cmd_dme cmd,
+ enum ufs_notify_change_status status)
+{
+ /*
+ * Disable UIC COMPL INTR to prevent access to UFSHCI after
+ * checking HCS.UPMCRS
+ */
+ if (status == PRE_CHANGE && cmd == UIC_CMD_DME_HIBER_ENTER)
+ ufs_intel_ctrl_uic_compl(hba, false);
+
+ if (status == POST_CHANGE && cmd == UIC_CMD_DME_HIBER_EXIT)
+ ufs_intel_ctrl_uic_compl(hba, true);
+}
+
#define INTEL_ACTIVELTR 0x804
#define INTEL_IDLELTR 0x808
@@ -533,6 +559,7 @@ static struct ufs_hba_variant_ops ufs_intel_mtl_hba_vops = {
.init = ufs_intel_mtl_init,
.exit = ufs_intel_common_exit,
.hce_enable_notify = ufs_intel_hce_enable_notify,
+ .hibern8_notify = ufs_intel_mtl_h8_notify,
.link_startup_notify = ufs_intel_link_startup_notify,
.resume = ufs_intel_resume,
.device_reset = ufs_intel_device_reset,
--
2.48.1
next prev parent reply other threads:[~2025-07-23 16:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-23 16:58 [PATCH V2 0/8] scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers Adrian Hunter
2025-07-23 16:58 ` Adrian Hunter [this message]
2025-07-23 16:58 ` [PATCH V2 2/8] scsi: ufs: ufs-pci: Fix default runtime and system PM levels Adrian Hunter
2025-07-23 16:58 ` [PATCH V2 3/8] scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back Adrian Hunter
2025-07-23 16:58 ` [PATCH V2 4/8] scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr() Adrian Hunter
2025-07-23 16:58 ` [PATCH V2 5/8] scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd() Adrian Hunter
2025-07-23 16:58 ` [PATCH V2 6/8] scsi: ufs: core: Set and clear UIC Completion interrupt as needed Adrian Hunter
2025-07-23 16:58 ` [PATCH V2 7/8] scsi: ufs: core: Do not write interrupt enable register unnecessarily Adrian Hunter
2025-07-23 16:58 ` [PATCH V2 8/8] scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL Adrian Hunter
2025-07-23 17:14 ` [PATCH V2 0/8] scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers Bart Van Assche
2025-07-25 2:46 ` Martin K. Petersen
2025-07-31 4:44 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250723165856.145750-2-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=archana.patni@intel.com \
--cc=avri.altman@sandisk.com \
--cc=bvanassche@acm.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox