* [PATCH v4 1/5] scsi: Rename .slave_alloc() and .slave_destroy()
2024-10-22 18:07 [PATCH v4 0/5] Replace the "slave_*" function names Bart Van Assche
@ 2024-10-22 18:07 ` Bart Van Assche
2024-10-22 18:07 ` [PATCH v4 2/5] scsi: Rename .device_configure() into .sdev_configure() Bart Van Assche
` (5 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Bart Van Assche @ 2024-10-22 18:07 UTC (permalink / raw)
To: Martin K . Petersen
Cc: Damien Le Moal, Randy Dunlap, linux-scsi, Bart Van Assche,
Niklas Cassel, Takashi Sakamoto, Sathya Prakash, Sreekanth Reddy,
Suganath Prabu Subramani, Steffen Maier, Benjamin Block,
Heiko Carstens, Vasily Gorbik, Alexander Gordeev,
James E.J. Bottomley, Hannes Reinecke, Anil Gurumurthy,
Sudarsana Kalluru, Saurav Kashyap, Javed Hasan,
GR-QLogic-Storage-Upstream, Oliver Neukum, Ali Akcaagac,
Jamie Lenehan, Satish Kharat, Sesidhar Baddela, Karan Tilak Kumar,
Yihang Li, Don Brace, Tyrel Datwyler, Michael Ellerman,
Brian King, James Smart, Dick Kennedy, Kashyap Desai,
Sumit Saxena, Shivasharan S, Chandrakanth patil, Nilesh Javali,
Manish Rangankar, K. Y. Srinivasan, Haiyang Zhang, Wei Liu,
Dexuan Cui, Matthew Wilcox, Michael S. Tsirkin, Jason Wang,
Juergen Gross, Stefano Stabellini, Greg Kroah-Hartman, Alan Stern,
Geoff Levand, Khalid Aziz, John Garry, Peter Wang,
Manivannan Sadhasivam, Avri Altman, Andrew Halaney, Bean Huo,
Maramaina Naresh, Bao D. Nguyen
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/ata/libata-scsi.c | 12 ++++++------
drivers/firewire/sbp2.c | 4 ++--
drivers/message/fusion/mptfc.c | 12 ++++++------
drivers/message/fusion/mptsas.c | 8 ++++----
drivers/message/fusion/mptscsih.c | 6 +++---
drivers/message/fusion/mptscsih.h | 2 +-
drivers/message/fusion/mptspi.c | 12 ++++++------
drivers/s390/scsi/zfcp_scsi.c | 10 +++++-----
drivers/s390/scsi/zfcp_sysfs.c | 2 +-
drivers/s390/scsi/zfcp_unit.c | 2 +-
drivers/scsi/53c700.c | 12 ++++++------
drivers/scsi/aic7xxx/aic79xx_osm.c | 4 ++--
drivers/scsi/aic7xxx/aic7xxx_osm.c | 4 ++--
drivers/scsi/bfa/bfad_im.c | 20 ++++++++++----------
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +-
drivers/scsi/csiostor/csio_scsi.c | 12 ++++++------
drivers/scsi/dc395x.c | 12 ++++++------
drivers/scsi/esp_scsi.c | 8 ++++----
drivers/scsi/fcoe/fcoe.c | 2 +-
drivers/scsi/fnic/fnic_main.c | 4 ++--
drivers/scsi/hisi_sas/hisi_sas.h | 2 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 6 +++---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
drivers/scsi/hpsa.c | 12 ++++++------
drivers/scsi/ibmvscsi/ibmvfc.c | 6 +++---
drivers/scsi/ipr.c | 12 ++++++------
drivers/scsi/libfc/fc_fcp.c | 6 +++---
drivers/scsi/libsas/sas_scsi_host.c | 4 ++--
drivers/scsi/lpfc/lpfc_scsi.c | 22 +++++++++++-----------
drivers/scsi/megaraid/megaraid_sas_base.c | 8 ++++----
drivers/scsi/mpi3mr/mpi3mr_os.c | 12 ++++++------
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 ++++++++--------
drivers/scsi/myrb.c | 16 ++++++++--------
drivers/scsi/myrs.c | 8 ++++----
drivers/scsi/ncr53c8xx.c | 4 ++--
drivers/scsi/pmcraid.c | 14 +++++++-------
drivers/scsi/qla2xxx/qla_os.c | 8 ++++----
drivers/scsi/qla4xxx/ql4_os.c | 6 +++---
drivers/scsi/scsi_debug.c | 12 ++++++------
drivers/scsi/scsi_scan.c | 8 ++++----
drivers/scsi/scsi_sysfs.c | 4 ++--
drivers/scsi/smartpqi/smartpqi_init.c | 8 ++++----
drivers/scsi/snic/snic_main.c | 6 +++---
drivers/scsi/storvsc_drv.c | 2 +-
drivers/scsi/sym53c8xx_2/sym_glue.c | 10 +++++-----
drivers/scsi/virtio_scsi.c | 2 +-
drivers/scsi/xen-scsifront.c | 4 ++--
drivers/staging/rts5208/rtsx.c | 4 ++--
drivers/ufs/core/ufshcd.c | 12 ++++++------
drivers/usb/image/microtek.c | 4 ++--
drivers/usb/storage/scsiglue.c | 6 +++---
drivers/usb/storage/uas.c | 4 ++--
include/linux/libata.h | 8 ++++----
include/scsi/libfc.h | 2 +-
include/scsi/libsas.h | 4 ++--
include/scsi/scsi_device.h | 4 ++--
include/scsi/scsi_host.h | 16 ++++++++--------
59 files changed, 219 insertions(+), 219 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a4aedf7e1775..27cde1759011 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1133,7 +1133,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
}
/**
- * ata_scsi_slave_alloc - Early setup of SCSI device
+ * ata_scsi_sdev_init - Early setup of SCSI device
* @sdev: SCSI device to examine
*
* This is called from scsi_alloc_sdev() when the scsi device
@@ -1143,7 +1143,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct queue_limits *lim,
* Defined by SCSI layer. We don't really care.
*/
-int ata_scsi_slave_alloc(struct scsi_device *sdev)
+int ata_scsi_sdev_init(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct device_link *link;
@@ -1166,7 +1166,7 @@ int ata_scsi_slave_alloc(struct scsi_device *sdev)
return 0;
}
-EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
+EXPORT_SYMBOL_GPL(ata_scsi_sdev_init);
/**
* ata_scsi_device_configure - Set SCSI device attributes
@@ -1195,7 +1195,7 @@ int ata_scsi_device_configure(struct scsi_device *sdev,
EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
/**
- * ata_scsi_slave_destroy - SCSI device is about to be destroyed
+ * ata_scsi_sdev_destroy - SCSI device is about to be destroyed
* @sdev: SCSI device to be destroyed
*
* @sdev is about to be destroyed for hot/warm unplugging. If
@@ -1208,7 +1208,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
* LOCKING:
* Defined by SCSI layer. We don't really care.
*/
-void ata_scsi_slave_destroy(struct scsi_device *sdev)
+void ata_scsi_sdev_destroy(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
unsigned long flags;
@@ -1228,7 +1228,7 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
kfree(sdev->dma_drain_buf);
}
-EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
+EXPORT_SYMBOL_GPL(ata_scsi_sdev_destroy);
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 827dee0f57dd..4937df12c3fb 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1490,7 +1490,7 @@ static int sbp2_scsi_queuecommand(struct Scsi_Host *shost,
return retval;
}
-static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
+static int sbp2_scsi_sdev_init(struct scsi_device *sdev)
{
struct sbp2_logical_unit *lu = sdev->hostdata;
@@ -1590,7 +1590,7 @@ static const struct scsi_host_template scsi_driver_template = {
.name = "SBP-2 IEEE-1394",
.proc_name = "sbp2",
.queuecommand = sbp2_scsi_queuecommand,
- .slave_alloc = sbp2_scsi_slave_alloc,
+ .sdev_init = sbp2_scsi_sdev_init,
.device_configure = sbp2_scsi_device_configure,
.eh_abort_handler = sbp2_scsi_abort,
.this_id = -1,
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 91242f26defb..f034ebacf974 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -96,7 +96,7 @@ static u8 mptfcTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
static u8 mptfcInternalCtx = MPT_MAX_PROTOCOL_DRIVERS;
static int mptfc_target_alloc(struct scsi_target *starget);
-static int mptfc_slave_alloc(struct scsi_device *sdev);
+static int mptfc_sdev_init(struct scsi_device *sdev);
static int mptfc_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt);
static void mptfc_target_destroy(struct scsi_target *starget);
static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout);
@@ -113,10 +113,10 @@ static const struct scsi_host_template mptfc_driver_template = {
.info = mptscsih_info,
.queuecommand = mptfc_qcmd,
.target_alloc = mptfc_target_alloc,
- .slave_alloc = mptfc_slave_alloc,
+ .sdev_init = mptfc_sdev_init,
.slave_configure = mptscsih_slave_configure,
.target_destroy = mptfc_target_destroy,
- .slave_destroy = mptscsih_slave_destroy,
+ .sdev_destroy = mptscsih_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = mptfc_abort,
@@ -503,7 +503,7 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
/*
* if already mapped, remap here. If not mapped,
* target_alloc will allocate vtarget and map,
- * slave_alloc will fill in vdevice from vtarget.
+ * sdev_init will fill in vdevice from vtarget.
*/
if (ri->starget) {
vtarget = ri->starget->hostdata;
@@ -631,7 +631,7 @@ mptfc_dump_lun_info(MPT_ADAPTER *ioc, struct fc_rport *rport, struct scsi_device
* Init memory once per LUN.
*/
static int
-mptfc_slave_alloc(struct scsi_device *sdev)
+mptfc_sdev_init(struct scsi_device *sdev)
{
MPT_SCSI_HOST *hd;
VirtTarget *vtarget;
@@ -651,7 +651,7 @@ mptfc_slave_alloc(struct scsi_device *sdev)
vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdevice) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+ printk(MYIOC_s_ERR_FMT "sdev_init kmalloc(%zd) FAILED!\n",
ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index a0bcb0864ecd..ea9d0e6e7f08 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1867,7 +1867,7 @@ mptsas_target_destroy(struct scsi_target *starget)
static int
-mptsas_slave_alloc(struct scsi_device *sdev)
+mptsas_sdev_init(struct scsi_device *sdev)
{
struct Scsi_Host *host = sdev->host;
MPT_SCSI_HOST *hd = shost_priv(host);
@@ -1880,7 +1880,7 @@ mptsas_slave_alloc(struct scsi_device *sdev)
vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdevice) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n",
+ printk(MYIOC_s_ERR_FMT "sdev_init kzalloc(%zd) FAILED!\n",
ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
@@ -2005,10 +2005,10 @@ static const struct scsi_host_template mptsas_driver_template = {
.info = mptscsih_info,
.queuecommand = mptsas_qcmd,
.target_alloc = mptsas_target_alloc,
- .slave_alloc = mptsas_slave_alloc,
+ .sdev_init = mptsas_sdev_init,
.slave_configure = mptsas_slave_configure,
.target_destroy = mptsas_target_destroy,
- .slave_destroy = mptscsih_slave_destroy,
+ .sdev_destroy = mptscsih_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_timed_out = mptsas_eh_timed_out,
.eh_abort_handler = mptscsih_abort,
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 6c3f25cc33ff..50ea4ee65d5c 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -1071,7 +1071,7 @@ EXPORT_SYMBOL(mptscsih_flush_running_cmds);
*
* Returns: None.
*
- * Called from slave_destroy.
+ * Called from sdev_destroy.
*/
static void
mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
@@ -2331,7 +2331,7 @@ EXPORT_SYMBOL(mptscsih_raid_id_to_num);
* Called if no device present or device being unloaded
*/
void
-mptscsih_slave_destroy(struct scsi_device *sdev)
+mptscsih_sdev_destroy(struct scsi_device *sdev)
{
struct Scsi_Host *host = sdev->host;
MPT_SCSI_HOST *hd = shost_priv(host);
@@ -3302,7 +3302,7 @@ EXPORT_SYMBOL(mptscsih_resume);
EXPORT_SYMBOL(mptscsih_show_info);
EXPORT_SYMBOL(mptscsih_info);
EXPORT_SYMBOL(mptscsih_qcmd);
-EXPORT_SYMBOL(mptscsih_slave_destroy);
+EXPORT_SYMBOL(mptscsih_sdev_destroy);
EXPORT_SYMBOL(mptscsih_slave_configure);
EXPORT_SYMBOL(mptscsih_abort);
EXPORT_SYMBOL(mptscsih_dev_reset);
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index e3d92c392673..9f1cde8e76a8 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -116,7 +116,7 @@ extern const char * mptscsih_info(struct Scsi_Host *SChost);
extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt);
extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
u8 id, u64 lun, int ctx2abort, ulong timeout);
-extern void mptscsih_slave_destroy(struct scsi_device *device);
+extern void mptscsih_sdev_destroy(struct scsi_device *device);
extern int mptscsih_slave_configure(struct scsi_device *device);
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
extern int mptscsih_dev_reset(struct scsi_cmnd * SCpnt);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 574b882c9a85..09828c34f8fb 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -713,7 +713,7 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
mptspi_read_parameters(sdev->sdev_target);
}
-static int mptspi_slave_alloc(struct scsi_device *sdev)
+static int mptspi_sdev_init(struct scsi_device *sdev)
{
MPT_SCSI_HOST *hd = shost_priv(sdev->host);
VirtTarget *vtarget;
@@ -727,7 +727,7 @@ static int mptspi_slave_alloc(struct scsi_device *sdev)
vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdevice) {
- printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+ printk(MYIOC_s_ERR_FMT "sdev_init kmalloc(%zd) FAILED!\n",
ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
@@ -799,7 +799,7 @@ mptspi_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt)
return mptscsih_qcmd(SCpnt);
}
-static void mptspi_slave_destroy(struct scsi_device *sdev)
+static void mptspi_sdev_destroy(struct scsi_device *sdev)
{
struct scsi_target *starget = scsi_target(sdev);
VirtTarget *vtarget = starget->hostdata;
@@ -817,7 +817,7 @@ static void mptspi_slave_destroy(struct scsi_device *sdev)
mptspi_write_spi_device_pg1(starget, &pg1);
}
- mptscsih_slave_destroy(sdev);
+ mptscsih_sdev_destroy(sdev);
}
static const struct scsi_host_template mptspi_driver_template = {
@@ -828,10 +828,10 @@ static const struct scsi_host_template mptspi_driver_template = {
.info = mptscsih_info,
.queuecommand = mptspi_qcmd,
.target_alloc = mptspi_target_alloc,
- .slave_alloc = mptspi_slave_alloc,
+ .sdev_init = mptspi_sdev_init,
.slave_configure = mptspi_slave_configure,
.target_destroy = mptspi_target_destroy,
- .slave_destroy = mptspi_slave_destroy,
+ .sdev_destroy = mptspi_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
.eh_device_reset_handler = mptscsih_dev_reset,
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index b2a8cd792266..c9cb9db8c2ee 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -37,11 +37,11 @@ static bool allow_lun_scan = true;
module_param(allow_lun_scan, bool, 0600);
MODULE_PARM_DESC(allow_lun_scan, "For NPIV, scan and attach all storage LUNs");
-static void zfcp_scsi_slave_destroy(struct scsi_device *sdev)
+static void zfcp_scsi_sdev_destroy(struct scsi_device *sdev)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
- /* if previous slave_alloc returned early, there is nothing to do */
+ /* if previous sdev_init returned early, there is nothing to do */
if (!zfcp_sdev->port)
return;
@@ -110,7 +110,7 @@ int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
return ret;
}
-static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
+static int zfcp_scsi_sdev_init(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
struct zfcp_adapter *adapter =
@@ -427,9 +427,9 @@ static const struct scsi_host_template zfcp_scsi_host_template = {
.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
.eh_target_reset_handler = zfcp_scsi_eh_target_reset_handler,
.eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler,
- .slave_alloc = zfcp_scsi_slave_alloc,
+ .sdev_init = zfcp_scsi_sdev_init,
.slave_configure = zfcp_scsi_slave_configure,
- .slave_destroy = zfcp_scsi_slave_destroy,
+ .sdev_destroy = zfcp_scsi_sdev_destroy,
.change_queue_depth = scsi_change_queue_depth,
.host_reset = zfcp_scsi_sysfs_host_reset,
.proc_name = "zfcp",
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index cb67fa80fb12..06a3d8c9d4d8 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -284,7 +284,7 @@ static bool zfcp_sysfs_port_in_use(struct zfcp_port *const port)
goto unlock_host_lock;
}
- /* port is about to be removed, so no more unit_add or slave_alloc */
+ /* port is about to be removed, so no more unit_add or sdev_init */
zfcp_sysfs_port_set_removing(port);
in_use = false;
diff --git a/drivers/s390/scsi/zfcp_unit.c b/drivers/s390/scsi/zfcp_unit.c
index 60f2a04f0869..4ef2a635d34f 100644
--- a/drivers/s390/scsi/zfcp_unit.c
+++ b/drivers/s390/scsi/zfcp_unit.c
@@ -170,7 +170,7 @@ int zfcp_unit_add(struct zfcp_port *port, u64 fcp_lun)
write_unlock_irq(&port->unit_list_lock);
/*
* lock order: shost->scan_mutex before zfcp_sysfs_port_units_mutex
- * due to zfcp_unit_scsi_scan() => zfcp_scsi_slave_alloc()
+ * due to zfcp_unit_scsi_scan() => zfcp_scsi_sdev_init()
*/
mutex_unlock(&zfcp_sysfs_port_units_mutex);
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 85439e976143..71c1d25f93b1 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -158,9 +158,9 @@ STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
-STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt);
+STATIC int NCR_700_sdev_init(struct scsi_device *SDpnt);
STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
-STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
+STATIC void NCR_700_sdev_destroy(struct scsi_device *SDpnt);
static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
STATIC const struct attribute_group *NCR_700_dev_groups[];
@@ -331,8 +331,8 @@ NCR_700_detect(struct scsi_host_template *tpnt,
tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN;
tpnt->slave_configure = NCR_700_slave_configure;
- tpnt->slave_destroy = NCR_700_slave_destroy;
- tpnt->slave_alloc = NCR_700_slave_alloc;
+ tpnt->sdev_destroy = NCR_700_sdev_destroy;
+ tpnt->sdev_init = NCR_700_sdev_init;
tpnt->change_queue_depth = NCR_700_change_queue_depth;
if(tpnt->name == NULL)
@@ -2017,7 +2017,7 @@ NCR_700_set_offset(struct scsi_target *STp, int offset)
}
STATIC int
-NCR_700_slave_alloc(struct scsi_device *SDp)
+NCR_700_sdev_init(struct scsi_device *SDp)
{
SDp->hostdata = kzalloc(sizeof(struct NCR_700_Device_Parameters),
GFP_KERNEL);
@@ -2052,7 +2052,7 @@ NCR_700_slave_configure(struct scsi_device *SDp)
}
STATIC void
-NCR_700_slave_destroy(struct scsi_device *SDp)
+NCR_700_sdev_destroy(struct scsi_device *SDp)
{
kfree(SDp->hostdata);
SDp->hostdata = NULL;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 4202059815a0..2a137629e48d 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -672,7 +672,7 @@ ahd_linux_target_destroy(struct scsi_target *starget)
}
static int
-ahd_linux_slave_alloc(struct scsi_device *sdev)
+ahd_linux_sdev_init(struct scsi_device *sdev)
{
struct ahd_softc *ahd =
*((struct ahd_softc **)sdev->host->hostdata);
@@ -906,7 +906,7 @@ struct scsi_host_template aic79xx_driver_template = {
.this_id = -1,
.max_sectors = 8192,
.cmd_per_lun = 2,
- .slave_alloc = ahd_linux_slave_alloc,
+ .sdev_init = ahd_linux_sdev_init,
.slave_configure = ahd_linux_slave_configure,
.target_alloc = ahd_linux_target_alloc,
.target_destroy = ahd_linux_target_destroy,
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index b0c4f2345321..9066ab2ef6e3 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -632,7 +632,7 @@ ahc_linux_target_destroy(struct scsi_target *starget)
}
static int
-ahc_linux_slave_alloc(struct scsi_device *sdev)
+ahc_linux_sdev_init(struct scsi_device *sdev)
{
struct ahc_softc *ahc =
*((struct ahc_softc **)sdev->host->hostdata);
@@ -791,7 +791,7 @@ struct scsi_host_template aic7xxx_driver_template = {
.this_id = -1,
.max_sectors = 8192,
.cmd_per_lun = 2,
- .slave_alloc = ahc_linux_slave_alloc,
+ .sdev_init = ahc_linux_sdev_init,
.slave_configure = ahc_linux_slave_configure,
.target_alloc = ahc_linux_target_alloc,
.target_destroy = ahc_linux_target_destroy,
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 66fb701401de..5729f429ed8b 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -25,7 +25,7 @@ struct scsi_transport_template *bfad_im_scsi_transport_template;
struct scsi_transport_template *bfad_im_scsi_vport_transport_template;
static void bfad_im_itnim_work_handler(struct work_struct *work);
static int bfad_im_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmnd);
-static int bfad_im_slave_alloc(struct scsi_device *sdev);
+static int bfad_im_sdev_init(struct scsi_device *sdev);
static void bfad_im_fc_rport_add(struct bfad_im_port_s *im_port,
struct bfad_itnim_s *itnim);
@@ -404,10 +404,10 @@ bfad_im_reset_target_handler(struct scsi_cmnd *cmnd)
}
/*
- * Scsi_Host template entry slave_destroy.
+ * Scsi_Host template entry sdev_destroy.
*/
static void
-bfad_im_slave_destroy(struct scsi_device *sdev)
+bfad_im_sdev_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
return;
@@ -800,9 +800,9 @@ struct scsi_host_template bfad_im_scsi_host_template = {
.eh_device_reset_handler = bfad_im_reset_lun_handler,
.eh_target_reset_handler = bfad_im_reset_target_handler,
- .slave_alloc = bfad_im_slave_alloc,
+ .sdev_init = bfad_im_sdev_init,
.slave_configure = bfad_im_slave_configure,
- .slave_destroy = bfad_im_slave_destroy,
+ .sdev_destroy = bfad_im_sdev_destroy,
.this_id = -1,
.sg_tablesize = BFAD_IO_MAX_SGE,
@@ -823,9 +823,9 @@ struct scsi_host_template bfad_im_vport_template = {
.eh_device_reset_handler = bfad_im_reset_lun_handler,
.eh_target_reset_handler = bfad_im_reset_target_handler,
- .slave_alloc = bfad_im_slave_alloc,
+ .sdev_init = bfad_im_sdev_init,
.slave_configure = bfad_im_slave_configure,
- .slave_destroy = bfad_im_slave_destroy,
+ .sdev_destroy = bfad_im_sdev_destroy,
.this_id = -1,
.sg_tablesize = BFAD_IO_MAX_SGE,
@@ -915,7 +915,7 @@ bfad_get_itnim(struct bfad_im_port_s *im_port, int id)
}
/*
- * Function is invoked from the SCSI Host Template slave_alloc() entry point.
+ * Function is invoked from the SCSI Host Template sdev_init() entry point.
* Has the logic to query the LUN Mask database to check if this LUN needs to
* be made visible to the SCSI mid-layer or not.
*
@@ -946,10 +946,10 @@ bfad_im_check_if_make_lun_visible(struct scsi_device *sdev,
}
/*
- * Scsi_Host template entry slave_alloc
+ * Scsi_Host template entry sdev_init
*/
static int
-bfad_im_slave_alloc(struct scsi_device *sdev)
+bfad_im_sdev_init(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
struct bfad_itnim_data_s *itnim_data;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index f49783b89d04..938e38a01326 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -2951,7 +2951,7 @@ static struct scsi_host_template bnx2fc_shost_template = {
.eh_device_reset_handler = bnx2fc_eh_device_reset, /* lun reset */
.eh_target_reset_handler = bnx2fc_eh_target_reset, /* tgt reset */
.eh_host_reset_handler = fc_eh_host_reset,
- .slave_alloc = fc_slave_alloc,
+ .sdev_init = fc_sdev_init,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.cmd_per_lun = 3,
diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
index 05e1a63e00c3..fb6b0c8e22e0 100644
--- a/drivers/scsi/csiostor/csio_scsi.c
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -2224,7 +2224,7 @@ csio_eh_lun_reset_handler(struct scsi_cmnd *cmnd)
}
static int
-csio_slave_alloc(struct scsi_device *sdev)
+csio_sdev_init(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -2244,7 +2244,7 @@ csio_slave_configure(struct scsi_device *sdev)
}
static void
-csio_slave_destroy(struct scsi_device *sdev)
+csio_sdev_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
}
@@ -2276,9 +2276,9 @@ struct scsi_host_template csio_fcoe_shost_template = {
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = csio_eh_abort_handler,
.eh_device_reset_handler = csio_eh_lun_reset_handler,
- .slave_alloc = csio_slave_alloc,
+ .sdev_init = csio_sdev_init,
.slave_configure = csio_slave_configure,
- .slave_destroy = csio_slave_destroy,
+ .sdev_destroy = csio_sdev_destroy,
.scan_finished = csio_scan_finished,
.this_id = -1,
.sg_tablesize = CSIO_SCSI_MAX_SGE,
@@ -2295,9 +2295,9 @@ struct scsi_host_template csio_fcoe_shost_vport_template = {
.eh_timed_out = fc_eh_timed_out,
.eh_abort_handler = csio_eh_abort_handler,
.eh_device_reset_handler = csio_eh_lun_reset_handler,
- .slave_alloc = csio_slave_alloc,
+ .sdev_init = csio_sdev_init,
.slave_configure = csio_slave_configure,
- .slave_destroy = csio_slave_destroy,
+ .sdev_destroy = csio_sdev_destroy,
.scan_finished = csio_scan_finished,
.this_id = -1,
.sg_tablesize = CSIO_SCSI_MAX_SGE,
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index d108a86e196e..235ebc851ca9 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3715,13 +3715,13 @@ static void adapter_remove_and_free_all_devices(struct AdapterCtlBlk* acb)
/**
- * dc395x_slave_alloc - Called by the scsi mid layer to tell us about a new
+ * dc395x_sdev_init - Called by the scsi mid layer to tell us about a new
* scsi device that we need to deal with. We allocate a new device and then
* insert that device into the adapters device list.
*
* @scsi_device: The new scsi device that we need to handle.
**/
-static int dc395x_slave_alloc(struct scsi_device *scsi_device)
+static int dc395x_sdev_init(struct scsi_device *scsi_device)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
struct DeviceCtlBlk *dcb;
@@ -3736,12 +3736,12 @@ static int dc395x_slave_alloc(struct scsi_device *scsi_device)
/**
- * dc395x_slave_destroy - Called by the scsi mid layer to tell us about a
+ * dc395x_sdev_destroy - Called by the scsi mid layer to tell us about a
* device that is going away.
*
* @scsi_device: The new scsi device that we need to handle.
**/
-static void dc395x_slave_destroy(struct scsi_device *scsi_device)
+static void dc395x_sdev_destroy(struct scsi_device *scsi_device)
{
struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)scsi_device->host->hostdata;
struct DeviceCtlBlk *dcb = find_dcb(acb, scsi_device->id, scsi_device->lun);
@@ -4547,8 +4547,8 @@ static const struct scsi_host_template dc395x_driver_template = {
.show_info = dc395x_show_info,
.name = DC395X_BANNER " " DC395X_VERSION,
.queuecommand = dc395x_queue_command,
- .slave_alloc = dc395x_slave_alloc,
- .slave_destroy = dc395x_slave_destroy,
+ .sdev_init = dc395x_sdev_init,
+ .sdev_destroy = dc395x_sdev_destroy,
.can_queue = DC395x_MAX_CAN_QUEUE,
.this_id = 7,
.sg_tablesize = DC395x_MAX_SG_TABLESIZE,
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 0175d2282b45..d14a3383abb0 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2441,7 +2441,7 @@ static void esp_target_destroy(struct scsi_target *starget)
tp->starget = NULL;
}
-static int esp_slave_alloc(struct scsi_device *dev)
+static int esp_sdev_init(struct scsi_device *dev)
{
struct esp *esp = shost_priv(dev->host);
struct esp_target_data *tp = &esp->target[dev->id];
@@ -2479,7 +2479,7 @@ static int esp_slave_configure(struct scsi_device *dev)
return 0;
}
-static void esp_slave_destroy(struct scsi_device *dev)
+static void esp_sdev_destroy(struct scsi_device *dev)
{
struct esp_lun_data *lp = dev->hostdata;
@@ -2667,9 +2667,9 @@ const struct scsi_host_template scsi_esp_template = {
.queuecommand = esp_queuecommand,
.target_alloc = esp_target_alloc,
.target_destroy = esp_target_destroy,
- .slave_alloc = esp_slave_alloc,
+ .sdev_init = esp_sdev_init,
.slave_configure = esp_slave_configure,
- .slave_destroy = esp_slave_destroy,
+ .sdev_destroy = esp_sdev_destroy,
.eh_abort_handler = esp_eh_abort_handler,
.eh_bus_reset_handler = esp_eh_bus_reset_handler,
.eh_host_reset_handler = esp_eh_host_reset_handler,
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 39aec710660c..038e38578676 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -269,7 +269,7 @@ static const struct scsi_host_template fcoe_shost_template = {
.eh_abort_handler = fc_eh_abort,
.eh_device_reset_handler = fc_eh_device_reset,
.eh_host_reset_handler = fc_eh_host_reset,
- .slave_alloc = fc_slave_alloc,
+ .sdev_init = fc_sdev_init,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.cmd_per_lun = 3,
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 0044717d4486..033e132d8fd2 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -87,7 +87,7 @@ static struct libfc_function_template fnic_transport_template = {
.exch_mgr_reset = fnic_exch_mgr_reset
};
-static int fnic_slave_alloc(struct scsi_device *sdev)
+static int fnic_sdev_init(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -106,7 +106,7 @@ static const struct scsi_host_template fnic_host_template = {
.eh_abort_handler = fnic_abort_cmd,
.eh_device_reset_handler = fnic_device_reset,
.eh_host_reset_handler = fnic_host_reset,
- .slave_alloc = fnic_slave_alloc,
+ .sdev_init = fnic_sdev_init,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.cmd_per_lun = 3,
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index a44768bceb9a..fee3cadfde1e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -646,7 +646,7 @@ extern void hisi_sas_remove(struct platform_device *pdev);
int hisi_sas_device_configure(struct scsi_device *sdev,
struct queue_limits *lim);
-extern int hisi_sas_slave_alloc(struct scsi_device *sdev);
+extern int hisi_sas_sdev_init(struct scsi_device *sdev);
extern int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time);
extern void hisi_sas_scan_start(struct Scsi_Host *shost);
extern int hisi_sas_host_reset(struct Scsi_Host *shost, int reset_type);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 53cb15f6714b..a80d8b2a9941 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -805,13 +805,13 @@ static int hisi_sas_init_device(struct domain_device *device)
return rc;
}
-int hisi_sas_slave_alloc(struct scsi_device *sdev)
+int hisi_sas_sdev_init(struct scsi_device *sdev)
{
struct domain_device *ddev = sdev_to_domain_dev(sdev);
struct hisi_sas_device *sas_dev = ddev->lldd_dev;
int rc;
- rc = sas_slave_alloc(sdev);
+ rc = sas_sdev_init(sdev);
if (rc)
return rc;
@@ -821,7 +821,7 @@ int hisi_sas_slave_alloc(struct scsi_device *sdev)
sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
return 0;
}
-EXPORT_SYMBOL_GPL(hisi_sas_slave_alloc);
+EXPORT_SYMBOL_GPL(hisi_sas_sdev_init);
static int hisi_sas_dev_found(struct domain_device *device)
{
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 70bba55bc5d0..71e1353e9eaa 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1757,7 +1757,7 @@ static const struct scsi_host_template sht_v1_hw = {
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
- .slave_alloc = hisi_sas_slave_alloc,
+ .sdev_init = hisi_sas_sdev_init,
.shost_groups = host_v1_hw_groups,
.host_reset = hisi_sas_host_reset,
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index ab6668dc5b77..d28d673ecad0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3589,7 +3589,7 @@ static const struct scsi_host_template sht_v2_hw = {
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
- .slave_alloc = hisi_sas_slave_alloc,
+ .sdev_init = hisi_sas_sdev_init,
.shost_groups = host_v2_hw_groups,
.sdev_groups = sdev_groups_v2_hw,
.host_reset = hisi_sas_host_reset,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 5db931663ae4..5758388508ec 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3342,7 +3342,7 @@ static const struct scsi_host_template sht_v3_hw = {
.map_queues = hisi_sas_map_queues,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.sg_prot_tablesize = HISI_SAS_SGE_PAGE_CNT,
- .slave_alloc = hisi_sas_slave_alloc,
+ .sdev_init = hisi_sas_sdev_init,
.shost_groups = host_v3_hw_groups,
.sdev_groups = sdev_groups_v3_hw,
.tag_alloc_policy = BLK_TAG_ALLOC_RR,
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e044ed09d7e0..eccdec143ad8 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -283,9 +283,9 @@ static int hpsa_scan_finished(struct Scsi_Host *sh,
static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
-static int hpsa_slave_alloc(struct scsi_device *sdev);
+static int hpsa_sdev_init(struct scsi_device *sdev);
static int hpsa_slave_configure(struct scsi_device *sdev);
-static void hpsa_slave_destroy(struct scsi_device *sdev);
+static void hpsa_sdev_destroy(struct scsi_device *sdev);
static void hpsa_update_scsi_devices(struct ctlr_info *h);
static int check_for_unit_attention(struct ctlr_info *h,
@@ -978,9 +978,9 @@ static const struct scsi_host_template hpsa_driver_template = {
.this_id = -1,
.eh_device_reset_handler = hpsa_eh_device_reset_handler,
.ioctl = hpsa_ioctl,
- .slave_alloc = hpsa_slave_alloc,
+ .sdev_init = hpsa_sdev_init,
.slave_configure = hpsa_slave_configure,
- .slave_destroy = hpsa_slave_destroy,
+ .sdev_destroy = hpsa_sdev_destroy,
#ifdef CONFIG_COMPAT
.compat_ioctl = hpsa_compat_ioctl,
#endif
@@ -2107,7 +2107,7 @@ static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
return NULL;
}
-static int hpsa_slave_alloc(struct scsi_device *sdev)
+static int hpsa_sdev_init(struct scsi_device *sdev)
{
struct hpsa_scsi_dev_t *sd = NULL;
unsigned long flags;
@@ -2173,7 +2173,7 @@ static int hpsa_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void hpsa_slave_destroy(struct scsi_device *sdev)
+static void hpsa_sdev_destroy(struct scsi_device *sdev)
{
struct hpsa_scsi_dev_t *hdev = NULL;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index e66c3ef74267..48417615bffe 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3393,7 +3393,7 @@ static int ibmvfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
}
/**
- * ibmvfc_slave_alloc - Setup the device's task set value
+ * ibmvfc_sdev_init - Setup the device's task set value
* @sdev: struct scsi_device device to configure
*
* Set the device's task set value so that error handling works as
@@ -3402,7 +3402,7 @@ static int ibmvfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
* Returns:
* 0 on success / -ENXIO if device does not exist
**/
-static int ibmvfc_slave_alloc(struct scsi_device *sdev)
+static int ibmvfc_sdev_init(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -3696,7 +3696,7 @@ static const struct scsi_host_template driver_template = {
.eh_device_reset_handler = ibmvfc_eh_device_reset_handler,
.eh_target_reset_handler = ibmvfc_eh_target_reset_handler,
.eh_host_reset_handler = ibmvfc_eh_host_reset_handler,
- .slave_alloc = ibmvfc_slave_alloc,
+ .sdev_init = ibmvfc_sdev_init,
.slave_configure = ibmvfc_slave_configure,
.target_alloc = ibmvfc_target_alloc,
.scan_finished = ibmvfc_scan_finished,
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 31cf2d31cceb..41bc54e27896 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4745,13 +4745,13 @@ static struct ipr_resource_entry *ipr_find_sdev(struct scsi_device *sdev)
}
/**
- * ipr_slave_destroy - Unconfigure a SCSI device
+ * ipr_sdev_destroy - Unconfigure a SCSI device
* @sdev: scsi device struct
*
* Return value:
* nothing
**/
-static void ipr_slave_destroy(struct scsi_device *sdev)
+static void ipr_sdev_destroy(struct scsi_device *sdev)
{
struct ipr_resource_entry *res;
struct ipr_ioa_cfg *ioa_cfg;
@@ -4815,7 +4815,7 @@ static int ipr_device_configure(struct scsi_device *sdev,
}
/**
- * ipr_slave_alloc - Prepare for commands to a device.
+ * ipr_sdev_init - Prepare for commands to a device.
* @sdev: scsi device struct
*
* This function saves a pointer to the resource entry
@@ -4826,7 +4826,7 @@ static int ipr_device_configure(struct scsi_device *sdev,
* Return value:
* 0 on success / -ENXIO if device does not exist
**/
-static int ipr_slave_alloc(struct scsi_device *sdev)
+static int ipr_sdev_init(struct scsi_device *sdev)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
@@ -6398,9 +6398,9 @@ static const struct scsi_host_template driver_template = {
.eh_abort_handler = ipr_eh_abort,
.eh_device_reset_handler = ipr_eh_dev_reset,
.eh_host_reset_handler = ipr_eh_host_reset,
- .slave_alloc = ipr_slave_alloc,
+ .sdev_init = ipr_sdev_init,
.device_configure = ipr_device_configure,
- .slave_destroy = ipr_slave_destroy,
+ .sdev_destroy = ipr_sdev_destroy,
.scan_finished = ipr_scan_finished,
.target_destroy = ipr_target_destroy,
.change_queue_depth = ipr_change_queue_depth,
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 80be3a936d92..fd1ef06655cb 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -2222,13 +2222,13 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
EXPORT_SYMBOL(fc_eh_host_reset);
/**
- * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
+ * fc_sdev_init() - Configure the queue depth of a Scsi_Host
* @sdev: The SCSI device that identifies the SCSI host
*
* Configures queue depth based on host's cmd_per_len. If not set
* then we use the libfc default.
*/
-int fc_slave_alloc(struct scsi_device *sdev)
+int fc_sdev_init(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -2238,7 +2238,7 @@ int fc_slave_alloc(struct scsi_device *sdev)
scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
return 0;
}
-EXPORT_SYMBOL(fc_slave_alloc);
+EXPORT_SYMBOL(fc_sdev_init);
/**
* fc_fcp_destroy() - Tear down the FCP layer for a given local port
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index da11d32840e2..e7d5093f7c5d 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -1194,14 +1194,14 @@ void sas_task_abort(struct sas_task *task)
}
EXPORT_SYMBOL_GPL(sas_task_abort);
-int sas_slave_alloc(struct scsi_device *sdev)
+int sas_sdev_init(struct scsi_device *sdev)
{
if (dev_is_sata(sdev_to_domain_dev(sdev)) && sdev->lun)
return -ENXIO;
return 0;
}
-EXPORT_SYMBOL_GPL(sas_slave_alloc);
+EXPORT_SYMBOL_GPL(sas_sdev_init);
void sas_target_destroy(struct scsi_target *starget)
{
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 0eaede8275da..3f408a47a36c 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6226,7 +6226,7 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
+ * lpfc_sdev_init - scsi_host_template sdev_init entry point
* @sdev: Pointer to scsi_device.
*
* This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
@@ -6239,7 +6239,7 @@ lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
* 0 - Success
**/
static int
-lpfc_slave_alloc(struct scsi_device *sdev)
+lpfc_sdev_init(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
@@ -6371,13 +6371,13 @@ lpfc_slave_configure(struct scsi_device *sdev)
}
/**
- * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
+ * lpfc_sdev_destroy - sdev_destroy entry point of SHT data structure
* @sdev: Pointer to scsi_device.
*
* This routine sets @sdev hostatdata filed to null.
**/
static void
-lpfc_slave_destroy(struct scsi_device *sdev)
+lpfc_sdev_destroy(struct scsi_device *sdev)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
@@ -6737,7 +6737,7 @@ lpfc_no_command(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
}
static int
-lpfc_no_slave(struct scsi_device *sdev)
+lpfc_no_sdev(struct scsi_device *sdev)
{
return -ENODEV;
}
@@ -6748,8 +6748,8 @@ struct scsi_host_template lpfc_template_nvme = {
.proc_name = LPFC_DRIVER_NAME,
.info = lpfc_info,
.queuecommand = lpfc_no_command,
- .slave_alloc = lpfc_no_slave,
- .slave_configure = lpfc_no_slave,
+ .sdev_init = lpfc_no_sdev,
+ .slave_configure = lpfc_no_sdev,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = 1,
@@ -6772,9 +6772,9 @@ struct scsi_host_template lpfc_template = {
.eh_device_reset_handler = lpfc_device_reset_handler,
.eh_target_reset_handler = lpfc_target_reset_handler,
.eh_host_reset_handler = lpfc_host_reset_handler,
- .slave_alloc = lpfc_slave_alloc,
+ .sdev_init = lpfc_sdev_init,
.slave_configure = lpfc_slave_configure,
- .slave_destroy = lpfc_slave_destroy,
+ .sdev_destroy = lpfc_sdev_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
@@ -6799,9 +6799,9 @@ struct scsi_host_template lpfc_vport_template = {
.eh_target_reset_handler = lpfc_target_reset_handler,
.eh_bus_reset_handler = NULL,
.eh_host_reset_handler = NULL,
- .slave_alloc = lpfc_slave_alloc,
+ .sdev_init = lpfc_sdev_init,
.slave_configure = lpfc_slave_configure,
- .slave_destroy = lpfc_slave_destroy,
+ .sdev_destroy = lpfc_sdev_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 4ecf5284c0fc..56cb240d9631 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2109,7 +2109,7 @@ static int megasas_device_configure(struct scsi_device *sdev,
return 0;
}
-static int megasas_slave_alloc(struct scsi_device *sdev)
+static int megasas_sdev_init(struct scsi_device *sdev)
{
u16 pd_index = 0, ld_tgt_id;
struct megasas_instance *instance ;
@@ -2154,7 +2154,7 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
return 0;
}
-static void megasas_slave_destroy(struct scsi_device *sdev)
+static void megasas_sdev_destroy(struct scsi_device *sdev)
{
u16 ld_tgt_id;
struct megasas_instance *instance;
@@ -3511,8 +3511,8 @@ static const struct scsi_host_template megasas_template = {
.name = "Avago SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
.device_configure = megasas_device_configure,
- .slave_alloc = megasas_slave_alloc,
- .slave_destroy = megasas_slave_destroy,
+ .sdev_init = megasas_sdev_init,
+ .sdev_destroy = megasas_sdev_destroy,
.queuecommand = megasas_queue_command,
.eh_target_reset_handler = megasas_reset_target,
.eh_abort_handler = megasas_task_abort,
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 5f2f67acf8bf..6b9f453565f2 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -4465,14 +4465,14 @@ static int mpi3mr_scan_finished(struct Scsi_Host *shost,
}
/**
- * mpi3mr_slave_destroy - Slave destroy callback handler
+ * mpi3mr_sdev_destroy - Slave destroy callback handler
* @sdev: SCSI device reference
*
* Cleanup and free per device(lun) private data.
*
* Return: Nothing.
*/
-static void mpi3mr_slave_destroy(struct scsi_device *sdev)
+static void mpi3mr_sdev_destroy(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct mpi3mr_ioc *mrioc;
@@ -4599,14 +4599,14 @@ static int mpi3mr_device_configure(struct scsi_device *sdev,
}
/**
- * mpi3mr_slave_alloc -Slave alloc callback handler
+ * mpi3mr_sdev_init -Slave alloc callback handler
* @sdev: SCSI device reference
*
* Allocate per device(lun) private data and initialize it.
*
* Return: 0 on success -ENOMEM on memory allocation failure.
*/
-static int mpi3mr_slave_alloc(struct scsi_device *sdev)
+static int mpi3mr_sdev_init(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct mpi3mr_ioc *mrioc;
@@ -5062,10 +5062,10 @@ static const struct scsi_host_template mpi3mr_driver_template = {
.proc_name = MPI3MR_DRIVER_NAME,
.queuecommand = mpi3mr_qcmd,
.target_alloc = mpi3mr_target_alloc,
- .slave_alloc = mpi3mr_slave_alloc,
+ .sdev_init = mpi3mr_sdev_init,
.device_configure = mpi3mr_device_configure,
.target_destroy = mpi3mr_target_destroy,
- .slave_destroy = mpi3mr_slave_destroy,
+ .sdev_destroy = mpi3mr_sdev_destroy,
.scan_finished = mpi3mr_scan_finished,
.scan_start = mpi3mr_scan_start,
.change_queue_depth = mpi3mr_change_queue_depth,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 728cced42b0e..f113fba81f02 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2026,14 +2026,14 @@ scsih_target_destroy(struct scsi_target *starget)
}
/**
- * scsih_slave_alloc - device add routine
+ * scsih_sdev_init - device add routine
* @sdev: scsi device struct
*
* Return: 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
static int
-scsih_slave_alloc(struct scsi_device *sdev)
+scsih_sdev_init(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct MPT3SAS_ADAPTER *ioc;
@@ -2108,11 +2108,11 @@ scsih_slave_alloc(struct scsi_device *sdev)
}
/**
- * scsih_slave_destroy - device destroy routine
+ * scsih_sdev_destroy - device destroy routine
* @sdev: scsi device struct
*/
static void
-scsih_slave_destroy(struct scsi_device *sdev)
+scsih_sdev_destroy(struct scsi_device *sdev)
{
struct MPT3SAS_TARGET *sas_target_priv_data;
struct scsi_target *starget;
@@ -11905,10 +11905,10 @@ static const struct scsi_host_template mpt2sas_driver_template = {
.proc_name = MPT2SAS_DRIVER_NAME,
.queuecommand = scsih_qcmd,
.target_alloc = scsih_target_alloc,
- .slave_alloc = scsih_slave_alloc,
+ .sdev_init = scsih_sdev_init,
.device_configure = scsih_device_configure,
.target_destroy = scsih_target_destroy,
- .slave_destroy = scsih_slave_destroy,
+ .sdev_destroy = scsih_sdev_destroy,
.scan_finished = scsih_scan_finished,
.scan_start = scsih_scan_start,
.change_queue_depth = scsih_change_queue_depth,
@@ -11943,10 +11943,10 @@ static const struct scsi_host_template mpt3sas_driver_template = {
.proc_name = MPT3SAS_DRIVER_NAME,
.queuecommand = scsih_qcmd,
.target_alloc = scsih_target_alloc,
- .slave_alloc = scsih_slave_alloc,
+ .sdev_init = scsih_sdev_init,
.device_configure = scsih_device_configure,
.target_destroy = scsih_target_destroy,
- .slave_destroy = scsih_slave_destroy,
+ .sdev_destroy = scsih_sdev_destroy,
.scan_finished = scsih_scan_finished,
.scan_start = scsih_scan_start,
.change_queue_depth = scsih_change_queue_depth,
diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
index bfc2b835e612..3586830c392c 100644
--- a/drivers/scsi/myrb.c
+++ b/drivers/scsi/myrb.c
@@ -1619,7 +1619,7 @@ static int myrb_queuecommand(struct Scsi_Host *shost,
return myrb_pthru_queuecommand(shost, scmd);
}
-static int myrb_ldev_slave_alloc(struct scsi_device *sdev)
+static int myrb_ldev_sdev_init(struct scsi_device *sdev)
{
struct myrb_hba *cb = shost_priv(sdev->host);
struct myrb_ldev_info *ldev_info;
@@ -1665,7 +1665,7 @@ static int myrb_ldev_slave_alloc(struct scsi_device *sdev)
return 0;
}
-static int myrb_pdev_slave_alloc(struct scsi_device *sdev)
+static int myrb_pdev_sdev_init(struct scsi_device *sdev)
{
struct myrb_hba *cb = shost_priv(sdev->host);
struct myrb_pdev_state *pdev_info;
@@ -1701,7 +1701,7 @@ static int myrb_pdev_slave_alloc(struct scsi_device *sdev)
return 0;
}
-static int myrb_slave_alloc(struct scsi_device *sdev)
+static int myrb_sdev_init(struct scsi_device *sdev)
{
if (sdev->channel > myrb_logical_channel(sdev->host))
return -ENXIO;
@@ -1710,9 +1710,9 @@ static int myrb_slave_alloc(struct scsi_device *sdev)
return -ENXIO;
if (sdev->channel == myrb_logical_channel(sdev->host))
- return myrb_ldev_slave_alloc(sdev);
+ return myrb_ldev_sdev_init(sdev);
- return myrb_pdev_slave_alloc(sdev);
+ return myrb_pdev_sdev_init(sdev);
}
static int myrb_slave_configure(struct scsi_device *sdev)
@@ -1741,7 +1741,7 @@ static int myrb_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void myrb_slave_destroy(struct scsi_device *sdev)
+static void myrb_sdev_destroy(struct scsi_device *sdev)
{
kfree(sdev->hostdata);
}
@@ -2208,9 +2208,9 @@ static const struct scsi_host_template myrb_template = {
.proc_name = "myrb",
.queuecommand = myrb_queuecommand,
.eh_host_reset_handler = myrb_host_reset,
- .slave_alloc = myrb_slave_alloc,
+ .sdev_init = myrb_sdev_init,
.slave_configure = myrb_slave_configure,
- .slave_destroy = myrb_slave_destroy,
+ .sdev_destroy = myrb_sdev_destroy,
.bios_param = myrb_biosparam,
.cmd_size = sizeof(struct myrb_cmdblk),
.shost_groups = myrb_shost_groups,
diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index 3392feb15cb4..2d276e654c27 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -1786,7 +1786,7 @@ static unsigned short myrs_translate_ldev(struct myrs_hba *cs,
return ldev_num;
}
-static int myrs_slave_alloc(struct scsi_device *sdev)
+static int myrs_sdev_init(struct scsi_device *sdev)
{
struct myrs_hba *cs = shost_priv(sdev->host);
unsigned char status;
@@ -1910,7 +1910,7 @@ static int myrs_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void myrs_slave_destroy(struct scsi_device *sdev)
+static void myrs_sdev_destroy(struct scsi_device *sdev)
{
kfree(sdev->hostdata);
}
@@ -1921,9 +1921,9 @@ static const struct scsi_host_template myrs_template = {
.proc_name = "myrs",
.queuecommand = myrs_queuecommand,
.eh_host_reset_handler = myrs_host_reset,
- .slave_alloc = myrs_slave_alloc,
+ .sdev_init = myrs_sdev_init,
.slave_configure = myrs_slave_configure,
- .slave_destroy = myrs_slave_destroy,
+ .sdev_destroy = myrs_sdev_destroy,
.cmd_size = sizeof(struct myrs_cmdblk),
.shost_groups = myrs_shost_groups,
.sdev_groups = myrs_sdev_groups,
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 35869b4f9329..526411dff48f 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -7786,7 +7786,7 @@ static void __init ncr_getclock (struct ncb *np, int mult)
/*===================== LINUX ENTRY POINTS SECTION ==========================*/
-static int ncr53c8xx_slave_alloc(struct scsi_device *device)
+static int ncr53c8xx_sdev_init(struct scsi_device *device)
{
struct Scsi_Host *host = device->host;
struct ncb *np = ((struct host_data *) host->hostdata)->ncb;
@@ -8094,7 +8094,7 @@ struct Scsi_Host * __init ncr_attach(struct scsi_host_template *tpnt,
tpnt->queuecommand = ncr53c8xx_queue_command;
tpnt->slave_configure = ncr53c8xx_slave_configure;
- tpnt->slave_alloc = ncr53c8xx_slave_alloc;
+ tpnt->sdev_init = ncr53c8xx_sdev_init;
tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset;
tpnt->can_queue = SCSI_NCR_CAN_QUEUE;
tpnt->this_id = 7;
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 4c5881917d76..d9e6e75e801c 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -125,7 +125,7 @@ MODULE_DEVICE_TABLE(pci, pmcraid_pci_table);
/**
- * pmcraid_slave_alloc - Prepare for commands to a device
+ * pmcraid_sdev_init - Prepare for commands to a device
* @scsi_dev: scsi device struct
*
* This function is called by mid-layer prior to sending any command to the new
@@ -136,7 +136,7 @@ MODULE_DEVICE_TABLE(pci, pmcraid_pci_table);
* Return value:
* 0 on success / -ENXIO if device does not exist
*/
-static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
+static int pmcraid_sdev_init(struct scsi_device *scsi_dev)
{
struct pmcraid_resource_entry *temp, *res = NULL;
struct pmcraid_instance *pinstance;
@@ -248,17 +248,17 @@ static int pmcraid_device_configure(struct scsi_device *scsi_dev,
}
/**
- * pmcraid_slave_destroy - Unconfigure a SCSI device before removing it
+ * pmcraid_sdev_destroy - Unconfigure a SCSI device before removing it
*
* @scsi_dev: scsi device struct
*
* This is called by mid-layer before removing a device. Pointer assignments
- * done in pmcraid_slave_alloc will be reset to NULL here.
+ * done in pmcraid_sdev_init will be reset to NULL here.
*
* Return value
* none
*/
-static void pmcraid_slave_destroy(struct scsi_device *scsi_dev)
+static void pmcraid_sdev_destroy(struct scsi_device *scsi_dev)
{
struct pmcraid_resource_entry *res;
@@ -3668,9 +3668,9 @@ static const struct scsi_host_template pmcraid_host_template = {
.eh_device_reset_handler = pmcraid_eh_device_reset_handler,
.eh_host_reset_handler = pmcraid_eh_host_reset_handler,
- .slave_alloc = pmcraid_slave_alloc,
+ .sdev_init = pmcraid_sdev_init,
.device_configure = pmcraid_device_configure,
- .slave_destroy = pmcraid_slave_destroy,
+ .sdev_destroy = pmcraid_sdev_destroy,
.change_queue_depth = pmcraid_change_queue_depth,
.can_queue = PMCRAID_MAX_IO_CMD,
.this_id = -1,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7f980e6141c2..686e69d3ec98 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1934,7 +1934,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
}
static int
-qla2xxx_slave_alloc(struct scsi_device *sdev)
+qla2xxx_sdev_init(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
@@ -1957,7 +1957,7 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
}
static void
-qla2xxx_slave_destroy(struct scsi_device *sdev)
+qla2xxx_sdev_destroy(struct scsi_device *sdev)
{
sdev->hostdata = NULL;
}
@@ -8088,8 +8088,8 @@ struct scsi_host_template qla2xxx_driver_template = {
.slave_configure = qla2xxx_slave_configure,
- .slave_alloc = qla2xxx_slave_alloc,
- .slave_destroy = qla2xxx_slave_destroy,
+ .sdev_init = qla2xxx_sdev_init,
+ .sdev_destroy = qla2xxx_sdev_destroy,
.scan_finished = qla2xxx_scan_finished,
.scan_start = qla2xxx_scan_start,
.change_queue_depth = scsi_change_queue_depth,
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index d91f54a6e752..863071f80d39 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -160,7 +160,7 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
-static int qla4xxx_slave_alloc(struct scsi_device *device);
+static int qla4xxx_sdev_init(struct scsi_device *device);
static umode_t qla4_attr_is_visible(int param_type, int param);
static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
@@ -234,7 +234,7 @@ static struct scsi_host_template qla4xxx_driver_template = {
.eh_host_reset_handler = qla4xxx_eh_host_reset,
.eh_timed_out = qla4xxx_eh_cmd_timed_out,
- .slave_alloc = qla4xxx_slave_alloc,
+ .sdev_init = qla4xxx_sdev_init,
.change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
@@ -9052,7 +9052,7 @@ static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha)
}
}
-static int qla4xxx_slave_alloc(struct scsi_device *sdev)
+static int qla4xxx_sdev_init(struct scsi_device *sdev)
{
struct iscsi_cls_session *cls_sess;
struct iscsi_session *sess;
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index d95f417e24c0..8a0951245a94 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -5881,10 +5881,10 @@ static struct sdebug_dev_info *find_build_dev_info(struct scsi_device *sdev)
return open_devip;
}
-static int scsi_debug_slave_alloc(struct scsi_device *sdp)
+static int scsi_debug_sdev_init(struct scsi_device *sdp)
{
if (sdebug_verbose)
- pr_info("slave_alloc <%u %u %u %llu>\n",
+ pr_info("sdev_init <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
return 0;
@@ -5929,14 +5929,14 @@ static int scsi_debug_slave_configure(struct scsi_device *sdp)
return 0;
}
-static void scsi_debug_slave_destroy(struct scsi_device *sdp)
+static void scsi_debug_sdev_destroy(struct scsi_device *sdp)
{
struct sdebug_dev_info *devip =
(struct sdebug_dev_info *)sdp->hostdata;
struct sdebug_err_inject *err;
if (sdebug_verbose)
- pr_info("slave_destroy <%u %u %u %llu>\n",
+ pr_info("sdev_destroy <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (!devip)
@@ -8714,9 +8714,9 @@ static struct scsi_host_template sdebug_driver_template = {
.proc_name = sdebug_proc_name,
.name = "SCSI DEBUG",
.info = scsi_debug_info,
- .slave_alloc = scsi_debug_slave_alloc,
+ .sdev_init = scsi_debug_sdev_init,
.slave_configure = scsi_debug_slave_configure,
- .slave_destroy = scsi_debug_slave_destroy,
+ .sdev_destroy = scsi_debug_sdev_destroy,
.ioctl = scsi_debug_ioctl,
.queuecommand = scsi_debug_queuecommand,
.change_queue_depth = sdebug_change_qdepth,
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index c0b72199b4fa..da8aecc9d304 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -265,7 +265,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
* scsi_alloc_sdev - allocate and setup a scsi_Device
* @starget: which target to allocate a &scsi_device for
* @lun: which lun
- * @hostdata: usually NULL and set by ->slave_alloc instead
+ * @hostdata: usually NULL and set by ->sdev_init instead
*
* Description:
* Allocate, initialize for io, and return a pointer to a scsi_Device.
@@ -312,7 +312,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
sdev->sdev_gendev.parent = get_device(&starget->dev);
sdev->sdev_target = starget;
- /* usually NULL and set by ->slave_alloc instead */
+ /* usually NULL and set by ->sdev_init instead */
sdev->hostdata = hostdata;
/* if the device needs this changing, it may do so in the
@@ -363,8 +363,8 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
scsi_sysfs_device_initialize(sdev);
- if (shost->hostt->slave_alloc) {
- ret = shost->hostt->slave_alloc(sdev);
+ if (shost->hostt->sdev_init) {
+ ret = shost->hostt->sdev_init(sdev);
if (ret) {
/*
* if LLDD reports slave not present, don't clutter
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 32f94db6d6bf..019e61640f89 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1513,8 +1513,8 @@ void __scsi_remove_device(struct scsi_device *sdev)
kref_put(&sdev->host->tagset_refcnt, scsi_mq_free_tags);
cancel_work_sync(&sdev->requeue_work);
- if (sdev->host->hostt->slave_destroy)
- sdev->host->hostt->slave_destroy(sdev);
+ if (sdev->host->hostt->sdev_destroy)
+ sdev->host->hostt->sdev_destroy(sdev);
transport_destroy_device(dev);
/*
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 7fd5a8c813dc..c51f760306c7 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6490,7 +6490,7 @@ static int pqi_eh_abort_handler(struct scsi_cmnd *scmd)
return SUCCESS;
}
-static int pqi_slave_alloc(struct scsi_device *sdev)
+static int pqi_sdev_init(struct scsi_device *sdev)
{
struct pqi_scsi_dev *device;
unsigned long flags;
@@ -6574,7 +6574,7 @@ static int pqi_slave_configure(struct scsi_device *sdev)
return rc;
}
-static void pqi_slave_destroy(struct scsi_device *sdev)
+static void pqi_sdev_destroy(struct scsi_device *sdev)
{
struct pqi_ctrl_info *ctrl_info;
struct pqi_scsi_dev *device;
@@ -7549,9 +7549,9 @@ static const struct scsi_host_template pqi_driver_template = {
.eh_device_reset_handler = pqi_eh_device_reset_handler,
.eh_abort_handler = pqi_eh_abort_handler,
.ioctl = pqi_ioctl,
- .slave_alloc = pqi_slave_alloc,
+ .sdev_init = pqi_sdev_init,
.slave_configure = pqi_slave_configure,
- .slave_destroy = pqi_slave_destroy,
+ .sdev_destroy = pqi_sdev_destroy,
.map_queues = pqi_map_queues,
.sdev_groups = pqi_sdev_groups,
.shost_groups = pqi_shost_groups,
diff --git a/drivers/scsi/snic/snic_main.c b/drivers/scsi/snic/snic_main.c
index 9be3f0193145..14830b6ab94b 100644
--- a/drivers/scsi/snic/snic_main.c
+++ b/drivers/scsi/snic/snic_main.c
@@ -42,11 +42,11 @@ module_param(snic_max_qdepth, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(snic_max_qdepth, "Queue depth to report for each LUN");
/*
- * snic_slave_alloc : callback function to SCSI Mid Layer, called on
+ * snic_sdev_init : callback function to SCSI Mid Layer, called on
* scsi device initialization.
*/
static int
-snic_slave_alloc(struct scsi_device *sdev)
+snic_sdev_init(struct scsi_device *sdev)
{
struct snic_tgt *tgt = starget_to_tgt(scsi_target(sdev));
@@ -107,7 +107,7 @@ static const struct scsi_host_template snic_host_template = {
.eh_abort_handler = snic_abort_cmd,
.eh_device_reset_handler = snic_device_reset,
.eh_host_reset_handler = snic_host_reset,
- .slave_alloc = snic_slave_alloc,
+ .sdev_init = snic_sdev_init,
.slave_configure = snic_slave_configure,
.change_queue_depth = snic_change_queue_depth,
.this_id = -1,
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 7ceb982040a5..0f18591539e7 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1875,7 +1875,7 @@ static struct scsi_host_template scsi_driver = {
.eh_host_reset_handler = storvsc_host_reset_handler,
.proc_name = "storvsc_host",
.eh_timed_out = storvsc_eh_timed_out,
- .slave_alloc = storvsc_device_alloc,
+ .sdev_init = storvsc_device_alloc,
.slave_configure = storvsc_device_configure,
.cmd_per_lun = 2048,
.this_id = -1,
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index a2560cc807d3..e7a17f87027d 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -765,7 +765,7 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
}
}
-static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
+static int sym53c8xx_sdev_init(struct scsi_device *sdev)
{
struct sym_hcb *np = sym_get_hcb(sdev->host);
struct sym_tcb *tp = &np->target[sdev->id];
@@ -861,14 +861,14 @@ static int sym53c8xx_slave_configure(struct scsi_device *sdev)
return 0;
}
-static void sym53c8xx_slave_destroy(struct scsi_device *sdev)
+static void sym53c8xx_sdev_destroy(struct scsi_device *sdev)
{
struct sym_hcb *np = sym_get_hcb(sdev->host);
struct sym_tcb *tp = &np->target[sdev->id];
struct sym_lcb *lp = sym_lp(tp, sdev->lun);
unsigned long flags;
- /* if slave_alloc returned before allocating a sym_lcb, return */
+ /* if sdev_init returned before allocating a sym_lcb, return */
if (!lp)
return;
@@ -1684,9 +1684,9 @@ static const struct scsi_host_template sym2_template = {
.info = sym53c8xx_info,
.cmd_size = sizeof(struct sym_ucmd),
.queuecommand = sym53c8xx_queue_command,
- .slave_alloc = sym53c8xx_slave_alloc,
+ .sdev_init = sym53c8xx_sdev_init,
.slave_configure = sym53c8xx_slave_configure,
- .slave_destroy = sym53c8xx_slave_destroy,
+ .sdev_destroy = sym53c8xx_sdev_destroy,
.eh_abort_handler = sym53c8xx_eh_abort_handler,
.eh_target_reset_handler = sym53c8xx_eh_target_reset_handler,
.eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler,
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 8471f38b730e..4dab566c913b 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -801,7 +801,7 @@ static const struct scsi_host_template virtscsi_host_template = {
.eh_abort_handler = virtscsi_abort,
.eh_device_reset_handler = virtscsi_device_reset,
.eh_timed_out = virtscsi_eh_timed_out,
- .slave_alloc = virtscsi_device_alloc,
+ .sdev_init = virtscsi_device_alloc,
.dma_boundary = UINT_MAX,
.map_queues = virtscsi_map_queues,
diff --git a/drivers/scsi/xen-scsifront.c b/drivers/scsi/xen-scsifront.c
index 9ec55ddc1204..8ac3b284c2ef 100644
--- a/drivers/scsi/xen-scsifront.c
+++ b/drivers/scsi/xen-scsifront.c
@@ -777,7 +777,7 @@ static const struct scsi_host_template scsifront_sht = {
.eh_abort_handler = scsifront_eh_abort_handler,
.eh_device_reset_handler = scsifront_dev_reset_handler,
.slave_configure = scsifront_sdev_configure,
- .slave_destroy = scsifront_sdev_destroy,
+ .sdev_destroy = scsifront_sdev_destroy,
.cmd_per_lun = VSCSIIF_DEFAULT_CMD_PER_LUN,
.can_queue = VSCSIIF_MAX_REQS,
.this_id = -1,
@@ -1075,7 +1075,7 @@ static void scsifront_do_lun_hotplug(struct vscsifrnt_info *info, int op)
/*
* Front device state path, used in slave_configure called
- * on successfull scsi_add_device, and in slave_destroy called
+ * on successfull scsi_add_device, and in sdev_destroy called
* on remove of a device.
*/
snprintf(info->dev_state_path, sizeof(info->dev_state_path),
diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
index c4f54c311d05..6851a28f5ec6 100644
--- a/drivers/staging/rts5208/rtsx.c
+++ b/drivers/staging/rts5208/rtsx.c
@@ -57,7 +57,7 @@ static const char *host_info(struct Scsi_Host *host)
return "SCSI emulation for PCI-Express Mass Storage devices";
}
-static int slave_alloc(struct scsi_device *sdev)
+static int sdev_init(struct scsi_device *sdev)
{
/*
* Set the INQUIRY transfer length to 36. We don't use any of
@@ -198,7 +198,7 @@ static const struct scsi_host_template rtsx_host_template = {
/* unknown initiator id */
.this_id = -1,
- .slave_alloc = slave_alloc,
+ .sdev_init = sdev_init,
.slave_configure = slave_configure,
/* lots of sg segments can be handled */
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 9e6d008f4ea4..36410c2e1ee4 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5177,12 +5177,12 @@ static void ufshcd_lu_init(struct ufs_hba *hba, struct scsi_device *sdev)
}
/**
- * ufshcd_slave_alloc - handle initial SCSI device configurations
+ * ufshcd_sdev_init - handle initial SCSI device configurations
* @sdev: pointer to SCSI device
*
* Return: success.
*/
-static int ufshcd_slave_alloc(struct scsi_device *sdev)
+static int ufshcd_sdev_init(struct scsi_device *sdev)
{
struct ufs_hba *hba;
@@ -5260,10 +5260,10 @@ static int ufshcd_device_configure(struct scsi_device *sdev,
}
/**
- * ufshcd_slave_destroy - remove SCSI device configurations
+ * ufshcd_sdev_destroy - remove SCSI device configurations
* @sdev: pointer to SCSI device
*/
-static void ufshcd_slave_destroy(struct scsi_device *sdev)
+static void ufshcd_sdev_destroy(struct scsi_device *sdev)
{
struct ufs_hba *hba;
unsigned long flags;
@@ -8973,9 +8973,9 @@ static const struct scsi_host_template ufshcd_driver_template = {
.map_queues = ufshcd_map_queues,
.queuecommand = ufshcd_queuecommand,
.mq_poll = ufshcd_poll,
- .slave_alloc = ufshcd_slave_alloc,
+ .sdev_init = ufshcd_sdev_init,
.device_configure = ufshcd_device_configure,
- .slave_destroy = ufshcd_slave_destroy,
+ .sdev_destroy = ufshcd_sdev_destroy,
.change_queue_depth = ufshcd_change_queue_depth,
.eh_abort_handler = ufshcd_abort,
.eh_device_reset_handler = ufshcd_eh_device_reset_handler,
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 9f758241d9d3..934ec5310fb9 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -322,7 +322,7 @@ static inline void mts_urb_abort(struct mts_desc* desc) {
usb_kill_urb( desc->urb );
}
-static int mts_slave_alloc (struct scsi_device *s)
+static int mts_sdev_init (struct scsi_device *s)
{
s->inquiry_len = 0x24;
return 0;
@@ -626,7 +626,7 @@ static const struct scsi_host_template mts_scsi_host_template = {
.this_id = -1,
.emulated = 1,
.dma_alignment = 511,
- .slave_alloc = mts_slave_alloc,
+ .sdev_init = mts_sdev_init,
.max_sectors= 256, /* 128 K */
};
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 8c8b5e6041cc..a64ce2aca9ec 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -64,7 +64,7 @@ static const char* host_info(struct Scsi_Host *host)
return us->scsi_name;
}
-static int slave_alloc (struct scsi_device *sdev)
+static int sdev_init (struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
@@ -127,7 +127,7 @@ static int device_configure(struct scsi_device *sdev, struct queue_limits *lim)
lim->max_hw_sectors, dma_max_mapping_size(dev) >> SECTOR_SHIFT);
/*
- * We can't put these settings in slave_alloc() because that gets
+ * We can't put these settings in sdev_init() because that gets
* called before the device type is known. Consequently these
* settings can't be overridden via the scsi devinfo mechanism.
*/
@@ -637,7 +637,7 @@ static const struct scsi_host_template usb_stor_host_template = {
/* unknown initiator id */
.this_id = -1,
- .slave_alloc = slave_alloc,
+ .sdev_init = sdev_init,
.device_configure = device_configure,
.target_alloc = target_alloc,
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 03043d567fa1..7bd2a314b329 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -817,7 +817,7 @@ static int uas_target_alloc(struct scsi_target *starget)
return 0;
}
-static int uas_slave_alloc(struct scsi_device *sdev)
+static int uas_sdev_init(struct scsi_device *sdev)
{
struct uas_dev_info *devinfo =
(struct uas_dev_info *)sdev->host->hostdata;
@@ -905,7 +905,7 @@ static const struct scsi_host_template uas_host_template = {
.name = "uas",
.queuecommand = uas_queuecommand,
.target_alloc = uas_target_alloc,
- .slave_alloc = uas_slave_alloc,
+ .sdev_init = uas_sdev_init,
.device_configure = uas_device_configure,
.eh_abort_handler = uas_eh_abort_handler,
.eh_device_reset_handler = uas_eh_device_reset_handler,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 9b4a6ff03235..3318004a1b18 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1201,10 +1201,10 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
struct block_device *bdev,
sector_t capacity, int geom[]);
extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
-extern int ata_scsi_slave_alloc(struct scsi_device *sdev);
+extern int ata_scsi_sdev_init(struct scsi_device *sdev);
int ata_scsi_device_configure(struct scsi_device *sdev,
struct queue_limits *lim);
-extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
+extern void ata_scsi_sdev_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
extern int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
@@ -1460,8 +1460,8 @@ extern const struct attribute_group *ata_common_sdev_groups[];
.this_id = ATA_SHT_THIS_ID, \
.emulated = ATA_SHT_EMULATED, \
.proc_name = drv_name, \
- .slave_alloc = ata_scsi_slave_alloc, \
- .slave_destroy = ata_scsi_slave_destroy, \
+ .sdev_init = ata_scsi_sdev_init, \
+ .sdev_destroy = ata_scsi_sdev_destroy, \
.bios_param = ata_std_bios_param, \
.unlock_native_capacity = ata_scsi_unlock_native_capacity,\
.max_sectors = ATA_MAX_SECTORS_LBA48
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 4a9b4169e081..183d9fd50d2d 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -963,7 +963,7 @@ int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int fc_eh_abort(struct scsi_cmnd *);
int fc_eh_device_reset(struct scsi_cmnd *);
int fc_eh_host_reset(struct scsi_cmnd *);
-int fc_slave_alloc(struct scsi_device *);
+int fc_sdev_init(struct scsi_device *);
/*
* ELS/CT interface
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 1324068dd950..f30f716ba045 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -703,7 +703,7 @@ int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
extern void sas_target_destroy(struct scsi_target *);
-extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_sdev_init(struct scsi_device *);
extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd,
void __user *arg);
extern int sas_drain_work(struct sas_ha_struct *ha);
@@ -751,7 +751,7 @@ void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
#define LIBSAS_SHT_BASE _LIBSAS_SHT_BASE \
.device_configure = sas_device_configure, \
- .slave_alloc = sas_slave_alloc, \
+ .sdev_init = sas_sdev_init, \
#define LIBSAS_SHT_BASE_NO_SLAVE_INIT _LIBSAS_SHT_BASE
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9c540f5468eb..7acd0ec82bb0 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -155,7 +155,7 @@ struct scsi_device {
blist_flags_t sdev_bflags; /* black/white flags as also found in
* scsi_devinfo.[hc]. For now used only to
- * pass settings from slave_alloc to scsi
+ * pass settings from sdev_init to scsi
* core. */
unsigned int eh_timeout; /* Error handling timeout */
@@ -357,7 +357,7 @@ struct scsi_target {
atomic_t target_blocked;
/*
- * LLDs should set this in the slave_alloc host template callout.
+ * LLDs should set this in the sdev_init host template callout.
* If set to zero then there is not limit.
*/
unsigned int can_queue;
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 2b4ab0369ffb..58b29cc6de09 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -168,20 +168,20 @@ struct scsi_host_template {
* Return values: 0 on success, non-0 on failure
*
* Deallocation: If we didn't find any devices at this ID, you will
- * get an immediate call to slave_destroy(). If we find something
+ * get an immediate call to sdev_destroy(). If we find something
* here then you will get a call to slave_configure(), then the
* device will be used for however long it is kept around, then when
* the device is removed from the system (or * possibly at reboot
- * time), you will then get a call to slave_destroy(). This is
- * assuming you implement slave_configure and slave_destroy.
+ * time), you will then get a call to sdev_destroy(). This is
+ * assuming you implement slave_configure and sdev_destroy.
* However, if you allocate memory and hang it off the device struct,
- * then you must implement the slave_destroy() routine at a minimum
+ * then you must implement the sdev_destroy() routine at a minimum
* in order to avoid leaking memory
* each time a device is tore down.
*
* Status: OPTIONAL
*/
- int (* slave_alloc)(struct scsi_device *);
+ int (* sdev_init)(struct scsi_device *);
/*
* Once the device has responded to an INQUIRY and we know the
@@ -206,7 +206,7 @@ struct scsi_host_template {
* specific setup basis...
* 6. Return 0 on success, non-0 on error. The device will be marked
* as offline on error so that no access will occur. If you return
- * non-0, your slave_destroy routine will never get called for this
+ * non-0, your sdev_destroy routine will never get called for this
* device, so don't leave any loose memory hanging around, clean
* up after yourself before returning non-0
*
@@ -223,11 +223,11 @@ struct scsi_host_template {
* has ceased the mid layer calls this point so that the low level
* driver may completely detach itself from the scsi device and vice
* versa. The low level driver is responsible for freeing any memory
- * it allocated in the slave_alloc or slave_configure calls.
+ * it allocated in the sdev_init or slave_configure calls.
*
* Status: OPTIONAL
*/
- void (* slave_destroy)(struct scsi_device *);
+ void (* sdev_destroy)(struct scsi_device *);
/*
* Before the mid layer attempts to scan for a new device attached
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 2/5] scsi: Rename .device_configure() into .sdev_configure()
2024-10-22 18:07 [PATCH v4 0/5] Replace the "slave_*" function names Bart Van Assche
2024-10-22 18:07 ` [PATCH v4 1/5] scsi: Rename .slave_alloc() and .slave_destroy() Bart Van Assche
@ 2024-10-22 18:07 ` Bart Van Assche
2024-10-22 18:07 ` [PATCH v4 3/5] scsi: Convert SCSI drivers to .sdev_configure() Bart Van Assche
` (4 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Bart Van Assche @ 2024-10-22 18:07 UTC (permalink / raw)
To: Martin K . Petersen
Cc: Damien Le Moal, Randy Dunlap, linux-scsi, Bart Van Assche,
Christoph Hellwig, Niklas Cassel, Takashi Sakamoto, Yihang Li,
James E.J. Bottomley, HighPoint Linux Team, Brian King,
Lee Duncan, Chris Leech, Mike Christie, Kashyap Desai,
Sumit Saxena, Shivasharan S, Chandrakanth patil,
Sathya Prakash Veerichetty, Sreekanth Reddy,
Suganath Prabu Subramani, Alan Stern, Greg Kroah-Hartman,
Oliver Neukum, John Garry, Hannes Reinecke, Peter Wang,
Manivannan Sadhasivam, Avri Altman, Andrew Halaney, Bean Huo,
Maramaina Naresh, Bao D. Nguyen
Improve naming consistency with the .sdev_prep() and .sdev_destroy()
methods by renaming .device_configure() into .sdev_configure().
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/ata/ahci.h | 2 +-
drivers/ata/libata-sata.c | 8 ++++----
drivers/ata/libata-scsi.c | 7 +++----
drivers/ata/pata_macio.c | 8 ++++----
drivers/ata/sata_mv.c | 2 +-
drivers/ata/sata_nv.c | 24 +++++++++++------------
drivers/ata/sata_sil24.c | 2 +-
drivers/firewire/sbp2.c | 6 +++---
drivers/scsi/hisi_sas/hisi_sas.h | 3 +--
drivers/scsi/hisi_sas/hisi_sas_main.c | 7 +++----
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 8 ++++----
drivers/scsi/hptiop.c | 6 +++---
drivers/scsi/ipr.c | 8 ++++----
drivers/scsi/iscsi_tcp.c | 6 +++---
drivers/scsi/libsas/sas_scsi_host.c | 7 +++----
drivers/scsi/megaraid/megaraid_sas_base.c | 6 +++---
drivers/scsi/mpi3mr/mpi3mr_os.c | 8 ++++----
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 ++++----
drivers/scsi/pmcraid.c | 8 ++++----
drivers/scsi/scsi_scan.c | 10 +++++-----
drivers/ufs/core/ufshcd.c | 8 ++++----
drivers/usb/storage/scsiglue.c | 4 ++--
drivers/usb/storage/uas.c | 6 +++---
include/linux/libata.h | 11 +++++------
include/scsi/libsas.h | 5 ++---
include/scsi/scsi_host.h | 4 ++--
28 files changed, 90 insertions(+), 96 deletions(-)
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 8f40f75ba08c..75cdf51a7f74 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -397,7 +397,7 @@ extern const struct attribute_group *ahci_sdev_groups[];
.sdev_groups = ahci_sdev_groups, \
.change_queue_depth = ata_scsi_change_queue_depth, \
.tag_alloc_policy = BLK_TAG_ALLOC_RR, \
- .device_configure = ata_scsi_device_configure
+ .sdev_configure = ata_scsi_sdev_configure
extern struct ata_port_operations ahci_ops;
extern struct ata_port_operations ahci_platform_ops;
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index c8b119a06bb2..36fd0499cdfb 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1313,7 +1313,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
/**
- * ata_sas_device_configure - Default device_configure routine for libata
+ * ata_sas_sdev_configure - Default sdev_configure routine for libata
* devices
* @sdev: SCSI device to configure
* @lim: queue limits
@@ -1323,14 +1323,14 @@ EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
* Zero.
*/
-int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim,
- struct ata_port *ap)
+int ata_sas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim,
+ struct ata_port *ap)
{
ata_scsi_sdev_config(sdev);
return ata_scsi_dev_config(sdev, lim, ap->link.device);
}
-EXPORT_SYMBOL_GPL(ata_sas_device_configure);
+EXPORT_SYMBOL_GPL(ata_sas_sdev_configure);
/**
* ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 27cde1759011..80b6ec577233 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1169,7 +1169,7 @@ int ata_scsi_sdev_init(struct scsi_device *sdev)
EXPORT_SYMBOL_GPL(ata_scsi_sdev_init);
/**
- * ata_scsi_device_configure - Set SCSI device attributes
+ * ata_scsi_sdev_configure - Set SCSI device attributes
* @sdev: SCSI device to examine
* @lim: queue limits
*
@@ -1181,8 +1181,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_sdev_init);
* Defined by SCSI layer. We don't really care.
*/
-int ata_scsi_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+int ata_scsi_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
@@ -1192,7 +1191,7 @@ int ata_scsi_device_configure(struct scsi_device *sdev,
return 0;
}
-EXPORT_SYMBOL_GPL(ata_scsi_device_configure);
+EXPORT_SYMBOL_GPL(ata_scsi_sdev_configure);
/**
* ata_scsi_sdev_destroy - SCSI device is about to be destroyed
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index f2f36e55a1f4..a8e2989d0469 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -812,8 +812,8 @@ static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
/* Hook the standard slave config to fixup some HW related alignment
* restrictions
*/
-static int pata_macio_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int pata_macio_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct pata_macio_priv *priv = ap->private_data;
@@ -822,7 +822,7 @@ static int pata_macio_device_configure(struct scsi_device *sdev,
int rc;
/* First call original */
- rc = ata_scsi_device_configure(sdev, lim);
+ rc = ata_scsi_sdev_configure(sdev, lim);
if (rc)
return rc;
@@ -932,7 +932,7 @@ static const struct scsi_host_template pata_macio_sht = {
/* We may not need that strict one */
.dma_boundary = ATA_DMA_BOUNDARY,
.max_segment_size = PATA_MACIO_MAX_SEGMENT_SIZE,
- .device_configure = pata_macio_device_configure,
+ .sdev_configure = pata_macio_sdev_configure,
.sdev_groups = ata_common_sdev_groups,
.can_queue = ATA_DEF_QUEUE,
.tag_alloc_policy = BLK_TAG_ALLOC_RR,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 05c905827dc5..705f9bae2175 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -673,7 +673,7 @@ static const struct scsi_host_template mv6_sht = {
.sdev_groups = ata_ncq_sdev_groups,
.change_queue_depth = ata_scsi_change_queue_depth,
.tag_alloc_policy = BLK_TAG_ALLOC_RR,
- .device_configure = ata_scsi_device_configure
+ .sdev_configure = ata_scsi_sdev_configure
};
static struct ata_port_operations mv5_ops = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 36d99043ef50..b62b8ebdd89f 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -296,8 +296,8 @@ static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_adma_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim);
+static int nv_adma_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static enum ata_completion_errors nv_adma_qc_prep(struct ata_queued_cmd *qc);
static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
@@ -319,8 +319,8 @@ static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void nv_mcp55_thaw(struct ata_port *ap);
static void nv_mcp55_freeze(struct ata_port *ap);
static void nv_swncq_error_handler(struct ata_port *ap);
-static int nv_swncq_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim);
+static int nv_swncq_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim);
static int nv_swncq_port_start(struct ata_port *ap);
static enum ata_completion_errors nv_swncq_qc_prep(struct ata_queued_cmd *qc);
static void nv_swncq_fill_sg(struct ata_queued_cmd *qc);
@@ -382,7 +382,7 @@ static const struct scsi_host_template nv_adma_sht = {
.can_queue = NV_ADMA_MAX_CPBS,
.sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
.dma_boundary = NV_ADMA_DMA_BOUNDARY,
- .device_configure = nv_adma_device_configure,
+ .sdev_configure = nv_adma_sdev_configure,
.sdev_groups = ata_ncq_sdev_groups,
.change_queue_depth = ata_scsi_change_queue_depth,
.tag_alloc_policy = BLK_TAG_ALLOC_RR,
@@ -393,7 +393,7 @@ static const struct scsi_host_template nv_swncq_sht = {
.can_queue = ATA_MAX_QUEUE - 1,
.sg_tablesize = LIBATA_MAX_PRD,
.dma_boundary = ATA_DMA_BOUNDARY,
- .device_configure = nv_swncq_device_configure,
+ .sdev_configure = nv_swncq_sdev_configure,
.sdev_groups = ata_ncq_sdev_groups,
.change_queue_depth = ata_scsi_change_queue_depth,
.tag_alloc_policy = BLK_TAG_ALLOC_RR,
@@ -663,8 +663,8 @@ static void nv_adma_mode(struct ata_port *ap)
pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
}
-static int nv_adma_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int nv_adma_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct nv_adma_port_priv *pp = ap->private_data;
@@ -676,7 +676,7 @@ static int nv_adma_device_configure(struct scsi_device *sdev,
int adma_enable;
u32 current_reg, new_reg, config_mask;
- rc = ata_scsi_device_configure(sdev, lim);
+ rc = ata_scsi_sdev_configure(sdev, lim);
if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
/* Not a proper libata device, ignore */
@@ -1871,8 +1871,8 @@ static void nv_swncq_host_init(struct ata_host *host)
writel(~0x0, mmio + NV_INT_STATUS_MCP55);
}
-static int nv_swncq_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int nv_swncq_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -1882,7 +1882,7 @@ static int nv_swncq_device_configure(struct scsi_device *sdev,
u8 check_maxtor = 0;
unsigned char model_num[ATA_ID_PROD_LEN + 1];
- rc = ata_scsi_device_configure(sdev, lim);
+ rc = ata_scsi_sdev_configure(sdev, lim);
if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
/* Not a proper libata device, ignore */
return rc;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 72c03cbdaff4..3e0be0399619 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -381,7 +381,7 @@ static const struct scsi_host_template sil24_sht = {
.tag_alloc_policy = BLK_TAG_ALLOC_FIFO,
.sdev_groups = ata_ncq_sdev_groups,
.change_queue_depth = ata_scsi_change_queue_depth,
- .device_configure = ata_scsi_device_configure
+ .sdev_configure = ata_scsi_sdev_configure
};
static struct ata_port_operations sil24_ops = {
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 4937df12c3fb..1a19828114cf 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1506,8 +1506,8 @@ static int sbp2_scsi_sdev_init(struct scsi_device *sdev)
return 0;
}
-static int sbp2_scsi_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int sbp2_scsi_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct sbp2_logical_unit *lu = sdev->hostdata;
@@ -1591,7 +1591,7 @@ static const struct scsi_host_template scsi_driver_template = {
.proc_name = "sbp2",
.queuecommand = sbp2_scsi_queuecommand,
.sdev_init = sbp2_scsi_sdev_init,
- .device_configure = sbp2_scsi_device_configure,
+ .sdev_configure = sbp2_scsi_sdev_configure,
.eh_abort_handler = sbp2_scsi_abort,
.this_id = -1,
.sg_tablesize = SG_ALL,
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index fee3cadfde1e..45ea313b342b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -644,8 +644,7 @@ extern int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *ops);
extern void hisi_sas_remove(struct platform_device *pdev);
-int hisi_sas_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim);
+int hisi_sas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim);
extern int hisi_sas_sdev_init(struct scsi_device *sdev);
extern int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time);
extern void hisi_sas_scan_start(struct Scsi_Host *shost);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index a80d8b2a9941..da4a2ed8ee86 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -868,11 +868,10 @@ static int hisi_sas_dev_found(struct domain_device *device)
return rc;
}
-int hisi_sas_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+int hisi_sas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct domain_device *dev = sdev_to_domain_dev(sdev);
- int ret = sas_device_configure(sdev, lim);
+ int ret = sas_sdev_configure(sdev, lim);
if (ret)
return ret;
@@ -881,7 +880,7 @@ int hisi_sas_device_configure(struct scsi_device *sdev,
return 0;
}
-EXPORT_SYMBOL_GPL(hisi_sas_device_configure);
+EXPORT_SYMBOL_GPL(hisi_sas_sdev_configure);
void hisi_sas_scan_start(struct Scsi_Host *shost)
{
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 71e1353e9eaa..3efc9cb26378 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1753,7 +1753,7 @@ static int check_fw_info_v1_hw(struct hisi_hba *hisi_hba)
static const struct scsi_host_template sht_v1_hw = {
LIBSAS_SHT_BASE_NO_SLAVE_INIT
- .device_configure = hisi_sas_device_configure,
+ .sdev_configure = hisi_sas_sdev_configure,
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index d28d673ecad0..fe25403dd53a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3585,7 +3585,7 @@ static int check_fw_info_v2_hw(struct hisi_hba *hisi_hba)
static const struct scsi_host_template sht_v2_hw = {
LIBSAS_SHT_BASE_NO_SLAVE_INIT
- .device_configure = hisi_sas_device_configure,
+ .sdev_configure = hisi_sas_sdev_configure,
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 5758388508ec..6766995e227b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2908,12 +2908,12 @@ static ssize_t iopoll_q_cnt_v3_hw_show(struct device *dev,
}
static DEVICE_ATTR_RO(iopoll_q_cnt_v3_hw);
-static int device_configure_v3_hw(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int sdev_configure_v3_hw(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct Scsi_Host *shost = dev_to_shost(&sdev->sdev_gendev);
struct hisi_hba *hisi_hba = shost_priv(shost);
- int ret = hisi_sas_device_configure(sdev, lim);
+ int ret = hisi_sas_sdev_configure(sdev, lim);
struct device *dev = hisi_hba->dev;
if (ret)
@@ -3336,7 +3336,7 @@ static void hisi_sas_map_queues(struct Scsi_Host *shost)
static const struct scsi_host_template sht_v3_hw = {
LIBSAS_SHT_BASE_NO_SLAVE_INIT
- .device_configure = device_configure_v3_hw,
+ .sdev_configure = sdev_configure_v3_hw,
.scan_finished = hisi_sas_scan_finished,
.scan_start = hisi_sas_scan_start,
.map_queues = hisi_sas_map_queues,
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index e889f268601b..55eee5b0f0d7 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -1151,8 +1151,8 @@ static struct attribute *hptiop_host_attrs[] = {
ATTRIBUTE_GROUPS(hptiop_host);
-static int hptiop_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int hptiop_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
if (sdev->type == TYPE_TAPE)
lim->max_hw_sectors = 8192;
@@ -1168,7 +1168,7 @@ static const struct scsi_host_template driver_template = {
.emulated = 0,
.proc_name = driver_name,
.shost_groups = hptiop_host_groups,
- .device_configure = hptiop_device_configure,
+ .sdev_configure = hptiop_sdev_configure,
.this_id = -1,
.change_queue_depth = hptiop_adjust_disk_queue_depth,
.cmd_size = sizeof(struct hpt_cmd_priv),
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 41bc54e27896..f0444faf776a 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4769,7 +4769,7 @@ static void ipr_sdev_destroy(struct scsi_device *sdev)
}
/**
- * ipr_device_configure - Configure a SCSI device
+ * ipr_sdev_configure - Configure a SCSI device
* @sdev: scsi device struct
* @lim: queue limits
*
@@ -4778,8 +4778,8 @@ static void ipr_sdev_destroy(struct scsi_device *sdev)
* Return value:
* 0 on success
**/
-static int ipr_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int ipr_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
@@ -6399,7 +6399,7 @@ static const struct scsi_host_template driver_template = {
.eh_device_reset_handler = ipr_eh_dev_reset,
.eh_host_reset_handler = ipr_eh_host_reset,
.sdev_init = ipr_sdev_init,
- .device_configure = ipr_device_configure,
+ .sdev_configure = ipr_sdev_configure,
.sdev_destroy = ipr_sdev_destroy,
.scan_finished = ipr_scan_finished,
.target_destroy = ipr_target_destroy,
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index c708e1059638..e81f60985193 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -1057,8 +1057,8 @@ static umode_t iscsi_sw_tcp_attr_is_visible(int param_type, int param)
return 0;
}
-static int iscsi_sw_tcp_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int iscsi_sw_tcp_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct iscsi_sw_tcp_host *tcp_sw_host = iscsi_host_priv(sdev->host);
struct iscsi_session *session = tcp_sw_host->session;
@@ -1083,7 +1083,7 @@ static const struct scsi_host_template iscsi_sw_tcp_sht = {
.eh_device_reset_handler= iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_recover_target,
.dma_boundary = PAGE_SIZE - 1,
- .device_configure = iscsi_sw_tcp_device_configure,
+ .sdev_configure = iscsi_sw_tcp_sdev_configure,
.proc_name = "iscsi_tcp",
.this_id = -1,
.track_queue_depth = 1,
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index e7d5093f7c5d..55ce7892f217 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -804,15 +804,14 @@ EXPORT_SYMBOL_GPL(sas_target_alloc);
#define SAS_DEF_QD 256
-int sas_device_configure(struct scsi_device *scsi_dev,
- struct queue_limits *lim)
+int sas_sdev_configure(struct scsi_device *scsi_dev, struct queue_limits *lim)
{
struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
if (dev_is_sata(dev)) {
- ata_sas_device_configure(scsi_dev, lim, dev->sata_dev.ap);
+ ata_sas_sdev_configure(scsi_dev, lim, dev->sata_dev.ap);
return 0;
}
@@ -830,7 +829,7 @@ int sas_device_configure(struct scsi_device *scsi_dev,
return 0;
}
-EXPORT_SYMBOL_GPL(sas_device_configure);
+EXPORT_SYMBOL_GPL(sas_sdev_configure);
int sas_change_queue_depth(struct scsi_device *sdev, int depth)
{
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 56cb240d9631..d7b0fbce88fa 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2068,8 +2068,8 @@ static void megasas_set_static_target_properties(struct scsi_device *sdev,
}
-static int megasas_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int megasas_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
u16 pd_index = 0;
struct megasas_instance *instance;
@@ -3510,7 +3510,7 @@ static const struct scsi_host_template megasas_template = {
.module = THIS_MODULE,
.name = "Avago SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
- .device_configure = megasas_device_configure,
+ .sdev_configure = megasas_sdev_configure,
.sdev_init = megasas_sdev_init,
.sdev_destroy = megasas_sdev_destroy,
.queuecommand = megasas_queue_command,
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 6b9f453565f2..f84bdce8c65c 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -4552,7 +4552,7 @@ static void mpi3mr_target_destroy(struct scsi_target *starget)
}
/**
- * mpi3mr_device_configure - Slave configure callback handler
+ * mpi3mr_sdev_configure - Slave configure callback handler
* @sdev: SCSI device reference
* @lim: queue limits
*
@@ -4561,8 +4561,8 @@ static void mpi3mr_target_destroy(struct scsi_target *starget)
*
* Return: 0 always.
*/
-static int mpi3mr_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int mpi3mr_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct scsi_target *starget;
struct Scsi_Host *shost;
@@ -5063,7 +5063,7 @@ static const struct scsi_host_template mpi3mr_driver_template = {
.queuecommand = mpi3mr_qcmd,
.target_alloc = mpi3mr_target_alloc,
.sdev_init = mpi3mr_sdev_init,
- .device_configure = mpi3mr_device_configure,
+ .sdev_configure = mpi3mr_sdev_configure,
.target_destroy = mpi3mr_target_destroy,
.sdev_destroy = mpi3mr_sdev_destroy,
.scan_finished = mpi3mr_scan_finished,
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index f113fba81f02..38cb83793f9d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2497,7 +2497,7 @@ _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
}
/**
- * scsih_device_configure - device configure routine.
+ * scsih_sdev_configure - device configure routine.
* @sdev: scsi device struct
* @lim: queue limits
*
@@ -2505,7 +2505,7 @@ _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
* the device is ignored.
*/
static int
-scsih_device_configure(struct scsi_device *sdev, struct queue_limits *lim)
+scsih_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct Scsi_Host *shost = sdev->host;
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
@@ -11906,7 +11906,7 @@ static const struct scsi_host_template mpt2sas_driver_template = {
.queuecommand = scsih_qcmd,
.target_alloc = scsih_target_alloc,
.sdev_init = scsih_sdev_init,
- .device_configure = scsih_device_configure,
+ .sdev_configure = scsih_sdev_configure,
.target_destroy = scsih_target_destroy,
.sdev_destroy = scsih_sdev_destroy,
.scan_finished = scsih_scan_finished,
@@ -11944,7 +11944,7 @@ static const struct scsi_host_template mpt3sas_driver_template = {
.queuecommand = scsih_qcmd,
.target_alloc = scsih_target_alloc,
.sdev_init = scsih_sdev_init,
- .device_configure = scsih_device_configure,
+ .sdev_configure = scsih_sdev_configure,
.target_destroy = scsih_target_destroy,
.sdev_destroy = scsih_sdev_destroy,
.scan_finished = scsih_scan_finished,
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index d9e6e75e801c..2342ded7ee78 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -197,7 +197,7 @@ static int pmcraid_sdev_init(struct scsi_device *scsi_dev)
}
/**
- * pmcraid_device_configure - Configures a SCSI device
+ * pmcraid_sdev_configure - Configures a SCSI device
* @scsi_dev: scsi device struct
* @lim: queue limits
*
@@ -210,8 +210,8 @@ static int pmcraid_sdev_init(struct scsi_device *scsi_dev)
* Return value:
* 0 on success
*/
-static int pmcraid_device_configure(struct scsi_device *scsi_dev,
- struct queue_limits *lim)
+static int pmcraid_sdev_configure(struct scsi_device *scsi_dev,
+ struct queue_limits *lim)
{
struct pmcraid_resource_entry *res = scsi_dev->hostdata;
@@ -3669,7 +3669,7 @@ static const struct scsi_host_template pmcraid_host_template = {
.eh_host_reset_handler = pmcraid_eh_host_reset_handler,
.sdev_init = pmcraid_sdev_init,
- .device_configure = pmcraid_device_configure,
+ .sdev_configure = pmcraid_sdev_configure,
.sdev_destroy = pmcraid_sdev_destroy,
.change_queue_depth = pmcraid_change_queue_depth,
.can_queue = PMCRAID_MAX_IO_CMD,
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index da8aecc9d304..b60c218dc0d0 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -227,7 +227,7 @@ static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
/*
* realloc if new shift is calculated, which is caused by setting
- * up one new default queue depth after calling ->device_configure
+ * up one new default queue depth after calling ->sdev_configure
*/
if (!need_alloc && new_shift != sdev->budget_map.shift)
need_alloc = need_free = true;
@@ -1074,8 +1074,8 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
else if (*bflags & BLIST_MAX_1024)
lim.max_hw_sectors = 1024;
- if (hostt->device_configure)
- ret = hostt->device_configure(sdev, &lim);
+ if (hostt->sdev_configure)
+ ret = hostt->sdev_configure(sdev, &lim);
else if (hostt->slave_configure)
ret = hostt->slave_configure(sdev);
if (ret) {
@@ -1097,12 +1097,12 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
}
/*
- * The queue_depth is often changed in ->device_configure.
+ * The queue_depth is often changed in ->sdev_configure.
*
* Set up budget map again since memory consumption of the map depends
* on actual queue depth.
*/
- if (hostt->device_configure || hostt->slave_configure)
+ if (hostt->sdev_configure || hostt->slave_configure)
scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
if (sdev->scsi_level >= SCSI_3)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 36410c2e1ee4..d6b4e9404087 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -5225,14 +5225,14 @@ static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth)
}
/**
- * ufshcd_device_configure - adjust SCSI device configurations
+ * ufshcd_sdev_configure - adjust SCSI device configurations
* @sdev: pointer to SCSI device
* @lim: queue limits
*
* Return: 0 (success).
*/
-static int ufshcd_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int ufshcd_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct ufs_hba *hba = shost_priv(sdev->host);
struct request_queue *q = sdev->request_queue;
@@ -8974,7 +8974,7 @@ static const struct scsi_host_template ufshcd_driver_template = {
.queuecommand = ufshcd_queuecommand,
.mq_poll = ufshcd_poll,
.sdev_init = ufshcd_sdev_init,
- .device_configure = ufshcd_device_configure,
+ .sdev_configure = ufshcd_sdev_configure,
.sdev_destroy = ufshcd_sdev_destroy,
.change_queue_depth = ufshcd_change_queue_depth,
.eh_abort_handler = ufshcd_abort,
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a64ce2aca9ec..7e2ee926200d 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -88,7 +88,7 @@ static int sdev_init (struct scsi_device *sdev)
return 0;
}
-static int device_configure(struct scsi_device *sdev, struct queue_limits *lim)
+static int sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct us_data *us = host_to_us(sdev->host);
struct device *dev = us->pusb_dev->bus->sysdev;
@@ -638,7 +638,7 @@ static const struct scsi_host_template usb_stor_host_template = {
.this_id = -1,
.sdev_init = sdev_init,
- .device_configure = device_configure,
+ .sdev_configure = sdev_configure,
.target_alloc = target_alloc,
/* lots of sg segments can be handled */
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 7bd2a314b329..0bb9ea875843 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -832,8 +832,8 @@ static int uas_sdev_init(struct scsi_device *sdev)
return 0;
}
-static int uas_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim)
+static int uas_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct uas_dev_info *devinfo = sdev->hostdata;
@@ -906,7 +906,7 @@ static const struct scsi_host_template uas_host_template = {
.queuecommand = uas_queuecommand,
.target_alloc = uas_target_alloc,
.sdev_init = uas_sdev_init,
- .device_configure = uas_device_configure,
+ .sdev_configure = uas_sdev_configure,
.eh_abort_handler = uas_eh_abort_handler,
.eh_device_reset_handler = uas_eh_device_reset_handler,
.this_id = -1,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3318004a1b18..59d6d17955fb 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1202,8 +1202,7 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
sector_t capacity, int geom[]);
extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
extern int ata_scsi_sdev_init(struct scsi_device *sdev);
-int ata_scsi_device_configure(struct scsi_device *sdev,
- struct queue_limits *lim);
+int ata_scsi_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim);
extern void ata_scsi_sdev_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
@@ -1303,8 +1302,8 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
extern void ata_port_free(struct ata_port *ap);
extern int ata_tport_add(struct device *parent, struct ata_port *ap);
extern void ata_tport_delete(struct ata_port *ap);
-int ata_sas_device_configure(struct scsi_device *sdev, struct queue_limits *lim,
- struct ata_port *ap);
+int ata_sas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim,
+ struct ata_port *ap);
extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
@@ -1470,13 +1469,13 @@ extern const struct attribute_group *ata_common_sdev_groups[];
__ATA_BASE_SHT(drv_name), \
.can_queue = ATA_DEF_QUEUE, \
.tag_alloc_policy = BLK_TAG_ALLOC_RR, \
- .device_configure = ata_scsi_device_configure
+ .sdev_configure = ata_scsi_sdev_configure
#define ATA_SUBBASE_SHT_QD(drv_name, drv_qd) \
__ATA_BASE_SHT(drv_name), \
.can_queue = drv_qd, \
.tag_alloc_policy = BLK_TAG_ALLOC_RR, \
- .device_configure = ata_scsi_device_configure
+ .sdev_configure = ata_scsi_sdev_configure
#define ATA_BASE_SHT(drv_name) \
ATA_SUBBASE_SHT(drv_name), \
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index f30f716ba045..ba460b6c0374 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -683,8 +683,7 @@ int sas_phy_reset(struct sas_phy *phy, int hard_reset);
int sas_phy_enable(struct sas_phy *phy, int enable);
extern int sas_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
extern int sas_target_alloc(struct scsi_target *);
-int sas_device_configure(struct scsi_device *dev,
- struct queue_limits *lim);
+int sas_sdev_configure(struct scsi_device *dev, struct queue_limits *lim);
extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
extern int sas_bios_param(struct scsi_device *, struct block_device *,
sector_t capacity, int *hsc);
@@ -750,7 +749,7 @@ void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
#endif
#define LIBSAS_SHT_BASE _LIBSAS_SHT_BASE \
- .device_configure = sas_device_configure, \
+ .sdev_configure = sas_sdev_configure, \
.sdev_init = sas_sdev_init, \
#define LIBSAS_SHT_BASE_NO_SLAVE_INIT _LIBSAS_SHT_BASE
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 58b29cc6de09..7e1b1a54e46a 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -212,10 +212,10 @@ struct scsi_host_template {
*
* Status: OPTIONAL
*
- * Note: slave_configure is the legacy version, use device_configure for
+ * Note: slave_configure is the legacy version, use sdev_configure for
* all new code. A driver must never define both.
*/
- int (* device_configure)(struct scsi_device *, struct queue_limits *lim);
+ int (* sdev_configure)(struct scsi_device *, struct queue_limits *lim);
int (* slave_configure)(struct scsi_device *);
/*
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 3/5] scsi: Convert SCSI drivers to .sdev_configure()
2024-10-22 18:07 [PATCH v4 0/5] Replace the "slave_*" function names Bart Van Assche
2024-10-22 18:07 ` [PATCH v4 1/5] scsi: Rename .slave_alloc() and .slave_destroy() Bart Van Assche
2024-10-22 18:07 ` [PATCH v4 2/5] scsi: Rename .device_configure() into .sdev_configure() Bart Van Assche
@ 2024-10-22 18:07 ` Bart Van Assche
2024-10-22 18:07 ` [PATCH v4 4/5] scsi: core: Remove the .slave_configure() method Bart Van Assche
` (3 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Bart Van Assche @ 2024-10-22 18:07 UTC (permalink / raw)
To: Martin K . Petersen
Cc: Damien Le Moal, Randy Dunlap, linux-scsi, Bart Van Assche,
Geoff Levand, Khalid Aziz, Jason Gunthorpe, Leon Romanovsky,
Sathya Prakash, Sreekanth Reddy, Suganath Prabu Subramani,
Steffen Maier, Benjamin Block, Heiko Carstens, Vasily Gorbik,
Alexander Gordeev, Adam Radford, James E.J. Bottomley,
Adaptec OEM Raid Solutions, Matthew Wilcox, Hannes Reinecke,
Anil Gurumurthy, Sudarsana Kalluru, Saurav Kashyap, Javed Hasan,
GR-QLogic-Storage-Upstream, Don Brace, Tyrel Datwyler,
Michael Ellerman, James Smart, Dick Kennedy, Nilesh Javali,
Karan Tilak Kumar, Sesidhar Baddela, K. Y. Srinivasan,
Haiyang Zhang, Wei Liu, Dexuan Cui, Juergen Gross,
Stefano Stabellini, Greg Kroah-Hartman, ching Huang,
Bjorn Helgaas, John Garry
The only difference between the .sdev_configure() and .slave_configure()
methods is that the former accepts an additional 'limits' argument.
Convert all SCSI drivers that define a .slave_configure() method to
.sdev_configure(). This patch prepares for removing the
.slave_configure() method. No functionality has been changed.
Acked-by: Geoff Levand <geoff@infradead.org> # for ps3rom
Acked-by: Khalid Aziz <khalid@gonehiking.org> # for the BusLogic driver
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/infiniband/ulp/srp/ib_srp.c | 5 +++--
drivers/message/fusion/mptfc.c | 2 +-
drivers/message/fusion/mptsas.c | 6 +++---
drivers/message/fusion/mptscsih.c | 4 ++--
drivers/message/fusion/mptscsih.h | 3 ++-
drivers/message/fusion/mptspi.c | 7 ++++---
drivers/s390/scsi/zfcp_scsi.c | 5 +++--
drivers/scsi/3w-9xxx.c | 7 ++++---
drivers/scsi/3w-sas.c | 7 ++++---
drivers/scsi/3w-xxxx.c | 8 ++++----
drivers/scsi/53c700.c | 7 ++++---
drivers/scsi/BusLogic.c | 7 ++++---
drivers/scsi/BusLogic.h | 3 ++-
drivers/scsi/aacraid/linit.c | 8 +++++---
drivers/scsi/advansys.c | 23 ++++++++++++-----------
drivers/scsi/aic7xxx/aic79xx_osm.c | 4 ++--
drivers/scsi/aic7xxx/aic7xxx_osm.c | 4 ++--
drivers/scsi/arcmsr/arcmsr_hba.c | 8 +++++---
drivers/scsi/bfa/bfad_im.c | 6 +++---
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 5 +++--
drivers/scsi/csiostor/csio_scsi.c | 6 +++---
drivers/scsi/esp_scsi.c | 6 +++---
drivers/scsi/hpsa.c | 8 +++++---
drivers/scsi/ibmvscsi/ibmvfc.c | 8 +++++---
drivers/scsi/ibmvscsi/ibmvscsi.c | 8 +++++---
drivers/scsi/ips.c | 6 +++---
drivers/scsi/ips.h | 3 ++-
drivers/scsi/lpfc/lpfc_scsi.c | 21 ++++++++++++++-------
drivers/scsi/mvumi.c | 5 +++--
drivers/scsi/myrb.c | 5 +++--
drivers/scsi/myrs.c | 5 +++--
drivers/scsi/ncr53c8xx.c | 5 +++--
drivers/scsi/ps3rom.c | 5 +++--
drivers/scsi/qedf/qedf_main.c | 5 +++--
drivers/scsi/qla1280.c | 6 +++---
drivers/scsi/qla2xxx/qla_os.c | 4 ++--
drivers/scsi/qlogicpti.c | 5 +++--
drivers/scsi/scsi_debug.c | 9 +++++----
drivers/scsi/scsi_scan.c | 2 +-
drivers/scsi/smartpqi/smartpqi_init.c | 5 +++--
drivers/scsi/snic/snic_main.c | 6 +++---
drivers/scsi/stex.c | 4 ++--
drivers/scsi/storvsc_drv.c | 5 +++--
drivers/scsi/sym53c8xx_2/sym_glue.c | 5 +++--
drivers/scsi/xen-scsifront.c | 7 ++++---
drivers/staging/rts5208/rtsx.c | 4 ++--
46 files changed, 164 insertions(+), 123 deletions(-)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 2916e77f589b..d17289803b99 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -2844,7 +2844,8 @@ static int srp_target_alloc(struct scsi_target *starget)
return 0;
}
-static int srp_slave_configure(struct scsi_device *sdev)
+static int srp_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct Scsi_Host *shost = sdev->host;
struct srp_target_port *target = host_to_target(shost);
@@ -3067,7 +3068,7 @@ static const struct scsi_host_template srp_template = {
.name = "InfiniBand SRP initiator",
.proc_name = DRV_NAME,
.target_alloc = srp_target_alloc,
- .slave_configure = srp_slave_configure,
+ .sdev_configure = srp_sdev_configure,
.info = srp_target_info,
.init_cmd_priv = srp_init_cmd_priv,
.exit_cmd_priv = srp_exit_cmd_priv,
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index f034ebacf974..0933b5f7fd29 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -114,7 +114,7 @@ static const struct scsi_host_template mptfc_driver_template = {
.queuecommand = mptfc_qcmd,
.target_alloc = mptfc_target_alloc,
.sdev_init = mptfc_sdev_init,
- .slave_configure = mptscsih_slave_configure,
+ .sdev_configure = mptscsih_sdev_configure,
.target_destroy = mptfc_target_destroy,
.sdev_destroy = mptscsih_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index ea9d0e6e7f08..9d4984adc705 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1710,7 +1710,7 @@ mptsas_firmware_event_work(struct work_struct *work)
static int
-mptsas_slave_configure(struct scsi_device *sdev)
+mptsas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct Scsi_Host *host = sdev->host;
MPT_SCSI_HOST *hd = shost_priv(host);
@@ -1736,7 +1736,7 @@ mptsas_slave_configure(struct scsi_device *sdev)
mptsas_add_device_component_starget(ioc, scsi_target(sdev));
out:
- return mptscsih_slave_configure(sdev);
+ return mptscsih_sdev_configure(sdev, lim);
}
static int
@@ -2006,7 +2006,7 @@ static const struct scsi_host_template mptsas_driver_template = {
.queuecommand = mptsas_qcmd,
.target_alloc = mptsas_target_alloc,
.sdev_init = mptsas_sdev_init,
- .slave_configure = mptsas_slave_configure,
+ .sdev_configure = mptsas_sdev_configure,
.target_destroy = mptsas_target_destroy,
.sdev_destroy = mptscsih_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 50ea4ee65d5c..a9604ba3c805 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2399,7 +2399,7 @@ mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
* Return non-zero if fails.
*/
int
-mptscsih_slave_configure(struct scsi_device *sdev)
+mptscsih_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct Scsi_Host *sh = sdev->host;
VirtTarget *vtarget;
@@ -3303,7 +3303,7 @@ EXPORT_SYMBOL(mptscsih_show_info);
EXPORT_SYMBOL(mptscsih_info);
EXPORT_SYMBOL(mptscsih_qcmd);
EXPORT_SYMBOL(mptscsih_sdev_destroy);
-EXPORT_SYMBOL(mptscsih_slave_configure);
+EXPORT_SYMBOL(mptscsih_sdev_configure);
EXPORT_SYMBOL(mptscsih_abort);
EXPORT_SYMBOL(mptscsih_dev_reset);
EXPORT_SYMBOL(mptscsih_target_reset);
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 9f1cde8e76a8..ece451c575e1 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -117,7 +117,8 @@ extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt);
extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
u8 id, u64 lun, int ctx2abort, ulong timeout);
extern void mptscsih_sdev_destroy(struct scsi_device *device);
-extern int mptscsih_slave_configure(struct scsi_device *device);
+extern int mptscsih_sdev_configure(struct scsi_device *device,
+ struct queue_limits *lim);
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
extern int mptscsih_dev_reset(struct scsi_cmnd * SCpnt);
extern int mptscsih_target_reset(struct scsi_cmnd * SCpnt);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 09828c34f8fb..6833013a6ba2 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -746,7 +746,8 @@ static int mptspi_sdev_init(struct scsi_device *sdev)
return 0;
}
-static int mptspi_slave_configure(struct scsi_device *sdev)
+static int mptspi_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct _MPT_SCSI_HOST *hd = shost_priv(sdev->host);
VirtTarget *vtarget = scsi_target(sdev)->hostdata;
@@ -754,7 +755,7 @@ static int mptspi_slave_configure(struct scsi_device *sdev)
mptspi_initTarget(hd, vtarget, sdev);
- ret = mptscsih_slave_configure(sdev);
+ ret = mptscsih_sdev_configure(sdev, lim);
if (ret)
return ret;
@@ -829,7 +830,7 @@ static const struct scsi_host_template mptspi_driver_template = {
.queuecommand = mptspi_qcmd,
.target_alloc = mptspi_target_alloc,
.sdev_init = mptspi_sdev_init,
- .slave_configure = mptspi_slave_configure,
+ .sdev_configure = mptspi_sdev_configure,
.target_destroy = mptspi_target_destroy,
.sdev_destroy = mptspi_sdev_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index c9cb9db8c2ee..b31f860af47b 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -49,7 +49,8 @@ static void zfcp_scsi_sdev_destroy(struct scsi_device *sdev)
put_device(&zfcp_sdev->port->dev);
}
-static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
+static int zfcp_scsi_sdev_configure(struct scsi_device *sdp,
+ struct queue_limits *lim)
{
if (sdp->tagged_supported)
scsi_change_queue_depth(sdp, default_depth);
@@ -428,7 +429,7 @@ static const struct scsi_host_template zfcp_scsi_host_template = {
.eh_target_reset_handler = zfcp_scsi_eh_target_reset_handler,
.eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler,
.sdev_init = zfcp_scsi_sdev_init,
- .slave_configure = zfcp_scsi_slave_configure,
+ .sdev_configure = zfcp_scsi_sdev_configure,
.sdev_destroy = zfcp_scsi_sdev_destroy,
.change_queue_depth = scsi_change_queue_depth,
.host_reset = zfcp_scsi_sysfs_host_reset,
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 6fb61c88ea11..97bcdf84386d 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1968,13 +1968,14 @@ static char *twa_string_lookup(twa_message_type *table, unsigned int code)
} /* End twa_string_lookup() */
/* This function gets called when a disk is coming on-line */
-static int twa_slave_configure(struct scsi_device *sdev)
+static int twa_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
/* Force 60 second timeout */
blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
return 0;
-} /* End twa_slave_configure() */
+} /* End twa_sdev_configure() */
static const struct scsi_host_template driver_template = {
.module = THIS_MODULE,
@@ -1984,7 +1985,7 @@ static const struct scsi_host_template driver_template = {
.bios_param = twa_scsi_biosparam,
.change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
- .slave_configure = twa_slave_configure,
+ .sdev_configure = twa_sdev_configure,
.this_id = -1,
.sg_tablesize = TW_APACHE_MAX_SGL_LENGTH,
.max_sectors = TW_MAX_SECTORS,
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index caa6713a62a4..8ed7126d82bb 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1523,13 +1523,14 @@ static void twl_shutdown(struct pci_dev *pdev)
} /* End twl_shutdown() */
/* This function configures unit settings when a unit is coming on-line */
-static int twl_slave_configure(struct scsi_device *sdev)
+static int twl_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
/* Force 60 second timeout */
blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
return 0;
-} /* End twl_slave_configure() */
+} /* End twl_sdev_configure() */
static const struct scsi_host_template driver_template = {
.module = THIS_MODULE,
@@ -1539,7 +1540,7 @@ static const struct scsi_host_template driver_template = {
.bios_param = twl_scsi_biosparam,
.change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
- .slave_configure = twl_slave_configure,
+ .sdev_configure = twl_sdev_configure,
.this_id = -1,
.sg_tablesize = TW_LIBERATOR_MAX_SGL_LENGTH,
.max_sectors = TW_MAX_SECTORS,
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 2c0fb6da0e60..82fb9dc8dac9 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -172,7 +172,7 @@
Initialize queues correctly when loading with no valid units.
1.02.00.034 - Fix tw_decode_bits() to handle multiple errors.
Add support for user configurable cmd_per_lun.
- Add support for sht->slave_configure().
+ Add support for sht->sdev_configure().
1.02.00.035 - Improve tw_allocate_memory() memory allocation.
Fix tw_chrdev_ioctl() to sleep correctly.
1.02.00.036 - Increase character ioctl timeout to 60 seconds.
@@ -2221,13 +2221,13 @@ static void tw_shutdown(struct pci_dev *pdev)
} /* End tw_shutdown() */
/* This function gets called when a disk is coming online */
-static int tw_slave_configure(struct scsi_device *sdev)
+static int tw_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
/* Force 60 second timeout */
blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
return 0;
-} /* End tw_slave_configure() */
+} /* End tw_sdev_configure() */
static const struct scsi_host_template driver_template = {
.module = THIS_MODULE,
@@ -2237,7 +2237,7 @@ static const struct scsi_host_template driver_template = {
.bios_param = tw_scsi_biosparam,
.change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
- .slave_configure = tw_slave_configure,
+ .sdev_configure = tw_sdev_configure,
.this_id = -1,
.sg_tablesize = TW_MAX_SGL_LENGTH,
.max_sectors = TW_MAX_SECTORS,
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 71c1d25f93b1..71b7ac027f48 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -159,7 +159,8 @@ STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
STATIC int NCR_700_sdev_init(struct scsi_device *SDpnt);
-STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
+STATIC int NCR_700_sdev_configure(struct scsi_device *SDpnt,
+ struct queue_limits *lim);
STATIC void NCR_700_sdev_destroy(struct scsi_device *SDpnt);
static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
@@ -330,7 +331,7 @@ NCR_700_detect(struct scsi_host_template *tpnt,
tpnt->can_queue = NCR_700_COMMAND_SLOTS_PER_HOST;
tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN;
- tpnt->slave_configure = NCR_700_slave_configure;
+ tpnt->sdev_configure = NCR_700_sdev_configure;
tpnt->sdev_destroy = NCR_700_sdev_destroy;
tpnt->sdev_init = NCR_700_sdev_init;
tpnt->change_queue_depth = NCR_700_change_queue_depth;
@@ -2029,7 +2030,7 @@ NCR_700_sdev_init(struct scsi_device *SDp)
}
STATIC int
-NCR_700_slave_configure(struct scsi_device *SDp)
+NCR_700_sdev_configure(struct scsi_device *SDp, struct queue_limits *lim)
{
struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 2135a2b3e2d0..d04b5feec2eb 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2153,14 +2153,15 @@ static void __init blogic_inithoststruct(struct blogic_adapter *adapter,
}
/*
- blogic_slaveconfig will actually set the queue depth on individual
+ blogic_sdev_configure will actually set the queue depth on individual
scsi devices as they are permanently added to the device chain. We
shamelessly rip off the SelectQueueDepths code to make this work mostly
like it used to. Since we don't get called once at the end of the scan
but instead get called for each device, we have to do things a bit
differently.
*/
-static int blogic_slaveconfig(struct scsi_device *dev)
+static int blogic_sdev_configure(struct scsi_device *dev,
+ struct queue_limits *lim)
{
struct blogic_adapter *adapter =
(struct blogic_adapter *) dev->host->hostdata;
@@ -3672,7 +3673,7 @@ static const struct scsi_host_template blogic_template = {
.name = "BusLogic",
.info = blogic_drvr_info,
.queuecommand = blogic_qcmd,
- .slave_configure = blogic_slaveconfig,
+ .sdev_configure = blogic_sdev_configure,
.bios_param = blogic_diskparam,
.eh_host_reset_handler = blogic_hostreset,
#if 0
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index 7d1ec10f2430..61bf26d4fc10 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -1274,7 +1274,8 @@ static inline void blogic_incszbucket(unsigned int *cmdsz_buckets,
static const char *blogic_drvr_info(struct Scsi_Host *);
static int blogic_qcmd(struct Scsi_Host *h, struct scsi_cmnd *);
static int blogic_diskparam(struct scsi_device *, struct block_device *, sector_t, int *);
-static int blogic_slaveconfig(struct scsi_device *);
+static int blogic_sdev_configure(struct scsi_device *,
+ struct queue_limits *lim);
static void blogic_qcompleted_ccb(struct blogic_ccb *);
static irqreturn_t blogic_inthandler(int, void *);
static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 68f4dbcfff49..91170a67cc91 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -377,15 +377,17 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
}
/**
- * aac_slave_configure - compute queue depths
+ * aac_sdev_configure - compute queue depths
* @sdev: SCSI device we are considering
+ * @lim: Request queue limits
*
* Selects queue depths for each target device based on the host adapter's
* total capacity and the queue depth supported by the target device.
* A queue depth of one automatically disables tagged queueing.
*/
-static int aac_slave_configure(struct scsi_device *sdev)
+static int aac_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
int chn, tid;
@@ -1487,7 +1489,7 @@ static const struct scsi_host_template aac_driver_template = {
.queuecommand = aac_queuecommand,
.bios_param = aac_biosparm,
.shost_groups = aac_host_groups,
- .slave_configure = aac_slave_configure,
+ .sdev_configure = aac_sdev_configure,
.change_queue_depth = aac_change_queue_depth,
.sdev_groups = aac_dev_groups,
.eh_abort_handler = aac_eh_abort,
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index fd4fcb37863d..8fededa1a751 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4496,7 +4496,7 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
/*
* Microcode operating variables for WDTR, SDTR, and command tag
- * queuing will be set in slave_configure() based on what a
+ * queuing will be set in sdev_configure() based on what a
* device reports it is capable of in Inquiry byte 7.
*
* If SCSI Bus Resets have been disabled, then directly set
@@ -5013,7 +5013,7 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
/*
* Microcode operating variables for WDTR, SDTR, and command tag
- * queuing will be set in slave_configure() based on what a
+ * queuing will be set in sdev_configure() based on what a
* device reports it is capable of in Inquiry byte 7.
*
* If SCSI Bus Resets have been disabled, then directly set
@@ -5508,7 +5508,7 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
/*
* Microcode operating variables for WDTR, SDTR, and command tag
- * queuing will be set in slave_configure() based on what a
+ * queuing will be set in sdev_configure() based on what a
* device reports it is capable of in Inquiry byte 7.
*
* If SCSI Bus Resets have been disabled, then directly set
@@ -7219,7 +7219,7 @@ static void AscAsyncFix(ASC_DVC_VAR *asc_dvc, struct scsi_device *sdev)
}
static void
-advansys_narrow_slave_configure(struct scsi_device *sdev, ASC_DVC_VAR *asc_dvc)
+advansys_narrow_sdev_configure(struct scsi_device *sdev, ASC_DVC_VAR *asc_dvc)
{
ASC_SCSI_BIT_ID_TYPE tid_bit = 1 << sdev->id;
ASC_SCSI_BIT_ID_TYPE orig_use_tagged_qng = asc_dvc->use_tagged_qng;
@@ -7345,7 +7345,7 @@ static void advansys_wide_enable_ppr(ADV_DVC_VAR *adv_dvc,
}
static void
-advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc)
+advansys_wide_sdev_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc)
{
AdvPortAddr iop_base = adv_dvc->iop_base;
unsigned short tidmask = 1 << sdev->id;
@@ -7391,16 +7391,17 @@ advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc)
* Set the number of commands to queue per device for the
* specified host adapter.
*/
-static int advansys_slave_configure(struct scsi_device *sdev)
+static int advansys_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct asc_board *boardp = shost_priv(sdev->host);
if (ASC_NARROW_BOARD(boardp))
- advansys_narrow_slave_configure(sdev,
- &boardp->dvc_var.asc_dvc_var);
+ advansys_narrow_sdev_configure(sdev,
+ &boardp->dvc_var.asc_dvc_var);
else
- advansys_wide_slave_configure(sdev,
- &boardp->dvc_var.adv_dvc_var);
+ advansys_wide_sdev_configure(sdev,
+ &boardp->dvc_var.adv_dvc_var);
return 0;
}
@@ -10612,7 +10613,7 @@ static const struct scsi_host_template advansys_template = {
.queuecommand = advansys_queuecommand,
.eh_host_reset_handler = advansys_reset,
.bios_param = advansys_biosparam,
- .slave_configure = advansys_slave_configure,
+ .sdev_configure = advansys_sdev_configure,
.cmd_size = sizeof(struct advansys_cmd),
};
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 2a137629e48d..17dfc3c72110 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -701,7 +701,7 @@ ahd_linux_sdev_init(struct scsi_device *sdev)
}
static int
-ahd_linux_slave_configure(struct scsi_device *sdev)
+ahd_linux_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
if (bootverbose)
sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
@@ -907,7 +907,7 @@ struct scsi_host_template aic79xx_driver_template = {
.max_sectors = 8192,
.cmd_per_lun = 2,
.sdev_init = ahd_linux_sdev_init,
- .slave_configure = ahd_linux_slave_configure,
+ .sdev_configure = ahd_linux_sdev_configure,
.target_alloc = ahd_linux_target_alloc,
.target_destroy = ahd_linux_target_destroy,
};
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 9066ab2ef6e3..cebf8c5d0caf 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -664,7 +664,7 @@ ahc_linux_sdev_init(struct scsi_device *sdev)
}
static int
-ahc_linux_slave_configure(struct scsi_device *sdev)
+ahc_linux_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
if (bootverbose)
sdev_printk(KERN_INFO, sdev, "Slave Configure\n");
@@ -792,7 +792,7 @@ struct scsi_host_template aic7xxx_driver_template = {
.max_sectors = 8192,
.cmd_per_lun = 2,
.sdev_init = ahc_linux_sdev_init,
- .slave_configure = ahc_linux_slave_configure,
+ .sdev_configure = ahc_linux_sdev_configure,
.target_alloc = ahc_linux_target_alloc,
.target_destroy = ahc_linux_target_destroy,
};
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 35860c61468b..6a32e3e0d516 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -143,7 +143,8 @@ static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock *);
static void arcmsr_wait_firmware_ready(struct AdapterControlBlock *acb);
static void arcmsr_set_iop_datetime(struct timer_list *);
-static int arcmsr_slave_config(struct scsi_device *sdev);
+static int arcmsr_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim);
static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth)
{
if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
@@ -160,7 +161,7 @@ static const struct scsi_host_template arcmsr_scsi_host_template = {
.eh_abort_handler = arcmsr_abort,
.eh_bus_reset_handler = arcmsr_bus_reset,
.bios_param = arcmsr_bios_param,
- .slave_configure = arcmsr_slave_config,
+ .sdev_configure = arcmsr_sdev_configure,
.change_queue_depth = arcmsr_adjust_disk_queue_depth,
.can_queue = ARCMSR_DEFAULT_OUTSTANDING_CMD,
.this_id = ARCMSR_SCSI_INITIATOR_ID,
@@ -3344,7 +3345,8 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd)
static DEF_SCSI_QCMD(arcmsr_queue_command)
-static int arcmsr_slave_config(struct scsi_device *sdev)
+static int arcmsr_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
unsigned int dev_timeout;
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 5729f429ed8b..a719a18f0fbc 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -783,7 +783,7 @@ bfad_thread_workq(struct bfad_s *bfad)
* Return non-zero if fails.
*/
static int
-bfad_im_slave_configure(struct scsi_device *sdev)
+bfad_im_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
scsi_change_queue_depth(sdev, bfa_lun_queue_depth);
return 0;
@@ -801,7 +801,7 @@ struct scsi_host_template bfad_im_scsi_host_template = {
.eh_target_reset_handler = bfad_im_reset_target_handler,
.sdev_init = bfad_im_sdev_init,
- .slave_configure = bfad_im_slave_configure,
+ .sdev_configure = bfad_im_sdev_configure,
.sdev_destroy = bfad_im_sdev_destroy,
.this_id = -1,
@@ -824,7 +824,7 @@ struct scsi_host_template bfad_im_vport_template = {
.eh_target_reset_handler = bfad_im_reset_target_handler,
.sdev_init = bfad_im_sdev_init,
- .slave_configure = bfad_im_slave_configure,
+ .sdev_configure = bfad_im_sdev_configure,
.sdev_destroy = bfad_im_sdev_destroy,
.this_id = -1,
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 938e38a01326..d75472622337 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -2652,7 +2652,8 @@ static int bnx2fc_cpu_offline(unsigned int cpu)
return 0;
}
-static int bnx2fc_slave_configure(struct scsi_device *sdev)
+static int bnx2fc_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
if (!bnx2fc_queue_depth)
return 0;
@@ -2959,7 +2960,7 @@ static struct scsi_host_template bnx2fc_shost_template = {
.dma_boundary = 0x7fff,
.max_sectors = 0x3fbf,
.track_queue_depth = 1,
- .slave_configure = bnx2fc_slave_configure,
+ .sdev_configure = bnx2fc_sdev_configure,
.shost_groups = bnx2fc_host_groups,
.cmd_size = sizeof(struct bnx2fc_priv),
};
diff --git a/drivers/scsi/csiostor/csio_scsi.c b/drivers/scsi/csiostor/csio_scsi.c
index fb6b0c8e22e0..36d31c31c8e4 100644
--- a/drivers/scsi/csiostor/csio_scsi.c
+++ b/drivers/scsi/csiostor/csio_scsi.c
@@ -2237,7 +2237,7 @@ csio_sdev_init(struct scsi_device *sdev)
}
static int
-csio_slave_configure(struct scsi_device *sdev)
+csio_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
scsi_change_queue_depth(sdev, csio_lun_qdepth);
return 0;
@@ -2277,7 +2277,7 @@ struct scsi_host_template csio_fcoe_shost_template = {
.eh_abort_handler = csio_eh_abort_handler,
.eh_device_reset_handler = csio_eh_lun_reset_handler,
.sdev_init = csio_sdev_init,
- .slave_configure = csio_slave_configure,
+ .sdev_configure = csio_sdev_configure,
.sdev_destroy = csio_sdev_destroy,
.scan_finished = csio_scan_finished,
.this_id = -1,
@@ -2296,7 +2296,7 @@ struct scsi_host_template csio_fcoe_shost_vport_template = {
.eh_abort_handler = csio_eh_abort_handler,
.eh_device_reset_handler = csio_eh_lun_reset_handler,
.sdev_init = csio_sdev_init,
- .slave_configure = csio_slave_configure,
+ .sdev_configure = csio_sdev_configure,
.sdev_destroy = csio_sdev_destroy,
.scan_finished = csio_scan_finished,
.this_id = -1,
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index d14a3383abb0..802718ffad84 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -2261,7 +2261,7 @@ static void esp_init_swstate(struct esp *esp)
INIT_LIST_HEAD(&esp->active_cmds);
INIT_LIST_HEAD(&esp->esp_cmd_pool);
- /* Start with a clear state, domain validation (via ->slave_configure,
+ /* Start with a clear state, domain validation (via ->sdev_configure,
* spi_dv_device()) will attempt to enable SYNC, WIDE, and tagged
* commands.
*/
@@ -2463,7 +2463,7 @@ static int esp_sdev_init(struct scsi_device *dev)
return 0;
}
-static int esp_slave_configure(struct scsi_device *dev)
+static int esp_sdev_configure(struct scsi_device *dev, struct queue_limits *lim)
{
struct esp *esp = shost_priv(dev->host);
struct esp_target_data *tp = &esp->target[dev->id];
@@ -2668,7 +2668,7 @@ const struct scsi_host_template scsi_esp_template = {
.target_alloc = esp_target_alloc,
.target_destroy = esp_target_destroy,
.sdev_init = esp_sdev_init,
- .slave_configure = esp_slave_configure,
+ .sdev_configure = esp_sdev_configure,
.sdev_destroy = esp_sdev_destroy,
.eh_abort_handler = esp_eh_abort_handler,
.eh_bus_reset_handler = esp_eh_bus_reset_handler,
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index eccdec143ad8..56b122cda86c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -284,7 +284,8 @@ static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_sdev_init(struct scsi_device *sdev);
-static int hpsa_slave_configure(struct scsi_device *sdev);
+static int hpsa_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim);
static void hpsa_sdev_destroy(struct scsi_device *sdev);
static void hpsa_update_scsi_devices(struct ctlr_info *h);
@@ -979,7 +980,7 @@ static const struct scsi_host_template hpsa_driver_template = {
.eh_device_reset_handler = hpsa_eh_device_reset_handler,
.ioctl = hpsa_ioctl,
.sdev_init = hpsa_sdev_init,
- .slave_configure = hpsa_slave_configure,
+ .sdev_configure = hpsa_sdev_configure,
.sdev_destroy = hpsa_sdev_destroy,
#ifdef CONFIG_COMPAT
.compat_ioctl = hpsa_compat_ioctl,
@@ -2142,7 +2143,8 @@ static int hpsa_sdev_init(struct scsi_device *sdev)
/* configure scsi device based on internal per-device structure */
#define CTLR_TIMEOUT (120 * HZ)
-static int hpsa_slave_configure(struct scsi_device *sdev)
+static int hpsa_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct hpsa_scsi_dev_t *sd;
int queue_depth;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 48417615bffe..ee606db81874 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3441,8 +3441,9 @@ static int ibmvfc_target_alloc(struct scsi_target *starget)
}
/**
- * ibmvfc_slave_configure - Configure the device
+ * ibmvfc_sdev_configure - Configure the device
* @sdev: struct scsi_device device to configure
+ * @lim: Request queue limits
*
* Enable allow_restart for a device if it is a disk. Adjust the
* queue_depth here also.
@@ -3450,7 +3451,8 @@ static int ibmvfc_target_alloc(struct scsi_target *starget)
* Returns:
* 0
**/
-static int ibmvfc_slave_configure(struct scsi_device *sdev)
+static int ibmvfc_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct Scsi_Host *shost = sdev->host;
unsigned long flags = 0;
@@ -3697,7 +3699,7 @@ static const struct scsi_host_template driver_template = {
.eh_target_reset_handler = ibmvfc_eh_target_reset_handler,
.eh_host_reset_handler = ibmvfc_eh_host_reset_handler,
.sdev_init = ibmvfc_sdev_init,
- .slave_configure = ibmvfc_slave_configure,
+ .sdev_configure = ibmvfc_sdev_configure,
.target_alloc = ibmvfc_target_alloc,
.scan_finished = ibmvfc_scan_finished,
.change_queue_depth = ibmvfc_change_queue_depth,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 71f3e9563520..16a1aac11911 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1860,14 +1860,16 @@ static void ibmvscsi_handle_crq(struct viosrp_crq *crq,
}
/**
- * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
+ * ibmvscsi_sdev_configure: Set the "allow_restart" flag for each disk.
* @sdev: struct scsi_device device to configure
+ * @lim: Request queue limits
*
* Enable allow_restart for a device if it is a disk. Adjust the
* queue_depth here also as is required by the documentation for
* struct scsi_host_template.
*/
-static int ibmvscsi_slave_configure(struct scsi_device *sdev)
+static int ibmvscsi_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct Scsi_Host *shost = sdev->host;
unsigned long lock_flags = 0;
@@ -2091,7 +2093,7 @@ static struct scsi_host_template driver_template = {
.eh_abort_handler = ibmvscsi_eh_abort_handler,
.eh_device_reset_handler = ibmvscsi_eh_device_reset_handler,
.eh_host_reset_handler = ibmvscsi_eh_host_reset_handler,
- .slave_configure = ibmvscsi_slave_configure,
+ .sdev_configure = ibmvscsi_sdev_configure,
.change_queue_depth = ibmvscsi_change_queue_depth,
.host_reset = ibmvscsi_host_reset,
.cmd_per_lun = IBMVSCSI_CMDS_PER_LUN_DEFAULT,
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 10cf5775a939..cce6c6b409ad 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -364,7 +364,7 @@ static struct scsi_host_template ips_driver_template = {
.proc_name = "ips",
.show_info = ips_show_info,
.write_info = ips_write_info,
- .slave_configure = ips_slave_configure,
+ .sdev_configure = ips_sdev_configure,
.bios_param = ips_biosparam,
.this_id = -1,
.sg_tablesize = IPS_MAX_SG,
@@ -1166,7 +1166,7 @@ static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
/****************************************************************************/
/* */
-/* Routine Name: ips_slave_configure */
+/* Routine Name: ips_sdev_configure */
/* */
/* Routine Description: */
/* */
@@ -1174,7 +1174,7 @@ static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
/* */
/****************************************************************************/
static int
-ips_slave_configure(struct scsi_device * SDptr)
+ips_sdev_configure(struct scsi_device *SDptr, struct queue_limits *lim)
{
ips_ha_t *ha;
int min;
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 65edf000e447..8ac932ec4444 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -400,7 +400,8 @@
*/
static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[]);
- static int ips_slave_configure(struct scsi_device *SDptr);
+ static int ips_sdev_configure(struct scsi_device *SDptr,
+ struct queue_limits *lim);
/*
* Raid Command Formats
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 3f408a47a36c..f3a48d722e69 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6342,8 +6342,9 @@ lpfc_sdev_init(struct scsi_device *sdev)
}
/**
- * lpfc_slave_configure - scsi_host_template slave_configure entry point
+ * lpfc_sdev_configure - scsi_host_template sdev_configure entry point
* @sdev: Pointer to scsi_device.
+ * @lim: Request queue limits.
*
* This routine configures following items
* - Tag command queuing support for @sdev if supported.
@@ -6353,7 +6354,7 @@ lpfc_sdev_init(struct scsi_device *sdev)
* 0 - Success
**/
static int
-lpfc_slave_configure(struct scsi_device *sdev)
+lpfc_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
@@ -6737,7 +6738,13 @@ lpfc_no_command(struct Scsi_Host *shost, struct scsi_cmnd *cmnd)
}
static int
-lpfc_no_sdev(struct scsi_device *sdev)
+lpfc_init_no_sdev(struct scsi_device *sdev)
+{
+ return -ENODEV;
+}
+
+static int
+lpfc_config_no_sdev(struct scsi_device *sdev, struct queue_limits *lim)
{
return -ENODEV;
}
@@ -6748,8 +6755,8 @@ struct scsi_host_template lpfc_template_nvme = {
.proc_name = LPFC_DRIVER_NAME,
.info = lpfc_info,
.queuecommand = lpfc_no_command,
- .sdev_init = lpfc_no_sdev,
- .slave_configure = lpfc_no_sdev,
+ .sdev_init = lpfc_init_no_sdev,
+ .sdev_configure = lpfc_config_no_sdev,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
.sg_tablesize = 1,
@@ -6773,7 +6780,7 @@ struct scsi_host_template lpfc_template = {
.eh_target_reset_handler = lpfc_target_reset_handler,
.eh_host_reset_handler = lpfc_host_reset_handler,
.sdev_init = lpfc_sdev_init,
- .slave_configure = lpfc_slave_configure,
+ .sdev_configure = lpfc_sdev_configure,
.sdev_destroy = lpfc_sdev_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
@@ -6800,7 +6807,7 @@ struct scsi_host_template lpfc_vport_template = {
.eh_bus_reset_handler = NULL,
.eh_host_reset_handler = NULL,
.sdev_init = lpfc_sdev_init,
- .slave_configure = lpfc_slave_configure,
+ .sdev_configure = lpfc_sdev_configure,
.sdev_destroy = lpfc_sdev_destroy,
.scan_finished = lpfc_scan_finished,
.this_id = -1,
diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
index d9d366ec17dc..96549e7f5705 100644
--- a/drivers/scsi/mvumi.c
+++ b/drivers/scsi/mvumi.c
@@ -2000,7 +2000,8 @@ static struct mvumi_instance_template mvumi_instance_9580 = {
.reset_host = mvumi_reset_host_9580,
};
-static int mvumi_slave_configure(struct scsi_device *sdev)
+static int mvumi_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct mvumi_hba *mhba;
unsigned char bitcount = sizeof(unsigned char) * 8;
@@ -2172,7 +2173,7 @@ static const struct scsi_host_template mvumi_template = {
.module = THIS_MODULE,
.name = "Marvell Storage Controller",
- .slave_configure = mvumi_slave_configure,
+ .sdev_configure = mvumi_sdev_configure,
.queuecommand = mvumi_queue_command,
.eh_timed_out = mvumi_timed_out,
.eh_host_reset_handler = mvumi_host_reset,
diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
index 3586830c392c..762b718fd82f 100644
--- a/drivers/scsi/myrb.c
+++ b/drivers/scsi/myrb.c
@@ -1715,7 +1715,8 @@ static int myrb_sdev_init(struct scsi_device *sdev)
return myrb_pdev_sdev_init(sdev);
}
-static int myrb_slave_configure(struct scsi_device *sdev)
+static int myrb_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct myrb_ldev_info *ldev_info;
@@ -2209,7 +2210,7 @@ static const struct scsi_host_template myrb_template = {
.queuecommand = myrb_queuecommand,
.eh_host_reset_handler = myrb_host_reset,
.sdev_init = myrb_sdev_init,
- .slave_configure = myrb_slave_configure,
+ .sdev_configure = myrb_sdev_configure,
.sdev_destroy = myrb_sdev_destroy,
.bios_param = myrb_biosparam,
.cmd_size = sizeof(struct myrb_cmdblk),
diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index 2d276e654c27..53e54f413c5c 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -1882,7 +1882,8 @@ static int myrs_sdev_init(struct scsi_device *sdev)
return 0;
}
-static int myrs_slave_configure(struct scsi_device *sdev)
+static int myrs_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct myrs_hba *cs = shost_priv(sdev->host);
struct myrs_ldev_info *ldev_info;
@@ -1922,7 +1923,7 @@ static const struct scsi_host_template myrs_template = {
.queuecommand = myrs_queuecommand,
.eh_host_reset_handler = myrs_host_reset,
.sdev_init = myrs_sdev_init,
- .slave_configure = myrs_slave_configure,
+ .sdev_configure = myrs_sdev_configure,
.sdev_destroy = myrs_sdev_destroy,
.cmd_size = sizeof(struct myrs_cmdblk),
.shost_groups = myrs_shost_groups,
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 526411dff48f..a06b7d7ae96b 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -7796,7 +7796,8 @@ static int ncr53c8xx_sdev_init(struct scsi_device *device)
return 0;
}
-static int ncr53c8xx_slave_configure(struct scsi_device *device)
+static int ncr53c8xx_sdev_configure(struct scsi_device *device,
+ struct queue_limits *lim)
{
struct Scsi_Host *host = device->host;
struct ncb *np = ((struct host_data *) host->hostdata)->ncb;
@@ -8093,7 +8094,7 @@ struct Scsi_Host * __init ncr_attach(struct scsi_host_template *tpnt,
tpnt->shost_groups = ncr53c8xx_host_groups;
tpnt->queuecommand = ncr53c8xx_queue_command;
- tpnt->slave_configure = ncr53c8xx_slave_configure;
+ tpnt->sdev_configure = ncr53c8xx_sdev_configure;
tpnt->sdev_init = ncr53c8xx_sdev_init;
tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset;
tpnt->can_queue = SCSI_NCR_CAN_QUEUE;
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index 90495a832f34..92fe5c5c5bb0 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -61,7 +61,8 @@ enum lv1_atapi_in_out {
};
-static int ps3rom_slave_configure(struct scsi_device *scsi_dev)
+static int ps3rom_sdev_configure(struct scsi_device *scsi_dev,
+ struct queue_limits *lim)
{
struct ps3rom_private *priv = shost_priv(scsi_dev->host);
struct ps3_storage_device *dev = priv->dev;
@@ -325,7 +326,7 @@ static irqreturn_t ps3rom_interrupt(int irq, void *data)
static const struct scsi_host_template ps3rom_host_template = {
.name = DEVICE_NAME,
- .slave_configure = ps3rom_slave_configure,
+ .sdev_configure = ps3rom_sdev_configure,
.queuecommand = ps3rom_queuecommand,
.can_queue = 1,
.this_id = 7,
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index df756f3eef3e..41bce7a7d6c2 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -982,7 +982,8 @@ static int qedf_eh_host_reset(struct scsi_cmnd *sc_cmd)
return SUCCESS;
}
-static int qedf_slave_configure(struct scsi_device *sdev)
+static int qedf_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
if (qedf_queue_depth) {
scsi_change_queue_depth(sdev, qedf_queue_depth);
@@ -1003,7 +1004,7 @@ static const struct scsi_host_template qedf_host_template = {
.eh_device_reset_handler = qedf_eh_device_reset, /* lun reset */
.eh_target_reset_handler = qedf_eh_target_reset, /* target reset */
.eh_host_reset_handler = qedf_eh_host_reset,
- .slave_configure = qedf_slave_configure,
+ .sdev_configure = qedf_sdev_configure,
.dma_boundary = QED_HW_DMA_BOUNDARY,
.sg_tablesize = QEDF_MAX_BDS_PER_CMD,
.can_queue = FCOE_PARAMS_NUM_TASKS,
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 8958547ac111..360867838abd 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1159,7 +1159,7 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
/**************************************************************************
- * qla1280_slave_configure
+ * qla1280_sdev_configure
*
* Description:
* Determines the queue depth for a given device. There are two ways
@@ -1170,7 +1170,7 @@ qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
* default queue depth (dependent on the number of hardware SCBs).
**************************************************************************/
static int
-qla1280_slave_configure(struct scsi_device *device)
+qla1280_sdev_configure(struct scsi_device *device, struct queue_limits *lim)
{
struct scsi_qla_host *ha;
int default_depth = 3;
@@ -4121,7 +4121,7 @@ static const struct scsi_host_template qla1280_driver_template = {
.proc_name = "qla1280",
.name = "Qlogic ISP 1280/12160",
.info = qla1280_info,
- .slave_configure = qla1280_slave_configure,
+ .sdev_configure = qla1280_sdev_configure,
.queuecommand = qla1280_queuecommand,
.eh_abort_handler = qla1280_eh_abort,
.eh_device_reset_handler= qla1280_eh_device_reset,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 686e69d3ec98..6b7388cfc55e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1947,7 +1947,7 @@ qla2xxx_sdev_init(struct scsi_device *sdev)
}
static int
-qla2xxx_slave_configure(struct scsi_device *sdev)
+qla2xxx_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
scsi_qla_host_t *vha = shost_priv(sdev->host);
struct req_que *req = vha->req;
@@ -8086,7 +8086,7 @@ struct scsi_host_template qla2xxx_driver_template = {
.eh_bus_reset_handler = qla2xxx_eh_bus_reset,
.eh_host_reset_handler = qla2xxx_eh_host_reset,
- .slave_configure = qla2xxx_slave_configure,
+ .sdev_configure = qla2xxx_sdev_configure,
.sdev_init = qla2xxx_sdev_init,
.sdev_destroy = qla2xxx_sdev_destroy,
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 6177f4798f3a..cc632c6b603a 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -975,7 +975,8 @@ static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int
host->sg_tablesize = QLOGICPTI_MAX_SG(num_free);
}
-static int qlogicpti_slave_configure(struct scsi_device *sdev)
+static int qlogicpti_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct qlogicpti *qpti = shost_priv(sdev->host);
int tgt = sdev->id;
@@ -1292,7 +1293,7 @@ static const struct scsi_host_template qpti_template = {
.name = "qlogicpti",
.info = qlogicpti_info,
.queuecommand = qlogicpti_queuecommand,
- .slave_configure = qlogicpti_slave_configure,
+ .sdev_configure = qlogicpti_sdev_configure,
.eh_abort_handler = qlogicpti_abort,
.eh_host_reset_handler = qlogicpti_reset,
.can_queue = QLOGICPTI_REQ_QUEUE_LEN,
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 8a0951245a94..36f34597b5e8 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -5890,14 +5890,15 @@ static int scsi_debug_sdev_init(struct scsi_device *sdp)
return 0;
}
-static int scsi_debug_slave_configure(struct scsi_device *sdp)
+static int scsi_debug_sdev_configure(struct scsi_device *sdp,
+ struct queue_limits *lim)
{
struct sdebug_dev_info *devip =
(struct sdebug_dev_info *)sdp->hostdata;
struct dentry *dentry;
if (sdebug_verbose)
- pr_info("slave_configure <%u %u %u %llu>\n",
+ pr_info("sdev_configure <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (sdp->host->max_cmd_len != SDEBUG_MAX_CMD_LEN)
sdp->host->max_cmd_len = SDEBUG_MAX_CMD_LEN;
@@ -8715,8 +8716,8 @@ static struct scsi_host_template sdebug_driver_template = {
.name = "SCSI DEBUG",
.info = scsi_debug_info,
.sdev_init = scsi_debug_sdev_init,
- .slave_configure = scsi_debug_slave_configure,
- .sdev_destroy = scsi_debug_sdev_destroy,
+ .sdev_configure = scsi_debug_sdev_configure,
+ .sdev_destroy = scsi_debug_sdev_destroy,
.ioctl = scsi_debug_ioctl,
.queuecommand = scsi_debug_queuecommand,
.change_queue_depth = sdebug_change_qdepth,
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index b60c218dc0d0..abd2da3ef45f 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -316,7 +316,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
sdev->hostdata = hostdata;
/* if the device needs this changing, it may do so in the
- * slave_configure function */
+ * sdev_configure function */
sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED;
/*
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index c51f760306c7..f93e55f5acf3 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6558,7 +6558,8 @@ static inline bool pqi_is_tape_changer_device(struct pqi_scsi_dev *device)
return device->devtype == TYPE_TAPE || device->devtype == TYPE_MEDIUM_CHANGER;
}
-static int pqi_slave_configure(struct scsi_device *sdev)
+static int pqi_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
int rc = 0;
struct pqi_scsi_dev *device;
@@ -7550,7 +7551,7 @@ static const struct scsi_host_template pqi_driver_template = {
.eh_abort_handler = pqi_eh_abort_handler,
.ioctl = pqi_ioctl,
.sdev_init = pqi_sdev_init,
- .slave_configure = pqi_slave_configure,
+ .sdev_configure = pqi_sdev_configure,
.sdev_destroy = pqi_sdev_destroy,
.map_queues = pqi_map_queues,
.sdev_groups = pqi_sdev_groups,
diff --git a/drivers/scsi/snic/snic_main.c b/drivers/scsi/snic/snic_main.c
index 14830b6ab94b..d3cf50088a37 100644
--- a/drivers/scsi/snic/snic_main.c
+++ b/drivers/scsi/snic/snic_main.c
@@ -57,11 +57,11 @@ snic_sdev_init(struct scsi_device *sdev)
}
/*
- * snic_slave_configure : callback function to SCSI Mid Layer, called on
+ * snic_sdev_configure : callback function to SCSI Mid Layer, called on
* scsi device initialization.
*/
static int
-snic_slave_configure(struct scsi_device *sdev)
+snic_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
struct snic *snic = shost_priv(sdev->host);
u32 qdepth = 0, max_ios = 0;
@@ -108,7 +108,7 @@ static const struct scsi_host_template snic_host_template = {
.eh_device_reset_handler = snic_device_reset,
.eh_host_reset_handler = snic_host_reset,
.sdev_init = snic_sdev_init,
- .slave_configure = snic_slave_configure,
+ .sdev_configure = snic_sdev_configure,
.change_queue_depth = snic_change_queue_depth,
.this_id = -1,
.cmd_per_lun = SNIC_DFLT_QUEUE_DEPTH,
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 0e81125df8c7..0e5c7609dcc4 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -584,7 +584,7 @@ static void return_abnormal_state(struct st_hba *hba, int status)
spin_unlock_irqrestore(hba->host->host_lock, flags);
}
static int
-stex_slave_config(struct scsi_device *sdev)
+stex_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
@@ -1481,7 +1481,7 @@ static const struct scsi_host_template driver_template = {
.proc_name = DRV_NAME,
.bios_param = stex_biosparam,
.queuecommand = stex_queuecommand,
- .slave_configure = stex_slave_config,
+ .sdev_configure = stex_sdev_configure,
.eh_abort_handler = stex_abort,
.eh_host_reset_handler = stex_reset,
.this_id = -1,
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 0f18591539e7..eab32abf1f49 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1574,7 +1574,8 @@ static int storvsc_device_alloc(struct scsi_device *sdevice)
return 0;
}
-static int storvsc_device_configure(struct scsi_device *sdevice)
+static int storvsc_sdev_configure(struct scsi_device *sdevice,
+ struct queue_limits *lim)
{
blk_queue_rq_timeout(sdevice->request_queue, (storvsc_timeout * HZ));
@@ -1876,7 +1877,7 @@ static struct scsi_host_template scsi_driver = {
.proc_name = "storvsc_host",
.eh_timed_out = storvsc_eh_timed_out,
.sdev_init = storvsc_device_alloc,
- .slave_configure = storvsc_device_configure,
+ .sdev_configure = storvsc_sdev_configure,
.cmd_per_lun = 2048,
.this_id = -1,
/* Ensure there are no gaps in presented sgls */
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index e7a17f87027d..9b8cb7319370 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -825,7 +825,8 @@ static int sym53c8xx_sdev_init(struct scsi_device *sdev)
/*
* Linux entry point for device queue sizing.
*/
-static int sym53c8xx_slave_configure(struct scsi_device *sdev)
+static int sym53c8xx_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct sym_hcb *np = sym_get_hcb(sdev->host);
struct sym_tcb *tp = &np->target[sdev->id];
@@ -1685,7 +1686,7 @@ static const struct scsi_host_template sym2_template = {
.cmd_size = sizeof(struct sym_ucmd),
.queuecommand = sym53c8xx_queue_command,
.sdev_init = sym53c8xx_sdev_init,
- .slave_configure = sym53c8xx_slave_configure,
+ .sdev_configure = sym53c8xx_sdev_configure,
.sdev_destroy = sym53c8xx_sdev_destroy,
.eh_abort_handler = sym53c8xx_eh_abort_handler,
.eh_target_reset_handler = sym53c8xx_eh_target_reset_handler,
diff --git a/drivers/scsi/xen-scsifront.c b/drivers/scsi/xen-scsifront.c
index 8ac3b284c2ef..924025305753 100644
--- a/drivers/scsi/xen-scsifront.c
+++ b/drivers/scsi/xen-scsifront.c
@@ -735,7 +735,8 @@ static int scsifront_dev_reset_handler(struct scsi_cmnd *sc)
return scsifront_action_handler(sc, VSCSIIF_ACT_SCSI_RESET);
}
-static int scsifront_sdev_configure(struct scsi_device *sdev)
+static int scsifront_sdev_configure(struct scsi_device *sdev,
+ struct queue_limits *lim)
{
struct vscsifrnt_info *info = shost_priv(sdev->host);
int err;
@@ -776,7 +777,7 @@ static const struct scsi_host_template scsifront_sht = {
.queuecommand = scsifront_queuecommand,
.eh_abort_handler = scsifront_eh_abort_handler,
.eh_device_reset_handler = scsifront_dev_reset_handler,
- .slave_configure = scsifront_sdev_configure,
+ .sdev_configure = scsifront_sdev_configure,
.sdev_destroy = scsifront_sdev_destroy,
.cmd_per_lun = VSCSIIF_DEFAULT_CMD_PER_LUN,
.can_queue = VSCSIIF_MAX_REQS,
@@ -1074,7 +1075,7 @@ static void scsifront_do_lun_hotplug(struct vscsifrnt_info *info, int op)
continue;
/*
- * Front device state path, used in slave_configure called
+ * Front device state path, used in sdev_configure called
* on successfull scsi_add_device, and in sdev_destroy called
* on remove of a device.
*/
diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
index 6851a28f5ec6..2ee5d6341b53 100644
--- a/drivers/staging/rts5208/rtsx.c
+++ b/drivers/staging/rts5208/rtsx.c
@@ -68,7 +68,7 @@ static int sdev_init(struct scsi_device *sdev)
return 0;
}
-static int slave_configure(struct scsi_device *sdev)
+static int sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
{
/* Set the SCSI level to at least 2. We'll leave it at 3 if that's
* what is originally reported. We need this to avoid confusing
@@ -199,7 +199,7 @@ static const struct scsi_host_template rtsx_host_template = {
.this_id = -1,
.sdev_init = sdev_init,
- .slave_configure = slave_configure,
+ .sdev_configure = sdev_configure,
/* lots of sg segments can be handled */
.sg_tablesize = SG_ALL,
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 4/5] scsi: core: Remove the .slave_configure() method
2024-10-22 18:07 [PATCH v4 0/5] Replace the "slave_*" function names Bart Van Assche
` (2 preceding siblings ...)
2024-10-22 18:07 ` [PATCH v4 3/5] scsi: Convert SCSI drivers to .sdev_configure() Bart Van Assche
@ 2024-10-22 18:07 ` Bart Van Assche
2024-10-22 18:07 ` [PATCH v4 5/5] scsi: core: Update API documentation Bart Van Assche
` (2 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Bart Van Assche @ 2024-10-22 18:07 UTC (permalink / raw)
To: Martin K . Petersen
Cc: Damien Le Moal, Randy Dunlap, linux-scsi, Bart Van Assche,
James E.J. Bottomley
Now that all SCSI drivers have been converted from .slave_configure() to
.sdev_configure(), remove support for .slave_configure() from the SCSI
core.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/scsi_scan.c | 4 +---
include/scsi/scsi_host.h | 10 +++-------
2 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index abd2da3ef45f..f478c7c4ea24 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1076,8 +1076,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
if (hostt->sdev_configure)
ret = hostt->sdev_configure(sdev, &lim);
- else if (hostt->slave_configure)
- ret = hostt->slave_configure(sdev);
if (ret) {
queue_limits_cancel_update(sdev->request_queue);
/*
@@ -1102,7 +1100,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
* Set up budget map again since memory consumption of the map depends
* on actual queue depth.
*/
- if (hostt->sdev_configure || hostt->slave_configure)
+ if (hostt->sdev_configure)
scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
if (sdev->scsi_level >= SCSI_3)
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 7e1b1a54e46a..8fccfd27393e 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -169,11 +169,11 @@ struct scsi_host_template {
*
* Deallocation: If we didn't find any devices at this ID, you will
* get an immediate call to sdev_destroy(). If we find something
- * here then you will get a call to slave_configure(), then the
+ * here then you will get a call to sdev_configure(), then the
* device will be used for however long it is kept around, then when
* the device is removed from the system (or * possibly at reboot
* time), you will then get a call to sdev_destroy(). This is
- * assuming you implement slave_configure and sdev_destroy.
+ * assuming you implement sdev_configure and sdev_destroy.
* However, if you allocate memory and hang it off the device struct,
* then you must implement the sdev_destroy() routine at a minimum
* in order to avoid leaking memory
@@ -211,19 +211,15 @@ struct scsi_host_template {
* up after yourself before returning non-0
*
* Status: OPTIONAL
- *
- * Note: slave_configure is the legacy version, use sdev_configure for
- * all new code. A driver must never define both.
*/
int (* sdev_configure)(struct scsi_device *, struct queue_limits *lim);
- int (* slave_configure)(struct scsi_device *);
/*
* Immediately prior to deallocating the device and after all activity
* has ceased the mid layer calls this point so that the low level
* driver may completely detach itself from the scsi device and vice
* versa. The low level driver is responsible for freeing any memory
- * it allocated in the sdev_init or slave_configure calls.
+ * it allocated in the sdev_init or sdev_configure calls.
*
* Status: OPTIONAL
*/
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v4 5/5] scsi: core: Update API documentation
2024-10-22 18:07 [PATCH v4 0/5] Replace the "slave_*" function names Bart Van Assche
` (3 preceding siblings ...)
2024-10-22 18:07 ` [PATCH v4 4/5] scsi: core: Remove the .slave_configure() method Bart Van Assche
@ 2024-10-22 18:07 ` Bart Van Assche
2024-10-22 21:30 ` Damien Le Moal
2024-12-05 0:57 ` [PATCH v4 0/5] Replace the "slave_*" function names Randy Dunlap
2024-12-10 2:35 ` Martin K. Petersen
6 siblings, 1 reply; 12+ messages in thread
From: Bart Van Assche @ 2024-10-22 18:07 UTC (permalink / raw)
To: Martin K . Petersen
Cc: Damien Le Moal, Randy Dunlap, linux-scsi, Bart Van Assche,
Jonathan Corbet
Since the .slave_alloc(), .slave_destroy() and .slave_configure() methods
have been renamed in struct scsi_host_template, also rename these in the
API documentation.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
Documentation/scsi/scsi_mid_low_api.rst | 78 ++++++++++++-------------
1 file changed, 39 insertions(+), 39 deletions(-)
diff --git a/Documentation/scsi/scsi_mid_low_api.rst b/Documentation/scsi/scsi_mid_low_api.rst
index 2df29b92e196..a93df7c3ae50 100644
--- a/Documentation/scsi/scsi_mid_low_api.rst
+++ b/Documentation/scsi/scsi_mid_low_api.rst
@@ -112,9 +112,9 @@ Those usages in group c) should be handled with care, especially in a
that are shared with the mid level and other layers.
All functions defined within an LLD and all data defined at file scope
-should be static. For example the slave_alloc() function in an LLD
+should be static. For example the sdev_init() function in an LLD
called "xxx" could be defined as
-``static int xxx_slave_alloc(struct scsi_device * sdev) { /* code */ }``
+``static int xxx_sdev_init(struct scsi_device * sdev) { /* code */ }``
.. [#] the scsi_host_alloc() function is a replacement for the rather vaguely
named scsi_register() function in most situations.
@@ -149,21 +149,21 @@ scsi devices of which only the first 2 respond::
scsi_add_host() ---->
scsi_scan_host() -------+
|
- slave_alloc()
- slave_configure() --> scsi_change_queue_depth()
+ sdev_init()
+ sdev_configure() --> scsi_change_queue_depth()
|
- slave_alloc()
- slave_configure()
+ sdev_init()
+ sdev_configure()
|
- slave_alloc() ***
- slave_destroy() ***
+ sdev_init() ***
+ sdev_destroy() ***
*** For scsi devices that the mid level tries to scan but do not
- respond, a slave_alloc(), slave_destroy() pair is called.
+ respond, a sdev_init(), sdev_destroy() pair is called.
If the LLD wants to adjust the default queue settings, it can invoke
-scsi_change_queue_depth() in its slave_configure() routine.
+scsi_change_queue_depth() in its sdev_configure() routine.
When an HBA is being removed it could be as part of an orderly shutdown
associated with the LLD module being unloaded (e.g. with the "rmmod"
@@ -176,8 +176,8 @@ same::
===----------------------=========-----------------===------
scsi_remove_host() ---------+
|
- slave_destroy()
- slave_destroy()
+ sdev_destroy()
+ sdev_destroy()
scsi_host_put()
It may be useful for a LLD to keep track of struct Scsi_Host instances
@@ -202,8 +202,8 @@ An LLD can use this sequence to make the mid level aware of a SCSI device::
===-------------------=========--------------------===------
scsi_add_device() ------+
|
- slave_alloc()
- slave_configure() [--> scsi_change_queue_depth()]
+ sdev_init()
+ sdev_configure() [--> scsi_change_queue_depth()]
In a similar fashion, an LLD may become aware that a SCSI device has been
removed (unplugged) or the connection to it has been interrupted. Some
@@ -218,12 +218,12 @@ upper layers with this sequence::
===----------------------=========-----------------===------
scsi_remove_device() -------+
|
- slave_destroy()
+ sdev_destroy()
It may be useful for an LLD to keep track of struct scsi_device instances
-(a pointer is passed as the parameter to slave_alloc() and
-slave_configure() callbacks). Such instances are "owned" by the mid-level.
-struct scsi_device instances are freed after slave_destroy().
+(a pointer is passed as the parameter to sdev_init() and
+sdev_configure() callbacks). Such instances are "owned" by the mid-level.
+struct scsi_device instances are freed after sdev_destroy().
Reference Counting
@@ -331,7 +331,7 @@ Details::
* bus scan when an HBA is added (i.e. scsi_scan_host()). So it
* should only be called if the HBA becomes aware of a new scsi
* device (lu) after scsi_scan_host() has completed. If successful
- * this call can lead to slave_alloc() and slave_configure() callbacks
+ * this call can lead to sdev_init() and sdev_configure() callbacks
* into the LLD.
*
* Defined in: drivers/scsi/scsi_scan.c
@@ -374,8 +374,8 @@ Details::
* Might block: no
*
* Notes: Can be invoked any time on a SCSI device controlled by this
- * LLD. [Specifically during and after slave_configure() and prior to
- * slave_destroy().] Can safely be invoked from interrupt code.
+ * LLD. [Specifically during and after sdev_configure() and prior to
+ * sdev_destroy().] Can safely be invoked from interrupt code.
*
* Defined in: drivers/scsi/scsi.c [see source code for more notes]
*
@@ -506,7 +506,7 @@ Details::
* Notes: If an LLD becomes aware that a scsi device (lu) has
* been removed but its host is still present then it can request
* the removal of that scsi device. If successful this call will
- * lead to the slave_destroy() callback being invoked. sdev is an
+ * lead to the sdev_destroy() callback being invoked. sdev is an
* invalid pointer after this call.
*
* Defined in: drivers/scsi/scsi_sysfs.c .
@@ -627,14 +627,14 @@ Interface functions are supplied (defined) by LLDs and their function
pointers are placed in an instance of struct scsi_host_template which
is passed to scsi_host_alloc() [or scsi_register() / init_this_scsi_driver()].
Some are mandatory. Interface functions should be declared static. The
-accepted convention is that driver "xyz" will declare its slave_configure()
+accepted convention is that driver "xyz" will declare its sdev_configure()
function as::
- static int xyz_slave_configure(struct scsi_device * sdev);
+ static int xyz_sdev_configure(struct scsi_device * sdev);
and so forth for all interface functions listed below.
-A pointer to this function should be placed in the 'slave_configure' member
+A pointer to this function should be placed in the 'sdev_configure' member
of a "struct scsi_host_template" instance. A pointer to such an instance
should be passed to the mid level's scsi_host_alloc() [or scsi_register() /
init_this_scsi_driver()].
@@ -657,9 +657,9 @@ Summary:
- ioctl - driver can respond to ioctls
- proc_info - supports /proc/scsi/{driver_name}/{host_no}
- queuecommand - queue scsi command, invoke 'done' on completion
- - slave_alloc - prior to any commands being sent to a new device
- - slave_configure - driver fine tuning for given device after attach
- - slave_destroy - given device is about to be shut down
+ - sdev_init - prior to any commands being sent to a new device
+ - sdev_configure - driver fine tuning for given device after attach
+ - sdev_destroy - given device is about to be shut down
Details::
@@ -960,7 +960,7 @@ Details::
/**
- * slave_alloc - prior to any commands being sent to a new device
+ * sdev_init - prior to any commands being sent to a new device
* (i.e. just prior to scan) this call is made
* @sdp: pointer to new device (about to be scanned)
*
@@ -975,24 +975,24 @@ Details::
* prior to its initial scan. The corresponding scsi device may not
* exist but the mid level is just about to scan for it (i.e. send
* and INQUIRY command plus ...). If a device is found then
- * slave_configure() will be called while if a device is not found
- * slave_destroy() is called.
+ * sdev_configure() will be called while if a device is not found
+ * sdev_destroy() is called.
* For more details see the include/scsi/scsi_host.h file.
*
* Optionally defined in: LLD
**/
- int slave_alloc(struct scsi_device *sdp)
+ int sdev_init(struct scsi_device *sdp)
/**
- * slave_configure - driver fine tuning for given device just after it
+ * sdev_configure - driver fine tuning for given device just after it
* has been first scanned (i.e. it responded to an
* INQUIRY)
* @sdp: device that has just been attached
*
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is taken offline. [offline devices will _not_ have
- * slave_destroy() called on them so clean up resources.]
+ * sdev_destroy() called on them so clean up resources.]
*
* Locks: none
*
@@ -1004,11 +1004,11 @@ Details::
*
* Optionally defined in: LLD
**/
- int slave_configure(struct scsi_device *sdp)
+ int sdev_configure(struct scsi_device *sdp)
/**
- * slave_destroy - given device is about to be shut down. All
+ * sdev_destroy - given device is about to be shut down. All
* activity has ceased on this device.
* @sdp: device that is about to be shut down
*
@@ -1023,12 +1023,12 @@ Details::
* by this driver for given device should be freed now. No further
* commands will be sent for this sdp instance. [However the device
* could be re-attached in the future in which case a new instance
- * of struct scsi_device would be supplied by future slave_alloc()
- * and slave_configure() calls.]
+ * of struct scsi_device would be supplied by future sdev_init()
+ * and sdev_configure() calls.]
*
* Optionally defined in: LLD
**/
- void slave_destroy(struct scsi_device *sdp)
+ void sdev_destroy(struct scsi_device *sdp)
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v4 0/5] Replace the "slave_*" function names
2024-10-22 18:07 [PATCH v4 0/5] Replace the "slave_*" function names Bart Van Assche
` (4 preceding siblings ...)
2024-10-22 18:07 ` [PATCH v4 5/5] scsi: core: Update API documentation Bart Van Assche
@ 2024-12-05 0:57 ` Randy Dunlap
2024-12-05 3:30 ` Bart Van Assche
2024-12-05 20:00 ` Martin K. Petersen
2024-12-10 2:35 ` Martin K. Petersen
6 siblings, 2 replies; 12+ messages in thread
From: Randy Dunlap @ 2024-12-05 0:57 UTC (permalink / raw)
To: Bart Van Assche, Martin K . Petersen; +Cc: Damien Le Moal, linux-scsi
Hi--
On 10/22/24 11:07 AM, Bart Van Assche wrote:
> Hi Martin,
>
> The text "slave_" in multiple function names does not make it clear what
> the purpose of these functions is. Hence this patch series that renames all
> SCSI functions that have the word "slave" in their function name. Please
> consider this patch series for the next merge window.
>
> Thanks,
>
> Bart.
for patches 1 & 3: this file has been removed: (using quilt & patch)
--------------------------
|diff --git a/drivers/staging/rts5208/rtsx.c b/drivers/staging/rts5208/rtsx.c
|index 6851a28f5ec6..2ee5d6341b53 100644
|--- a/drivers/staging/rts5208/rtsx.c
|+++ b/drivers/staging/rts5208/rtsx.c
--------------------------
No file to patch. Skipping patch.
For the documentation changes in all 5 patches:
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Can we expect to see this merged for 6.13-rcN soonish?
I am working on some patches that would like to be applied
after this series.
>
> Changes compared to v3:
> - Combined two Documentation/scsi/scsi_mid_low_api.rst patches into a single
> patch.
>
> Changes compared to v2:
> - Renamed sdev_prep() into sdev_init().
> - Dropped the patches again that remove SCSI LLD changelog files.
>
> Changes compared to v1:
> - Switch to the names proposed by Matthew Wilcox.
> - Included a patch that renames .device_configure() into .sdev_configure().
> - Split off the documentation changes into a separate patch as requested by
> Damien.
> - Added 5 patches that remove obsolete SCSI LLD changelog files.
>
> Bart Van Assche (5):
> scsi: Rename .slave_alloc() and .slave_destroy()
> scsi: Rename .device_configure() into .sdev_configure()
> scsi: Convert SCSI drivers to .sdev_configure()
> scsi: core: Remove the .slave_configure() method
> scsi: core: Update API documentation
Thanks.
--
~Randy
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v4 0/5] Replace the "slave_*" function names
2024-12-05 0:57 ` [PATCH v4 0/5] Replace the "slave_*" function names Randy Dunlap
@ 2024-12-05 3:30 ` Bart Van Assche
2024-12-05 20:00 ` Martin K. Petersen
1 sibling, 0 replies; 12+ messages in thread
From: Bart Van Assche @ 2024-12-05 3:30 UTC (permalink / raw)
To: Randy Dunlap, Martin K . Petersen; +Cc: Damien Le Moal, linux-scsi
On 12/5/24 8:57 AM, Randy Dunlap wrote:
> Can we expect to see this merged for 6.13-rcN soonish?
Thanks for the reminder Randy. I'm currently traveling and I plan to
rebase and repost this patch series next week.
Bart.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4 0/5] Replace the "slave_*" function names
2024-12-05 0:57 ` [PATCH v4 0/5] Replace the "slave_*" function names Randy Dunlap
2024-12-05 3:30 ` Bart Van Assche
@ 2024-12-05 20:00 ` Martin K. Petersen
2024-12-05 21:05 ` Randy Dunlap
1 sibling, 1 reply; 12+ messages in thread
From: Martin K. Petersen @ 2024-12-05 20:00 UTC (permalink / raw)
To: Randy Dunlap
Cc: Bart Van Assche, Martin K . Petersen, Damien Le Moal, linux-scsi
Randy,
> Can we expect to see this merged for 6.13-rcN soonish?
>
> I am working on some patches that would like to be applied
> after this series.
Already merged, it's in 6.14/scsi-staging.
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4 0/5] Replace the "slave_*" function names
2024-12-05 20:00 ` Martin K. Petersen
@ 2024-12-05 21:05 ` Randy Dunlap
0 siblings, 0 replies; 12+ messages in thread
From: Randy Dunlap @ 2024-12-05 21:05 UTC (permalink / raw)
To: Martin K. Petersen; +Cc: Bart Van Assche, Damien Le Moal, linux-scsi
On 12/5/24 12:00 PM, Martin K. Petersen wrote:
>
> Randy,
>
>> Can we expect to see this merged for 6.13-rcN soonish?
>>
>> I am working on some patches that would like to be applied
>> after this series.
>
> Already merged, it's in 6.14/scsi-staging.
Ah good. I was looking at the linux-next tree.
thanks.
--
~Randy
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v4 0/5] Replace the "slave_*" function names
2024-10-22 18:07 [PATCH v4 0/5] Replace the "slave_*" function names Bart Van Assche
` (5 preceding siblings ...)
2024-12-05 0:57 ` [PATCH v4 0/5] Replace the "slave_*" function names Randy Dunlap
@ 2024-12-10 2:35 ` Martin K. Petersen
6 siblings, 0 replies; 12+ messages in thread
From: Martin K. Petersen @ 2024-12-10 2:35 UTC (permalink / raw)
To: Bart Van Assche
Cc: Martin K . Petersen, Damien Le Moal, Randy Dunlap, linux-scsi
On Tue, 22 Oct 2024 11:07:52 -0700, Bart Van Assche wrote:
> The text "slave_" in multiple function names does not make it clear what
> the purpose of these functions is. Hence this patch series that renames all
> SCSI functions that have the word "slave" in their function name. Please
> consider this patch series for the next merge window.
>
> Thanks,
>
> [...]
Applied to 6.14/scsi-queue, thanks!
[1/5] scsi: Rename .slave_alloc() and .slave_destroy()
https://git.kernel.org/mkp/scsi/c/ed638918f4df
[2/5] scsi: Rename .device_configure() into .sdev_configure()
https://git.kernel.org/mkp/scsi/c/47c2e30afcec
[3/5] scsi: Convert SCSI drivers to .sdev_configure()
https://git.kernel.org/mkp/scsi/c/49515b7fe50c
[4/5] scsi: core: Remove the .slave_configure() method
https://git.kernel.org/mkp/scsi/c/0f98212d96a2
[5/5] scsi: core: Update API documentation
https://git.kernel.org/mkp/scsi/c/b0d3b8514abd
--
Martin K. Petersen Oracle Linux Engineering
^ permalink raw reply [flat|nested] 12+ messages in thread