* [PATCH v2] serial: samsung: add support for manual RTS setting
@ 2013-09-18 15:52 José Miguel Gonçalves
2013-09-18 17:17 ` Tomasz Figa
0 siblings, 1 reply; 2+ messages in thread
From: José Miguel Gonçalves @ 2013-09-18 15:52 UTC (permalink / raw)
To: t.figa
Cc: Greg Kroah-Hartman, linux-samsung-soc, linux-serial, linux-kernel,
heiko, s.nawrocki, José Miguel Gonçalves
The Samsung serial driver currently does not support setting the
RTS pin with an ioctl(TIOCMSET) call. This patch adds this support.
Changes in v2:
- Preserve the RTS pin's manual setting in set_termios() also when
enabling CRTSCTS.
Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt>
---
drivers/tty/serial/samsung.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index f3dfa19..401ef4f 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -407,7 +407,14 @@ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- /* todo - possibly remove AFC and do manual CTS */
+ unsigned int umcon = rd_regl(port, S3C2410_UMCON);
+
+ if (mctrl & TIOCM_RTS)
+ umcon |= S3C2410_UMCOM_RTS_LOW;
+ else
+ umcon &= ~S3C2410_UMCOM_RTS_LOW;
+
+ wr_regl(port, S3C2410_UMCON, umcon);
}
static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
@@ -774,8 +781,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
if (termios->c_cflag & CSTOPB)
ulcon |= S3C2410_LCON_STOPB;
- umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
-
if (termios->c_cflag & PARENB) {
if (termios->c_cflag & PARODD)
ulcon |= S3C2410_LCON_PODD;
@@ -792,6 +797,15 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
+
+ umcon = rd_regl(port, S3C2410_UMCON);
+ if (termios->c_cflag & CRTSCTS) {
+ umcon |= S3C2410_UMCOM_AFC;
+ /* Disable RTS when RX FIFO contains 63 bytes */
+ umcon &= ~S3C2412_UMCON_AFC_8;
+ } else {
+ umcon &= ~S3C2410_UMCOM_AFC;
+ }
wr_regl(port, S3C2410_UMCON, umcon);
if (ourport->info->has_divslot)
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v2] serial: samsung: add support for manual RTS setting
2013-09-18 15:52 [PATCH v2] serial: samsung: add support for manual RTS setting José Miguel Gonçalves
@ 2013-09-18 17:17 ` Tomasz Figa
0 siblings, 0 replies; 2+ messages in thread
From: Tomasz Figa @ 2013-09-18 17:17 UTC (permalink / raw)
To: José Miguel Gonçalves
Cc: t.figa, Greg Kroah-Hartman, linux-samsung-soc, linux-serial,
linux-kernel, heiko, s.nawrocki
Hi José,
On Wednesday 18 of September 2013 16:52:49 José Miguel Gonçalves wrote:
> The Samsung serial driver currently does not support setting the
> RTS pin with an ioctl(TIOCMSET) call. This patch adds this support.
>
> Changes in v2:
> - Preserve the RTS pin's manual setting in set_termios() also when
> enabling CRTSCTS.
>
> Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt>
> ---
> drivers/tty/serial/samsung.c | 20 +++++++++++++++++---
> 1 file changed, 17 insertions(+), 3 deletions(-)
Looks good.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-09-18 17:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-18 15:52 [PATCH v2] serial: samsung: add support for manual RTS setting José Miguel Gonçalves
2013-09-18 17:17 ` Tomasz Figa
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox