[PATCH v3 1/6] serial: 8250: Store to lsr_save_flags after lsr read

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

Not all LSR register flags are preserved across reads. Therefore, LSR
readers must store the non-preserved bits into lsr_save_flags.

This fix was initially mixed into feature commit f6f586102add ("serial:
8250: Handle UART without interrupt on TEMT using em485"). However,
that feature change had a flaw and it was reverted to make room for
simpler approach providing the same feature. The embedded fix got
reverted with the feature change.

Re-add the lsr_save_flags fix and properly mark it's a fix.

Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250")
Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc
Co-developed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_port.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 4998799abae2..c5e0f925f4b6 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1511,6 +1511,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
 		unsigned char lsr = serial_in(p, UART_LSR);
 		u64 stop_delay = 0;
 
+		p->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+
 		if (!(lsr & UART_LSR_THRE))
 			return;
 		/*
-- 
2.30.2