[PATCH v4 6/7] serial: omap: do not override settings for RS485 support

[Lino Sanfilippo <l.sanfilippo@kunbus.com>]

In serial_omap_rs485() RS485 support may be deactivated due to a missing
RTS GPIO. This is done by nullifying the ports rs485_supported struct.
After that however the serial_omap_rs485_supported struct is assigned to
the same structure unconditionally, which results in an unintended
reactivation of RS485 support.
Fix this by callling serial_omap_rs485() after the assignment of
rs485_supported.

Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified")
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
---
 drivers/tty/serial/omap-serial.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 0ead88c5a19a..4f7ee4392034 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1604,10 +1604,6 @@ static int serial_omap_probe(struct platform_device *pdev)
 		dev_info(up->port.dev, "no wakeirq for uart%d\n",
 			 up->port.line);
 
-	ret = serial_omap_probe_rs485(up, &pdev->dev);
-	if (ret < 0)
-		goto err_rs485;
-
 	sprintf(up->name, "OMAP UART%d", up->port.line);
 	up->port.mapbase = mem->start;
 	up->port.membase = base;
@@ -1622,6 +1618,10 @@ static int serial_omap_probe(struct platform_device *pdev)
 			 DEFAULT_CLK_SPEED);
 	}
 
+	ret = serial_omap_probe_rs485(up, &pdev->dev);
+	if (ret < 0)
+		goto err_rs485;
+
 	up->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
 	up->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE;
 	cpu_latency_qos_add_request(&up->pm_qos_request, up->latency);
-- 
2.40.1