[PATCH v3 0/4] Introduce ExynosAutov920 SoC and SADK board

[PATCH v3 0/4] Introduce ExynosAutov920 SoC and SADK board

[Jaewon Kim]

ExynosAutov920[1] is ARMv8-based automotive-oriented SoC.
This SoC is the next generation of exynosautov9 and AE(Automotive Enhanced)
IPs are used for safety.

This patchset is the minimal set for ExynosAutov920 SoC and SADK board.
Currently, ramdisk console is available and Clock, UFS, and USI will be
added after this patchset.

[1] : https://semiconductor.samsung.com/processor/automotive-processor/exynos-auto-v920

---
Changes in v3:
 - Split pinctrl driver change patch  and v920 support patch
 - Remove 'combine' variable and use offset variable
 - Fix coding style warning in checkpatch with --strict option
 - Fix CHECK_DTBS=y waring with W=1 option
 - dt-binding document merged in v2

Changes in v2:
 - Rebase to git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
             branch : for-v6.8/samsung-bindings-compatibles
 - Specific exynosautov920 compatible
 - Add dt-binding patch for pmu, chipid


Jaewon Kim (4):
  arm64: dts: exynos: add initial support for exynosautov920 SoC
  arm64: dts: exynos: add minimal support for exynosautov920 sadk board
  pinctrl: samsung: support ExynosAuto GPIO structure
  pinctrl: samsung: add exynosautov920 pinctrl

 arch/arm64/boot/dts/exynos/Makefile           |    3 +-
 .../dts/exynos/exynosautov920-pinctrl.dtsi    | 1266 +++++++++++++++++
 .../boot/dts/exynos/exynosautov920-sadk.dts   |   88 ++
 .../arm64/boot/dts/exynos/exynosautov920.dtsi |  314 ++++
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    |  140 ++
 drivers/pinctrl/samsung/pinctrl-exynos.c      |   99 +-
 drivers/pinctrl/samsung/pinctrl-exynos.h      |   25 +
 drivers/pinctrl/samsung/pinctrl-samsung.c     |    5 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |   13 +
 9 files changed, 1945 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920.dtsi

-- 
2.43.0

[PATCH v3 1/4] arm64: dts: exynos: add initial support for exynosautov920 SoC

[Jaewon Kim]

Samsung ExynosAutov920 is ARMv8-based automotive-oriented SoC.
It has AE(Automotive Enhanced) IPs for safety.
 * Cortex-A78AE 10-cores
 * GIC-600AE

This is minimal support for ExynosAutov920 SoC.
 * Enumerate all pinctrl nodes
 * Enable Chip-Id
 * Serial0 for console
 * PWM

Since the clock driver is not yet implemented, it is supported as
fixed-clock.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
---
 .../dts/exynos/exynosautov920-pinctrl.dtsi    | 1266 +++++++++++++++++
 .../arm64/boot/dts/exynos/exynosautov920.dtsi |  314 ++++
 2 files changed, 1580 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920.dtsi

diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
new file mode 100644
index 000000000000..63b958b96c48
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi
@@ -0,0 +1,1266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi0 {
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi1 {
+	gph8: gph8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2 {
+	gph3: gph3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph4: gph4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph5: gph5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph6: gph6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_hsi2ufs {
+	gph2: gph2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC0_USI00 */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI01 */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI02 */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI03 */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI04 */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI05 */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI06 */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI07 */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC0_USI08 */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC0 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI00 */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI01 */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI02 */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI03 */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI04 */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI05 */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI06 */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI07 */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC0 USI08 */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC0 */
+	i3c0_bus: i3c0-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c1_bus: i3c1-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c2_bus: i3c2-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c3_bus: i3c3-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PWM PERIC0 */
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp9: gpp9-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp10: gpp10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp11: gpp11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp12: gpp12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* UART PERIC1 USI09 */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI10 */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI11 */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI12 */
+	uart12_bus: uart12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart12_bus_dual: uart12-bus-dual-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1_USI13 */
+	uart13_bus: uart13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart13_bus_dual: uart13-bus-dual-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI14 */
+	uart14_bus: uart14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart14_bus_dual: uart14-bus-dual-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI15 */
+	uart15_bus: uart15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart15_bus_dual: uart15-bus-dual-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI16 */
+	uart16_bus: uart16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart16_bus_dual: uart16-bus-dual-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* UART PERIC1 USI17 */
+	uart17_bus: uart17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart17_bus_dual: uart17-bus-dual-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp10-2", "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12 */
+	hsi2c24_bus: hsi2c24-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI12_I2C */
+	hsi2c25_bus: hsi2c25-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13 */
+	hsi2c26_bus: hsi2c26-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI13_I2C */
+	hsi2c27_bus: hsi2c27-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14 */
+	hsi2c28_bus: hsi2c28-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI14_I2C */
+	hsi2c29_bus: hsi2c29-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15 */
+	hsi2c30_bus: hsi2c30-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI15_I2C */
+	hsi2c31_bus: hsi2c31-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16 */
+	hsi2c32_bus: hsi2c32-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI16_I2C */
+	hsi2c33_bus: hsi2c33-bus-pins {
+		samsung,pins = "gpp9-2", "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17 */
+	hsi2c34_bus: hsi2c34-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I2C PERIC1 USI17_I2C */
+	hsi2c35_bus: hsi2c35-bus-pins {
+		samsung,pins = "gpp12-2", "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI09 */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI10 */
+	spi10_bus: spi10-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI11 */
+	spi11_bus: spi11-bus-pins {
+		samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp10-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI12 */
+	spi12_bus: spi12-bus-pins {
+		samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs: spi12-cs-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi12_cs_func: spi12-cs-func-pins {
+		samsung,pins = "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI13 */
+	spi13_bus: spi13-bus-pins {
+		samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs: spi13-cs-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi13_cs_func: spi13-cs-func-pins {
+		samsung,pins = "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI14 */
+	spi14_bus: spi14-bus-pins {
+		samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs: spi14-cs-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi14_cs_func: spi14-cs-func-pins {
+		samsung,pins = "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI15 */
+	spi15_bus: spi15-bus-pins {
+		samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs: spi15-cs-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi15_cs_func: spi15-cs-func-pins {
+		samsung,pins = "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI16 */
+	spi16_bus: spi16-bus-pins {
+		samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs: spi16-cs-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi16_cs_func: spi16-cs-func-pins {
+		samsung,pins = "gpp9-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI PERIC1 USI17 */
+	spi17_bus: spi17-bus-pins {
+		samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs: spi17-cs-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi17_cs_func: spi17-cs-func-pins {
+		samsung,pins = "gpp12-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* I3C PERIC1 */
+	i3c4_bus: i3c4-bus-pins {
+		samsung,pins = "gpp7-2", "gpp7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c5_bus: i3c5-bus-pins {
+		samsung,pins = "gpp7-6", "gpp7-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c6_bus: i3c6-bus-pins {
+		samsung,pins = "gpp8-2", "gpp8-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i3c7_bus: i3c7-bus-pins {
+		samsung,pins = "gpp11-2", "gpp11-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
new file mode 100644
index 000000000000..8756df584b10
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SoC device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov920";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_hsi0;
+		pinctrl3 = &pinctrl_hsi1;
+		pinctrl4 = &pinctrl_hsi2;
+		pinctrl5 = &pinctrl_hsi2ufs;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	xtcxo: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	/*
+	 * FIXME: Keep the stub clock for serial driver, until proper clock
+	 * driver is implemented.
+	 */
+	clock_usi: clock-usi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "usi";
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+		};
+
+		cpu8: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20000>;
+			enable-method = "psci";
+		};
+
+		cpu9: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78ae";
+			reg = <0x0 0x20100>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynosautov920-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10400000 0x10000>,
+			      <0x10460000 0x140000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x11850000 0x10000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov920-wakeup-eint",
+					     "samsung,exynos850-wakeup-eint",
+					     "samsung,exynos7-wakeup-eint";
+			};
+		};
+
+		pinctrl_aud: pinctrl@1a460000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x1a460000 0x10000>;
+		};
+
+		pinctrl_hsi0: pinctrl@16040000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16040000 0x10000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi1: pinctrl@16450000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16450000 0x10000>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2: pinctrl@16c10000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16c10000 0x10000>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi2ufs: pinctrl@16d20000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x16d20000 0x10000>;
+			interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric0: pinctrl@10830000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10830000 0x10000>;
+			interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10c30000 {
+			compatible = "samsung,exynosautov920-pinctrl";
+			reg = <0x10c30000 0x10000>;
+			interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynosautov920-pmu",
+				     "samsung,exynos7-pmu","syscon";
+			reg = <0x11860000 0x10000>;
+		};
+
+		pwm: pwm@109b0000 {
+			compatible = "samsung,exynosautov920-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x109b0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		syscon_peric0: syscon@10820000 {
+			compatible = "samsung,exynosautov920-peric0-sysreg",
+				     "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		syscon_peric1: syscon@10c20000 {
+			compatible = "samsung,exynosautov920-peric1-sysreg",
+				     "syscon";
+			reg = <0x10c20000 0x2000>;
+		};
+
+		usi_0: usi@108800c0 {
+			compatible = "samsung,exynosautov920-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x108800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&clock_usi>, <&clock_usi>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10880000 {
+				compatible = "samsung,exynosautov920-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10880000 0xc0>;
+				interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&clock_usi>, <&clock_usi>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "exynosautov920-pinctrl.dtsi"
-- 
2.43.0

Re: (subset) [PATCH v3 1/4] arm64: dts: exynos: add initial support for exynosautov920 SoC

[Krzysztof Kozlowski]

On Fri, 08 Dec 2023 16:45:24 +0900, Jaewon Kim wrote:
> Samsung ExynosAutov920 is ARMv8-based automotive-oriented SoC.
> It has AE(Automotive Enhanced) IPs for safety.
>  * Cortex-A78AE 10-cores
>  * GIC-600AE
> 
> This is minimal support for ExynosAutov920 SoC.
>  * Enumerate all pinctrl nodes
>  * Enable Chip-Id
>  * Serial0 for console
>  * PWM
> 
> [...]

Applied, thanks!

[1/4] arm64: dts: exynos: add initial support for exynosautov920 SoC
      https://git.kernel.org/krzk/linux/c/c96dab1993d247b7b05ba2fdef8f185cbbd5454e

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: (subset) [PATCH v3 1/4] arm64: dts: exynos: add initial support for exynosautov920 SoC

[Krzysztof Kozlowski]

On 11/12/2023 08:42, Krzysztof Kozlowski wrote:
> 
> On Fri, 08 Dec 2023 16:45:24 +0900, Jaewon Kim wrote:
>> Samsung ExynosAutov920 is ARMv8-based automotive-oriented SoC.
>> It has AE(Automotive Enhanced) IPs for safety.
>>  * Cortex-A78AE 10-cores
>>  * GIC-600AE
>>
>> This is minimal support for ExynosAutov920 SoC.
>>  * Enumerate all pinctrl nodes
>>  * Enable Chip-Id
>>  * Serial0 for console
>>  * PWM
>>
>> [...]
> 
> Applied, thanks!
> 
> [1/4] arm64: dts: exynos: add initial support for exynosautov920 SoC
>       https://git.kernel.org/krzk/linux/c/c96dab1993d247b7b05ba2fdef8f185cbbd5454e

With changes:

Re-order nodes to match coding style: UFS reset pins,
gpg/gpp in peric0 and peric1, all nodes in the soc@0;
drop fallback compatibles from wakeup-interrupt-controller

Best regards,
Krzysztof

[PATCH v3 2/4] arm64: dts: exynos: add minimal support for exynosautov920 sadk board

[Jaewon Kim]

ExynosAutov920 SADK is ExynosAutov920 SoC based SADK(Samsung Automotive
Development Kit) board. It has 16GB(8GB + 8GB) LPDDR5 RAM and 256GB
(128GB + 128GB) UFS.

This is minimal support board device-tree.
 * Serial console
 * GPIO Key
 * PWM FAN

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
---
 arch/arm64/boot/dts/exynos/Makefile           |  3 +-
 .../boot/dts/exynos/exynosautov920-sadk.dts   | 88 +++++++++++++++++++
 2 files changed, 90 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts

diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 6e4ba69268e5..da06e1a9456c 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -5,4 +5,5 @@ dtb-$(CONFIG_ARCH_EXYNOS) += \
 	exynos7-espresso.dtb		\
 	exynos7885-jackpotlte.dtb	\
 	exynos850-e850-96.dtb		\
-	exynosautov9-sadk.dtb
+	exynosautov9-sadk.dtb		\
+	exynosautov920-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
new file mode 100644
index 000000000000..e250b5594b58
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov920 SADK board device tree source
+ *
+ * Copyright (c) 2023 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov920.dtsi"
+#include "exynos-pinctrl.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Samsung ExynosAutov920 SADK board";
+	compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>,
+		      <0x8 0x80000000 0x1 0xfba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_wakeup &key_back>;
+
+		key-wakeup {
+			label = "KEY_WAKEUP";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpa0 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		key-back {
+			label = "KEY_BACK";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpp6 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl_alive {
+	key_wakeup: key-wakeup-pins {
+		samsung,pins = "gpa0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pinctrl_peric1 {
+	key_back: key-back-pins {
+		samsung,pins = "gpp6-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout0>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <38400000>;
+};
-- 
2.43.0

Re: (subset) [PATCH v3 2/4] arm64: dts: exynos: add minimal support for exynosautov920 sadk board

[Krzysztof Kozlowski]

On Fri, 08 Dec 2023 16:45:25 +0900, Jaewon Kim wrote:
> ExynosAutov920 SADK is ExynosAutov920 SoC based SADK(Samsung Automotive
> Development Kit) board. It has 16GB(8GB + 8GB) LPDDR5 RAM and 256GB
> (128GB + 128GB) UFS.
> 
> This is minimal support board device-tree.
>  * Serial console
>  * GPIO Key
>  * PWM FAN
> 
> [...]

Applied, thanks!

[2/4] arm64: dts: exynos: add minimal support for exynosautov920 sadk board
      https://git.kernel.org/krzk/linux/c/57de428eaca2b9af1a35df96c7adcad4b5ea79f9

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[PATCH v3 3/4] pinctrl: samsung: support ExynosAuto GPIO structure

[Jaewon Kim]

New ExynosAuto series GPIO have a different register structure.
In the existing Exynos series, EINT control register enumerated after
a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
However, from ExynosAutov920 SoC, the register that controls EINT belongs
to each GPIO bank, and each GPIO bank has 0x1000 align.

This is a structure to protect the GPIO bank using S2MPU in VM environment,
and will only be applied in ExynosAuto series SoCs.

-------------------------------------------------
| original		| ExynosAutov920	|
|-----------------------------------------------|
| 0x0	GPIO_CON	| 0x0	GPIO_CON	|
| 0x4	GPIO_DAT	| 0x4	GPIO_DAT	|
| 0x8	GPIO_PUD	| 0x8	GPIO_PUD	|
| 0xc	GPIO_DRV	| 0xc	GPIO_DRV	|
| 0x10	GPIO_CONPDN	| 0x10	GPIO_CONPDN	|
| 0x14	GPIO_PUDPDN	| 0x14	GPIO_PUDPDN	|
| 0x700	EINT_CON	| 0x18	EINT_CON	|
| 0x800	EINT_FLTCON	| 0x1c	EINT_FLTCON0	|
| 0x900	EINT_MASK	| 0x20	EINT_FLTCON1	|
| 0xa00	EINT_PEND	| 0x24	EINT_MASK	|
|			| 0x28	EINT_PEND	|
-------------------------------------------------

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
---
 drivers/pinctrl/samsung/pinctrl-exynos.c  | 81 +++++++++++++++++++++--
 drivers/pinctrl/samsung/pinctrl-exynos.h  |  1 +
 drivers/pinctrl/samsung/pinctrl-samsung.c |  3 +
 drivers/pinctrl/samsung/pinctrl-samsung.h | 12 ++++
 4 files changed, 90 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index 6b58ec84e34b..f798f64b1122 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -56,6 +56,9 @@ static void exynos_irq_mask(struct irq_data *irqd)
 	unsigned int mask;
 	unsigned long flags;
 
+	if (bank->eint_mask_offset)
+		reg_mask = bank->pctl_offset + bank->eint_mask_offset;
+
 	raw_spin_lock_irqsave(&bank->slock, flags);
 
 	mask = readl(bank->eint_base + reg_mask);
@@ -72,6 +75,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
 	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
 	unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
 
+	if (bank->eint_pend_offset)
+		reg_pend = bank->pctl_offset + bank->eint_pend_offset;
+
 	writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
 }
 
@@ -95,6 +101,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
 	if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
 		exynos_irq_ack(irqd);
 
+	if (bank->eint_mask_offset)
+		reg_mask = bank->pctl_offset + bank->eint_mask_offset;
+
 	raw_spin_lock_irqsave(&bank->slock, flags);
 
 	mask = readl(bank->eint_base + reg_mask);
@@ -139,6 +148,9 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
 	else
 		irq_set_handler_locked(irqd, handle_level_irq);
 
+	if (bank->eint_con_offset)
+		reg_con = bank->pctl_offset + bank->eint_con_offset;
+
 	con = readl(bank->eint_base + reg_con);
 	con &= ~(EXYNOS_EINT_CON_MASK << shift);
 	con |= trig_type << shift;
@@ -221,6 +233,18 @@ static const struct exynos_irq_chip exynos_gpio_irq_chip __initconst = {
 	/* eint_wake_mask_value not used */
 };
 
+static const struct exynos_irq_chip exynosauto_gpio_irq_chip __initconst = {
+	.chip = {
+		.name = "exynosauto_gpio_irq_chip",
+		.irq_unmask = exynos_irq_unmask,
+		.irq_mask = exynos_irq_mask,
+		.irq_ack = exynos_irq_ack,
+		.irq_set_type = exynos_irq_set_type,
+		.irq_request_resources = exynos_irq_request_resources,
+		.irq_release_resources = exynos_irq_release_resources,
+	},
+};
+
 static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq,
 					irq_hw_number_t hw)
 {
@@ -247,7 +271,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
 	unsigned int svc, group, pin;
 	int ret;
 
-	svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
+	if (bank->eint_con_offset)
+		svc = readl(bank->eint_base + EXYNOSAUTO_SVC_OFFSET);
+	else
+		svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
 	group = EXYNOS_SVC_GROUP(svc);
 	pin = svc & EXYNOS_SVC_NUM_MASK;
 
@@ -297,8 +324,12 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
 		if (bank->eint_type != EINT_TYPE_GPIO)
 			continue;
 
-		bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
-					   sizeof(*bank->irq_chip), GFP_KERNEL);
+		if (bank->eint_con_offset)
+			bank->irq_chip = devm_kmemdup(dev, &exynosauto_gpio_irq_chip,
+						      sizeof(*bank->irq_chip), GFP_KERNEL);
+		else
+			bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
+						      sizeof(*bank->irq_chip), GFP_KERNEL);
 		if (!bank->irq_chip) {
 			ret = -ENOMEM;
 			goto err_domains;
@@ -655,6 +686,19 @@ static void exynos_pinctrl_suspend_bank(
 	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
 }
 
+static void exynosauto_pinctrl_suspend_bank(struct samsung_pinctrl_drv_data *drvdata,
+					    struct samsung_pin_bank *bank)
+{
+	struct exynos_eint_gpio_save *save = bank->soc_priv;
+	void __iomem *regs = bank->eint_base;
+
+	save->eint_con = readl(regs + bank->pctl_offset + bank->eint_con_offset);
+	save->eint_mask = readl(regs + bank->pctl_offset + bank->eint_mask_offset);
+
+	pr_debug("%s: save     con %#010x\n", bank->name, save->eint_con);
+	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
+}
+
 void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
 {
 	struct samsung_pin_bank *bank = drvdata->pin_banks;
@@ -662,8 +706,12 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
 	int i;
 
 	for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
-		if (bank->eint_type == EINT_TYPE_GPIO)
-			exynos_pinctrl_suspend_bank(drvdata, bank);
+		if (bank->eint_type == EINT_TYPE_GPIO) {
+			if (bank->eint_con_offset)
+				exynosauto_pinctrl_suspend_bank(drvdata, bank);
+			else
+				exynos_pinctrl_suspend_bank(drvdata, bank);
+		}
 		else if (bank->eint_type == EINT_TYPE_WKUP) {
 			if (!irq_chip) {
 				irq_chip = bank->irq_chip;
@@ -704,14 +752,33 @@ static void exynos_pinctrl_resume_bank(
 						+ bank->eint_offset);
 }
 
+static void exynosauto_pinctrl_resume_bank(struct samsung_pinctrl_drv_data *drvdata,
+					   struct samsung_pin_bank *bank)
+{
+	struct exynos_eint_gpio_save *save = bank->soc_priv;
+	void __iomem *regs = bank->eint_base;
+
+	pr_debug("%s:     con %#010x => %#010x\n", bank->name,
+		 readl(regs + bank->pctl_offset + bank->eint_con_offset), save->eint_con);
+	pr_debug("%s:    mask %#010x => %#010x\n", bank->name,
+		 readl(regs + bank->pctl_offset + bank->eint_mask_offset), save->eint_mask);
+
+	writel(save->eint_con, regs + bank->pctl_offset + bank->eint_con_offset);
+	writel(save->eint_mask, regs + bank->pctl_offset + bank->eint_mask_offset);
+}
+
 void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
 {
 	struct samsung_pin_bank *bank = drvdata->pin_banks;
 	int i;
 
 	for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
-		if (bank->eint_type == EINT_TYPE_GPIO)
-			exynos_pinctrl_resume_bank(drvdata, bank);
+		if (bank->eint_type == EINT_TYPE_GPIO) {
+			if (bank->eint_con_offset)
+				exynosauto_pinctrl_resume_bank(drvdata, bank);
+			else
+				exynos_pinctrl_resume_bank(drvdata, bank);
+		}
 }
 
 static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 3ac52c2cf998..5049c170e958 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -31,6 +31,7 @@
 #define EXYNOS7_WKUP_EMASK_OFFSET	0x900
 #define EXYNOS7_WKUP_EPEND_OFFSET	0xA00
 #define EXYNOS_SVC_OFFSET		0xB08
+#define EXYNOSAUTO_SVC_OFFSET		0xF008
 
 /* helpers to access interrupt service register */
 #define EXYNOS_SVC_GROUP_SHIFT		3
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 79babbb39ced..362e99566919 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1106,6 +1106,9 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
 		bank->eint_type = bdata->eint_type;
 		bank->eint_mask = bdata->eint_mask;
 		bank->eint_offset = bdata->eint_offset;
+		bank->eint_con_offset = bdata->eint_con_offset;
+		bank->eint_mask_offset = bdata->eint_mask_offset;
+		bank->eint_pend_offset = bdata->eint_pend_offset;
 		bank->name = bdata->name;
 
 		raw_spin_lock_init(&bank->slock);
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 9b3db50adef3..789358bcd9c5 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -122,6 +122,9 @@ struct samsung_pin_bank_type {
  * @eint_type: type of the external interrupt supported by the bank.
  * @eint_mask: bit mask of pins which support EINT function.
  * @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @eint_con_offset: ExynosAuto SoC-specific EINT control register offset of bank.
+ * @eint_mask_offset: ExynosAuto SoC-specific EINT mask register offset of bank.
+ * @eint_pend_offset: ExynosAuto SoC-specific EINT pend register offset of bank.
  * @name: name to be prefixed for each pin in this pin bank.
  */
 struct samsung_pin_bank_data {
@@ -133,6 +136,9 @@ struct samsung_pin_bank_data {
 	enum eint_type	eint_type;
 	u32		eint_mask;
 	u32		eint_offset;
+	u32		eint_con_offset;
+	u32		eint_mask_offset;
+	u32		eint_pend_offset;
 	const char	*name;
 };
 
@@ -147,6 +153,9 @@ struct samsung_pin_bank_data {
  * @eint_type: type of the external interrupt supported by the bank.
  * @eint_mask: bit mask of pins which support EINT function.
  * @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @eint_con_offset: ExynosAuto SoC-specific EINT register or interrupt offset of bank.
+ * @eint_mask_offset: ExynosAuto SoC-specific EINT mask register offset of bank.
+ * @eint_pend_offset: ExynosAuto SoC-specific EINT pend register offset of bank.
  * @name: name to be prefixed for each pin in this pin bank.
  * @id: id of the bank, propagated to the pin range.
  * @pin_base: starting pin number of the bank.
@@ -170,6 +179,9 @@ struct samsung_pin_bank {
 	enum eint_type	eint_type;
 	u32		eint_mask;
 	u32		eint_offset;
+	u32		eint_con_offset;
+	u32		eint_mask_offset;
+	u32		eint_pend_offset;
 	const char	*name;
 	u32		id;
 
-- 
2.43.0

Re: [PATCH v3 3/4] pinctrl: samsung: support ExynosAuto GPIO structure

[Krzysztof Kozlowski]

On 08/12/2023 08:45, Jaewon Kim wrote:
> New ExynosAuto series GPIO have a different register structure.
> In the existing Exynos series, EINT control register enumerated after
> a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
> However, from ExynosAutov920 SoC, the register that controls EINT belongs
> to each GPIO bank, and each GPIO bank has 0x1000 align.
> 
> This is a structure to protect the GPIO bank using S2MPU in VM environment,
> and will only be applied in ExynosAuto series SoCs.
> 
> -------------------------------------------------
> | original		| ExynosAutov920	|
> |-----------------------------------------------|
> | 0x0	GPIO_CON	| 0x0	GPIO_CON	|
> | 0x4	GPIO_DAT	| 0x4	GPIO_DAT	|
> | 0x8	GPIO_PUD	| 0x8	GPIO_PUD	|
> | 0xc	GPIO_DRV	| 0xc	GPIO_DRV	|
> | 0x10	GPIO_CONPDN	| 0x10	GPIO_CONPDN	|
> | 0x14	GPIO_PUDPDN	| 0x14	GPIO_PUDPDN	|
> | 0x700	EINT_CON	| 0x18	EINT_CON	|
> | 0x800	EINT_FLTCON	| 0x1c	EINT_FLTCON0	|
> | 0x900	EINT_MASK	| 0x20	EINT_FLTCON1	|
> | 0xa00	EINT_PEND	| 0x24	EINT_MASK	|
> |			| 0x28	EINT_PEND	|
> -------------------------------------------------
> 
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> ---
>  drivers/pinctrl/samsung/pinctrl-exynos.c  | 81 +++++++++++++++++++++--
>  drivers/pinctrl/samsung/pinctrl-exynos.h  |  1 +
>  drivers/pinctrl/samsung/pinctrl-samsung.c |  3 +
>  drivers/pinctrl/samsung/pinctrl-samsung.h | 12 ++++
>  4 files changed, 90 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index 6b58ec84e34b..f798f64b1122 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -56,6 +56,9 @@ static void exynos_irq_mask(struct irq_data *irqd)
>  	unsigned int mask;
>  	unsigned long flags;
>  
> +	if (bank->eint_mask_offset)
> +		reg_mask = bank->pctl_offset + bank->eint_mask_offset;

Drop the initialization of reg_mask so:

else:
reg_mask = ...


> +
>  	raw_spin_lock_irqsave(&bank->slock, flags);
>  
>  	mask = readl(bank->eint_base + reg_mask);
> @@ -72,6 +75,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
>  	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
>  	unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
>  
> +	if (bank->eint_pend_offset)
> +		reg_pend = bank->pctl_offset + bank->eint_pend_offset;
> +
>  	writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
>  }
>  
> @@ -95,6 +101,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
>  	if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
>  		exynos_irq_ack(irqd);
>  

Ditto

> +	if (bank->eint_mask_offset)
> +		reg_mask = bank->pctl_offset + bank->eint_mask_offset;
> +
>  	raw_spin_lock_irqsave(&bank->slock, flags);
>  
>  	mask = readl(bank->eint_base + reg_mask);
> @@ -139,6 +148,9 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
>  	else
>  		irq_set_handler_locked(irqd, handle_level_irq);
>  


Ditto

> +	if (bank->eint_con_offset)
> +		reg_con = bank->pctl_offset + bank->eint_con_offset;
> +
>  	con = readl(bank->eint_base + reg_con);
>  	con &= ~(EXYNOS_EINT_CON_MASK << shift);
>  	con |= trig_type << shift;
> @@ -221,6 +233,18 @@ static const struct exynos_irq_chip exynos_gpio_irq_chip __initconst = {
>  	/* eint_wake_mask_value not used */
>  };
>  
> +static const struct exynos_irq_chip exynosauto_gpio_irq_chip __initconst = {

No related to this patch.

> +	.chip = {
> +		.name = "exynosauto_gpio_irq_chip",
> +		.irq_unmask = exynos_irq_unmask,
> +		.irq_mask = exynos_irq_mask,
> +		.irq_ack = exynos_irq_ack,
> +		.irq_set_type = exynos_irq_set_type,
> +		.irq_request_resources = exynos_irq_request_resources,
> +		.irq_release_resources = exynos_irq_release_resources,
> +	},
> +};
> +
>  static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq,
>  					irq_hw_number_t hw)
>  {
> @@ -247,7 +271,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
>  	unsigned int svc, group, pin;
>  	int ret;
>  
> -	svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
> +	if (bank->eint_con_offset)
> +		svc = readl(bank->eint_base + EXYNOSAUTO_SVC_OFFSET);

This belongs to the second patch. The point of this patch is only to
customize the offsets. There should be nothing autov920 here.


> +	else
> +		svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
>  	group = EXYNOS_SVC_GROUP(svc);
>  	pin = svc & EXYNOS_SVC_NUM_MASK;
>  
> @@ -297,8 +324,12 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
>  		if (bank->eint_type != EINT_TYPE_GPIO)
>  			continue;
>  
> -		bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
> -					   sizeof(*bank->irq_chip), GFP_KERNEL);
> +		if (bank->eint_con_offset)
> +			bank->irq_chip = devm_kmemdup(dev, &exynosauto_gpio_irq_chip,
> +						      sizeof(*bank->irq_chip), GFP_KERNEL);
> +		else
> +			bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
> +						      sizeof(*bank->irq_chip), GFP_KERNEL);
>  		if (!bank->irq_chip) {
>  			ret = -ENOMEM;
>  			goto err_domains;
> @@ -655,6 +686,19 @@ static void exynos_pinctrl_suspend_bank(
>  	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
>  }
>  
> +static void exynosauto_pinctrl_suspend_bank(struct samsung_pinctrl_drv_data *drvdata,
> +					    struct samsung_pin_bank *bank)
> +{
> +	struct exynos_eint_gpio_save *save = bank->soc_priv;
> +	void __iomem *regs = bank->eint_base;
> +
> +	save->eint_con = readl(regs + bank->pctl_offset + bank->eint_con_offset);
> +	save->eint_mask = readl(regs + bank->pctl_offset + bank->eint_mask_offset);
> +
> +	pr_debug("%s: save     con %#010x\n", bank->name, save->eint_con);
> +	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
> +}
> +
>  void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>  {
>  	struct samsung_pin_bank *bank = drvdata->pin_banks;
> @@ -662,8 +706,12 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>  	int i;
>  
>  	for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
> -		if (bank->eint_type == EINT_TYPE_GPIO)
> -			exynos_pinctrl_suspend_bank(drvdata, bank);
> +		if (bank->eint_type == EINT_TYPE_GPIO) {
> +			if (bank->eint_con_offset)
> +				exynosauto_pinctrl_suspend_bank(drvdata, bank);
> +			else
> +				exynos_pinctrl_suspend_bank(drvdata, bank);
> +		}
>  		else if (bank->eint_type == EINT_TYPE_WKUP) {
>  			if (!irq_chip) {
>  				irq_chip = bank->irq_chip;
> @@ -704,14 +752,33 @@ static void exynos_pinctrl_resume_bank(
>  						+ bank->eint_offset);
>  }
>  
> +static void exynosauto_pinctrl_resume_bank(struct samsung_pinctrl_drv_data *drvdata,
> +					   struct samsung_pin_bank *bank)
> +{
> +	struct exynos_eint_gpio_save *save = bank->soc_priv;
> +	void __iomem *regs = bank->eint_base;
> +
> +	pr_debug("%s:     con %#010x => %#010x\n", bank->name,
> +		 readl(regs + bank->pctl_offset + bank->eint_con_offset), save->eint_con);
> +	pr_debug("%s:    mask %#010x => %#010x\n", bank->name,
> +		 readl(regs + bank->pctl_offset + bank->eint_mask_offset), save->eint_mask);
> +
> +	writel(save->eint_con, regs + bank->pctl_offset + bank->eint_con_offset);
> +	writel(save->eint_mask, regs + bank->pctl_offset + bank->eint_mask_offset);
> +}
> +
>  void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
>  {
>  	struct samsung_pin_bank *bank = drvdata->pin_banks;
>  	int i;
>  
>  	for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
> -		if (bank->eint_type == EINT_TYPE_GPIO)
> -			exynos_pinctrl_resume_bank(drvdata, bank);
> +		if (bank->eint_type == EINT_TYPE_GPIO) {
> +			if (bank->eint_con_offset)
> +				exynosauto_pinctrl_resume_bank(drvdata, bank);
> +			else
> +				exynos_pinctrl_resume_bank(drvdata, bank);
> +		}
>  }
>  
>  static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> index 3ac52c2cf998..5049c170e958 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> @@ -31,6 +31,7 @@
>  #define EXYNOS7_WKUP_EMASK_OFFSET	0x900
>  #define EXYNOS7_WKUP_EPEND_OFFSET	0xA00
>  #define EXYNOS_SVC_OFFSET		0xB08
> +#define EXYNOSAUTO_SVC_OFFSET		0xF008

As well not related to this patch.

Best regards,
Krzysztof

Re: [PATCH v3 3/4] pinctrl: samsung: support ExynosAuto GPIO structure

[Jaewon Kim]

Hello Krzysztof,

Thanks to review.


On 23. 12. 10. 22:00, Krzysztof Kozlowski wrote:
> On 08/12/2023 08:45, Jaewon Kim wrote:
>> New ExynosAuto series GPIO have a different register structure.
>> In the existing Exynos series, EINT control register enumerated after
>> a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
>> However, from ExynosAutov920 SoC, the register that controls EINT belongs
>> to each GPIO bank, and each GPIO bank has 0x1000 align.
>>
>> This is a structure to protect the GPIO bank using S2MPU in VM environment,
>> and will only be applied in ExynosAuto series SoCs.
>>
>> -------------------------------------------------
>> | original		| ExynosAutov920	|
>> |-----------------------------------------------|
>> | 0x0	GPIO_CON	| 0x0	GPIO_CON	|
>> | 0x4	GPIO_DAT	| 0x4	GPIO_DAT	|
>> | 0x8	GPIO_PUD	| 0x8	GPIO_PUD	|
>> | 0xc	GPIO_DRV	| 0xc	GPIO_DRV	|
>> | 0x10	GPIO_CONPDN	| 0x10	GPIO_CONPDN	|
>> | 0x14	GPIO_PUDPDN	| 0x14	GPIO_PUDPDN	|
>> | 0x700	EINT_CON	| 0x18	EINT_CON	|
>> | 0x800	EINT_FLTCON	| 0x1c	EINT_FLTCON0	|
>> | 0x900	EINT_MASK	| 0x20	EINT_FLTCON1	|
>> | 0xa00	EINT_PEND	| 0x24	EINT_MASK	|
>> |			| 0x28	EINT_PEND	|
>> -------------------------------------------------
>>
>> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
>> ---
>>   drivers/pinctrl/samsung/pinctrl-exynos.c  | 81 +++++++++++++++++++++--
>>   drivers/pinctrl/samsung/pinctrl-exynos.h  |  1 +
>>   drivers/pinctrl/samsung/pinctrl-samsung.c |  3 +
>>   drivers/pinctrl/samsung/pinctrl-samsung.h | 12 ++++
>>   4 files changed, 90 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
>> index 6b58ec84e34b..f798f64b1122 100644
>> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
>> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
>> @@ -56,6 +56,9 @@ static void exynos_irq_mask(struct irq_data *irqd)
>>   	unsigned int mask;
>>   	unsigned long flags;
>>   
>> +	if (bank->eint_mask_offset)
>> +		reg_mask = bank->pctl_offset + bank->eint_mask_offset;
> Drop the initialization of reg_mask so:
>
> else:
> reg_mask = ...

Okay, I will fix it in v4.


>
>> +
>>   	raw_spin_lock_irqsave(&bank->slock, flags);
>>   
>>   	mask = readl(bank->eint_base + reg_mask);
>> @@ -72,6 +75,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
>>   	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
>>   	unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
>>   
>> +	if (bank->eint_pend_offset)
>> +		reg_pend = bank->pctl_offset + bank->eint_pend_offset;
>> +
>>   	writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
>>   }
>>   
>> @@ -95,6 +101,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
>>   	if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
>>   		exynos_irq_ack(irqd);
>>   
> Ditto
I will fix it also.
>
>> +	if (bank->eint_mask_offset)
>> +		reg_mask = bank->pctl_offset + bank->eint_mask_offset;
>> +
>>   	raw_spin_lock_irqsave(&bank->slock, flags);
>>   
>>   	mask = readl(bank->eint_base + reg_mask);
>> @@ -139,6 +148,9 @@ static int exynos_irq_set_type(struct irq_data *irqd, unsigned int type)
>>   	else
>>   		irq_set_handler_locked(irqd, handle_level_irq);
>>   
>
> Ditto
I will fix it also.
>
>> +	if (bank->eint_con_offset)
>> +		reg_con = bank->pctl_offset + bank->eint_con_offset;
>> +
>>   	con = readl(bank->eint_base + reg_con);
>>   	con &= ~(EXYNOS_EINT_CON_MASK << shift);
>>   	con |= trig_type << shift;
>> @@ -221,6 +233,18 @@ static const struct exynos_irq_chip exynos_gpio_irq_chip __initconst = {
>>   	/* eint_wake_mask_value not used */
>>   };
>>   
>> +static const struct exynos_irq_chip exynosauto_gpio_irq_chip __initconst = {
> No related to this patch.
>
>> +	.chip = {
>> +		.name = "exynosauto_gpio_irq_chip",
>> +		.irq_unmask = exynos_irq_unmask,
>> +		.irq_mask = exynos_irq_mask,
>> +		.irq_ack = exynos_irq_ack,
>> +		.irq_set_type = exynos_irq_set_type,
>> +		.irq_request_resources = exynos_irq_request_resources,
>> +		.irq_release_resources = exynos_irq_release_resources,
>> +	},
>> +};
>> +
>>   static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq,
>>   					irq_hw_number_t hw)
>>   {
>> @@ -247,7 +271,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
>>   	unsigned int svc, group, pin;
>>   	int ret;
>>   
>> -	svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
>> +	if (bank->eint_con_offset)
>> +		svc = readl(bank->eint_base + EXYNOSAUTO_SVC_OFFSET);
> This belongs to the second patch. The point of this patch is only to
> customize the offsets. There should be nothing autov920 here.

Okay, I will put the irq-related changes in the v920 patch.


>
>
>> +	else
>> +		svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
>>   	group = EXYNOS_SVC_GROUP(svc);
>>   	pin = svc & EXYNOS_SVC_NUM_MASK;
>>   
>> @@ -297,8 +324,12 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
>>   		if (bank->eint_type != EINT_TYPE_GPIO)
>>   			continue;
>>   
>> -		bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
>> -					   sizeof(*bank->irq_chip), GFP_KERNEL);
>> +		if (bank->eint_con_offset)
>> +			bank->irq_chip = devm_kmemdup(dev, &exynosauto_gpio_irq_chip,
>> +						      sizeof(*bank->irq_chip), GFP_KERNEL);
>> +		else
>> +			bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
>> +						      sizeof(*bank->irq_chip), GFP_KERNEL);
>>   		if (!bank->irq_chip) {
>>   			ret = -ENOMEM;
>>   			goto err_domains;
>> @@ -655,6 +686,19 @@ static void exynos_pinctrl_suspend_bank(
>>   	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
>>   }
>>   
>> +static void exynosauto_pinctrl_suspend_bank(struct samsung_pinctrl_drv_data *drvdata,
>> +					    struct samsung_pin_bank *bank)
>> +{
>> +	struct exynos_eint_gpio_save *save = bank->soc_priv;
>> +	void __iomem *regs = bank->eint_base;
>> +
>> +	save->eint_con = readl(regs + bank->pctl_offset + bank->eint_con_offset);
>> +	save->eint_mask = readl(regs + bank->pctl_offset + bank->eint_mask_offset);
>> +
>> +	pr_debug("%s: save     con %#010x\n", bank->name, save->eint_con);
>> +	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
>> +}
>> +
>>   void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>>   {
>>   	struct samsung_pin_bank *bank = drvdata->pin_banks;
>> @@ -662,8 +706,12 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
>>   	int i;
>>   
>>   	for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
>> -		if (bank->eint_type == EINT_TYPE_GPIO)
>> -			exynos_pinctrl_suspend_bank(drvdata, bank);
>> +		if (bank->eint_type == EINT_TYPE_GPIO) {
>> +			if (bank->eint_con_offset)
>> +				exynosauto_pinctrl_suspend_bank(drvdata, bank);
>> +			else
>> +				exynos_pinctrl_suspend_bank(drvdata, bank);
>> +		}
>>   		else if (bank->eint_type == EINT_TYPE_WKUP) {
>>   			if (!irq_chip) {
>>   				irq_chip = bank->irq_chip;
>> @@ -704,14 +752,33 @@ static void exynos_pinctrl_resume_bank(
>>   						+ bank->eint_offset);
>>   }
>>   
>> +static void exynosauto_pinctrl_resume_bank(struct samsung_pinctrl_drv_data *drvdata,
>> +					   struct samsung_pin_bank *bank)
>> +{
>> +	struct exynos_eint_gpio_save *save = bank->soc_priv;
>> +	void __iomem *regs = bank->eint_base;
>> +
>> +	pr_debug("%s:     con %#010x => %#010x\n", bank->name,
>> +		 readl(regs + bank->pctl_offset + bank->eint_con_offset), save->eint_con);
>> +	pr_debug("%s:    mask %#010x => %#010x\n", bank->name,
>> +		 readl(regs + bank->pctl_offset + bank->eint_mask_offset), save->eint_mask);
>> +
>> +	writel(save->eint_con, regs + bank->pctl_offset + bank->eint_con_offset);
>> +	writel(save->eint_mask, regs + bank->pctl_offset + bank->eint_mask_offset);
>> +}
>> +
>>   void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
>>   {
>>   	struct samsung_pin_bank *bank = drvdata->pin_banks;
>>   	int i;
>>   
>>   	for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
>> -		if (bank->eint_type == EINT_TYPE_GPIO)
>> -			exynos_pinctrl_resume_bank(drvdata, bank);
>> +		if (bank->eint_type == EINT_TYPE_GPIO) {
>> +			if (bank->eint_con_offset)
>> +				exynosauto_pinctrl_resume_bank(drvdata, bank);
>> +			else
>> +				exynos_pinctrl_resume_bank(drvdata, bank);
>> +		}
>>   }
>>   
>>   static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
>> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
>> index 3ac52c2cf998..5049c170e958 100644
>> --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
>> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
>> @@ -31,6 +31,7 @@
>>   #define EXYNOS7_WKUP_EMASK_OFFSET	0x900
>>   #define EXYNOS7_WKUP_EPEND_OFFSET	0xA00
>>   #define EXYNOS_SVC_OFFSET		0xB08
>> +#define EXYNOSAUTO_SVC_OFFSET		0xF008
> As well not related to this patch.
>
> Best regards,
> Krzysztof
>
>

Thanks

Jaewon Kim

Re: [PATCH v3 3/4] pinctrl: samsung: support ExynosAuto GPIO structure

[Krzysztof Kozlowski]

On 08/12/2023 08:45, Jaewon Kim wrote:
> New ExynosAuto series GPIO have a different register structure.
> In the existing Exynos series, EINT control register enumerated after

Missing verb... or enumerated is past tense? I just don't get entire
sentence.

> a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
> However, from ExynosAutov920 SoC, the register that controls EINT belongs
> to each GPIO bank, and each GPIO bank has 0x1000 align.
> 
> This is a structure to protect the GPIO bank using S2MPU in VM environment,
> and will only be applied in ExynosAuto series SoCs.
> 
> -------------------------------------------------
> | original		| ExynosAutov920	|
> |-----------------------------------------------|
> | 0x0	GPIO_CON	| 0x0	GPIO_CON	|
> | 0x4	GPIO_DAT	| 0x4	GPIO_DAT	|
> | 0x8	GPIO_PUD	| 0x8	GPIO_PUD	|
> | 0xc	GPIO_DRV	| 0xc	GPIO_DRV	|
> | 0x10	GPIO_CONPDN	| 0x10	GPIO_CONPDN	|
> | 0x14	GPIO_PUDPDN	| 0x14	GPIO_PUDPDN	|
> | 0x700	EINT_CON	| 0x18	EINT_CON	|

This suggests there is EINT_CON per bank in old and new register layout.
I don't think it's true, so probably this could look like:

| ---                           | 0x18	EINT_CON (per_bank) |
| ---                           | 0x18	EINT_FLTCON0 (per_bank) |
| ---                           | 0x18	EINT_FLTCON1 (per_bank) |
| ---                           | 0x18	EINT_MASK (per_bank) |
| 0x700	EINT_CON (global)       | 0x18	EINT_CON	|

etc..

Also, please use spaces for alignment in the table.



Best regards,
Krzysztof

Re: [PATCH v3 3/4] pinctrl: samsung: support ExynosAuto GPIO structure

[Jaewon Kim]

On 23. 12. 10. 22:23, Krzysztof Kozlowski wrote:
> On 08/12/2023 08:45, Jaewon Kim wrote:
>> New ExynosAuto series GPIO have a different register structure.
>> In the existing Exynos series, EINT control register enumerated after
> Missing verb... or enumerated is past tense? I just don't get entire
> sentence.

Sorry, I will add 'is' like below.

In the existing Exynos series, the EINT control register is enumerated 
after a specific offset.


>
>> a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET, EXYNOS_GPIO_EMASK_OFFSET).
>> However, from ExynosAutov920 SoC, the register that controls EINT belongs
>> to each GPIO bank, and each GPIO bank has 0x1000 align.
>>
>> This is a structure to protect the GPIO bank using S2MPU in VM environment,
>> and will only be applied in ExynosAuto series SoCs.
>>
>> -------------------------------------------------
>> | original		| ExynosAutov920	|
>> |-----------------------------------------------|
>> | 0x0	GPIO_CON	| 0x0	GPIO_CON	|
>> | 0x4	GPIO_DAT	| 0x4	GPIO_DAT	|
>> | 0x8	GPIO_PUD	| 0x8	GPIO_PUD	|
>> | 0xc	GPIO_DRV	| 0xc	GPIO_DRV	|
>> | 0x10	GPIO_CONPDN	| 0x10	GPIO_CONPDN	|
>> | 0x14	GPIO_PUDPDN	| 0x14	GPIO_PUDPDN	|
>> | 0x700	EINT_CON	| 0x18	EINT_CON	|
> This suggests there is EINT_CON per bank in old and new register layout.
> I don't think it's true, so probably this could look like:
>
> | ---                           | 0x18	EINT_CON (per_bank) |
> | ---                           | 0x18	EINT_FLTCON0 (per_bank) |
> | ---                           | 0x18	EINT_FLTCON1 (per_bank) |
> | ---                           | 0x18	EINT_MASK (per_bank) |
> | 0x700	EINT_CON (global)       | 0x18	EINT_CON	|
>
> etc..
>
> Also, please use spaces for alignment in the table.
>
Thanks you for your review.

I will add (global), (per_bank) for clearer expression.

And, I will use space instead of tab in v4.

>
> Best regards,
> Krzysztof
>
>

[PATCH v3 4/4] pinctrl: samsung: add exynosautov920 pinctrl

[Jaewon Kim]

Add pinctrl data for ExynosAutov920 SoC.

Pinctrl data for ExynosAutoV920 SoC.
 - GPA0,GPA1 (10): External wake up interrupt
 - GPQ0 (2): SPMI (PMIC I/F)
 - GPB0,GPB1,GPB2,GPB3,GPB4,GPB5,GPB6 (47): I2S Audio
 - GPH0,GPH1,GPH2,GPH3,GPH4,GPH5,GPH6,GPH8 (49): PCIE, UFS, Ethernet
 - GPG0,GPG1,GPG2,GPG3,GPG4,GPG5 (29): General purpose
 - GPP0,GPP1,GPP2,GPP3,GPP4,GPP5,GPP6,GPP7,GPP8,GPP9,GPP10 (77): USI

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
---
 .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 140 ++++++++++++++++++
 drivers/pinctrl/samsung/pinctrl-exynos.c      |  18 +++
 drivers/pinctrl/samsung/pinctrl-exynos.h      |  24 +++
 drivers/pinctrl/samsung/pinctrl-samsung.c     |   2 +
 drivers/pinctrl/samsung/pinctrl-samsung.h     |   1 +
 5 files changed, 185 insertions(+)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index cb965cf93705..a998c296dd05 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -796,3 +796,143 @@ const struct samsung_pinctrl_of_match_data fsd_of_data __initconst = {
 	.ctrl		= fsd_pin_ctrl,
 	.num_ctrl	= ARRAY_SIZE(fsd_pin_ctrl),
 };
+
+/* pin banks of exynosautov920 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks0[] = {
+	EXYNOSV920_PIN_BANK_EINTW(8, 0x0000, "gpa0", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTW(2, 0x1000, "gpa1", 0x18, 0x20, 0x24),
+	EXYNOS850_PIN_BANK_EINTN(2, 0x2000, "gpq0"),
+};
+
+/* pin banks of exynosautov920 pin-controller 1 (AUD) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks1[] = {
+	EXYNOSV920_PIN_BANK_EINTG(7, 0x0000, "gpb0", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(6, 0x1000, "gpb1", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x2000, "gpb2", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x3000, "gpb3", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x4000, "gpb4", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(5, 0x5000, "gpb5", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(5, 0x6000, "gpb6", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 2 (HSI0) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks2[] = {
+	EXYNOSV920_PIN_BANK_EINTG(6, 0x0000, "gph0", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(2, 0x1000, "gph1", 0x18, 0x20, 0x24),
+};
+
+/* pin banks of exynosautov920 pin-controller 3 (HSI1) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks3[] = {
+	EXYNOSV920_PIN_BANK_EINTG(7, 0x000, "gph8", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 4 (HSI2) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks4[] = {
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x0000, "gph3", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(7, 0x1000, "gph4", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x2000, "gph5", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(7, 0x3000, "gph6", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 5 (HSI2UFS) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks5[] = {
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x000, "gph2", 0x18, 0x20, 0x24),
+};
+
+/* pin banks of exynosautov920 pin-controller 6 (PERIC0) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks6[] = {
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x0000, "gpp0", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x1000, "gpp1", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x2000, "gpp2", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(5, 0x3000, "gpg0", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x4000, "gpp3", 0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x5000, "gpp4", 0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x6000, "gpg2", 0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x7000, "gpg5", 0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(3, 0x8000, "gpg3", 0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(5, 0x9000, "gpg4", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 7 (PERIC1) */
+static const struct samsung_pin_bank_data exynosautov920_pin_banks7[] = {
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x0000, "gpp5",  0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(5, 0x1000, "gpp6",  0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x2000, "gpp10", 0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x3000, "gpp7",  0x18, 0x24, 0x28),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x4000, "gpp8",  0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x5000, "gpp11", 0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x6000, "gpp9",  0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(4, 0x7000, "gpp12", 0x18, 0x20, 0x24),
+	EXYNOSV920_PIN_BANK_EINTG(8, 0x8000, "gpg1",  0x18, 0x24, 0x28),
+};
+
+static const struct samsung_retention_data exynosautov920_retention_data __initconst = {
+	.regs	 = NULL,
+	.nr_regs = 0,
+	.value	 = 0,
+	.refcnt	 = &exynos_shared_retention_refcnt,
+	.init	 = exynos_retention_init,
+};
+
+static const struct samsung_pin_ctrl exynosautov920_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 ALIVE data */
+		.pin_banks	= exynosautov920_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks0),
+		.eint_wkup_init	= exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynosautov920_retention_data,
+	}, {
+		/* pin-controller instance 1 AUD data */
+		.pin_banks	= exynosautov920_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks1),
+	}, {
+		/* pin-controller instance 2 HSI0 data */
+		.pin_banks	= exynosautov920_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks2),
+		.eint_gpio_init	= exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 3 HSI1 data */
+		.pin_banks	= exynosautov920_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks3),
+		.eint_gpio_init	= exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 4 HSI2 data */
+		.pin_banks	= exynosautov920_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks4),
+		.eint_gpio_init	= exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 5 HSI2UFS data */
+		.pin_banks	= exynosautov920_pin_banks5,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks5),
+		.eint_gpio_init	= exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 6 PERIC0 data */
+		.pin_banks	= exynosautov920_pin_banks6,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks6),
+		.eint_gpio_init	= exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 7 PERIC1 data */
+		.pin_banks	= exynosautov920_pin_banks7,
+		.nr_banks	= ARRAY_SIZE(exynosautov920_pin_banks7),
+		.eint_gpio_init	= exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynosautov920_of_data __initconst = {
+	.ctrl		= exynosautov920_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynosautov920_pin_ctrl),
+};
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index f798f64b1122..593633d09aa2 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -487,6 +487,22 @@ static const struct exynos_irq_chip exynos7_wkup_irq_chip __initconst = {
 	.set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
 };
 
+static const struct exynos_irq_chip exynosautov920_wkup_irq_chip __initconst = {
+	.chip = {
+		.name = "exynosautov920_wkup_irq_chip",
+		.irq_unmask = exynos_irq_unmask,
+		.irq_mask = exynos_irq_mask,
+		.irq_ack = exynos_irq_ack,
+		.irq_set_type = exynos_irq_set_type,
+		.irq_set_wake = exynos_wkup_irq_set_wake,
+		.irq_request_resources = exynos_irq_request_resources,
+		.irq_release_resources = exynos_irq_release_resources,
+	},
+	.eint_wake_mask_value = &eint_wake_mask_value,
+	.eint_wake_mask_reg = EXYNOS5433_EINT_WAKEUP_MASK,
+	.set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
+};
+
 /* list of external wakeup controllers supported */
 static const struct of_device_id exynos_wkup_irq_ids[] = {
 	{ .compatible = "samsung,s5pv210-wakeup-eint",
@@ -499,6 +515,8 @@ static const struct of_device_id exynos_wkup_irq_ids[] = {
 			.data = &exynos7_wkup_irq_chip },
 	{ .compatible = "samsung,exynosautov9-wakeup-eint",
 			.data = &exynos7_wkup_irq_chip },
+	{ .compatible = "samsung,exynosautov920-wakeup-eint",
+			.data = &exynosautov920_wkup_irq_chip },
 	{ }
 };
 
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 5049c170e958..305cb1d31de4 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -141,6 +141,30 @@
 		.name		= id				\
 	}
 
+#define EXYNOSV920_PIN_BANK_EINTG(pins, reg, id, con_offs, mask_offs, pend_offs)	\
+	{							\
+		.type			= &exynos850_bank_type_off,	\
+		.pctl_offset		= reg,				\
+		.nr_pins		= pins,				\
+		.eint_type		= EINT_TYPE_GPIO,		\
+		.eint_con_offset	= con_offs,			\
+		.eint_mask_offset	= mask_offs,			\
+		.eint_pend_offset	= pend_offs,			\
+		.name			= id				\
+	}
+
+#define EXYNOSV920_PIN_BANK_EINTW(pins, reg, id, con_offs, mask_offs, pend_offs)	\
+	{							\
+		.type			= &exynos850_bank_type_alive,	\
+		.pctl_offset		= reg,				\
+		.nr_pins		= pins,				\
+		.eint_type		= EINT_TYPE_WKUP,		\
+		.eint_con_offset	= con_offs,			\
+		.eint_mask_offset	= mask_offs,			\
+		.eint_pend_offset	= pend_offs,			\
+		.name			= id				\
+	}
+
 /**
  * struct exynos_weint_data: irq specific data for all the wakeup interrupts
  * generated by the external wakeup interrupt controller.
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 362e99566919..800a2f0a026a 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1324,6 +1324,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = &exynosautov9_of_data },
 	{ .compatible = "tesla,fsd-pinctrl",
 		.data = &fsd_of_data },
+	{ .compatible = "samsung,exynosautov920-pinctrl",
+		.data = &exynosautov920_of_data },
 #endif
 #ifdef CONFIG_PINCTRL_S3C64XX
 	{ .compatible = "samsung,s3c64xx-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 789358bcd9c5..987086fa0d1d 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -362,6 +362,7 @@ extern const struct samsung_pinctrl_of_match_data exynos7_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos7885_of_data;
 extern const struct samsung_pinctrl_of_match_data exynos850_of_data;
 extern const struct samsung_pinctrl_of_match_data exynosautov9_of_data;
+extern const struct samsung_pinctrl_of_match_data exynosautov920_of_data;
 extern const struct samsung_pinctrl_of_match_data fsd_of_data;
 extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data;
 extern const struct samsung_pinctrl_of_match_data s3c2412_of_data;
-- 
2.43.0

Re: [PATCH v3 4/4] pinctrl: samsung: add exynosautov920 pinctrl

[Krzysztof Kozlowski]

On 08/12/2023 08:45, Jaewon Kim wrote:
> Add pinctrl data for ExynosAutov920 SoC.
> 
> Pinctrl data for ExynosAutoV920 SoC.
>  - GPA0,GPA1 (10): External wake up interrupt
>  - GPQ0 (2): SPMI (PMIC I/F)
>  - GPB0,GPB1,GPB2,GPB3,GPB4,GPB5,GPB6 (47): I2S Audio
>  - GPH0,GPH1,GPH2,GPH3,GPH4,GPH5,GPH6,GPH8 (49): PCIE, UFS, Ethernet
>  - GPG0,GPG1,GPG2,GPG3,GPG4,GPG5 (29): General purpose
>  - GPP0,GPP1,GPP2,GPP3,GPP4,GPP5,GPP6,GPP7,GPP8,GPP9,GPP10 (77): USI
> 
> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> ---

...


>  /**
>   * struct exynos_weint_data: irq specific data for all the wakeup interrupts
>   * generated by the external wakeup interrupt controller.
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index 362e99566919..800a2f0a026a 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -1324,6 +1324,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
>  		.data = &exynosautov9_of_data },
>  	{ .compatible = "tesla,fsd-pinctrl",
>  		.data = &fsd_of_data },
> +	{ .compatible = "samsung,exynosautov920-pinctrl",
> +		.data = &exynosautov920_of_data },

Please put it after autov9.

Best regards,
Krzysztof

Re: [PATCH v3 4/4] pinctrl: samsung: add exynosautov920 pinctrl

[Jaewon Kim]

Hello Krzysztof,

Thanks for your review.


On 23. 12. 10. 22:23, Krzysztof Kozlowski wrote:
> On 08/12/2023 08:45, Jaewon Kim wrote:
>> Add pinctrl data for ExynosAutov920 SoC.
>>
>> Pinctrl data for ExynosAutoV920 SoC.
>>   - GPA0,GPA1 (10): External wake up interrupt
>>   - GPQ0 (2): SPMI (PMIC I/F)
>>   - GPB0,GPB1,GPB2,GPB3,GPB4,GPB5,GPB6 (47): I2S Audio
>>   - GPH0,GPH1,GPH2,GPH3,GPH4,GPH5,GPH6,GPH8 (49): PCIE, UFS, Ethernet
>>   - GPG0,GPG1,GPG2,GPG3,GPG4,GPG5 (29): General purpose
>>   - GPP0,GPP1,GPP2,GPP3,GPP4,GPP5,GPP6,GPP7,GPP8,GPP9,GPP10 (77): USI
>>
>> Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
>> ---
> ...
>
>
>>   /**
>>    * struct exynos_weint_data: irq specific data for all the wakeup interrupts
>>    * generated by the external wakeup interrupt controller.
>> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> index 362e99566919..800a2f0a026a 100644
>> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
>> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> @@ -1324,6 +1324,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
>>   		.data = &exynosautov9_of_data },
>>   	{ .compatible = "tesla,fsd-pinctrl",
>>   		.data = &fsd_of_data },
>> +	{ .compatible = "samsung,exynosautov920-pinctrl",
>> +		.data = &exynosautov920_of_data },
> Please put it after autov9.

Okay, I will change the order.

>
> Best regards,
> Krzysztof
>
>
>

Thanks

Jaewon Kim