[PATCH v2] ASoC: sdw_utils: cs42l43: Enable Headphone pin for LINEOUT jack type

[Cole Leavitt <cole@unwrap.rs>]

The CS42L43 codec's load detection can return different impedance values
that map to either HEADPHONE or LINEOUT jack types. However, the
soc_jack_pins array only maps SND_JACK_HEADPHONE to the "Headphone" DAPM
pin, not SND_JACK_LINEOUT.

When headphones are detected with an impedance that maps to LINEOUT
(such as impedance value 0x2), the driver reports SND_JACK_LINEOUT.
Since this doesn't match the jack pin mask, the "Headphone" DAPM pin
is not activated, and no audio is routed to the headphone outputs.

Fix by adding SND_JACK_LINEOUT to the Headphone pin mask, so that both
headphone and line-out detection properly enable the headphone output
path.

This fixes no audio output on devices like the Lenovo ThinkPad P16 Gen 3
where headphones are detected with LINEOUT impedance.

Fixes: d74bad3b7452 ("ASoC: intel: sof_sdw_cs42l43: Create separate jacks for hp and mic")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
---
Changes in v2:
- Fixed Fixes tag to reference correct commit d74bad3b7452
- Added Reviewed-by from Charles Keepax
---
 sound/soc/sdw_utils/soc_sdw_cs42l43.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sdw_utils/soc_sdw_cs42l43.c b/sound/soc/sdw_utils/soc_sdw_cs42l43.c
index 4c954501e500..2685ff4f0932 100644
--- a/sound/soc/sdw_utils/soc_sdw_cs42l43.c
+++ b/sound/soc/sdw_utils/soc_sdw_cs42l43.c
@@ -44,7 +44,7 @@ static const struct snd_soc_dapm_route cs42l43_dmic_map[] = {
 static struct snd_soc_jack_pin soc_jack_pins[] = {
 	{
 		.pin    = "Headphone",
-		.mask   = SND_JACK_HEADPHONE,
+		.mask   = SND_JACK_HEADPHONE | SND_JACK_LINEOUT,
 	},
 	{
 		.pin    = "Headset Mic",
-- 
2.52.0