Linux Sound subsystem development
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: lee@kernel.org, Srinivas Kandagatla <srini@kernel.org>,
	Vinod Koul <vkoul@kernel.org>,
	Bard Liao <yung-chuan.liao@linux.intel.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>,
	linux-sound@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: [PATCH 11/21] soundwire: qcom: Prevent stale broadcast IRQ from completing subsequent command
Date: Fri, 30 Oct 2026 10:46:50 +0000	[thread overview]
Message-ID: <20261030104840.3361217-12-lee@kernel.org> (raw)
In-Reply-To: <20261030104840.3361217-1-lee@kernel.org>

When wait_for_completion_timeout() expires for a broadcast command in
qcom_swrm_cmd_fifo_wr_cmd(), any late
SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED interrupt from the
timed-out command can fire concurrently with a subsequent broadcast
command after reinit_completion(&ctrl->broadcast), prematurely
completing the new command.

Clear any pending special command completion interrupt and reinitialise
ctrl->broadcast before issuing a broadcast command under
ctrl->intr_lock, clear the interrupt on timeout, and verify that the
interrupt status bit is still asserted under ctrl->intr_lock before
signalling ctrl->broadcast.

Fixes: ddea6cf7b619 ("soundwire: qcom: update register read/write routine")
Closes: https://sashiko.dev/#/bug/linux-fa1aa3a1-f9c7-4e8a-bdfc-49a559353546
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---
 drivers/soundwire/qcom.c | 44 +++++++++++++++++++++++++++++++++-------
 1 file changed, 37 insertions(+), 7 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index cfa3466ff8e1..5432d3795cea 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -554,11 +554,18 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data,
 	if (swrm_wait_for_wr_fifo_avail(ctrl))
 		return SDW_CMD_FAIL_OTHER;
 
-	if (cmd_id == SWR_BROADCAST_CMD_ID)
+	if (cmd_id == SWR_BROADCAST_CMD_ID) {
+		mutex_lock(&ctrl->intr_lock);
+		ctrl->reg_write(ctrl,
+				ctrl->reg_layout[SWRM_REG_INTERRUPT_CLEAR],
+				SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED);
 		reinit_completion(&ctrl->broadcast);
-
-	/* Its assumed that write is okay as we do not get any status back */
-	ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_WR_CMD], val);
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_WR_CMD], val);
+		mutex_unlock(&ctrl->intr_lock);
+	} else {
+		/* Its assumed that write is okay as we do not get any status back */
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_WR_CMD], val);
+	}
 
 	if (ctrl->version <= SWRM_VERSION_1_3_0)
 		usleep_range(150, 155);
@@ -571,10 +578,16 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data,
 		 */
 		ret = wait_for_completion_timeout(&ctrl->broadcast,
 						  msecs_to_jiffies(TIMEOUT_MS));
-		if (!ret)
+		if (!ret) {
+			mutex_lock(&ctrl->intr_lock);
+			ctrl->reg_write(ctrl,
+					ctrl->reg_layout[SWRM_REG_INTERRUPT_CLEAR],
+					SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED);
+			mutex_unlock(&ctrl->intr_lock);
 			ret = SDW_CMD_IGNORED;
-		else
+		} else {
 			ret = SDW_CMD_OK;
+		}
 
 	} else {
 		ret = SDW_CMD_OK;
@@ -773,6 +786,22 @@ static irqreturn_t qcom_swrm_wake_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static void qcom_swrm_complete_broadcast(struct qcom_swrm_ctrl *ctrl)
+{
+	u32 status;
+
+	guard(mutex)(&ctrl->intr_lock);
+
+	ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_STATUS],
+		       &status);
+	if (status & SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED) {
+		ctrl->reg_write(ctrl,
+				ctrl->reg_layout[SWRM_REG_INTERRUPT_CLEAR],
+				SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED);
+		complete(&ctrl->broadcast);
+	}
+}
+
 static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 {
 	struct qcom_swrm_ctrl *ctrl = dev_id;
@@ -889,7 +918,8 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
 				mutex_unlock(&ctrl->intr_lock);
 				break;
 			case SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED:
-				complete(&ctrl->broadcast);
+				qcom_swrm_complete_broadcast(ctrl);
+				intr_sts &= ~SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED;
 				break;
 			case SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2:
 				break;
-- 
2.56.0.317.g454f8302e1-goog


  parent reply	other threads:[~2026-10-30 10:51 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-30 10:46 [PATCH 00/21] soundwire: Fix Critical and High issues reported by Sashiko Lee Jones
2026-10-30 10:46 ` [PATCH 01/21] soundwire: bus: Hold bus_lock when looking up slave devices Lee Jones
2026-10-30 10:46 ` [PATCH 02/21] soundwire: sysfs: Use sysfs_emit_at() in array show callbacks Lee Jones
2026-10-30 10:46 ` [PATCH 03/21] soundwire: stream: Prevent m_rt_count underflow in sdw_stream_remove_master() Lee Jones
2026-10-30 11:09   ` sashiko-bot
2026-10-30 10:46 ` [PATCH 04/21] soundwire: stream: Clean up allocated runtime resources on config failure Lee Jones
2026-10-30 10:46 ` [PATCH 05/21] ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams Lee Jones
2026-10-30 11:14   ` Mark Brown
2026-10-30 11:38     ` Vinod Koul
2026-10-30 12:03       ` Lee Jones
2026-10-30 12:25   ` Péter Ujfalusi
2026-10-30 13:09   ` Liao, Bard
2026-10-30 10:46 ` [PATCH 06/21] soundwire: intel_ace2x: Protect bus.bpt_stream with bus_lock Lee Jones
2026-10-30 11:26   ` sashiko-bot
2026-10-30 10:46 ` [PATCH 07/21] soundwire: qcom: Prevent pconfig buffer overflow in qcom_swrm_stream_alloc_ports() Lee Jones
2026-10-30 11:43   ` sashiko-bot
2026-10-30 10:46 ` [PATCH 08/21] soundwire: qcom: Disable runtime PM and avoid clock underflow in qcom_swrm_remove() Lee Jones
2026-10-30 10:46 ` [PATCH 09/21] soundwire: qcom: Check clk_prepare_enable() return value Lee Jones
2026-10-30 10:46 ` [PATCH 10/21] soundwire: qcom: Serialise ctrl->intr_mask updates Lee Jones
2026-10-30 10:46 ` Lee Jones [this message]
2026-10-30 10:46 ` [PATCH 12/21] soundwire: amd: Check for NULL manager drvdata in sdw_amd_startup() Lee Jones
2026-10-30 13:04   ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 13/21] soundwire: amd: Check ping command response for timeout Lee Jones
2026-10-30 11:37   ` Mukunda,Vijendar
2026-10-30 12:04     ` Lee Jones
2026-10-30 12:15   ` sashiko-bot
2026-10-30 10:46 ` [PATCH 14/21] soundwire: amd: Preserve lane control bits in amd_sdw_port_enable() Lee Jones
2026-10-30 11:45   ` Mukunda,Vijendar
2026-10-30 11:52     ` Lee Jones
2026-10-30 10:46 ` [PATCH 15/21] soundwire: amd: Avoid static port offset leak in amd_sdw_compute_params() Lee Jones
2026-10-30 11:57   ` Mukunda,Vijendar
2026-10-30 12:04     ` Lee Jones
2026-10-30 10:46 ` [PATCH 16/21] soundwire: amd: Initialise and cancel IRQ work around manager lifetime Lee Jones
2026-10-30 12:13   ` Mukunda,Vijendar
2026-10-30 12:17     ` Lee Jones
2026-10-30 12:48     ` Mario Limonciello
2026-10-30 10:46 ` [PATCH 17/21] soundwire: amd: Resume manager before hardware teardown in amd_sdw_manager_remove() Lee Jones
2026-10-30 12:21   ` Mukunda,Vijendar
2026-10-30 12:21   ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 18/21] soundwire: amd: Synchronise parent IRQ and disable work on manager removal Lee Jones
2026-10-30 12:28   ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 19/21] soundwire: amd: Cancel pending work before suspending manager Lee Jones
2026-10-30 12:34   ` Mukunda,Vijendar
2026-10-30 13:16   ` sashiko-bot
2026-10-30 10:46 ` [PATCH 20/21] soundwire: amd: Check clock resume timeout in amd_resume_runtime() Lee Jones
2026-10-30 12:51   ` Mukunda,Vijendar
2026-10-30 12:55     ` Mukunda,Vijendar
2026-10-30 10:47 ` [PATCH 21/21] soundwire: amd: Disable interrupts if enabling manager fails Lee Jones
2026-10-30 12:58   ` Mukunda,Vijendar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261030104840.3361217-12-lee@kernel.org \
    --to=lee@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=pierre-louis.bossart@linux.dev \
    --cc=srini@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=vkoul@kernel.org \
    --cc=yung-chuan.liao@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox