From: "Péter Ujfalusi" <peter.ujfalusi@linux.intel.com>
To: Lee Jones <lee@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
Kai Vehmanen <kai.vehmanen@linux.intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>,
Vijendar Mukunda <Vijendar.Mukunda@amd.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>, Vinod Koul <vkoul@kernel.org>,
Ranjani Sridharan <ranjani.sridharan@linux.intel.com>,
sound-open-firmware@alsa-project.org,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: Re: [PATCH 05/21] ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams
Date: Fri, 30 Oct 2026 14:25:04 +0200 [thread overview]
Message-ID: <b8d821ee-9208-4429-a459-6270b31db191@linux.intel.com> (raw)
In-Reply-To: <20261030104840.3361217-6-lee@kernel.org>
On 30/10/2026 12:46, Lee Jones wrote:
> When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after
> hda_sdw_bpt_send_async() has already started the TX and RX DMA streams,
> intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly
> without calling hda_sdw_bpt_wait(). As a result,
> hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while
> the DMA hardware is still running.
>
> Disable any running TX or RX BPT DMA stream at the start of
> hda_sdw_bpt_close() before unmapping channels and depreparing DMA
> resources.
>
> Fixes: 4c1ce9f37d8a ("soundwire: intel_ace2x: add BPT send_async/wait callbacks")
> Closes: https://sashiko.dev/#/bug/linux-ff0012de-abdd-4796-875e-b1fbbf47235f
> Cc: stable@vger.kernel.org
> Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
> ---
> sound/soc/sof/intel/hda-sdw-bpt.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/sound/soc/sof/intel/hda-sdw-bpt.c b/sound/soc/sof/intel/hda-sdw-bpt.c
> index ba9fbd662b85..9d97d8676251 100644
> --- a/sound/soc/sof/intel/hda-sdw-bpt.c
> +++ b/sound/soc/sof/intel/hda-sdw-bpt.c
> @@ -456,6 +456,12 @@ int hda_sdw_bpt_close(struct device *dev, int link_id, struct hdac_ext_stream *b
> int ret;
> int ret1;
>
> + if (bpt_rx_stream && hdac_stream(bpt_rx_stream)->running)
> + hda_sdw_bpt_dma_disable(dev, bpt_rx_stream);
> +
> + if (bpt_tx_stream && hdac_stream(bpt_tx_stream)->running)
> + hda_sdw_bpt_dma_disable(dev, bpt_tx_stream);
> +
> /*
> * In the case of SoundWire we need to reset the PCMSyCM registers.
> * Need to continue depreparing the DMA buffers even if this fails.
--
Péter
next prev parent reply other threads:[~2026-10-30 12:24 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 10:46 [PATCH 00/21] soundwire: Fix Critical and High issues reported by Sashiko Lee Jones
2026-10-30 10:46 ` [PATCH 01/21] soundwire: bus: Hold bus_lock when looking up slave devices Lee Jones
2026-10-30 10:46 ` [PATCH 02/21] soundwire: sysfs: Use sysfs_emit_at() in array show callbacks Lee Jones
2026-10-30 10:46 ` [PATCH 03/21] soundwire: stream: Prevent m_rt_count underflow in sdw_stream_remove_master() Lee Jones
2026-10-30 11:09 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 04/21] soundwire: stream: Clean up allocated runtime resources on config failure Lee Jones
2026-10-30 10:46 ` [PATCH 05/21] ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams Lee Jones
2026-10-30 11:14 ` Mark Brown
2026-10-30 11:38 ` Vinod Koul
2026-10-30 12:03 ` Lee Jones
2026-10-30 12:25 ` Péter Ujfalusi [this message]
2026-10-30 13:09 ` Liao, Bard
2026-10-30 10:46 ` [PATCH 06/21] soundwire: intel_ace2x: Protect bus.bpt_stream with bus_lock Lee Jones
2026-10-30 11:26 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 07/21] soundwire: qcom: Prevent pconfig buffer overflow in qcom_swrm_stream_alloc_ports() Lee Jones
2026-10-30 11:43 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 08/21] soundwire: qcom: Disable runtime PM and avoid clock underflow in qcom_swrm_remove() Lee Jones
2026-10-30 10:46 ` [PATCH 09/21] soundwire: qcom: Check clk_prepare_enable() return value Lee Jones
2026-10-30 10:46 ` [PATCH 10/21] soundwire: qcom: Serialise ctrl->intr_mask updates Lee Jones
2026-10-30 10:46 ` [PATCH 11/21] soundwire: qcom: Prevent stale broadcast IRQ from completing subsequent command Lee Jones
2026-10-30 10:46 ` [PATCH 12/21] soundwire: amd: Check for NULL manager drvdata in sdw_amd_startup() Lee Jones
2026-10-30 13:04 ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 13/21] soundwire: amd: Check ping command response for timeout Lee Jones
2026-10-30 11:37 ` Mukunda,Vijendar
2026-10-30 12:04 ` Lee Jones
2026-10-30 12:15 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 14/21] soundwire: amd: Preserve lane control bits in amd_sdw_port_enable() Lee Jones
2026-10-30 11:45 ` Mukunda,Vijendar
2026-10-30 11:52 ` Lee Jones
2026-10-30 10:46 ` [PATCH 15/21] soundwire: amd: Avoid static port offset leak in amd_sdw_compute_params() Lee Jones
2026-10-30 11:57 ` Mukunda,Vijendar
2026-10-30 12:04 ` Lee Jones
2026-10-30 10:46 ` [PATCH 16/21] soundwire: amd: Initialise and cancel IRQ work around manager lifetime Lee Jones
2026-10-30 12:13 ` Mukunda,Vijendar
2026-10-30 12:17 ` Lee Jones
2026-10-30 12:48 ` Mario Limonciello
2026-10-30 10:46 ` [PATCH 17/21] soundwire: amd: Resume manager before hardware teardown in amd_sdw_manager_remove() Lee Jones
2026-10-30 12:21 ` Mukunda,Vijendar
2026-10-30 12:21 ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 18/21] soundwire: amd: Synchronise parent IRQ and disable work on manager removal Lee Jones
2026-10-30 12:28 ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 19/21] soundwire: amd: Cancel pending work before suspending manager Lee Jones
2026-10-30 12:34 ` Mukunda,Vijendar
2026-10-30 13:16 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 20/21] soundwire: amd: Check clock resume timeout in amd_resume_runtime() Lee Jones
2026-10-30 12:51 ` Mukunda,Vijendar
2026-10-30 12:55 ` Mukunda,Vijendar
2026-10-30 10:47 ` [PATCH 21/21] soundwire: amd: Disable interrupts if enabling manager fails Lee Jones
2026-10-30 12:58 ` Mukunda,Vijendar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b8d821ee-9208-4429-a459-6270b31db191@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=broonie@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.dev \
--cc=ranjani.sridharan@linux.intel.com \
--cc=sound-open-firmware@alsa-project.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=vkoul@kernel.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox