From: "Mukunda,Vijendar" <vijendar.mukunda@amd.com>
To: Lee Jones <lee@kernel.org>, Vinod Koul <vkoul@kernel.org>,
Bard Liao <yung-chuan.liao@linux.intel.com>,
Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>,
Mastan Katragadda <Mastan.Katragadda@amd.com>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: Re: [PATCH 19/21] soundwire: amd: Cancel pending work before suspending manager
Date: Fri, 30 Oct 2026 18:04:44 +0530 [thread overview]
Message-ID: <8dcda015-b591-43d0-96d5-1faec73294ee@amd.com> (raw)
In-Reply-To: <20261030104840.3361217-20-lee@kernel.org>
On 10/30/26 16:16, Lee Jones wrote:
> amd_suspend_runtime() stops the SoundWire bus clock and transitions the
> controller into D3 without cancelling amd_sdw_irq_thread and
> amd_sdw_work, and amd_suspend() only cancels amd_sdw_work without first
> cancelling amd_sdw_irq_thread. Queued work executing concurrently with
> suspend can access MMIO registers after the controller is clock-stopped
> or powered down.
>
> Mask manager interrupts, synchronise the parent PCI IRQ, and cancel both
> amd_sdw_irq_thread and amd_sdw_work before stopping the bus clock and in
> amd_deinit_sdw_manager(), unmask wake interrupts only after clock stop
> completes, and avoid non-wake register accesses in amd_sdw_irq_thread()
> while the clock is stopped.
Both issues are already addressed in our v3 patch series:
https://lore.kernel.org/alsa-devel/20261013085111.2009061-6-Vijendar.Mukunda@amd.com/T/#m7741edcedb1264764edc7f8559e39af8b23433fb
In our v3 implementation, both the suspend and suspend_runtime paths
call acp_disable_sdw_interrupts() followed by cancel_work_sync() for
both amd_sdw_irq_thread and amd_sdw_work, in that order, before
clock stop — for both CLK_STOP_MODE and POWER_OFF_MODE.
Additionally, the amd_sdw_quiesce_work() helper introduced by this
patch has the same synchronize_irq() issue raised on the previous
patch — to_pci_dev(parent)->irq is not the correct IRQ line for the
ACP dedicated interrupt. The disable_work_sync()/enable_work()
pattern also introduces a new window where a late IRQ can re-queue
work after enable_work() but before clock stop completes.
Please drop this patch. The fix is already on-list as part of our
v3 series, and v4 with further improvements is being prepared.
> Fixes: 81ff58ff71ad ("soundwire: amd: add runtime pm ops for AMD SoundWire manager driver")
> Closes: https://sashiko.dev/#/bug/linux-3b774ace-00cf-41e6-82eb-85cd43f5e1d6
> Cc: stable@vger.kernel.org
> Signed-off-by: Lee Jones <lee@kernel.org>
> ---
> drivers/soundwire/amd_manager.c | 40 ++++++++++++++++++++++++++++-----
> 1 file changed, 34 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/soundwire/amd_manager.c b/drivers/soundwire/amd_manager.c
> index f39f4f04db7e..ba8e6d42c467 100644
> --- a/drivers/soundwire/amd_manager.c
> +++ b/drivers/soundwire/amd_manager.c
> @@ -148,9 +148,24 @@ static void amd_disable_sdw_interrupts(struct amd_sdw_manager *amd_manager)
> writel(0x00, amd_manager->mmio + ACP_SW_ERROR_INTR_MASK);
> }
>
> +static void amd_sdw_quiesce_work(struct amd_sdw_manager *amd_manager)
> +{
> + struct device *parent = amd_manager->dev->parent;
> +
> + disable_work_sync(&amd_manager->amd_sdw_work);
> + writel(0, amd_manager->mmio + ACP_SW_STATE_CHANGE_STATUS_MASK_0TO7);
> + writel(0, amd_manager->mmio + ACP_SW_STATE_CHANGE_STATUS_MASK_8TO11);
> + writel(0, amd_manager->mmio + ACP_SW_ERROR_INTR_MASK);
> + if (parent && dev_is_pci(parent))
> + synchronize_irq(to_pci_dev(parent)->irq);
> + cancel_work_sync(&amd_manager->amd_sdw_irq_thread);
> + enable_work(&amd_manager->amd_sdw_work);
> +}
> +
> static int amd_deinit_sdw_manager(struct amd_sdw_manager *amd_manager)
> {
> amd_disable_sdw_interrupts(amd_manager);
> + amd_sdw_quiesce_work(amd_manager);
> return amd_disable_sdw_manager(amd_manager);
> }
>
> @@ -1049,6 +1064,14 @@ static void amd_sdw_irq_thread(struct work_struct *work)
> u32 status_change_8to11;
> u32 status_change_0to7;
>
> + if (amd_manager->clk_stopped) {
> + status_change_8to11 = readl(amd_manager->mmio +
> + ACP_SW_STATE_CHANGE_STATUS_8TO11);
> + if (status_change_8to11 & AMD_SDW_WAKE_STAT_MASK)
> + amd_sdw_process_wake_event(amd_manager);
> + return;
> + }
> +
> status_change_8to11 = readl(amd_manager->mmio + ACP_SW_STATE_CHANGE_STATUS_8TO11);
> status_change_0to7 = readl(amd_manager->mmio + ACP_SW_STATE_CHANGE_STATUS_0TO7);
> if (!status_change_0to7 && !status_change_8to11)
> @@ -1341,24 +1364,24 @@ static int __maybe_unused amd_suspend(struct device *dev)
> }
>
> if (amd_manager->power_mode_mask & AMD_SDW_CLK_STOP_MODE) {
> - cancel_work_sync(&amd_manager->amd_sdw_work);
> - amd_sdw_wake_enable(amd_manager, false);
> if (amd_manager->acp_rev >= ACP70_PCI_REV_ID) {
> ret = amd_sdw_host_wake_enable(amd_manager, false);
> if (ret)
> return ret;
> }
> + amd_sdw_quiesce_work(amd_manager);
> + amd_sdw_wake_enable(amd_manager, false);
> ret = amd_sdw_clock_stop(amd_manager);
> if (ret)
> return ret;
> } else if (amd_manager->power_mode_mask & AMD_SDW_POWER_OFF_MODE) {
> - cancel_work_sync(&amd_manager->amd_sdw_work);
> - amd_sdw_wake_enable(amd_manager, false);
> if (amd_manager->acp_rev >= ACP70_PCI_REV_ID) {
> ret = amd_sdw_host_wake_enable(amd_manager, false);
> if (ret)
> return ret;
> }
> + amd_sdw_quiesce_work(amd_manager);
> + amd_sdw_wake_enable(amd_manager, false);
> /*
> * As per hardware programming sequence on AMD platforms,
> * clock stop should be invoked first before powering-off
> @@ -1391,25 +1414,29 @@ static int __maybe_unused amd_suspend_runtime(struct device *dev)
> return 0;
> }
> if (amd_manager->power_mode_mask & AMD_SDW_CLK_STOP_MODE) {
> - amd_sdw_wake_enable(amd_manager, true);
> if (amd_manager->acp_rev >= ACP70_PCI_REV_ID) {
> ret = amd_sdw_host_wake_enable(amd_manager, true);
> if (ret)
> return ret;
> }
> + amd_sdw_quiesce_work(amd_manager);
> ret = amd_sdw_clock_stop(amd_manager);
> if (ret)
> return ret;
> + if (amd_manager->clk_stopped)
> + amd_sdw_wake_enable(amd_manager, true);
> } else if (amd_manager->power_mode_mask & AMD_SDW_POWER_OFF_MODE) {
> - amd_sdw_wake_enable(amd_manager, true);
> if (amd_manager->acp_rev >= ACP70_PCI_REV_ID) {
> ret = amd_sdw_host_wake_enable(amd_manager, true);
> if (ret)
> return ret;
> }
> + amd_sdw_quiesce_work(amd_manager);
> ret = amd_sdw_clock_stop(amd_manager);
> if (ret)
> return ret;
> + if (amd_manager->clk_stopped)
> + amd_sdw_wake_enable(amd_manager, true);
> ret = amd_deinit_sdw_manager(amd_manager);
> if (ret)
> return ret;
> @@ -1452,6 +1479,7 @@ static int __maybe_unused amd_resume_runtime(struct device *dev)
> if (ret)
> return ret;
> }
> + amd_enable_sdw_interrupts(amd_manager);
> } else if (amd_manager->power_mode_mask & AMD_SDW_POWER_OFF_MODE) {
> writel(0x00, amd_manager->acp_mmio + ACP_SW_WAKE_EN(amd_manager->instance));
> if (amd_manager->acp_rev >= ACP70_PCI_REV_ID) {
next prev parent reply other threads:[~2026-10-30 12:35 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 10:46 [PATCH 00/21] soundwire: Fix Critical and High issues reported by Sashiko Lee Jones
2026-10-30 10:46 ` [PATCH 01/21] soundwire: bus: Hold bus_lock when looking up slave devices Lee Jones
2026-10-30 10:46 ` [PATCH 02/21] soundwire: sysfs: Use sysfs_emit_at() in array show callbacks Lee Jones
2026-10-30 10:46 ` [PATCH 03/21] soundwire: stream: Prevent m_rt_count underflow in sdw_stream_remove_master() Lee Jones
2026-10-30 11:09 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 04/21] soundwire: stream: Clean up allocated runtime resources on config failure Lee Jones
2026-10-30 10:46 ` [PATCH 05/21] ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams Lee Jones
2026-10-30 11:14 ` Mark Brown
2026-10-30 11:38 ` Vinod Koul
2026-10-30 12:03 ` Lee Jones
2026-10-30 12:25 ` Péter Ujfalusi
2026-10-30 10:46 ` [PATCH 06/21] soundwire: intel_ace2x: Protect bus.bpt_stream with bus_lock Lee Jones
2026-10-30 11:26 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 07/21] soundwire: qcom: Prevent pconfig buffer overflow in qcom_swrm_stream_alloc_ports() Lee Jones
2026-10-30 11:43 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 08/21] soundwire: qcom: Disable runtime PM and avoid clock underflow in qcom_swrm_remove() Lee Jones
2026-10-30 10:46 ` [PATCH 09/21] soundwire: qcom: Check clk_prepare_enable() return value Lee Jones
2026-10-30 10:46 ` [PATCH 10/21] soundwire: qcom: Serialise ctrl->intr_mask updates Lee Jones
2026-10-30 10:46 ` [PATCH 11/21] soundwire: qcom: Prevent stale broadcast IRQ from completing subsequent command Lee Jones
2026-10-30 10:46 ` [PATCH 12/21] soundwire: amd: Check for NULL manager drvdata in sdw_amd_startup() Lee Jones
2026-10-30 10:46 ` [PATCH 13/21] soundwire: amd: Check ping command response for timeout Lee Jones
2026-10-30 11:37 ` Mukunda,Vijendar
2026-10-30 12:04 ` Lee Jones
2026-10-30 12:15 ` sashiko-bot
2026-10-30 10:46 ` [PATCH 14/21] soundwire: amd: Preserve lane control bits in amd_sdw_port_enable() Lee Jones
2026-10-30 11:45 ` Mukunda,Vijendar
2026-10-30 11:52 ` Lee Jones
2026-10-30 10:46 ` [PATCH 15/21] soundwire: amd: Avoid static port offset leak in amd_sdw_compute_params() Lee Jones
2026-10-30 11:57 ` Mukunda,Vijendar
2026-10-30 12:04 ` Lee Jones
2026-10-30 10:46 ` [PATCH 16/21] soundwire: amd: Initialise and cancel IRQ work around manager lifetime Lee Jones
2026-10-30 12:13 ` Mukunda,Vijendar
2026-10-30 12:17 ` Lee Jones
2026-10-30 10:46 ` [PATCH 17/21] soundwire: amd: Resume manager before hardware teardown in amd_sdw_manager_remove() Lee Jones
2026-10-30 12:21 ` Mukunda,Vijendar
2026-10-30 12:21 ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 18/21] soundwire: amd: Synchronise parent IRQ and disable work on manager removal Lee Jones
2026-10-30 12:28 ` Mukunda,Vijendar
2026-10-30 10:46 ` [PATCH 19/21] soundwire: amd: Cancel pending work before suspending manager Lee Jones
2026-10-30 12:34 ` Mukunda,Vijendar [this message]
2026-10-30 10:46 ` [PATCH 20/21] soundwire: amd: Check clock resume timeout in amd_resume_runtime() Lee Jones
2026-10-30 10:47 ` [PATCH 21/21] soundwire: amd: Disable interrupts if enabling manager fails Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8dcda015-b591-43d0-96d5-1faec73294ee@amd.com \
--to=vijendar.mukunda@amd.com \
--cc=Mastan.Katragadda@amd.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=pierre-louis.bossart@linux.dev \
--cc=stable@vger.kernel.org \
--cc=vkoul@kernel.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox