From: Takashi Iwai <tiwai@suse.de>
To: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: <broonie@kernel.org>, <lgirdwood@gmail.com>,
<linux-sound@vger.kernel.org>, <patches@opensource.cirrus.com>
Subject: Re: [PATCH] ASoC: cs42l43: Move shutter IRQ handling into a worker thread
Date: Mon, 29 Jul 2024 18:18:50 +0200 [thread overview]
Message-ID: <87plqw9no5.wl-tiwai@suse.de> (raw)
In-Reply-To: <20240729155932.3054632-1-ckeepax@opensource.cirrus.com>
On Mon, 29 Jul 2024 17:59:32 +0200,
Charles Keepax wrote:
>
> The microphone/speaker privacy shutter ALSA control handlers need to
> call pm_runtime_resume, since the hardware needs to be powered up to
> check the hardware state of the shutter. The IRQ handler for the
> shutters also needs to notify the ALSA control to inform user-space
> the shutters updated. However this leads to a mutex inversion, between
> the sdw_dev_lock and the controls_rwsem.
That's bad, how does the mutex inversion look like? Generally
speaking, a call of snd_ctl_notify() from an irq handler is a very
standard procedure, and it should work without too much workaround.
thanks,
Takashi
>
> To avoid this mutex inversion add a work item for handling the shutter
> IRQ and move the notifies into that.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
> sound/soc/codecs/cs42l43.c | 43 +++++++++++++++++++++++++++-----------
> sound/soc/codecs/cs42l43.h | 3 +++
> 2 files changed, 34 insertions(+), 12 deletions(-)
>
> diff --git a/sound/soc/codecs/cs42l43.c b/sound/soc/codecs/cs42l43.c
> index 92674314227c4..74cb396ec0576 100644
> --- a/sound/soc/codecs/cs42l43.c
> +++ b/sound/soc/codecs/cs42l43.c
> @@ -249,9 +249,10 @@ CS42L43_IRQ_COMPLETE(spkr_startup)
> CS42L43_IRQ_COMPLETE(spkl_startup)
> CS42L43_IRQ_COMPLETE(load_detect)
>
> -static irqreturn_t cs42l43_mic_shutter(int irq, void *data)
> +static void cs42l43_mic_shutter_work(struct work_struct *work)
> {
> - struct cs42l43_codec *priv = data;
> + struct cs42l43_codec *priv = container_of(work, struct cs42l43_codec,
> + mic_shutter_work);
> static const char * const controls[] = {
> "Decimator 1 Switch",
> "Decimator 2 Switch",
> @@ -263,32 +264,47 @@ static irqreturn_t cs42l43_mic_shutter(int irq, void *data)
> dev_dbg(priv->dev, "Microphone shutter changed\n");
>
> if (!priv->component)
> - return IRQ_NONE;
> + return;
>
> for (i = 0; i < ARRAY_SIZE(controls); i++) {
> - ret = snd_soc_component_notify_control(priv->component,
> - controls[i]);
> + ret = snd_soc_component_notify_control(priv->component, controls[i]);
> if (ret)
> - return IRQ_NONE;
> + dev_err(priv->dev, "Failed to notify control %s: %d\n",
> + controls[i], ret);
> }
> +}
> +
> +static irqreturn_t cs42l43_mic_shutter(int irq, void *data)
> +{
> + struct cs42l43_codec *priv = data;
> +
> + queue_work(system_wq, &priv->mic_shutter_work);
>
> return IRQ_HANDLED;
> }
>
> -static irqreturn_t cs42l43_spk_shutter(int irq, void *data)
> +static void cs42l43_spk_shutter_work(struct work_struct *work)
> {
> - struct cs42l43_codec *priv = data;
> + struct cs42l43_codec *priv = container_of(work, struct cs42l43_codec,
> + mic_shutter_work);
> + const char * const control = "Speaker Digital Switch";
> int ret;
>
> dev_dbg(priv->dev, "Speaker shutter changed\n");
>
> if (!priv->component)
> - return IRQ_NONE;
> + return;
>
> - ret = snd_soc_component_notify_control(priv->component,
> - "Speaker Digital Switch");
> + ret = snd_soc_component_notify_control(priv->component, control);
> if (ret)
> - return IRQ_NONE;
> + dev_err(priv->dev, "Failed to notify control %s: %d\n", control, ret);
> +}
> +
> +static irqreturn_t cs42l43_spk_shutter(int irq, void *data)
> +{
> + struct cs42l43_codec *priv = data;
> +
> + queue_work(system_wq, &priv->spk_shutter_work);
>
> return IRQ_HANDLED;
> }
> @@ -2280,6 +2296,9 @@ static int cs42l43_codec_probe(struct platform_device *pdev)
> INIT_WORK(&priv->button_release_work, cs42l43_button_release_work);
> INIT_WORK(&priv->hp_ilimit_work, cs42l43_hp_ilimit_work);
>
> + INIT_WORK(&priv->mic_shutter_work, cs42l43_mic_shutter_work);
> + INIT_WORK(&priv->spk_shutter_work, cs42l43_spk_shutter_work);
> +
> pm_runtime_set_autosuspend_delay(priv->dev, 100);
> pm_runtime_use_autosuspend(priv->dev);
> pm_runtime_set_active(priv->dev);
> diff --git a/sound/soc/codecs/cs42l43.h b/sound/soc/codecs/cs42l43.h
> index 9924c13e1eb53..5592aab5c8042 100644
> --- a/sound/soc/codecs/cs42l43.h
> +++ b/sound/soc/codecs/cs42l43.h
> @@ -100,6 +100,9 @@ struct cs42l43_codec {
> struct delayed_work hp_ilimit_clear_work;
> bool hp_ilimited;
> int hp_ilimit_count;
> +
> + struct work_struct mic_shutter_work;
> + struct work_struct spk_shutter_work;
> };
>
> #if IS_REACHABLE(CONFIG_SND_SOC_CS42L43_SDW)
> --
> 2.39.2
>
>
next prev parent reply other threads:[~2024-07-29 16:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-29 15:59 [PATCH] ASoC: cs42l43: Move shutter IRQ handling into a worker thread Charles Keepax
2024-07-29 16:18 ` Takashi Iwai [this message]
2024-07-29 16:44 ` Charles Keepax
2024-07-29 19:30 ` Takashi Iwai
2024-07-30 8:43 ` Charles Keepax
2024-07-30 12:33 ` Takashi Iwai
2024-07-30 14:13 ` Jaroslav Kysela
2024-07-30 14:27 ` Takashi Iwai
2024-07-30 14:44 ` Mark Brown
2024-07-30 21:47 ` Jaroslav Kysela
2024-07-30 23:20 ` Mark Brown
2024-07-31 6:30 ` Takashi Iwai
2024-07-31 8:49 ` Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87plqw9no5.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.cirrus.com \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox