[PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Srinivas Kandagatla]

This patch series adds support for Qualcomm Soundwire Controller
version v3.1.0.
As part for adding this support, a new macro of_property_read_u8_index()
is added so that we can remove the qcom,din-ports and qcom,dout-ports.
As v3.1.0 supports more than 17 soundwire ports. Also due to change in
the register offsets, new entries are added to the variant data.

Tested this patchset on X14s and Glymur reference platform.

Merge strategy:

I think the patches can go via soundwire tree given that Rob has
provided Reviewed-by on the of_property patch.
Vinod are you okay with this?


Thanks,
Srini

Changes since v2:
	- updated of_property_read_u8_index to use index of u8 array
	  instead of pointer as suggested by Rob H.
Changes since v1:
	- fixed typo in non OF config of of_property_read_u8_index
	- adjusted scoped-based cleanup initalization.
	- remove unused macros.

Srinivas Kandagatla (7):
  of: base: Add of_property_read_u8_index
  soundwire: qcom: remove unused rd_fifo_depth
  dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
  soundwire: qcom: deprecate qcom,din/out-ports
  soundwire: qcom: prepare for v3.x
  dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
  soundwire: qcom: adding support for v3.1.0

 .../bindings/soundwire/qcom,soundwire.yaml    |   8 +-
 drivers/of/property.c                         |  33 +++
 drivers/soundwire/qcom.c                      | 249 ++++++++++--------
 include/linux/of.h                            |   9 +
 4 files changed, 185 insertions(+), 114 deletions(-)

-- 
2.50.0

[PATCH v3 1/7] of: base: Add of_property_read_u8_index

[Srinivas Kandagatla]

Add support for of_property_read_u8_index(), simillar to others
u16 and u32 variants. Having this helper makes the code more tidy in
isome cases, specially when we are parsing multiple of these into
data structures.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---
 drivers/of/property.c | 33 +++++++++++++++++++++++++++++++++
 include/linux/of.h    |  9 +++++++++
 2 files changed, 42 insertions(+)

diff --git a/drivers/of/property.c b/drivers/of/property.c
index c1feb631e383..4e3524227720 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -147,6 +147,39 @@ static void *of_find_property_value_of_size(const struct device_node *np,
 	return prop->value;
 }
 
+/**
+ * of_property_read_u8_index - Find and read a u8 from a multi-value property.
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @index:	index of the u8 in the list of values
+ * @out_value:	pointer to return value, modified only if no error.
+ *
+ * Search for a property in a device node and read nth 8-bit value from
+ * it.
+ *
+ * Return: 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_value is modified only if a valid u8 value can be decoded.
+ */
+int of_property_read_u8_index(const struct device_node *np,
+				       const char *propname,
+				       u32 index, u8 *out_value)
+{
+	const u8 *val = of_find_property_value_of_size(np, propname,
+					((index + 1) * sizeof(*out_value)),
+					0, NULL);
+
+	if (IS_ERR(val))
+		return PTR_ERR(val);
+
+	*out_value = val[index];
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_property_read_u8_index);
+
 /**
  * of_property_read_u16_index - Find and read a u16 from a multi-value property.
  *
diff --git a/include/linux/of.h b/include/linux/of.h
index a62154aeda1b..0c95e26c7191 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -316,6 +316,9 @@ extern struct property *of_find_property(const struct device_node *np,
 extern bool of_property_read_bool(const struct device_node *np, const char *propname);
 extern int of_property_count_elems_of_size(const struct device_node *np,
 				const char *propname, int elem_size);
+extern int of_property_read_u8_index(const struct device_node *np,
+				       const char *propname,
+				       u32 index, u8 *out_value);
 extern int of_property_read_u16_index(const struct device_node *np,
 				       const char *propname,
 				       u32 index, u16 *out_value);
@@ -639,6 +642,12 @@ static inline int of_property_count_elems_of_size(const struct device_node *np,
 	return -ENOSYS;
 }
 
+static inline int of_property_read_u8_index(const struct device_node *np,
+			const char *propname, u32 index, u8 *out_value)
+{
+	return -ENOSYS;
+}
+
 static inline int of_property_read_u16_index(const struct device_node *np,
 			const char *propname, u32 index, u16 *out_value)
 {
-- 
2.50.0

[PATCH v3 2/7] soundwire: qcom: remove unused rd_fifo_depth

[Srinivas Kandagatla]

remove read fifo depth field parsing logic, as rd_fifo_depth is never
used in the driver. Cleaning this up would benefit when adding new
variant support which includes adding variant fields for rd_fifo_depth.

ex: Glymur has this rd_fifo_depth register fields changed from v2.x

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 drivers/soundwire/qcom.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 5b3078220189..f3ad53ec6e76 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -209,7 +209,6 @@ struct qcom_swrm_ctrl {
 	int (*reg_write)(struct qcom_swrm_ctrl *ctrl, int reg, int val);
 	u32 slave_status;
 	u32 wr_fifo_depth;
-	u32 rd_fifo_depth;
 	bool clock_stop_not_supported;
 };
 
@@ -898,7 +897,6 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
 	swrm_wait_for_frame_gen_enabled(ctrl);
 	ctrl->slave_status = 0;
 	ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
-	ctrl->rd_fifo_depth = FIELD_GET(SWRM_COMP_PARAMS_RD_FIFO_DEPTH, val);
 	ctrl->wr_fifo_depth = FIELD_GET(SWRM_COMP_PARAMS_WR_FIFO_DEPTH, val);
 
 	return 0;
-- 
2.50.0

[PATCH v3 3/7] dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports

[Srinivas Kandagatla]

Number of input and output ports can be dynamically read from the
controller registers, getting this value from Device Tree is redundant
and potentially lead to bugs.

Mark these two properties as deprecated in device tree bindings.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/soundwire/qcom,soundwire.yaml      | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index 95d947fda6a7..7ea491f7e828 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -73,10 +73,12 @@ properties:
   qcom,din-ports:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: count of data in ports
+    deprecated: true
 
   qcom,dout-ports:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: count of data out ports
+    deprecated: true
 
   qcom,ports-word-length:
     $ref: /schemas/types.yaml#/definitions/uint8-array
@@ -223,8 +225,6 @@ required:
   - '#sound-dai-cells'
   - '#address-cells'
   - '#size-cells'
-  - qcom,dout-ports
-  - qcom,din-ports
   - qcom,ports-offset1
   - qcom,ports-offset2
 
@@ -257,9 +257,6 @@ examples:
         clocks = <&lpass_rx_macro>;
         clock-names = "iface";
 
-        qcom,din-ports = <0>;
-        qcom,dout-ports = <5>;
-
         resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
         reset-names = "swr_audio_cgcr";
 
-- 
2.50.0

[PATCH v3 4/7] soundwire: qcom: deprecate qcom,din/out-ports

[Srinivas Kandagatla]

Number of input and output ports can be dynamically read from the
controller registers, getting this value from Device Tree is redundant
and potentially lead to bugs.

Remove the code parsing this property along with marking this as
deprecated in device tree bindings.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
 drivers/soundwire/qcom.c | 133 ++++++++++++++-------------------------
 1 file changed, 48 insertions(+), 85 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index f3ad53ec6e76..34d4e2c2dd0a 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -128,7 +128,6 @@
 #define MAX_FREQ_NUM						1
 #define TIMEOUT_MS						100
 #define QCOM_SWRM_MAX_RD_LEN					0x1
-#define QCOM_SDW_MAX_PORTS					14
 #define DEFAULT_CLK_FREQ					9600000
 #define SWRM_MAX_DAIS						0xF
 #define SWR_INVALID_PARAM					0xFF
@@ -195,6 +194,7 @@ struct qcom_swrm_ctrl {
 	int wake_irq;
 	int num_din_ports;
 	int num_dout_ports;
+	int nports;
 	int cols_index;
 	int rows_index;
 	unsigned long port_mask;
@@ -202,7 +202,7 @@ struct qcom_swrm_ctrl {
 	u8 rcmd_id;
 	u8 wcmd_id;
 	/* Port numbers are 1 - 14 */
-	struct qcom_swrm_port_config pconfig[QCOM_SDW_MAX_PORTS + 1];
+	struct qcom_swrm_port_config *pconfig;
 	struct sdw_stream_runtime *sruntime[SWRM_MAX_DAIS];
 	enum sdw_slave_status status[SDW_MAX_DEVICES + 1];
 	int (*reg_read)(struct qcom_swrm_ctrl *ctrl, int reg, u32 *val);
@@ -1153,7 +1153,6 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl,
 				       struct snd_pcm_hw_params *params,
 				       int direction)
 {
-	struct sdw_port_config pconfig[QCOM_SDW_MAX_PORTS];
 	struct sdw_stream_config sconfig;
 	struct sdw_master_runtime *m_rt;
 	struct sdw_slave_runtime *s_rt;
@@ -1162,6 +1161,10 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl,
 	unsigned long *port_mask;
 	int maxport, pn, nports = 0, ret = 0;
 	unsigned int m_port;
+	struct sdw_port_config *pconfig __free(kfree) = kcalloc(ctrl->nports,
+								sizeof(*pconfig), GFP_KERNEL);
+	if (!pconfig)
+		return -ENOMEM;
 
 	if (direction == SNDRV_PCM_STREAM_CAPTURE)
 		sconfig.direction = SDW_DATA_DIR_TX;
@@ -1186,8 +1189,7 @@ static int qcom_swrm_stream_alloc_ports(struct qcom_swrm_ctrl *ctrl,
 			continue;
 
 		port_mask = &ctrl->port_mask;
-		maxport = ctrl->num_dout_ports + ctrl->num_din_ports;
-
+		maxport = ctrl->nports;
 
 		list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
 			slave = s_rt->slave;
@@ -1347,106 +1349,67 @@ static int qcom_swrm_register_dais(struct qcom_swrm_ctrl *ctrl)
 static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 {
 	struct device_node *np = ctrl->dev->of_node;
-	u8 off1[QCOM_SDW_MAX_PORTS];
-	u8 off2[QCOM_SDW_MAX_PORTS];
-	u16 si[QCOM_SDW_MAX_PORTS];
-	u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, };
-	u8 hstart[QCOM_SDW_MAX_PORTS];
-	u8 hstop[QCOM_SDW_MAX_PORTS];
-	u8 word_length[QCOM_SDW_MAX_PORTS];
-	u8 blk_group_count[QCOM_SDW_MAX_PORTS];
-	u8 lane_control[QCOM_SDW_MAX_PORTS];
-	int i, ret, nports, val;
-	bool si_16 = false;
+	struct qcom_swrm_port_config *pcfg;
+	int i, ret, val;
 
 	ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
 
 	ctrl->num_dout_ports = FIELD_GET(SWRM_COMP_PARAMS_DOUT_PORTS_MASK, val);
 	ctrl->num_din_ports = FIELD_GET(SWRM_COMP_PARAMS_DIN_PORTS_MASK, val);
 
-	ret = of_property_read_u32(np, "qcom,din-ports", &val);
-	if (ret)
-		return ret;
-
-	if (val > ctrl->num_din_ports)
-		return -EINVAL;
-
-	ctrl->num_din_ports = val;
-
-	ret = of_property_read_u32(np, "qcom,dout-ports", &val);
-	if (ret)
-		return ret;
-
-	if (val > ctrl->num_dout_ports)
-		return -EINVAL;
-
-	ctrl->num_dout_ports = val;
+	ctrl->nports = ctrl->num_dout_ports + ctrl->num_din_ports;
 
-	nports = ctrl->num_dout_ports + ctrl->num_din_ports;
-	if (nports > QCOM_SDW_MAX_PORTS)
-		return -EINVAL;
+	ctrl->pconfig = devm_kcalloc(ctrl->dev, ctrl->nports + 1,
+					sizeof(*ctrl->pconfig), GFP_KERNEL);
+	if (!ctrl->pconfig)
+		return -ENOMEM;
 
-	/* Valid port numbers are from 1-14, so mask out port 0 explicitly */
 	set_bit(0, &ctrl->port_mask);
+	/* Valid port numbers are from 1, so mask out port 0 explicitly */
+	for (i = 0; i < ctrl->nports; i++) {
+		pcfg = &ctrl->pconfig[i + 1];
 
-	ret = of_property_read_u8_array(np, "qcom,ports-offset1",
-					off1, nports);
-	if (ret)
-		return ret;
-
-	ret = of_property_read_u8_array(np, "qcom,ports-offset2",
-					off2, nports);
-	if (ret)
-		return ret;
-
-	ret = of_property_read_u8_array(np, "qcom,ports-sinterval-low",
-					(u8 *)si, nports);
-	if (ret) {
-		ret = of_property_read_u16_array(np, "qcom,ports-sinterval",
-						 si, nports);
+		ret = of_property_read_u8_index(np, "qcom,ports-offset1", i, &pcfg->off1);
 		if (ret)
 			return ret;
-		si_16 = true;
-	}
 
-	ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode",
-					bp_mode, nports);
-	if (ret) {
-		if (ctrl->version <= SWRM_VERSION_1_3_0)
-			memset(bp_mode, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
-		else
+		ret = of_property_read_u8_index(np, "qcom,ports-offset2", i, &pcfg->off2);
+		if (ret)
 			return ret;
-	}
 
-	memset(hstart, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
-	of_property_read_u8_array(np, "qcom,ports-hstart", hstart, nports);
+		ret = of_property_read_u8_index(np, "qcom,ports-sinterval-low", i, (u8 *)&pcfg->si);
+		if (ret) {
+			ret = of_property_read_u16_index(np, "qcom,ports-sinterval", i, &pcfg->si);
+			if (ret)
+				return ret;
+		}
+
+		ret = of_property_read_u8_index(np, "qcom,ports-block-pack-mode",
+						i, &pcfg->bp_mode);
+		if (ret) {
+			if (ctrl->version <= SWRM_VERSION_1_3_0)
+				pcfg->bp_mode = SWR_INVALID_PARAM;
+			else
+				return ret;
+		}
 
-	memset(hstop, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
-	of_property_read_u8_array(np, "qcom,ports-hstop", hstop, nports);
+		/* Optional properties */
+		pcfg->hstart = SWR_INVALID_PARAM;
+		pcfg->hstop = SWR_INVALID_PARAM;
+		pcfg->word_length = SWR_INVALID_PARAM;
+		pcfg->blk_group_count = SWR_INVALID_PARAM;
+		pcfg->lane_control = SWR_INVALID_PARAM;
 
-	memset(word_length, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
-	of_property_read_u8_array(np, "qcom,ports-word-length", word_length, nports);
+		of_property_read_u8_index(np, "qcom,ports-hstart", i, &pcfg->hstart);
 
-	memset(blk_group_count, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
-	of_property_read_u8_array(np, "qcom,ports-block-group-count", blk_group_count, nports);
+		of_property_read_u8_index(np, "qcom,ports-hstop", i, &pcfg->hstop);
 
-	memset(lane_control, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
-	of_property_read_u8_array(np, "qcom,ports-lane-control", lane_control, nports);
+		of_property_read_u8_index(np, "qcom,ports-word-length", i, &pcfg->word_length);
 
-	for (i = 0; i < nports; i++) {
-		/* Valid port number range is from 1-14 */
-		if (si_16)
-			ctrl->pconfig[i + 1].si = si[i];
-		else
-			ctrl->pconfig[i + 1].si = ((u8 *)si)[i];
-		ctrl->pconfig[i + 1].off1 = off1[i];
-		ctrl->pconfig[i + 1].off2 = off2[i];
-		ctrl->pconfig[i + 1].bp_mode = bp_mode[i];
-		ctrl->pconfig[i + 1].hstart = hstart[i];
-		ctrl->pconfig[i + 1].hstop = hstop[i];
-		ctrl->pconfig[i + 1].word_length = word_length[i];
-		ctrl->pconfig[i + 1].blk_group_count = blk_group_count[i];
-		ctrl->pconfig[i + 1].lane_control = lane_control[i];
+		of_property_read_u8_index(np, "qcom,ports-block-group-count",
+					i, &pcfg->blk_group_count);
+
+		of_property_read_u8_index(np, "qcom,ports-lane-control", i, &pcfg->lane_control);
 	}
 
 	return 0;
-- 
2.50.0

[PATCH v3 5/7] soundwire: qcom: prepare for v3.x

[Srinivas Kandagatla]

cleanup the register layout structs to prepare for adding new 3.x
controller support.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
 drivers/soundwire/qcom.c | 77 +++++++++++++++++++++++++++++-----------
 1 file changed, 56 insertions(+), 21 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 34d4e2c2dd0a..3d4d0c443977 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -99,14 +99,15 @@
 #define SWRM_MCP_SLV_STATUS					0x1090
 #define SWRM_MCP_SLV_STATUS_MASK				GENMASK(1, 0)
 #define SWRM_MCP_SLV_STATUS_SZ					2
-#define SWRM_DP_PORT_CTRL_BANK(n, m)	(0x1124 + 0x100 * (n - 1) + 0x40 * m)
-#define SWRM_DP_PORT_CTRL_2_BANK(n, m)	(0x1128 + 0x100 * (n - 1) + 0x40 * m)
-#define SWRM_DP_BLOCK_CTRL_1(n)		(0x112C + 0x100 * (n - 1))
-#define SWRM_DP_BLOCK_CTRL2_BANK(n, m)	(0x1130 + 0x100 * (n - 1) + 0x40 * m)
-#define SWRM_DP_PORT_HCTRL_BANK(n, m)	(0x1134 + 0x100 * (n - 1) + 0x40 * m)
-#define SWRM_DP_BLOCK_CTRL3_BANK(n, m)	(0x1138 + 0x100 * (n - 1) + 0x40 * m)
-#define SWRM_DP_SAMPLECTRL2_BANK(n, m)	(0x113C + 0x100 * (n - 1) + 0x40 * m)
-#define SWRM_DIN_DPn_PCM_PORT_CTRL(n)	(0x1054 + 0x100 * (n - 1))
+
+#define SWRM_DPn_PORT_CTRL_BANK(offset, n, m)	(offset + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DPn_PORT_CTRL_2_BANK(offset, n, m)	(offset + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DPn_BLOCK_CTRL_1(offset, n)	(offset + 0x100 * (n - 1))
+#define SWRM_DPn_BLOCK_CTRL2_BANK(offset, n, m)	(offset + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DPn_PORT_HCTRL_BANK(offset,  n, m)	(offset + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DPn_BLOCK_CTRL3_BANK(offset, n, m)	(offset + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DPn_SAMPLECTRL2_BANK(offset, n, m)	(offset + 0x100 * (n - 1) + 0x40 * m)
+
 #define SWR_V1_3_MSTR_MAX_REG_ADDR				0x1740
 #define SWR_V2_0_MSTR_MAX_REG_ADDR				0x50ac
 
@@ -171,6 +172,13 @@ enum {
 	SWRM_REG_CMD_FIFO_RD_CMD,
 	SWRM_REG_CMD_FIFO_STATUS,
 	SWRM_REG_CMD_FIFO_RD_FIFO_ADDR,
+	SWRM_OFFSET_DP_PORT_CTRL_BANK,
+	SWRM_OFFSET_DP_PORT_CTRL_2_BANK,
+	SWRM_OFFSET_DP_BLOCK_CTRL_1,
+	SWRM_OFFSET_DP_BLOCK_CTRL2_BANK,
+	SWRM_OFFSET_DP_PORT_HCTRL_BANK,
+	SWRM_OFFSET_DP_BLOCK_CTRL3_BANK,
+	SWRM_OFFSET_DP_SAMPLECTRL2_BANK,
 };
 
 struct qcom_swrm_ctrl {
@@ -230,6 +238,13 @@ static const unsigned int swrm_v1_3_reg_layout[] = {
 	[SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V1_3_CMD_FIFO_RD_CMD,
 	[SWRM_REG_CMD_FIFO_STATUS] = SWRM_V1_3_CMD_FIFO_STATUS,
 	[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR,
+	[SWRM_OFFSET_DP_PORT_CTRL_BANK]		= 0x1124,
+	[SWRM_OFFSET_DP_PORT_CTRL_2_BANK]	= 0x1128,
+	[SWRM_OFFSET_DP_BLOCK_CTRL_1]		= 0x112c,
+	[SWRM_OFFSET_DP_BLOCK_CTRL2_BANK]	= 0x1130,
+	[SWRM_OFFSET_DP_PORT_HCTRL_BANK]	= 0x1134,
+	[SWRM_OFFSET_DP_BLOCK_CTRL3_BANK]	= 0x1138,
+	[SWRM_OFFSET_DP_SAMPLECTRL2_BANK]	= 0x113c,
 };
 
 static const struct qcom_swrm_data swrm_v1_3_data = {
@@ -264,6 +279,13 @@ static const unsigned int swrm_v2_0_reg_layout[] = {
 	[SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V2_0_CMD_FIFO_RD_CMD,
 	[SWRM_REG_CMD_FIFO_STATUS] = SWRM_V2_0_CMD_FIFO_STATUS,
 	[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR,
+	[SWRM_OFFSET_DP_PORT_CTRL_BANK]		= 0x1124,
+	[SWRM_OFFSET_DP_PORT_CTRL_2_BANK]	= 0x1128,
+	[SWRM_OFFSET_DP_BLOCK_CTRL_1]		= 0x112c,
+	[SWRM_OFFSET_DP_BLOCK_CTRL2_BANK]	= 0x1130,
+	[SWRM_OFFSET_DP_PORT_HCTRL_BANK]	= 0x1134,
+	[SWRM_OFFSET_DP_BLOCK_CTRL3_BANK]	= 0x1138,
+	[SWRM_OFFSET_DP_SAMPLECTRL2_BANK]	= 0x113c,
 };
 
 static const struct qcom_swrm_data swrm_v2_0_data = {
@@ -964,10 +986,10 @@ static int qcom_swrm_port_params(struct sdw_bus *bus,
 				 unsigned int bank)
 {
 	struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
+	u32 offset = ctrl->reg_layout[SWRM_OFFSET_DP_BLOCK_CTRL_1];
 
-	return ctrl->reg_write(ctrl, SWRM_DP_BLOCK_CTRL_1(p_params->num),
-			       p_params->bps - 1);
-
+	return ctrl->reg_write(ctrl, SWRM_DPn_BLOCK_CTRL_1(offset, p_params->num),
+				p_params->bps - 1);
 }
 
 static int qcom_swrm_transport_params(struct sdw_bus *bus,
@@ -977,9 +999,11 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
 	struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
 	struct qcom_swrm_port_config *pcfg;
 	u32 value;
-	int reg = SWRM_DP_PORT_CTRL_BANK((params->port_num), bank);
+	int reg, offset = ctrl->reg_layout[SWRM_OFFSET_DP_PORT_CTRL_BANK];
 	int ret;
 
+	reg = SWRM_DPn_PORT_CTRL_BANK(offset, params->port_num, bank);
+
 	pcfg = &ctrl->pconfig[params->port_num];
 
 	value = pcfg->off1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT;
@@ -991,15 +1015,19 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
 		goto err;
 
 	if (pcfg->si > 0xff) {
+		offset = ctrl->reg_layout[SWRM_OFFSET_DP_SAMPLECTRL2_BANK];
 		value = (pcfg->si >> 8) & 0xff;
-		reg = SWRM_DP_SAMPLECTRL2_BANK(params->port_num, bank);
+		reg = SWRM_DPn_SAMPLECTRL2_BANK(offset, params->port_num, bank);
+
 		ret = ctrl->reg_write(ctrl, reg, value);
 		if (ret)
 			goto err;
 	}
 
 	if (pcfg->lane_control != SWR_INVALID_PARAM) {
-		reg = SWRM_DP_PORT_CTRL_2_BANK(params->port_num, bank);
+		offset = ctrl->reg_layout[SWRM_OFFSET_DP_PORT_CTRL_2_BANK];
+		reg = SWRM_DPn_PORT_CTRL_2_BANK(offset, params->port_num, bank);
+
 		value = pcfg->lane_control;
 		ret = ctrl->reg_write(ctrl, reg, value);
 		if (ret)
@@ -1007,20 +1035,23 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
 	}
 
 	if (pcfg->blk_group_count != SWR_INVALID_PARAM) {
-		reg = SWRM_DP_BLOCK_CTRL2_BANK(params->port_num, bank);
+		offset = ctrl->reg_layout[SWRM_OFFSET_DP_BLOCK_CTRL2_BANK];
+
+		reg = SWRM_DPn_BLOCK_CTRL2_BANK(offset, params->port_num, bank);
+
 		value = pcfg->blk_group_count;
 		ret = ctrl->reg_write(ctrl, reg, value);
 		if (ret)
 			goto err;
 	}
 
-	if (pcfg->hstart != SWR_INVALID_PARAM
-			&& pcfg->hstop != SWR_INVALID_PARAM) {
-		reg = SWRM_DP_PORT_HCTRL_BANK(params->port_num, bank);
+	offset = ctrl->reg_layout[SWRM_OFFSET_DP_PORT_HCTRL_BANK];
+	reg = SWRM_DPn_PORT_HCTRL_BANK(offset, params->port_num, bank);
+
+	if (pcfg->hstart != SWR_INVALID_PARAM && pcfg->hstop != SWR_INVALID_PARAM) {
 		value = (pcfg->hstop << 4) | pcfg->hstart;
 		ret = ctrl->reg_write(ctrl, reg, value);
 	} else {
-		reg = SWRM_DP_PORT_HCTRL_BANK(params->port_num, bank);
 		value = (SWR_HSTOP_MAX_VAL << 4) | SWR_HSTART_MIN_VAL;
 		ret = ctrl->reg_write(ctrl, reg, value);
 	}
@@ -1029,7 +1060,8 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
 		goto err;
 
 	if (pcfg->bp_mode != SWR_INVALID_PARAM) {
-		reg = SWRM_DP_BLOCK_CTRL3_BANK(params->port_num, bank);
+		offset = ctrl->reg_layout[SWRM_OFFSET_DP_BLOCK_CTRL3_BANK];
+		reg = SWRM_DPn_BLOCK_CTRL3_BANK(offset, params->port_num, bank);
 		ret = ctrl->reg_write(ctrl, reg, pcfg->bp_mode);
 	}
 
@@ -1041,9 +1073,12 @@ static int qcom_swrm_port_enable(struct sdw_bus *bus,
 				 struct sdw_enable_ch *enable_ch,
 				 unsigned int bank)
 {
-	u32 reg = SWRM_DP_PORT_CTRL_BANK(enable_ch->port_num, bank);
+	u32 reg;
 	struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
 	u32 val;
+	u32 offset = ctrl->reg_layout[SWRM_OFFSET_DP_PORT_CTRL_BANK];
+
+	reg = SWRM_DPn_PORT_CTRL_BANK(offset, enable_ch->port_num, bank);
 
 	ctrl->reg_read(ctrl, reg, &val);
 
-- 
2.50.0

[PATCH v3 6/7] dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block

[Srinivas Kandagatla]

Add bindings for Soundwire controllers v3.1.0, which is available on
Qualcomm Glymur SoC.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
index 7ea491f7e828..003023729fb8 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
@@ -23,6 +23,7 @@ properties:
           - qcom,soundwire-v1.6.0
           - qcom,soundwire-v1.7.0
           - qcom,soundwire-v2.0.0
+          - qcom,soundwire-v3.1.0
       - items:
           - enum:
               - qcom,soundwire-v2.1.0
-- 
2.50.0

[PATCH v3 7/7] soundwire: qcom: adding support for v3.1.0

[Srinivas Kandagatla]

Add support for controller version v3.1.0, which has changes in
register layout and some register fields compared to v2.0.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
 drivers/soundwire/qcom.c | 37 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 3d4d0c443977..a7b6d9ecc3ba 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -31,6 +31,7 @@
 #define SWRM_VERSION_1_5_1					0x01050001
 #define SWRM_VERSION_1_7_0					0x01070000
 #define SWRM_VERSION_2_0_0					0x02000000
+#define SWRM_VERSION_3_1_0					0x03010000
 #define SWRM_COMP_HW_VERSION					0x00
 #define SWRM_COMP_CFG_ADDR					0x04
 #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK			BIT(1)
@@ -40,6 +41,9 @@
 #define SWRM_COMP_PARAMS_RD_FIFO_DEPTH				GENMASK(19, 15)
 #define SWRM_COMP_PARAMS_DOUT_PORTS_MASK			GENMASK(4, 0)
 #define SWRM_COMP_PARAMS_DIN_PORTS_MASK				GENMASK(9, 5)
+#define SWRM_V3_COMP_PARAMS_WR_FIFO_DEPTH			GENMASK(17, 10)
+#define SWRM_V3_COMP_PARAMS_RD_FIFO_DEPTH			GENMASK(23, 18)
+
 #define SWRM_COMP_MASTER_ID					0x104
 #define SWRM_V1_3_INTERRUPT_STATUS				0x200
 #define SWRM_V2_0_INTERRUPT_STATUS				0x5000
@@ -296,6 +300,32 @@ static const struct qcom_swrm_data swrm_v2_0_data = {
 	.reg_layout = swrm_v2_0_reg_layout,
 };
 
+static const unsigned int swrm_v3_0_reg_layout[] = {
+	[SWRM_REG_FRAME_GEN_ENABLED] = SWRM_V2_0_LINK_STATUS,
+	[SWRM_REG_INTERRUPT_STATUS] = SWRM_V2_0_INTERRUPT_STATUS,
+	[SWRM_REG_INTERRUPT_MASK_ADDR] = 0, /* Not present */
+	[SWRM_REG_INTERRUPT_CLEAR] = SWRM_V2_0_INTERRUPT_CLEAR,
+	[SWRM_REG_INTERRUPT_CPU_EN] = SWRM_V2_0_INTERRUPT_CPU_EN,
+	[SWRM_REG_CMD_FIFO_WR_CMD] = SWRM_V2_0_CMD_FIFO_WR_CMD,
+	[SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V2_0_CMD_FIFO_RD_CMD,
+	[SWRM_REG_CMD_FIFO_STATUS] = SWRM_V2_0_CMD_FIFO_STATUS,
+	[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR,
+	[SWRM_OFFSET_DP_PORT_CTRL_BANK]		= 0x1224,
+	[SWRM_OFFSET_DP_PORT_CTRL_2_BANK]	= 0x1228,
+	[SWRM_OFFSET_DP_BLOCK_CTRL_1]		= 0x122c,
+	[SWRM_OFFSET_DP_BLOCK_CTRL2_BANK]	= 0x1230,
+	[SWRM_OFFSET_DP_PORT_HCTRL_BANK]	= 0x1234,
+	[SWRM_OFFSET_DP_BLOCK_CTRL3_BANK]	= 0x1238,
+	[SWRM_OFFSET_DP_SAMPLECTRL2_BANK]	= 0x123c,
+};
+
+static const struct qcom_swrm_data swrm_v3_0_data = {
+	.default_rows = 50,
+	.default_cols = 16,
+	.sw_clk_gate_required = true,
+	.max_reg = SWR_V2_0_MSTR_MAX_REG_ADDR,
+	.reg_layout = swrm_v3_0_reg_layout,
+};
 #define to_qcom_sdw(b)	container_of(b, struct qcom_swrm_ctrl, bus)
 
 static int qcom_swrm_ahb_reg_read(struct qcom_swrm_ctrl *ctrl, int reg,
@@ -919,7 +949,11 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
 	swrm_wait_for_frame_gen_enabled(ctrl);
 	ctrl->slave_status = 0;
 	ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
-	ctrl->wr_fifo_depth = FIELD_GET(SWRM_COMP_PARAMS_WR_FIFO_DEPTH, val);
+
+	if (ctrl->version >= SWRM_VERSION_3_1_0)
+		ctrl->wr_fifo_depth = FIELD_GET(SWRM_V3_COMP_PARAMS_WR_FIFO_DEPTH, val);
+	else
+		ctrl->wr_fifo_depth = FIELD_GET(SWRM_COMP_PARAMS_WR_FIFO_DEPTH, val);
 
 	return 0;
 }
@@ -1765,6 +1799,7 @@ static const struct of_device_id qcom_swrm_of_match[] = {
 	{ .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data },
 	{ .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data },
 	{ .compatible = "qcom,soundwire-v2.0.0", .data = &swrm_v2_0_data },
+	{ .compatible = "qcom,soundwire-v3.1.0", .data = &swrm_v3_0_data },
 	{/* sentinel */},
 };
 
-- 
2.50.0

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Alexey Klimov]

On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
> This patch series adds support for Qualcomm Soundwire Controller
> version v3.1.0.
> As part for adding this support, a new macro of_property_read_u8_index()
> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
> the register offsets, new entries are added to the variant data.
>
> Tested this patchset on X14s and Glymur reference platform.

Well, I don't have any Glymur devices and no idea what is
x14s (I guess some laptop), but I picked the series locally to test
on sm8550, it seems there are some generic changes, and
qcom-soundwire probe failed:

 remoteproc remoteproc1: powering up adsp
 remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
 remoteproc remoteproc1: remote processor adsp is now up
 qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
 PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
 qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
 qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
 PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
 qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
 platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
 va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
 qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
 sched: DL replenish lagged too much
 platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found

Are there any dependencies I am missing?

When I reverted the series the audio started to work again.

Best regards,
Alexey

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Srinivas Kandagatla]

On 9/11/25 1:52 AM, Alexey Klimov wrote:
> On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
>> This patch series adds support for Qualcomm Soundwire Controller
>> version v3.1.0.
>> As part for adding this support, a new macro of_property_read_u8_index()
>> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
>> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
>> the register offsets, new entries are added to the variant data.
>>
>> Tested this patchset on X14s and Glymur reference platform.
> 
> Well, I don't have any Glymur devices and no idea what is
> x14s (I guess some laptop), but I picked the series locally to test
> on sm8550, it seems there are some generic changes, and
> qcom-soundwire probe failed:
> 
>  remoteproc remoteproc1: powering up adsp
>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>  remoteproc remoteproc1: remote processor adsp is now up
>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>  qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
>  sched: DL replenish lagged too much
>  platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found
> 
> Are there any dependencies I am missing?

Looks like there is a bug in sm8550 dts, its adding incorrect number of
ports, which is why we are seeing this error.

Its good that alteast this series is detecting some of the bugs.


--srini
> 
> When I reverted the series the audio started to work again.
> 
> Best regards,
> Alexey

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Srinivas Kandagatla]

On 9/11/25 6:49 AM, Srinivas Kandagatla wrote:
> 
> 
> On 9/11/25 1:52 AM, Alexey Klimov wrote:
>> On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
>>> This patch series adds support for Qualcomm Soundwire Controller
>>> version v3.1.0.
>>> As part for adding this support, a new macro of_property_read_u8_index()
>>> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
>>> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
>>> the register offsets, new entries are added to the variant data.
>>>
>>> Tested this patchset on X14s and Glymur reference platform.
>>
>> Well, I don't have any Glymur devices and no idea what is
>> x14s (I guess some laptop), but I picked the series locally to test
>> on sm8550, it seems there are some generic changes, and
>> qcom-soundwire probe failed:
>>
>>  remoteproc remoteproc1: powering up adsp
>>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>>  remoteproc remoteproc1: remote processor adsp is now up
>>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>>  qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
>>  sched: DL replenish lagged too much
>>  platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found
>>
>> Are there any dependencies I am missing?
> 
> Looks like there is a bug in sm8550 dts, its adding incorrect number of
> ports, which is why we are seeing this error.
> 
> Its good that alteast this series is detecting some of the bugs.
> 
Am suspecting there might be other platforms which could hit this issue.
Eventhough allowing old way is prone to errors, we could check the
existence of those properties and allow old behavior, may be with some
message or warning that incorrect ports are being setup.

--srini

> 
> --srini
>>
>> When I reverted the series the audio started to work again.
>>
>> Best regards,
>> Alexey
> 

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Srinivas Kandagatla]

Thanks Alexey,

On 9/11/25 1:52 AM, Alexey Klimov wrote:
> On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
>> This patch series adds support for Qualcomm Soundwire Controller
>> version v3.1.0.
>> As part for adding this support, a new macro of_property_read_u8_index()
>> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
>> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
>> the register offsets, new entries are added to the variant data.
>>
>> Tested this patchset on X14s and Glymur reference platform.
> 
> Well, I don't have any Glymur devices and no idea what is
> x14s (I guess some laptop), but I picked the series locally to test
> on sm8550, it seems there are some generic changes, and
> qcom-soundwire probe failed:
> 
>  remoteproc remoteproc1: powering up adsp
>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>  remoteproc remoteproc1: remote processor adsp is now up
>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>  qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
>  sched: DL replenish lagged too much
>  platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found
> 
> Are there any dependencies I am missing?

Can you pl try this change an see if it helps,

---------------------->cut<----------------------------------
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index a7b6d9ecc3ba..622cc6c31264 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -1426,6 +1426,26 @@ static int qcom_swrm_get_port_config(struct
qcom_swrm_ctrl *ctrl)
        ctrl->num_dout_ports =
FIELD_GET(SWRM_COMP_PARAMS_DOUT_PORTS_MASK, val);
        ctrl->num_din_ports = FIELD_GET(SWRM_COMP_PARAMS_DIN_PORTS_MASK,
val);

+       ret = of_property_read_u32(np, "qcom,din-ports", &val);
+       if (!ret) { /* only if present */
+               if (val != ctrl->num_din_ports) {
+                       dev_err(ctrl->dev, "din-ports (%d) miss match
with controller (%d)",
+                               val, ctrl->num_din_ports);
+               }
+
+               ctrl->num_din_ports = val;
+       }
+
+       ret = of_property_read_u32(np, "qcom,dout-ports", &val);
+       if (!ret) { /* only if present */
+               if (val != ctrl->num_dout_ports) {
+                       dev_err(ctrl->dev, "dout-ports (%d) miss match
with controller (%d)",
+                               val, ctrl->num_dout_ports);
+               }
+
+               ctrl->num_dout_ports = val;
+       }
+
        ctrl->nports = ctrl->num_dout_ports + ctrl->num_din_ports;

        ctrl->pconfig = devm_kcalloc(ctrl->dev, ctrl->nports + 1,


---------------------->cut<----------------------------------

--srini
> 
> When I reverted the series the audio started to work again.
> 
> Best regards,
> Alexey

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Krzysztof Kozlowski]

On 11/09/2025 07:49, Srinivas Kandagatla wrote:
> 
> 
> On 9/11/25 1:52 AM, Alexey Klimov wrote:
>> On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
>>> This patch series adds support for Qualcomm Soundwire Controller
>>> version v3.1.0.
>>> As part for adding this support, a new macro of_property_read_u8_index()
>>> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
>>> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
>>> the register offsets, new entries are added to the variant data.
>>>
>>> Tested this patchset on X14s and Glymur reference platform.
>>
>> Well, I don't have any Glymur devices and no idea what is
>> x14s (I guess some laptop), but I picked the series locally to test
>> on sm8550, it seems there are some generic changes, and
>> qcom-soundwire probe failed:
>>
>>  remoteproc remoteproc1: powering up adsp
>>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>>  remoteproc remoteproc1: remote processor adsp is now up
>>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>>  qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
>>  sched: DL replenish lagged too much
>>  platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found
>>
>> Are there any dependencies I am missing?
> 
> Looks like there is a bug in sm8550 dts, its adding incorrect number of
> ports, which is why we are seeing this error.


Yes, the DTS has incorrect value for number of ports. Few others have as
well. It's known (for me :) ), but I never bothered to fix it because it
is not that trivial - need also port config for missing node.

Best regards,
Krzysztof

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Srinivas Kandagatla]

On 9/11/25 7:31 AM, Krzysztof Kozlowski wrote:
> On 11/09/2025 07:49, Srinivas Kandagatla wrote:
>>
>>
>> On 9/11/25 1:52 AM, Alexey Klimov wrote:
>>> On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
>>>> This patch series adds support for Qualcomm Soundwire Controller
>>>> version v3.1.0.
>>>> As part for adding this support, a new macro of_property_read_u8_index()
>>>> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
>>>> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
>>>> the register offsets, new entries are added to the variant data.
>>>>
>>>> Tested this patchset on X14s and Glymur reference platform.
>>>
>>> Well, I don't have any Glymur devices and no idea what is
>>> x14s (I guess some laptop), but I picked the series locally to test
>>> on sm8550, it seems there are some generic changes, and
>>> qcom-soundwire probe failed:
>>>
>>>  remoteproc remoteproc1: powering up adsp
>>>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>>>  remoteproc remoteproc1: remote processor adsp is now up
>>>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>>>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>>>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>>>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>>>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>>>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>>>  qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
>>>  sched: DL replenish lagged too much
>>>  platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found
>>>
>>> Are there any dependencies I am missing?
>>
>> Looks like there is a bug in sm8550 dts, its adding incorrect number of
>> ports, which is why we are seeing this error.
> 
> 
> Yes, the DTS has incorrect value for number of ports. Few others have as
> well. It's known (for me :) ), but I never bothered to fix it because it
> is not that trivial - need also port config for missing node.

Thanks for confirming, This will need fixing at some point in time,
however for now Am happy to add some flexibility to the driver so that
it does not break things that were working. This will however result in
a new kernel message about miss match in dt, which should bring some
attention for fixing.

I have shared small patch in this thread for try.

https://lore-kernel.gnuweeb.org/linux-devicetree/b7a637d1-8868-40f3-8f82-8f5ab0684d52@oss.qualcomm.com/


--srini

> 
> Best regards,
> Krzysztof

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Alexey Klimov]

On Thu Sep 11, 2025 at 7:16 AM BST, Srinivas Kandagatla wrote:
> Thanks Alexey,
>
> On 9/11/25 1:52 AM, Alexey Klimov wrote:
>> On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
>>> This patch series adds support for Qualcomm Soundwire Controller
>>> version v3.1.0.
>>> As part for adding this support, a new macro of_property_read_u8_index()
>>> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
>>> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
>>> the register offsets, new entries are added to the variant data.
>>>
>>> Tested this patchset on X14s and Glymur reference platform.
>> 
>> Well, I don't have any Glymur devices and no idea what is
>> x14s (I guess some laptop), but I picked the series locally to test
>> on sm8550, it seems there are some generic changes, and
>> qcom-soundwire probe failed:
>> 
>>  remoteproc remoteproc1: powering up adsp
>>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>>  remoteproc remoteproc1: remote processor adsp is now up
>>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>>  qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
>>  sched: DL replenish lagged too much
>>  platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found
>> 
>> Are there any dependencies I am missing?
>
> Can you pl try this change an see if it helps,
>
> ---------------------->cut<----------------------------------
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index a7b6d9ecc3ba..622cc6c31264 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -1426,6 +1426,26 @@ static int qcom_swrm_get_port_config(struct
> qcom_swrm_ctrl *ctrl)
>         ctrl->num_dout_ports =
> FIELD_GET(SWRM_COMP_PARAMS_DOUT_PORTS_MASK, val);
>         ctrl->num_din_ports = FIELD_GET(SWRM_COMP_PARAMS_DIN_PORTS_MASK,
> val);
>
> +       ret = of_property_read_u32(np, "qcom,din-ports", &val);
> +       if (!ret) { /* only if present */
> +               if (val != ctrl->num_din_ports) {
> +                       dev_err(ctrl->dev, "din-ports (%d) miss match
> with controller (%d)",
> +                               val, ctrl->num_din_ports);
> +               }
> +
> +               ctrl->num_din_ports = val;
> +       }
> +
> +       ret = of_property_read_u32(np, "qcom,dout-ports", &val);
> +       if (!ret) { /* only if present */
> +               if (val != ctrl->num_dout_ports) {
> +                       dev_err(ctrl->dev, "dout-ports (%d) miss match
> with controller (%d)",
> +                               val, ctrl->num_dout_ports);
> +               }
> +
> +               ctrl->num_dout_ports = val;
> +       }
> +
>         ctrl->nports = ctrl->num_dout_ports + ctrl->num_din_ports;
>
>         ctrl->pconfig = devm_kcalloc(ctrl->dev, ctrl->nports + 1,
>
>
> ---------------------->cut<----------------------------------

Thanks. Yep, with that change it works/inits:

 remoteproc remoteproc1: powering up adsp
 remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
 remoteproc remoteproc1: remote processor adsp is now up
 qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
 PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
 qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
 qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
 PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
 platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
 qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
 platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
 va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
 qcom-soundwire 6d30000.soundwire: dout-ports (0) miss match with controller (1)
 wcd938x_codec audio-codec: bound sdw:2:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops [snd_soc_wcd938x_sdw])
 wcd938x_codec audio-codec: bound sdw:3:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops [snd_soc_wcd938x_sdw])
 snd-sc8280xp sound: ASoC: Parent card not yet available, widget card binding deferred
 va_macro 6d44000.codec: supply vdd-micb not found, using dummy regulator
 ALSA: Control name 'stream0.vol_ctrl0 MultiMedia1 Playback Volume' truncated to 'stream0.vol_ctrl0 MultiMedia1 Playback Volu'
 ALSA: Control name 'stream1.vol_ctrl1 MultiMedia2 Playback Volume' truncated to 'stream1.vol_ctrl1 MultiMedia2 Playback Volu'
 ALSA: Control name 'stream4.vol_ctrl4 MultiMedia5 Playback Volume' truncated to 'stream4.vol_ctrl4 MultiMedia5 Playback Volu'
 input: SM8550-QRD Headset Jack as /devices/platform/sound/sound/card0/input4

Playback works. Note the ports mismatch message ^^^

Thanks,
Alexey

Re: [PATCH v3 0/7] soundwire: qcom: add support for v3.1.0

[Srinivas Kandagatla]

On 9/12/25 7:04 AM, Alexey Klimov wrote:
> On Thu Sep 11, 2025 at 7:16 AM BST, Srinivas Kandagatla wrote:
>> Thanks Alexey,
>>
>> On 9/11/25 1:52 AM, Alexey Klimov wrote:
>>> On Thu Sep 4, 2025 at 11:56 AM BST, Srinivas Kandagatla wrote:
>>>> This patch series adds support for Qualcomm Soundwire Controller
>>>> version v3.1.0.
>>>> As part for adding this support, a new macro of_property_read_u8_index()
>>>> is added so that we can remove the qcom,din-ports and qcom,dout-ports.
>>>> As v3.1.0 supports more than 17 soundwire ports. Also due to change in
>>>> the register offsets, new entries are added to the variant data.
>>>>
>>>> Tested this patchset on X14s and Glymur reference platform.
>>>
>>> Well, I don't have any Glymur devices and no idea what is
>>> x14s (I guess some laptop), but I picked the series locally to test
>>> on sm8550, it seems there are some generic changes, and
>>> qcom-soundwire probe failed:
>>>
>>>  remoteproc remoteproc1: powering up adsp
>>>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>>>  remoteproc remoteproc1: remote processor adsp is now up
>>>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>>>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>>>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>>>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>>>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>>>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>>>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>>>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>>>  qcom-soundwire 6d30000.soundwire: probe with driver qcom-soundwire failed with error -75
>>>  sched: DL replenish lagged too much
>>>  platform sound: deferred probe pending: snd-sc8280xp: WCD Playback: codec dai not found
>>>
>>> Are there any dependencies I am missing?
>>
>> Can you pl try this change an see if it helps,
>>
>> ---------------------->cut<----------------------------------
>> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
>> index a7b6d9ecc3ba..622cc6c31264 100644
>> --- a/drivers/soundwire/qcom.c
>> +++ b/drivers/soundwire/qcom.c
>> @@ -1426,6 +1426,26 @@ static int qcom_swrm_get_port_config(struct
>> qcom_swrm_ctrl *ctrl)
>>         ctrl->num_dout_ports =
>> FIELD_GET(SWRM_COMP_PARAMS_DOUT_PORTS_MASK, val);
>>         ctrl->num_din_ports = FIELD_GET(SWRM_COMP_PARAMS_DIN_PORTS_MASK,
>> val);
>>
>> +       ret = of_property_read_u32(np, "qcom,din-ports", &val);
>> +       if (!ret) { /* only if present */
>> +               if (val != ctrl->num_din_ports) {
>> +                       dev_err(ctrl->dev, "din-ports (%d) miss match
>> with controller (%d)",
>> +                               val, ctrl->num_din_ports);
>> +               }
>> +
>> +               ctrl->num_din_ports = val;
>> +       }
>> +
>> +       ret = of_property_read_u32(np, "qcom,dout-ports", &val);
>> +       if (!ret) { /* only if present */
>> +               if (val != ctrl->num_dout_ports) {
>> +                       dev_err(ctrl->dev, "dout-ports (%d) miss match
>> with controller (%d)",
>> +                               val, ctrl->num_dout_ports);
>> +               }
>> +
>> +               ctrl->num_dout_ports = val;
>> +       }
>> +
>>         ctrl->nports = ctrl->num_dout_ports + ctrl->num_din_ports;
>>
>>         ctrl->pconfig = devm_kcalloc(ctrl->dev, ctrl->nports + 1,
>>
>>
>> ---------------------->cut<----------------------------------
> 
> Thanks. Yep, with that change it works/inits:
> 
>  remoteproc remoteproc1: powering up adsp
>  remoteproc remoteproc1: Booting fw image qcom/sm8550/adsp.mbn, size 8364
>  remoteproc remoteproc1: remote processor adsp is now up
>  qcom,fastrpc 6800000.remoteproc:glink-edge.fastrpcglink-apps-dsp.-1.-1: no reserved DMA memory for FASTRPC
>  PDR: Indication received from msm/adsp/audio_pd, state: 0x1fffffff, trans-id: 1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 12
>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 13
>  qcom,apr 6800000.remoteproc:glink-edge.adsp_apps.-1.-1: Adding APR/GPR dev: gprsvc:service:2:2
>  PDR: Indication received from msm/adsp/charger_pd, state: 0x1fffffff, trans-id: 1
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 14
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 15
>  platform 6800000.remoteproc:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 16
>  qcom-apm gprsvc:service:2:1: CMD timeout for [1001021] opcode
>  platform 6800000.remoteproc:glink-edge:gpr:service@1:dais: Adding to iommu group 17
>  va_macro 6d44000.codec: qcom,dmic-sample-rate dt entry missing
>  qcom-soundwire 6d30000.soundwire: dout-ports (0) miss match with controller (1)

>  wcd938x_codec audio-codec: bound sdw:2:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops [snd_soc_wcd938x_sdw])
>  wcd938x_codec audio-codec: bound sdw:3:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops [snd_soc_wcd938x_sdw])
>  snd-sc8280xp sound: ASoC: Parent card not yet available, widget card binding deferred
>  va_macro 6d44000.codec: supply vdd-micb not found, using dummy regulator
>  ALSA: Control name 'stream0.vol_ctrl0 MultiMedia1 Playback Volume' truncated to 'stream0.vol_ctrl0 MultiMedia1 Playback Volu'
>  ALSA: Control name 'stream1.vol_ctrl1 MultiMedia2 Playback Volume' truncated to 'stream1.vol_ctrl1 MultiMedia2 Playback Volu'
>  ALSA: Control name 'stream4.vol_ctrl4 MultiMedia5 Playback Volume' truncated to 'stream4.vol_ctrl4 MultiMedia5 Playback Volu'
>  input: SM8550-QRD Headset Jack as /devices/platform/sound/sound/card0/input4
> 
> Playback works. Note the ports mismatch message ^^^
Thanks for testing, I will fold in this change in this series.

This is very much the expected behavior.


--srini
> 
> Thanks,
> Alexey
> 
>