From: Jaime Liao <jaimeliao.tw@gmail.com>
To: linux-mtd@lists.infradead.org, linux-spi@vger.kernel.org,
tudor.ambarus@linaro.org, pratyush@kernel.org, mwalle@kernel.org,
miquel.raynal@bootlin.com, richard@nod.at, vigneshr@ti.com,
broonie@kernel.org
Cc: leoyu@mxic.com.tw, jaimeliao@mxic.com.tw
Subject: [PATCH v8 0/9] Add octal DTR support for Macronix flash
Date: Thu, 1 Feb 2024 17:43:44 +0800 [thread overview]
Message-ID: <20240201094353.33281-1-jaimeliao.tw@gmail.com> (raw)
From: JaimeLiao <jaimeliao@mxic.com.tw>
Add method for Macronix Octal DTR Eable/Disable.
Merge Tudor's patch "Allow specifying the byte order in DTR mode"
Add support for Macronix flash
v8:
Supplement missing S-o-b
Remove function spi_nor_is_octal_dtr_swab16
Split IDs by MX25 & MX66
Add dump of capability in debugfs
Add dump of params in debugfs
Add dump of reult for mtd-utils tests
Add SNOR_ID(0xC2) in last of Macronix ID table
v7:
Add dtr_swab16 judgement to enable/disable Macronix xSPI host
controller swap byte feature.
v6:
Add byte swap support for spi-mxic.c
Remove flash name in ID table.
v5:
Remove manufacturer read id function.
For increased readability, separate Flash IDs based on whether
it supports RWW feature.
v4:
Add patch for adding manufacturer read id function.
remove patch "hook manufacturer by checking first byte id"
v3:
Add patch for hook manufacturer by comparing ID 1st byte.
Add patches for specifying the byte order in DTR mode by merging
Tudor's patch.
v2:
Following exsting rules to re-create Macronix specify Octal DTR method.
change signature to jaimeliao@mxic.com.tw
Clear sector size information in flash INFO.
JaimeLiao (9):
mtd: spi-nor: add Octal DTR support for Macronix flash
spi: spi-mem: Allow specifying the byte order in Octal DTR mode
mtd: spi-nor: core: Allow specifying the byte order in Octal DTR mode
mtd: spi-nor: sfdp: Get the 8D-8D-8D byte order from BFPT
spi: mxic: Add support for swapping byte
mtd: spi-nor: add support for Macronix Octal flash MX25 series with
RWW feature
mtd: spi-nor: add support for Macronix Octal flash MX66 series with
RWW feature
mtd: spi-nor: add support for Macronix Octal flash MX25 series
mtd: spi-nor: add support for Macronix Octal flash MX66 series
drivers/mtd/spi-nor/core.c | 5 +
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/macronix.c | 169 +++++++++++++++++++++++++++++++++
drivers/mtd/spi-nor/sfdp.c | 4 +
drivers/mtd/spi-nor/sfdp.h | 1 +
drivers/spi/spi-mem.c | 4 +
drivers/spi/spi-mxic.c | 17 +++-
include/linux/spi/spi-mem.h | 6 ++
8 files changed, 203 insertions(+), 4 deletions(-)
--
2.25.1
next reply other threads:[~2024-02-01 9:44 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-01 9:43 Jaime Liao [this message]
2024-02-01 9:43 ` [PATCH v8 1/9] mtd: spi-nor: add Octal DTR support for Macronix flash Jaime Liao
2024-02-01 9:43 ` [PATCH v8 2/9] spi: spi-mem: Allow specifying the byte order in Octal DTR mode Jaime Liao
2024-02-01 12:04 ` Mark Brown
2024-02-01 15:18 ` Michael Walle
2024-02-01 9:43 ` [PATCH v8 3/9] mtd: spi-nor: core: " Jaime Liao
2024-02-01 15:28 ` Michael Walle
2024-02-01 9:43 ` [PATCH v8 4/9] mtd: spi-nor: sfdp: Get the 8D-8D-8D byte order from BFPT Jaime Liao
2024-02-01 9:43 ` [PATCH v8 5/9] spi: mxic: Add support for swapping byte Jaime Liao
2024-02-01 12:05 ` Mark Brown
2024-02-01 15:39 ` Michael Walle
2024-02-01 9:43 ` [PATCH v8 6/9] mtd: spi-nor: add support for Macronix Octal flash MX25 series with RWW feature Jaime Liao
2024-02-01 15:48 ` Michael Walle
2024-02-01 9:43 ` [PATCH v8 7/9] mtd: spi-nor: add support for Macronix Octal flash MX66 " Jaime Liao
2024-02-01 9:43 ` [PATCH v8 8/9] mtd: spi-nor: add support for Macronix Octal flash MX25 series Jaime Liao
2024-02-01 9:43 ` [PATCH v8 9/9] mtd: spi-nor: add support for Macronix Octal flash MX66 series Jaime Liao
2024-02-01 15:52 ` Michael Walle
2024-02-22 9:32 ` [PATCH v8 0/9] Add octal DTR support for Macronix flash Tudor Ambarus
2024-02-22 9:55 ` liao jaime
2024-02-26 2:02 ` Alvin Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240201094353.33281-1-jaimeliao.tw@gmail.com \
--to=jaimeliao.tw@gmail.com \
--cc=broonie@kernel.org \
--cc=jaimeliao@mxic.com.tw \
--cc=leoyu@mxic.com.tw \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mwalle@kernel.org \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=tudor.ambarus@linaro.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox