[PATCH 2/9] ARM: dts: suniv: f1c100s: add PWM node

[Andre Przywara <andre.przywara@arm.com>]

The Allwinner F1C100s family of SoCs contain a PWM controller compatible
to the one used in the A20 chip.
Add the DT node so that any users can simply enable it in their board
DT.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm/boot/dts/suniv-f1c100s.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 0edc1724407b3..d5a6324e76465 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -192,6 +192,15 @@ wdt: watchdog@1c20ca0 {
 			clocks = <&osc32k>;
 		};
 
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		uart0: serial@1c25000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c25000 0x400>;
-- 
2.25.1