[PATCH 09/19] sunxi: compile clock.c for SPL only

[Andre Przywara <andre.przywara@arm.com>]

With the clock_twi_onoff() function now being called only from the SPL,
the whole clock.c file in arch/arm/mach-sunxi is needed by SPL code
only.

Remove the redundant #ifdef from the clock_init() function, actually
this function was already only called from the SPL.
Then adjust the Makefile to compile clock.c only with CONFIG_SPL_BUILD
defined.

This avoids unnecessary code in U-Boot proper and allows further
refactoring and code-split between the SPL and U-Boot proper.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 arch/arm/mach-sunxi/Makefile | 2 +-
 arch/arm/mach-sunxi/clock.c  | 2 --
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 1d4c70ec352..3f83c0280ef 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -7,7 +7,6 @@
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
 obj-y	+= board.o
-obj-y	+= clock.o
 obj-y	+= cpu_info.o
 obj-y	+= dram_helpers.o
 obj-$(CONFIG_SUN6I_PRCM)	+= prcm.o
@@ -31,6 +30,7 @@ obj-y	+= timer.o
 endif
 
 ifdef CONFIG_SPL_BUILD
+obj-y				+= clock.o
 obj-$(CONFIG_MACH_SUNIV)	+= dram_suniv.o
 obj-$(CONFIG_DRAM_SUN4I)	+= dram_sun4i.o
 obj-$(CONFIG_DRAM_SUN6I)	+= dram_sun6i.o
diff --git a/arch/arm/mach-sunxi/clock.c b/arch/arm/mach-sunxi/clock.c
index b6c68c94f67..5e9fa0d0748 100644
--- a/arch/arm/mach-sunxi/clock.c
+++ b/arch/arm/mach-sunxi/clock.c
@@ -23,10 +23,8 @@ __weak void gtbus_init(void)
 
 int clock_init(void)
 {
-#ifdef CONFIG_SPL_BUILD
 	clock_init_safe();
 	gtbus_init();
-#endif
 	clock_init_uart();
 	clock_init_sec();
 
-- 
2.35.8