From: "Vadim Abrossimov" <vadim_abrossimov@yahoo.com>
To: Jeff Dike <jdike@addtoit.com>
Cc: User-mode-linux-devel@lists.sourceforge.net
Subject: Re: [uml-devel] Re: [PATCH] uml: support a separate build tree; support USER_OBJS dependencies
Date: Mon, 14 Feb 2005 00:11:16 +0100 [thread overview]
Message-ID: <opsl5r02lclfdzum@localhost.localdomain> (raw)
In-Reply-To: <200502132151.j1DLoxnW003492@ccure.user-mode-linux.org>
On Sun, 13 Feb 2005 16:50:59 -0500, Jeff Dike <jdike@addtoit.com> wrote:
>
> Yup, that would be useful.
>
Quite simple.
BTW, after application of all patches from your tarboll I got an error
compiling kernel-offsets.c.
I solve it adding the following dependency:
diff -rup 2.6.11-rc3.orig/arch/um/Makefile-i386
2.6.11-rc3/arch/um/Makefile-i386
--- 2.6.11-rc3.orig/arch/um/Makefile-i386 2005-02-13 23:31:35.116344504
+0100
+++ 2.6.11-rc3/arch/um/Makefile-i386 2005-02-13 23:11:31.344345664 +0100
@@ -36,6 +36,7 @@ CLEAN_FILES += $(ARCH_DIR)/user-offsets.
$(ARCH_DIR)/kernel-offsets.s: $(SUBARCH_CORE)/kernel-offsets.c \
$(ARCH_SYMLINKS) \
+ $(ARCH_DIR)/include/user_constants.h \
$(SYS_DIR)/sc.h \
include/asm include/linux/version.h \
include/config/MARKER
This is the patch for USER_OBJS:
---
diff -rup 2.6.11-rc3.orig/arch/um/drivers/Makefile
2.6.11-rc3/arch/um/drivers/Makefile
--- 2.6.11-rc3.orig/arch/um/drivers/Makefile 2005-02-13 23:31:34.754399528
+0100
+++ 2.6.11-rc3/arch/um/drivers/Makefile 2005-02-13 23:21:05.547053584 +0100
@@ -54,5 +54,4 @@ USER_OBJS := $(filter %_user.o,$(obj-y)
null.o pty.o tty.o xterm.o
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
-$(USER_OBJS) : %.o: %.c
- $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(CFLAGS_$(notdir $@))
$(USER_CFLAGS)
diff -rup 2.6.11-rc3.orig/arch/um/kernel/Makefile
2.6.11-rc3/arch/um/kernel/Makefile
--- 2.6.11-rc3.orig/arch/um/kernel/Makefile 2005-02-13 23:31:35.118344200
+0100
+++ 2.6.11-rc3/arch/um/kernel/Makefile 2005-02-13 23:21:43.820235176 +0100
@@ -29,8 +29,7 @@ USER_OBJS := $(foreach file,$(USER_OBJS)
CFLAGS_frame.o := -fno-omit-frame-pointer
-$(USER_OBJS) : %.o: %.c
- $(CC) $(USER_CFLAGS) $(CFLAGS_$(notdir $@)) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS)
$(CFLAGS_$(notdir $@))
targets += config.c
diff -rup 2.6.11-rc3.orig/arch/um/kernel/skas/Makefile
2.6.11-rc3/arch/um/kernel/skas/Makefile
--- 2.6.11-rc3.orig/arch/um/kernel/skas/Makefile 2005-02-13
23:30:36.017328920 +0100
+++ 2.6.11-rc3/arch/um/kernel/skas/Makefile 2005-02-13 23:22:10.380197448
+0100
@@ -9,7 +9,6 @@ obj-y := exec_kern.o mem.o mem_user.o mm
USER_OBJS = $(filter %_user.o,$(obj-y)) process.o time.o
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
-$(USER_OBJS) : %.o: %.c
- $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(CFLAGS_$(notdir $@))
$(USER_CFLAGS)
subdir- := util
diff -rup 2.6.11-rc3.orig/arch/um/kernel/tt/Makefile
2.6.11-rc3/arch/um/kernel/tt/Makefile
--- 2.6.11-rc3.orig/arch/um/kernel/tt/Makefile 2005-02-13
23:31:35.120343896 +0100
+++ 2.6.11-rc3/arch/um/kernel/tt/Makefile 2005-02-13 23:23:21.856331424
+0100
@@ -18,11 +18,9 @@ USER_OBJS := $(foreach file,$(USER_OBJS)
UNMAP_CFLAGS := $(patsubst -pg -DPROFILING,,$(USER_CFLAGS))
UNMAP_CFLAGS := $(patsubst -fprofile-arcs
-ftest-coverage,,$(UNMAP_CFLAGS))
-$(USER_OBJS) : %.o: %.c
- $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(CFLAGS_$(notdir $@))
$(USER_CFLAGS)
-$(obj)/unmap.o: $(src)/unmap.c
- $(CC) $(UNMAP_CFLAGS) -c -o $@ $<
+$(obj)/unmap.o: c_flags = -Wp,-MD,$(depfile) $(UNMAP_CFLAGS)
$(obj)/unmap_fin.o : $(obj)/unmap.o
$(LD) -r -o $(obj)/unmap_tmp.o $< $(shell $(CC) -print-file-name=libc.a)
diff -rup 2.6.11-rc3.orig/arch/um/kernel/tt/ptproxy/Makefile
2.6.11-rc3/arch/um/kernel/tt/ptproxy/Makefile
--- 2.6.11-rc3.orig/arch/um/kernel/tt/ptproxy/Makefile 2005-02-03
02:55:40.000000000 +0100
+++ 2.6.11-rc3/arch/um/kernel/tt/ptproxy/Makefile 2005-02-13
23:24:03.203045768 +0100
@@ -7,5 +7,4 @@ obj-y = proxy.o ptrace.o sysdep.o wait.o
USER_OBJS := $(foreach file,$(obj-y),$(src)/$(file))
-$(USER_OBJS) : %.o: %.c
- $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(CFLAGS_$(notdir $@))
$(USER_CFLAGS)
diff -rup 2.6.11-rc3.orig/arch/um/os-Linux/drivers/Makefile
2.6.11-rc3/arch/um/os-Linux/drivers/Makefile
--- 2.6.11-rc3.orig/arch/um/os-Linux/drivers/Makefile 2005-02-03
02:55:50.000000000 +0100
+++ 2.6.11-rc3/arch/um/os-Linux/drivers/Makefile 2005-02-13
23:24:56.239982928 +0100
@@ -15,5 +15,4 @@ USER_SINGLE_OBJS = $(foreach f,$(patsubs
USER_OBJS = $(filter %_user.o,$(obj-y) $(USER_SINGLE_OBJS))
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
-$(USER_OBJS) : %.o: %.c
- $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(CFLAGS_$(notdir $@))
$(USER_CFLAGS)
diff -rup 2.6.11-rc3.orig/arch/um/os-Linux/Makefile
2.6.11-rc3/arch/um/os-Linux/Makefile
--- 2.6.11-rc3.orig/arch/um/os-Linux/Makefile 2005-02-13
23:31:33.859535568 +0100
+++ 2.6.11-rc3/arch/um/os-Linux/Makefile 2005-02-13 23:24:35.699105616
+0100
@@ -10,7 +10,6 @@ USER_OBJS := aio.o elf_aux.o file.o mem.
time.o tt.o tty.o
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
-$(USER_OBJS) : %.o: %.c
- $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(CFLAGS_$(notdir $@))
$(USER_CFLAGS)
CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH)
diff -rup 2.6.11-rc3.orig/arch/um/sys-i386/Makefile
2.6.11-rc3/arch/um/sys-i386/Makefile
--- 2.6.11-rc3.orig/arch/um/sys-i386/Makefile 2005-02-13
23:31:35.120343896 +0100
+++ 2.6.11-rc3/arch/um/sys-i386/Makefile 2005-02-13 23:26:06.141356304
+0100
@@ -26,8 +26,7 @@ define make_link
ln -sf $(srctree)/arch/i386/$($(notdir $1)-dir)/$(notdir $1) $1
endef
-$(USER_OBJS) : %.o: %.c
- $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
+$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(CFLAGS_$(notdir $@))
$(USER_CFLAGS)
$(SYMLINKS):
$(call make_link,$@)
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
next prev parent reply other threads:[~2005-02-13 23:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <opsl43d9yilfdzum@localhost.localdomain>
[not found] ` <200502131813.j1DICsnW002251@ccure.user-mode-linux.org>
[not found] ` <20050213164652.GE8859@parcelfarce.linux.theplanet.co.uk>
2005-02-13 18:58 ` [uml-devel] Re: [PATCH] uml: support a separate build tree; support USER_OBJS dependencies Vadim Abrossimov
2005-02-13 21:50 ` Jeff Dike
2005-02-13 23:11 ` Vadim Abrossimov [this message]
2005-02-16 18:30 ` Blaisorblade
2005-02-19 10:55 ` Vadim Abrossimov
2005-02-24 16:31 ` Blaisorblade
2005-02-19 14:04 ` Vadim Abrossimov
2005-02-24 18:19 ` Blaisorblade
2005-02-14 1:13 ` Al Viro
2005-02-14 5:28 ` Vadim Abrossimov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=opsl5r02lclfdzum@localhost.localdomain \
--to=vadim_abrossimov@yahoo.com \
--cc=User-mode-linux-devel@lists.sourceforge.net \
--cc=jdike@addtoit.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox