From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Niklas Neronin <niklas.neronin@linux.intel.com>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 14/15] usb: xhci: allocate DCBAA based on host controller max slots
Date: Wed, 3 Jun 2026 12:11:31 +0300 [thread overview]
Message-ID: <20260603091132.1110849-15-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20260603091132.1110849-1-mathias.nyman@linux.intel.com>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
Allocate the Device Context Base Address Array (DCBAA) according to the
maximum number of device slots supported by the host controller, instead
of always allocating the absolute maximum of 255 entries.
The xHCI specification defines the DCBAA size as (MaxSlotsEnabled + 1)
entries. In the xhci driver there is currently no distinction between
MaxSlots and MaxSlotsEnabled, as all available slots are enabled during
initialization. As a result, 'max_slots' effectively represents both
values.
This change allows the xHCI driver to respect custom slot limits, reduces
unnecessary memory usage, and removes the obsolete "TODO" comment.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 6 +++---
drivers/usb/host/xhci-ring.c | 4 ++--
drivers/usb/host/xhci.h | 7 ++-----
3 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 019dac47c5d6..939151e5440e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1975,7 +1975,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
dcbaa = &xhci->dcbaa;
if (dcbaa->ctx_array) {
- dma_free_coherent(dev, array_size(sizeof(*dcbaa->ctx_array), MAX_HC_SLOTS),
+ dma_free_coherent(dev, array_size(sizeof(*dcbaa->ctx_array), xhci->max_slots + 1),
dcbaa->ctx_array, dcbaa->dma);
dcbaa->ctx_array = NULL;
}
@@ -2411,8 +2411,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Starting %s", __func__);
- dcbaa->ctx_array =
- dma_alloc_coherent(dev, array_size(sizeof(*dcbaa->ctx_array), MAX_HC_SLOTS),
+ xhci->dcbaa.ctx_array =
+ dma_alloc_coherent(dev, array_size(sizeof(*dcbaa->ctx_array), xhci->max_slots + 1),
&dcbaa->dma, flags);
if (!dcbaa->ctx_array)
goto fail;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3c304372bad3..4f98d8269625 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -609,7 +609,7 @@ static struct xhci_virt_ep *xhci_get_virt_ep(struct xhci_hcd *xhci,
unsigned int slot_id,
unsigned int ep_index)
{
- if (slot_id == 0 || slot_id >= MAX_HC_SLOTS) {
+ if (slot_id == 0 || slot_id > xhci->max_slots) {
xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
return NULL;
}
@@ -1804,7 +1804,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
struct xhci_command *cmd;
u32 cmd_type;
- if (slot_id >= MAX_HC_SLOTS) {
+ if (slot_id > xhci->max_slots) {
xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
return;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 9d57def08ea6..cb80acac97d4 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -792,7 +792,8 @@ struct xhci_tt_bw_info {
/**
* struct xhci_device_context_array
- * @ctx_array: Pointer to an array of addresses
+ * @ctx_array: Pointer to an array of addresses. The array size depends on Max
+ * Slots read from HCSPARAMS1.
* @dma: DMA address to @ctx_array
*
* Device Context Base Address Array (DCBAA) - Section 6.1.
@@ -803,10 +804,6 @@ struct xhci_device_context_array {
__le64 *ctx_array;
dma_addr_t dma;
};
-/*
- * TODO: change this to be dynamically sized at HC mem init time since the HC
- * might not be able to handle the maximum number of devices possible.
- */
struct xhci_transfer_event {
--
2.43.0
next prev parent reply other threads:[~2026-06-03 9:12 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-03 9:11 [PATCH 00/15] xhci features for usb-next Mathias Nyman
2026-06-03 9:11 ` [PATCH 01/15] usb: xhci: fix typo in xhci_set_port_power() comment Mathias Nyman
2026-06-03 9:11 ` [PATCH 02/15] usb: xhci: remove legacy 'num_trbs_free' tracking Mathias Nyman
2026-06-03 9:11 ` [PATCH 03/15] usb: xhci: Simplify xhci_quiesce() Mathias Nyman
2026-06-03 9:11 ` [PATCH 04/15] usb: xhci: Remove skip_isoc_td() Mathias Nyman
2026-06-03 9:11 ` [PATCH 05/15] usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling Mathias Nyman
2026-06-03 9:11 ` [PATCH 06/15] usb: xhci: Improve Soft Retries after short transfers Mathias Nyman
2026-06-03 9:11 ` [PATCH 07/15] xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states Mathias Nyman
2026-06-03 9:11 ` [PATCH 08/15] xhci: dbc: serialize enabling and disabling dbc Mathias Nyman
2026-06-15 6:11 ` Borah, Chaitanya Kumar
2026-06-15 8:47 ` Mathias Nyman
2026-06-15 8:55 ` [RFT PATCH] xhci: dbc: support runtime suspend while DbC is in enabled state Mathias Nyman
2026-06-15 12:14 ` Borah, Chaitanya Kumar
2026-06-03 9:11 ` [PATCH 09/15] xhci: dbc: add helper to set and clear DbC DCE enable bit Mathias Nyman
2026-06-03 9:11 ` [PATCH 10/15] xhci: dbc: add timestamps to DbC state changes in a new helper Mathias Nyman
2026-06-03 9:11 ` [PATCH 11/15] xhci: dbc: detect and recover hung DbC during enumeraton Mathias Nyman
2026-06-03 9:11 ` [PATCH 12/15] xhci: Prevent queuing new commands if xhci is inaccessible Mathias Nyman
2026-06-03 9:11 ` [PATCH 13/15] usb: xhci: refactor DCBAA struct Mathias Nyman
2026-06-03 9:11 ` Mathias Nyman [this message]
2026-06-03 9:11 ` [PATCH 15/15] usb: xhci: allocate internal DCBAA mirror dynamically Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260603091132.1110849-15-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=niklas.neronin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox