From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: sashiko-reviews@lists.linux.dev
Cc: linux-usb@vger.kernel.org
Subject: Re: [PATCH 05/18] thunderbolt: Re-apply Alpine/Titan Ridge flow on resume
Date: Fri, 20 Nov 2026 07:33:43 +0100 [thread overview]
Message-ID: <20261120063343.GF229695@black.igk.intel.com> (raw)
In-Reply-To: <sashiko-outbox-223706@kernel.org>
Hi,
On Thu, Nov 19, 2026 at 05:35:54PM +0000, sashiko-bot@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential
> issue to consider:
> - [Medium] thunderbolt: missing tb_pci_post_activate() in
> tb_runtime_resume()
> --
>
> commit 087ef2024705f5c81e4d876d241a868e52e4e3b5
> Author: Mika Westerberg (Intel) <westeri@kernel.org>
>
> thunderbolt: Re-apply Alpine/Titan Ridge flow on resume
>
> This commit extracts the PCIe L1 enable and xHCI connect steps into
> tb_pci_post_activate() and calls it when re-activating PCIe tunnels in
> tb_resume_noirq().
>
> > diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
> > index 3c4903adb687d..6a11d686bdf14 100644
> > --- a/drivers/thunderbolt/tb.c
> > +++ b/drivers/thunderbolt/tb.c
> > @@ -2315,6 +2315,21 @@ static int tb_disconnect_pci(struct tb *tb, struct tb_switch *sw)
> > return 0;
> > }
> >
> > +static void tb_pci_post_activate(struct tb_tunnel *tunnel)
> > +{
> > + struct tb_switch *sw = tunnel->dst_port->sw;
> > +
> > + /*
> > + * PCIe L1 is needed to enable CL0s for Titan Ridge so enable it
> > + * here.
> > + */
> > + if (tb_switch_pcie_l1_enable(sw))
> > + tb_sw_warn(sw, "failed to enable PCIe L1 for Titan Ridge\n");
> > +
> > + if (tb_switch_xhci_connect(sw))
> > + tb_sw_warn(sw, "failed to connect xHCI\n");
> > +}
>
> [ ... ]
>
> > @@ -3239,6 +3246,8 @@ static int tb_resume_noirq(struct tb *tb)
> > usb3_delay = 0;
> > }
> > tb_tunnel_activate(tunnel);
> > + if (tb_tunnel_is_pci(tunnel))
> > + tb_pci_post_activate(tunnel);
> > }
>
> [Severity: Medium]
> Should tb_runtime_resume() also call tb_pci_post_activate() when it
> re-activates PCIe tunnels?
No actually. This is only needed for suspend to disk where we reset the
topology (but there is no harm calling it unconditionally in
tb_resume_noirq(()). LC keeps this over RTD3.
next prev parent reply other threads:[~2026-11-20 6:33 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 17:12 [PATCH 00/18] thunderbolt: Add support for shared buffering Mika Westerberg
2026-11-19 17:12 ` [PATCH 01/18] thunderbolt: Avoid leaking of DMA tunnel after XDomain removal Mika Westerberg
2026-11-19 17:32 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 02/18] thunderbolt: Tear down DMA tunnels on every " Mika Westerberg
2026-11-19 17:34 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 03/18] thunderbolt: Delay re-pairing DP IN/OUT if DPRX negotiation fails Mika Westerberg
2026-11-19 17:26 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 04/18] thunderbolt: Call DP tunnel activation callback with tb->lock held Mika Westerberg
2026-11-19 17:28 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 05/18] thunderbolt: Re-apply Alpine/Titan Ridge flow on resume Mika Westerberg
2026-11-19 17:35 ` sashiko-bot
2026-11-20 6:33 ` Mika Westerberg [this message]
2026-11-19 17:12 ` [PATCH 06/18] thunderbolt: Return -ESHUTDOWN when control channel is not running Mika Westerberg
2026-11-19 17:25 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 07/18] thunderbolt: Add usb4_port_hotplug_disable() Mika Westerberg
2026-11-19 17:22 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 08/18] thunderbolt: Move tb_plug_events_active() before tb_switch_reset_host() Mika Westerberg
2026-11-19 17:25 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 09/18] thunderbolt: Add tb_port_state_is_up() Mika Westerberg
2026-11-19 17:22 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 10/18] thunderbolt: Split host router port reset into a separate function Mika Westerberg
2026-11-19 17:22 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 11/18] thunderbolt: Reset topology after suspend-to-disk Mika Westerberg
2026-11-19 17:44 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 12/18] thunderbolt: Drop tunnel discovery without HopID allocation Mika Westerberg
2026-11-19 17:26 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 13/18] thunderbolt: Always take domain lock when tb_tunnel_put() is called Mika Westerberg
2026-11-19 17:34 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 14/18] thunderbolt: Assign domain to the routers in KUnit tests Mika Westerberg
2026-11-19 17:26 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 15/18] thunderbolt: Rework tunnel credit allocation Mika Westerberg
2026-11-19 17:43 ` sashiko-bot
2026-11-20 6:54 ` Mika Westerberg
2026-11-19 17:12 ` [PATCH 16/18] thunderbolt: Add support for shared flow control Mika Westerberg
2026-11-19 17:34 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 17/18] thunderbolt: Use restricted shared flow control for DMA tunnels on intra-domain links Mika Westerberg
2026-11-19 17:32 ` sashiko-bot
2026-11-19 17:12 ` [PATCH 18/18] thunderbolt: Add KUnit tests for shared buffering Mika Westerberg
2026-11-19 17:28 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120063343.GF229695@black.igk.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox