[Bug 218943] No SuperSpeedPlus on AM4/5 Hubs

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=218943

--- Comment #16 from Jarrard (jarrard@proton.me) ---
I(In reply to Jarrard from comment #15)
> [  668.628381] usb 3-4: new high-speed USB device number 4 using xhci_hcd
> [  668.755970] usb 3-4: New USB device found, idVendor=1a40, idProduct=0101,
> bcdDevice= 1.11
> [  668.755978] usb 3-4: New USB device strings: Mfr=0, Product=1,
> SerialNumber=0
> [  668.755983] usb 3-4: Product: USB 2.0 Hub
> [  668.818075] hub 3-4:1.0: USB hub found
> [  668.818344] hub 3-4:1.0: 4 ports detected
> [  669.113942] usb 4-4: new SuperSpeed USB device number 5 using xhci_hcd
> [  674.233892] usb 4-4: unable to get BOS descriptor or descriptor too short
> [  674.258279] usb 4-4: unable to read config index 0 descriptor/start: -71
> [  674.258288] usb 4-4: can't read configurations, error -71
> [  674.409839] usb 3-4.3: new full-speed USB device number 5 using xhci_hcd
> [  674.628846] usb 3-4.3: New USB device found, idVendor=07ca,
> idProduct=d553, bcdDevice= 1.01
> [  674.628853] usb 3-4.3: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [  674.628858] usb 3-4.3: Product: Live Gamer Ultra 2.1-RGB
> [  674.628862] usb 3-4.3: Manufacturer: AVerMedia Computer Inc.
> [  674.628866] usb 3-4.3: SerialNumber: 5204140800332
> [  674.683236] hid-generic 0003:07CA:D553.000B: hiddev5,hidraw10: USB HID
> v1.11 Device [AVerMedia Computer Inc. Live Gamer Ultra 2.1-RGB] on
> usb-0000:30:00.3-4.3/input1
> [  675.205949] usb 4-4: Device not responding to setup address.
> [  675.418073] usb 4-4: Device not responding to setup address.
> [  675.625936] usb 4-4: device not accepting address 6, error -71
> [  675.634016] usb usb4-port4: attempt power cycle
> [  676.742634] usb 4-4: new SuperSpeed USB device number 7 using xhci_hcd
> [  676.950771] usb 4-4: LPM exit latency is zeroed, disabling LPM.
> [  677.048948] usb 4-4: New USB device found, idVendor=07ca, idProduct=2553,
> bcdDevice= 1.00
> [  677.048957] usb 4-4: New USB device strings: Mfr=6, Product=7,
> SerialNumber=3
> [  677.048962] usb 4-4: Product: Live Gamer Ultra 2.1
> [  677.048966] usb 4-4: Manufacturer: AVerMedia
> [  677.048970] usb 4-4: SerialNumber: 5204140800332
> [  677.147762] uvcvideo 4-4:1.1: Unknown video format
> 30313050-0000-0010-8000-00aa00389b71
> [  677.147779] usb 4-4: Found UVC 1.00 device Live Gamer Ultra 2.1
> (07ca:2553)
> [  677.547565] usb 4-4: 3:2: failed to get current value for ch 0 (-22)
> 
> 
> 
> 
> 
> Nothing about superspeedplus sorry to day.  I don't understand the
> descriptor and can't debug further as dynamic debug is not allowed under
> this distro atm.

Interesting enough dynamic debug is compiled in with this release of kernel for
kubuntu but it spits a permission denied with any of those cat commands.  I
don't really understand the issue. 

Pretty sure I was able to do them under Arch so maybe I should go back to that
instead of using kubuntu. For some reason I find Arch simpler, lol

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.