From: Guenter Roeck <linux@roeck-us.net>
To: Radu Rendec <rrendec@arista.com>
Cc: Wim Van Sebroeck <wim@iguana.be>, linux-watchdog@vger.kernel.org
Subject: Re: [v2,1/2] watchdog: xen_wdt: use the watchdog subsystem
Date: Sat, 11 Nov 2017 08:40:58 -0800 [thread overview]
Message-ID: <20171111164058.GA11701@roeck-us.net> (raw)
In-Reply-To: <20171106190412.10023-2-rrendec@arista.com>
On Mon, Nov 06, 2017 at 07:04:11PM +0000, Radu Rendec wrote:
> Change the xen_wdt driver to use the watchdog subsystem instead of
> registering and manipulating the char device directly through the misc
> API. This is mainly getting rid of the "write" and "ioctl" methods and
> part of the watchdog control logic (which are all implemented by the
> watchdog subsystem).
>
> Even though the watchdog subsystem supports registering and handling
> multiple watchdog devices at the same time, the xen_wdt driver has an
> inherent limitation of only one device due to the way the Xen hypervisor
> exposes watchdog functionality. However, the driver can now coexist with
> other watchdog devices (supported by different drivers).
>
> Signed-off-by: Radu Rendec <rrendec@arista.com>
I just noticed this escaped my attention, possibly because it was sent
as reply to v1. Doesn't it say samewhere that you should not do that ?
> ---
> drivers/watchdog/xen_wdt.c | 239 ++++++++++-----------------------------------
> 1 file changed, 49 insertions(+), 190 deletions(-)
>
> diff --git a/drivers/watchdog/xen_wdt.c b/drivers/watchdog/xen_wdt.c
> index 5dd5c3494d55..5513047b70c9 100644
> --- a/drivers/watchdog/xen_wdt.c
> +++ b/drivers/watchdog/xen_wdt.c
[ ... ]
> -static int xen_wdt_probe(struct platform_device *dev)
> +static int xen_wdt_probe(struct platform_device *pdev)
> {
> struct sched_watchdog wd = { .id = ~0 };
> int ret = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wd);
>
> - switch (ret) {
> - case -EINVAL:
> - if (!timeout) {
> - timeout = WATCHDOG_TIMEOUT;
> - pr_info("timeout value invalid, using %d\n", timeout);
> - }
> -
> - ret = misc_register(&xen_wdt_miscdev);
> - if (ret) {
> - pr_err("cannot register miscdev on minor=%d (%d)\n",
> - WATCHDOG_MINOR, ret);
> - break;
> - }
> -
> - pr_info("initialized (timeout=%ds, nowayout=%d)\n",
> - timeout, nowayout);
> - break;
> -
> - case -ENOSYS:
> - pr_info("not supported\n");
> - ret = -ENODEV;
> - break;
> -
> - default:
> - pr_info("bogus return value %d\n", ret);
> - break;
> + if (ret == -ENOSYS) {
> + pr_err("watchdog not supported by hypervisor\n");
> + return -ENODEV;
> }
>
> - return ret;
> -}
> + if (ret != -EINVAL) {
> + pr_err("unexpected hypervisor error (%d)\n", ret);
> + return -ENODEV;
> + }
>
> -static int xen_wdt_remove(struct platform_device *dev)
> -{
> - /* Stop the timer before we leave */
> - if (!nowayout)
> - xen_wdt_stop();
> + if (watchdog_init_timeout(&xen_wdt_dev, timeout, NULL))
> + pr_info("timeout value invalid, using %d\n",
> + xen_wdt_dev.timeout);
dev_info has that odd "wdt: " header because DRV_NAME is set to "wdt",
which doesn't really make much sense. Please use something more sensible
for DRV_NAME and use dev_info.
Guenter
next prev parent reply other threads:[~2017-11-11 16:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-03 15:31 [PATCH 0/2] xen_wdt: use the watchdog subsystem Radu Rendec
2017-11-03 15:31 ` [PATCH 1/2] watchdog: " Radu Rendec
2017-11-05 15:35 ` [1/2] " Guenter Roeck
2017-11-03 15:31 ` [PATCH 2/2] watchdog: xen_wdt: remove info message and version number Radu Rendec
2017-11-05 15:39 ` [2/2] " Guenter Roeck
2017-11-06 17:39 ` Radu Rendec
2017-11-06 18:04 ` Guenter Roeck
2017-11-06 19:04 ` [PATCH v2 0/2] xen_wdt: use the watchdog subsystem Radu Rendec
2017-11-06 19:04 ` [PATCH v2 1/2] watchdog: " Radu Rendec
2017-11-11 16:40 ` Guenter Roeck [this message]
2017-11-14 15:05 ` [v2,1/2] " Radu Rendec
2017-11-06 19:04 ` [PATCH v2 2/2] watchdog: xen_wdt: remove info message and version number Radu Rendec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171111164058.GA11701@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-watchdog@vger.kernel.org \
--cc=rrendec@arista.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox