From: Ron Rindjunsky <ron.rindjunsky@intel.com>
To: linville@tuxdriver.com
Cc: johannes@sipsolutions.net, linux-wireless@vger.kernel.org,
flamingice@sourmilk.net, tomas.winkler@intel.com,
yi.zhu@intel.com, Ron Rindjunsky <ron.rindjunsky@intel.com>
Subject: [PATCH 2/8] mac80211: A-MPDU Rx add MLME structures
Date: Mon, 17 Dec 2007 17:57:43 +0200 [thread overview]
Message-ID: <11979070782201-git-send-email-ron.rindjunsky@intel.com> (raw)
In-Reply-To: <11979070692599-git-send-email-ron.rindjunsky@intel.com>
This patch adds the needed structures to describe the Rx aggregation MLME per STA
new:
- struct tid_ampdu_rx: TID aggregation information (Rx)
- struct sta_ampdu_mlme: MLME aggregation information for STA
changed:
- struct sta_info: ampdu_mlme added to describe A-MPDU MLME per STA,
and timer_to_tid added to map timer id into TID
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
---
net/mac80211/sta_info.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 47 insertions(+), 0 deletions(-)
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index e1a4ac1..451b761 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -31,6 +31,51 @@
#define WLAN_STA_WME BIT(9)
#define WLAN_STA_WDS BIT(27)
+#define STA_TID_NUM 16
+#define ADDBA_RESP_INTERVAL HZ
+
+#define HT_AGG_STATE_INITIATOR_SHIFT (4)
+
+#define HT_AGG_STATE_REQ_STOP_BA_MSK BIT(3)
+
+#define HT_AGG_STATE_IDLE (0x0)
+#define HT_AGG_STATE_OPERATIONAL (0x7)
+
+/**
+ * struct tid_ampdu_rx - TID aggregation information (Rx).
+ *
+ * @state: TID's state in session state machine.
+ * @dialog_token: dialog token for aggregation session
+ * @ssn: Starting Sequence Number expected to be aggregated.
+ * @buf_size: buffer size for incoming A-MPDUs
+ * @timeout: reset timer value.
+ * @head_seq_num: head sequence number in reordering buffer.
+ * @stored_mpdu_num: number of MPDUs in reordering buffer
+ * @reorder_buf: buffer to reorder incoming aggregated MPDUs
+ * @session_timer: check if peer keeps Tx-ing on the TID (by timeout value)
+ */
+struct tid_ampdu_rx {
+ u8 state;
+ u8 dialog_token;
+ u16 ssn;
+ u16 buf_size;
+ u16 timeout;
+ u16 head_seq_num;
+ u16 stored_mpdu_num;
+ struct sk_buff **reorder_buf;
+ struct timer_list session_timer;
+};
+
+/**
+ * struct sta_ampdu_mlme - STA aggregation information.
+ *
+ * @tid_agg_info_rx: aggregation info for Rx per TID
+ * @ampdu_rx: for locking sections in aggregation Rx flow
+ */
+struct sta_ampdu_mlme {
+ struct tid_ampdu_rx tid_rx[STA_TID_NUM];
+ spinlock_t ampdu_rx;
+};
struct sta_info {
struct kref kref;
@@ -101,6 +146,8 @@ struct sta_info {
struct ieee80211_ht_info ht_info; /* 802.11n HT capabilities
of this STA */
+ struct sta_ampdu_mlme ampdu_mlme;
+ int timer_to_tid[STA_TID_NUM]; /* convert timer id to tid */
#ifdef CONFIG_MAC80211_DEBUGFS
struct sta_info_debugfsdentries {
--
1.5.3.3
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
next prev parent reply other threads:[~2007-12-17 16:13 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-17 15:57 [PATCH 0/8] mac80211/iwlwifi: integrate IEEE802.11n A-MPDU Rx MLME Ron Rindjunsky
2007-12-17 15:57 ` [PATCH 1/8] mac80211: A-MPDU Rx add low level driver API Ron Rindjunsky
2007-12-17 17:54 ` Johannes Berg
2007-12-17 22:38 ` Johannes Berg
2007-12-18 13:41 ` Ron Rindjunsky
2007-12-18 14:01 ` Johannes Berg
2007-12-17 15:57 ` Ron Rindjunsky [this message]
2007-12-17 18:08 ` [PATCH 2/8] mac80211: A-MPDU Rx add MLME structures Johannes Berg
2007-12-18 13:41 ` Ron Rindjunsky
2007-12-18 13:59 ` Johannes Berg
2007-12-18 21:18 ` Johannes Berg
2007-12-19 18:59 ` Rindjunsky, Ron
2007-12-17 15:57 ` [PATCH 3/8] mac80211: A-MPDU Rx adding basic functionality Ron Rindjunsky
2007-12-17 18:06 ` Johannes Berg
2007-12-18 13:42 ` Ron Rindjunsky
2007-12-17 15:57 ` [PATCH 4/8] mac80211: A-MPDU Rx MLME data initialization Ron Rindjunsky
2007-12-17 18:09 ` Johannes Berg
2007-12-18 13:43 ` Ron Rindjunsky
2007-12-17 15:57 ` [PATCH 5/8] mac80211: A-MPDU Rx handling aggregation reordering Ron Rindjunsky
2007-12-17 18:18 ` Johannes Berg
2007-12-18 13:44 ` Ron Rindjunsky
2007-12-18 13:57 ` Johannes Berg
2007-12-19 10:57 ` Rindjunsky, Ron
2007-12-19 15:47 ` Johannes Berg
2007-12-19 16:29 ` Winkler, Tomas
2007-12-19 16:36 ` Johannes Berg
2007-12-20 10:14 ` Johannes Berg
2007-12-20 12:32 ` Ron Rindjunsky
2007-12-20 12:41 ` Johannes Berg
2007-12-20 14:15 ` Ron Rindjunsky
2007-12-23 16:15 ` Ron Rindjunsky
2007-12-23 17:28 ` Johannes Berg
2007-12-23 17:38 ` Ron Rindjunsky
2007-12-23 18:15 ` Johannes Berg
2007-12-17 15:57 ` [PATCH 6/8] mac80211: A-MPDU Rx adding BAR handling capability Ron Rindjunsky
2007-12-17 18:24 ` Johannes Berg
2007-12-18 13:45 ` Ron Rindjunsky
2007-12-18 13:53 ` Johannes Berg
2007-12-19 13:25 ` Rindjunsky, Ron
2007-12-19 15:45 ` Johannes Berg
2007-12-19 18:59 ` Rindjunsky, Ron
2007-12-17 15:57 ` [PATCH 7/8] mac80211: A-MPDU Rx handling DELBA requests Ron Rindjunsky
2007-12-17 18:26 ` Johannes Berg
2007-12-18 13:46 ` Ron Rindjunsky
2007-12-18 13:51 ` Johannes Berg
2007-12-19 13:22 ` Rindjunsky, Ron
2007-12-17 15:57 ` [PATCH 8/8] iwlwifi: A-MPDU Rx flow enabled Ron Rindjunsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11979070782201-git-send-email-ron.rindjunsky@intel.com \
--to=ron.rindjunsky@intel.com \
--cc=flamingice@sourmilk.net \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=tomas.winkler@intel.com \
--cc=yi.zhu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox