From: Ron Rindjunsky <ron.rindjunsky@intel.com>
To: linville@tuxdriver.com
Cc: johannes@sipsolutions.net, linux-wireless@vger.kernel.org,
flamingice@sourmilk.net, tomas.winkler@intel.com,
yi.zhu@intel.com, Ron Rindjunsky <ron.rindjunsky@intel.com>
Subject: [PATCH 1/8] mac80211: A-MPDU Rx add low level driver API
Date: Mon, 17 Dec 2007 17:57:42 +0200 [thread overview]
Message-ID: <1197907078132-git-send-email-ron.rindjunsky@intel.com> (raw)
In-Reply-To: <11979070692599-git-send-email-ron.rindjunsky@intel.com>
This patch adds the API to perform A-MPDU actions between mac80211 and low
level driver.
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
---
include/net/mac80211.h | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0d67b33..f50c28a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -915,6 +915,18 @@ enum ieee80211_erp_change_flags {
IEEE80211_ERP_CHANGE_PREAMBLE = 1<<1,
};
+/**
+ * enum ieee80211_ampdu_mlme_flags - A-MPDU action flags
+ *
+ * These flags are used with the ampdu_action() callback in
+ * &struct ieee80211_ops to indicate which action is needed.
+ * @IEEE80211_AMPDU_RX_START: start Rx aggregation
+ * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
+ */
+enum ieee80211_ampdu_mlme_flags {
+ IEEE80211_AMPDU_RX_START = 1<<0,
+ IEEE80211_AMPDU_RX_STOP = 1<<1,
+};
/**
* struct ieee80211_ops - callbacks from mac80211 to the driver
@@ -1043,6 +1055,12 @@ enum ieee80211_erp_change_flags {
* used to determine whether to reply to Probe Requests.
*
* @conf_ht: Configures low level driver with 802.11n HT data. Must be atomic.
+ *
+ * @ampdu_action: Ask low-level driver to perform a certain A-MPDU action
+ * The RA/TID combination determines the destination and TID we want
+ * the ampdu action to be perfoemed for. The action is defined through
+ * ieee80211_ampdu_mlme_flags. starting sequence number (ssn)
+ * is the first frame we expect to perform the action on.
*/
struct ieee80211_ops {
int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
@@ -1089,6 +1107,8 @@ struct ieee80211_ops {
struct ieee80211_tx_control *control);
int (*tx_last_beacon)(struct ieee80211_hw *hw);
int (*conf_ht)(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
+ int (*ampdu_action)(struct ieee80211_hw *hw, u8 action, const u8 *ra,
+ u16 tid, u16 ssn);
};
/**
--
1.5.3.3
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
next prev parent reply other threads:[~2007-12-17 16:13 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-17 15:57 [PATCH 0/8] mac80211/iwlwifi: integrate IEEE802.11n A-MPDU Rx MLME Ron Rindjunsky
2007-12-17 15:57 ` Ron Rindjunsky [this message]
2007-12-17 17:54 ` [PATCH 1/8] mac80211: A-MPDU Rx add low level driver API Johannes Berg
2007-12-17 22:38 ` Johannes Berg
2007-12-18 13:41 ` Ron Rindjunsky
2007-12-18 14:01 ` Johannes Berg
2007-12-17 15:57 ` [PATCH 2/8] mac80211: A-MPDU Rx add MLME structures Ron Rindjunsky
2007-12-17 18:08 ` Johannes Berg
2007-12-18 13:41 ` Ron Rindjunsky
2007-12-18 13:59 ` Johannes Berg
2007-12-18 21:18 ` Johannes Berg
2007-12-19 18:59 ` Rindjunsky, Ron
2007-12-17 15:57 ` [PATCH 3/8] mac80211: A-MPDU Rx adding basic functionality Ron Rindjunsky
2007-12-17 18:06 ` Johannes Berg
2007-12-18 13:42 ` Ron Rindjunsky
2007-12-17 15:57 ` [PATCH 4/8] mac80211: A-MPDU Rx MLME data initialization Ron Rindjunsky
2007-12-17 18:09 ` Johannes Berg
2007-12-18 13:43 ` Ron Rindjunsky
2007-12-17 15:57 ` [PATCH 5/8] mac80211: A-MPDU Rx handling aggregation reordering Ron Rindjunsky
2007-12-17 18:18 ` Johannes Berg
2007-12-18 13:44 ` Ron Rindjunsky
2007-12-18 13:57 ` Johannes Berg
2007-12-19 10:57 ` Rindjunsky, Ron
2007-12-19 15:47 ` Johannes Berg
2007-12-19 16:29 ` Winkler, Tomas
2007-12-19 16:36 ` Johannes Berg
2007-12-20 10:14 ` Johannes Berg
2007-12-20 12:32 ` Ron Rindjunsky
2007-12-20 12:41 ` Johannes Berg
2007-12-20 14:15 ` Ron Rindjunsky
2007-12-23 16:15 ` Ron Rindjunsky
2007-12-23 17:28 ` Johannes Berg
2007-12-23 17:38 ` Ron Rindjunsky
2007-12-23 18:15 ` Johannes Berg
2007-12-17 15:57 ` [PATCH 6/8] mac80211: A-MPDU Rx adding BAR handling capability Ron Rindjunsky
2007-12-17 18:24 ` Johannes Berg
2007-12-18 13:45 ` Ron Rindjunsky
2007-12-18 13:53 ` Johannes Berg
2007-12-19 13:25 ` Rindjunsky, Ron
2007-12-19 15:45 ` Johannes Berg
2007-12-19 18:59 ` Rindjunsky, Ron
2007-12-17 15:57 ` [PATCH 7/8] mac80211: A-MPDU Rx handling DELBA requests Ron Rindjunsky
2007-12-17 18:26 ` Johannes Berg
2007-12-18 13:46 ` Ron Rindjunsky
2007-12-18 13:51 ` Johannes Berg
2007-12-19 13:22 ` Rindjunsky, Ron
2007-12-17 15:57 ` [PATCH 8/8] iwlwifi: A-MPDU Rx flow enabled Ron Rindjunsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1197907078132-git-send-email-ron.rindjunsky@intel.com \
--to=ron.rindjunsky@intel.com \
--cc=flamingice@sourmilk.net \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=tomas.winkler@intel.com \
--cc=yi.zhu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox