From: Ron Rindjunsky <ron.rindjunsky@intel.com>
To: linville@tuxdriver.com
Cc: johannes@sipsolutions.net, linux-wireless@vger.kernel.org,
flamingice@sourmilk.net, tomas.winkler@intel.com,
yi.zhu@intel.com, Ron Rindjunsky <ron.rindjunsky@intel.com>
Subject: [PATCH 11/12] iwlwifi: A-MPDU Tx conform block Ack rate scaling to mac80211
Date: Mon, 21 Jan 2008 13:52:11 +0200 [thread overview]
Message-ID: <1200916340844-git-send-email-ron.rindjunsky@intel.com> (raw)
In-Reply-To: <12009163321727-git-send-email-ron.rindjunsky@intel.com>
This patch uses the changes in ieee80211_tx_status to pass Block Ack data
to rate scaling module, and uses this data in rate scaling calculations
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
---
drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 85 +++++++++++++++++++---------
drivers/net/wireless/iwlwifi/iwl-4965.c | 9 +--
2 files changed, 60 insertions(+), 34 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
index d064622..f4f2497 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
@@ -277,7 +277,8 @@ static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window)
* packets.
*/
static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows,
- int scale_index, s32 tpt, u32 status)
+ int scale_index, s32 tpt, int retries,
+ int successes)
{
struct iwl4965_rate_scale_data *window = NULL;
u64 mask;
@@ -298,26 +299,33 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows,
* subtract "1" from the success counter (this is the main reason
* we keep these bitmaps!).
*/
- if (window->counter >= win_size) {
- window->counter = win_size - 1;
- mask = 1;
- mask = (mask << (win_size - 1));
- if ((window->data & mask)) {
- window->data &= ~mask;
- window->success_counter = window->success_counter - 1;
+ while (retries > 0) {
+ if (window->counter >= win_size) {
+ window->counter = win_size - 1;
+ mask = 1;
+ mask = (mask << (win_size - 1));
+ if (window->data & mask) {
+ window->data &= ~mask;
+ window->success_counter =
+ window->success_counter - 1;
+ }
}
- }
- /* Increment frames-attempted counter */
- window->counter = window->counter + 1;
+ /* Increment frames-attempted counter */
+ window->counter++;
+
+ /* Shift bitmap by one frame (throw away oldest history),
+ * OR in "1", and increment "success" if this
+ * frame was successful. */
+ mask = window->data;
+ window->data = (mask << 1);
+ if (successes > 0) {
+ window->success_counter = window->success_counter + 1;
+ window->data |= 0x1;
+ successes--;
+ }
- /* Shift bitmap by one frame (throw away oldest history),
- * OR in "1", and increment "success" if this frame was successful. */
- mask = window->data;
- window->data = (mask << 1);
- if (status != 0) {
- window->success_counter = window->success_counter + 1;
- window->data |= 0x1;
+ retries--;
}
/* Calculate current success ratio, avoid divide-by-0! */
@@ -677,6 +685,11 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
if (!ieee80211_is_data(fc) || is_multicast_ether_addr(hdr->addr1))
return;
+ /* This packet was aggregated but doesn't carry rate scale info */
+ if ((tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) &&
+ !(tx_resp->flags & IEEE80211_TX_STATUS_AMPDU))
+ return;
+
retries = tx_resp->retry_count;
if (retries > 15)
@@ -766,7 +779,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
tpt = search_tbl->expected_tpt[rs_index];
else
tpt = 0;
- rs_collect_tx_data(search_win, rs_index, tpt, 0);
+ rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
/* Else if type matches "current/active" table,
* add failure to "current/active" history */
@@ -777,7 +790,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
tpt = curr_tbl->expected_tpt[rs_index];
else
tpt = 0;
- rs_collect_tx_data(window, rs_index, tpt, 0);
+ rs_collect_tx_data(window, rs_index, tpt, 1, 0);
}
/* If not searching for a new mode, increment failed counter
@@ -818,9 +831,13 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
tpt = search_tbl->expected_tpt[rs_index];
else
tpt = 0;
- rs_collect_tx_data(search_win,
- rs_index, tpt, status);
-
+ if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU)
+ rs_collect_tx_data(search_win, rs_index, tpt,
+ tx_resp->ampdu_ack_len,
+ tx_resp->ampdu_ack_map);
+ else
+ rs_collect_tx_data(search_win, rs_index, tpt,
+ 1, status);
/* Else if type matches "current/active" table,
* add final tx status to "current/active" history */
} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
@@ -830,16 +847,28 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev,
tpt = curr_tbl->expected_tpt[rs_index];
else
tpt = 0;
- rs_collect_tx_data(window, rs_index, tpt, status);
+ if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU)
+ rs_collect_tx_data(window, rs_index, tpt,
+ tx_resp->ampdu_ack_len,
+ tx_resp->ampdu_ack_map);
+ else
+ rs_collect_tx_data(window, rs_index, tpt,
+ 1, status);
}
/* If not searching for new mode, increment success/failed counter
* ... these help determine when to start searching again */
if (lq_sta->stay_in_tbl) {
- if (status)
- lq_sta->total_success++;
- else
- lq_sta->total_failed++;
+ if (tx_resp->control.flags & IEEE80211_TXCTL_AMPDU) {
+ lq_sta->total_success += tx_resp->ampdu_ack_map;
+ lq_sta->total_failed +=
+ (tx_resp->ampdu_ack_len - tx_resp->ampdu_ack_map);
+ } else {
+ if (status)
+ lq_sta->total_success++;
+ else
+ lq_sta->total_failed++;
+ }
}
/* See if there's a better rate or modulation mode to try. */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index d626130..3fd4b44 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -4286,12 +4286,9 @@ static int iwl4965_tx_status_reply_compressed_ba(struct iwl4965_priv *priv,
tx_status = &priv->txq[scd_flow].txb[agg->start_idx].status;
tx_status->flags = IEEE80211_TX_STATUS_ACK;
- tx_status->retry_count++;
-#ifdef CONFIG_IWL4965_HT_AGG
- tx_status->flags |= IEEE80211_TX_STATUS_AGG_STATS;
- tx_status->successes = successes;
- tx_status->frame_count = agg->frame_count;
-#endif /* CONFIG_IWL4965_HT_AGG */
+ tx_status->flags |= IEEE80211_TX_STATUS_AMPDU;
+ tx_status->ampdu_ack_map = successes;
+ tx_status->ampdu_ack_len = agg->frame_count;
tx_status->control.tx_rate = agg->rate_n_flags;
IWL_DEBUG_TX_REPLY("Bitmap %llx\n", bitmap);
--
1.5.3.7
---------------------------------------------------------------------
Intel Israel (74) Limited
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
next prev parent reply other threads:[~2008-01-21 11:52 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-21 11:52 [PATCH 0/12] mac80211/iwlwifi: A-MPDU Tx support Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 01/12] mac80211: A-MPDU Tx add session's and low level driver's API Ron Rindjunsky
2008-01-24 9:23 ` Johannes Berg
2008-01-27 17:24 ` Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 02/12] mac80211: A-MPDU Tx add MLME structures Ron Rindjunsky
2008-01-24 9:29 ` Johannes Berg
2008-01-27 17:25 ` Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 03/12] mac80211: A-MPDU Tx adding basic functionality Ron Rindjunsky
2008-01-24 9:30 ` Johannes Berg
2008-01-27 17:25 ` Ron Rindjunsky
2008-01-24 9:34 ` Johannes Berg
2008-01-27 17:25 ` Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 04/12] mac80211: A-MPDU Tx MLME data initialization Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 05/12] mac80211: A-MPDU add debugfs support Ron Rindjunsky
2008-01-24 9:45 ` Johannes Berg
2008-01-21 11:52 ` [PATCH 06/12] mac80211: A-MPDU Tx adding qdisc support Ron Rindjunsky
2008-01-24 9:42 ` Johannes Berg
2008-01-27 17:26 ` Ron Rindjunsky
2008-01-29 16:12 ` Johannes Berg
2008-01-30 9:11 ` Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 07/12] mac80211: A-MPDU Tx change tx_status to support Block Ack data Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 08/12] mac80211: A-MPDU Tx add delBA from recipient support Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 09/12] iwlwifi: A-MPDU Tx conform API to mac80211 Ron Rindjunsky
2008-01-21 11:52 ` [PATCH 10/12] iwlwifi: A-MPDU Tx conform flows " Ron Rindjunsky
2008-01-21 11:52 ` Ron Rindjunsky [this message]
2008-01-21 11:52 ` [PATCH 12/12] wlwifi: A-MPDU Tx activation by load measures Ron Rindjunsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1200916340844-git-send-email-ron.rindjunsky@intel.com \
--to=ron.rindjunsky@intel.com \
--cc=flamingice@sourmilk.net \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=tomas.winkler@intel.com \
--cc=yi.zhu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox