* Re: [possible BUG] PM suspend warning in 2.6.29-rc3-00227-gf1dd849
[not found] ` <200902012208.40758.rjw@sisk.pl>
@ 2009-02-02 14:14 ` Ming Lei
2009-02-02 18:49 ` reinette chatre
0 siblings, 1 reply; 3+ messages in thread
From: Ming Lei @ 2009-02-02 14:14 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: Linux-kernel, linux-wireless
Hi,
After applying your patch, following is the dmesg output, so it is the
iwl3945 driver that does not save pci state.
[ 115.012278] ------------[ cut here ]------------
[ 115.012281] WARNING: at drivers/pci/pci-driver.c:370
pci_legacy_suspend+0x85/0xc2()
[ 115.012285] Hardware name: Latitude D630
[ 115.012301] PCI PM: Device state not saved by
iwl3945_pci_suspend+0x0/0x4c [iwl3945]
[ 115.012304] Modules linked in: fuse nfsd lockd nfs_acl auth_rpcgss
exportfs sunrpc ipv6 acpi_cpufreq kvm_intel kvm snd_hda_codec_idt
snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_seq_device snd_pcm_oss
snd_mixer_oss ecb snd_pcm cryptomgr aead snd_timer crypto_blkcipher
snd snd_page_alloc ohci1394 crypto_hash crypto_algapi ch341 ieee1394
usbserial thermal iwl3945 mac80211 led_class lib80211 tg3 processor
i2c_i801 i2c_core sg cfg80211 libphy usbhid battery ac button sr_mod
cdrom evdev dcdbas ata_generic ata_piix libata sd_mod scsi_mod ext3
jbd mbcache uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded:
microcode]
[ 115.012374] Pid: 4163, comm: pm-suspend Not tainted
2.6.29-rc3-00227-gf1dd849-dirty #67
[ 115.012377] Call Trace:
[ 115.012382] [<ffffffff8023d04d>] warn_slowpath+0xb1/0xed
[ 115.012387] [<ffffffff80450b5e>] ? _spin_unlock_irqrestore+0x5c/0x78
[ 115.012390] [<ffffffff80254f08>] ? up+0x34/0x39
[ 115.012394] [<ffffffff80362319>] ? acpi_ut_release_mutex+0x5d/0x61
[ 115.012397] [<ffffffff803584b2>] ? acpi_get_data+0x5e/0x70
[ 115.012400] [<ffffffff80363dd9>] ? acpi_bus_get_device+0x25/0x39
[ 115.012403] [<ffffffff80363e98>] ? acpi_bus_power_manageable+0x11/0x29
[ 115.012406] [<ffffffff803462f7>] ? acpi_pci_power_manageable+0x17/0x19
[ 115.012410] [<ffffffff8033ddfd>] ? pci_set_power_state+0xcc/0x101
[ 115.012418] [<ffffffffa01f28e9>] ? iwl3945_pci_suspend+0x0/0x4c [iwl3945]
[ 115.012422] [<ffffffff803401e6>] pci_legacy_suspend+0x85/0xc2
[ 115.012425] [<ffffffff80340316>] pci_pm_suspend+0x34/0x86
[ 115.012429] [<ffffffff8039d7ce>] pm_op+0x52/0xe5
[ 115.012432] [<ffffffff8039dd78>] device_suspend+0x32a/0x451
[ 115.012436] [<ffffffff80269ec2>] suspend_devices_and_enter+0x3e/0x13a
[ 115.012439] [<ffffffff8026a128>] enter_state+0x110/0x164
[ 115.012442] [<ffffffff8026a233>] state_store+0xb7/0xd7
[ 115.012446] [<ffffffff8032f95f>] kobj_attr_store+0x17/0x19
[ 115.012449] [<ffffffff80307d64>] sysfs_write_file+0xe4/0x119
[ 115.012453] [<ffffffff802baa7a>] vfs_write+0xae/0x137
[ 115.012456] [<ffffffff802babc7>] sys_write+0x47/0x70
[ 115.012459] [<ffffffff8020b73a>] system_call_fastpath+0x16/0x1b
[ 115.012467] ---[ end trace 829828966f6f24dc ]---
2009/2/2 Rafael J. Wysocki <rjw@sisk.pl>:
> On Sunday 01 February 2009, Ming Lei wrote:
>> [ 9861.405683] uhci_hcd 0000:00:1d.1: release dev 2 ep81-INT, period
>> 8, phase 4, 99 us
>> [ 9865.305619] PM: Syncing filesystems ... done.
>> [ 9865.313642] Freezing user space processes ... (elapsed 0.08 seconds) done.
>> [ 9865.402590] Freezing remaining freezable tasks ... (elapsed 0.00
>> seconds) done.
>> [ 9865.403013] Suspending console(s) (use no_console_suspend to debug)
>> [ 9865.407679] usb 7-1.2: usb suspend
>> [ 9865.418277] hub 7-1:1.0: hub_suspend
>> [ 9865.419658] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period
>> 128, phase 0, 12 us
>> [ 9865.420690] usb 7-1: usb suspend
>> [ 9865.431279] ch341 6-2:1.0: forced unbind
>> [ 9865.431956] ch341-uart ttyUSB0: ch341-uart converter now
>> disconnected from ttyUSB0
>> [ 9865.431983] ch341 6-2:1.0: device disconnected
>> [ 9865.432001] usb 6-2: usb suspend
>> [ 9865.444823] usb 6-1: usb suspend
>> [ 9865.455301] sd 2:0:0:0: [sda] Synchronizing SCSI cache
>> [ 9865.520674] sd 2:0:0:0: [sda] Stopping disk
>> [ 9866.014995] usb 2-1: usb suspend
>> [ 9866.025319] hub 7-0:1.0: hub_suspend
>> [ 9866.025332] usb usb7: bus suspend
>> [ 9866.025335] usb usb7: suspend_rh
>> [ 9866.025372] hub 6-0:1.0: hub_suspend
>> [ 9866.025379] usb usb6: bus suspend
>> [ 9866.025380] usb usb6: suspend_rh
>> [ 9866.025438] hub 2-0:1.0: hub_suspend
>> [ 9866.025444] usb usb2: bus suspend
>> [ 9866.025446] ehci_hcd 0000:00:1d.7: suspend root hub
>> [ 9866.578701] serial 00:09: disabled
>> [ 9866.580895] ACPI handle has no context!
>> [ 9866.591279] pci 0000:03:01.0: PCI INT A disabled
>> [ 9866.639663] tg3 0000:09:00.0: PME# enabled
>> [ 9866.661281] ------------[ cut here ]------------
>> [ 9866.661285] WARNING: at drivers/pci/pci-driver.c:368
>> pci_legacy_suspend+0x7b/0xb8()
>> [ 9866.661289] Hardware name: Latitude D630
>> [ 9866.661291] Modules linked in: vfat fat fuse nfsd lockd nfs_acl
>> auth_rpcgss exportfs autofs4 sunrpc ipv6 acpi_cpufreq kvm_intel kvm
>> snd_hda_codec_idt arc4 ecb cryptomgr aead crypto_blkcipher
>> snd_hda_intel snd_hda_codec snd_hwdep snd_seq_device snd_pcm_oss
>> snd_mixer_oss snd_pcm snd_timer ub usb_storage ch341 crypto_hash
>> crypto_algapi usbserial iwl3945 mac80211 led_class lib80211 i2c_i801
>> snd usbhid cfg80211 tg3 ohci1394 snd_page_alloc thermal libphy
>> ieee1394 i2c_core processor sg button battery ac sr_mod cdrom evdev
>> dcdbas ata_generic ata_piix libata sd_mod scsi_mod ext3 jbd mbcache
>> uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: microcode]
>> [ 9866.661370] Pid: 6816, comm: pm-suspend Not tainted
>> 2.6.29-rc3-00227-gf1dd849 #66
>> [ 9866.661372] Call Trace:
>> [ 9866.661377] [<ffffffff8023d04d>] warn_slowpath+0xb1/0xed
>> [ 9866.661383] [<ffffffff80450b5e>] ? _spin_unlock_irqrestore+0x5c/0x78
>> [ 9866.661386] [<ffffffff80254f08>] ? up+0x34/0x39
>> [ 9866.661390] [<ffffffff80362311>] ? acpi_ut_release_mutex+0x5d/0x61
>> [ 9866.661393] [<ffffffff803584aa>] ? acpi_get_data+0x5e/0x70
>> [ 9866.661396] [<ffffffff80363dd1>] ? acpi_bus_get_device+0x25/0x39
>> [ 9866.661399] [<ffffffff80363e90>] ? acpi_bus_power_manageable+0x11/0x29
>> [ 9866.661403] [<ffffffff803462ef>] ? acpi_pci_power_manageable+0x17/0x19
>> [ 9866.661406] [<ffffffff8033ddfd>] ? pci_set_power_state+0xcc/0x101
>> [ 9866.661411] [<ffffffff803401dc>] pci_legacy_suspend+0x7b/0xb8
>> [ 9866.661414] [<ffffffff8034030c>] pci_pm_suspend+0x34/0x86
>> [ 9866.661418] [<ffffffff8039d7c6>] pm_op+0x52/0xe5
>> [ 9866.661420] [<ffffffff8039dd70>] device_suspend+0x32a/0x451
>> [ 9866.661424] [<ffffffff80269ec2>] suspend_devices_and_enter+0x3e/0x13a
>> [ 9866.661428] [<ffffffff8026a128>] enter_state+0x110/0x164
>> [ 9866.661431] [<ffffffff8026a233>] state_store+0xb7/0xd7
>> [ 9866.661435] [<ffffffff8032f95f>] kobj_attr_store+0x17/0x19
>> [ 9866.661438] [<ffffffff80307d64>] sysfs_write_file+0xe4/0x119
>> [ 9866.661442] [<ffffffff802baa7a>] vfs_write+0xae/0x137
>> [ 9866.661445] [<ffffffff802babc7>] sys_write+0x47/0x70
>> [ 9866.661449] [<ffffffff8020b73a>] system_call_fastpath+0x16/0x1b
>> [ 9866.661451] ---[ end trace da0410afb81f3af7 ]---
>
> It seems that one of the PCI drivers put the device into a low power state
> without changing its state (bad).
>
> Can you please retest with the appended patch applied?
>
> Rafael
>
> ---
> From: Rafael J. Wysocki <rjw@sisk.pl>
> Subject: PCI PM: Make warning in pci_legacy_suspend more useful
>
> The warning in pci_legacy_suspend() would be much more useful if it
> printed the name of the function that did the wrong thing. Make it
> do so.
>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> ---
> drivers/pci/pci-driver.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> Index: linux-2.6/drivers/pci/pci-driver.c
> ===================================================================
> --- linux-2.6.orig/drivers/pci/pci-driver.c
> +++ linux-2.6/drivers/pci/pci-driver.c
> @@ -365,7 +365,9 @@ static int pci_legacy_suspend(struct dev
> if (pci_dev->state_saved)
> goto Fixup;
>
> - if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
> + if (WARN_ONCE(pci_dev->current_state != PCI_D0,
> + "PCI PM: Device state not saved by %pF\n",
> + drv->suspend))
> goto Fixup;
> }
>
>
--
Lei Ming
^ permalink raw reply [flat|nested] 3+ messages in thread