Linux wireless drivers development
 help / color / mirror / Atom feed
From: Gabor Juhos <juhosg@openwrt.org>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org, users@rt2x00.serialmonkey.com,
	Gabor Juhos <juhosg@openwrt.org>
Subject: [PATCH v3 01/20] rt2x00: rt2800lib: add MAC register initialization for RT3593
Date: Mon,  8 Jul 2013 16:08:16 +0200	[thread overview]
Message-ID: <1373292515-21332-2-git-send-email-juhosg@openwrt.org> (raw)
In-Reply-To: <1373292515-21332-1-git-send-email-juhosg@openwrt.org>

Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.

Reference:
  NICInitRT3593MacRegisters in chips/rt3593.c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
 drivers/net/wireless/rt2x00/rt2800.h    |    1 +
 drivers/net/wireless/rt2x00/rt2800lib.c |   17 +++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9216834..02bc80d 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -88,6 +88,7 @@
 #define REV_RT3071E			0x0211
 #define REV_RT3090E			0x0211
 #define REV_RT3390E			0x0211
+#define REV_RT3593E			0x0211
 #define REV_RT5390F			0x0502
 #define REV_RT5390R			0x1502
 #define REV_RT5592C			0x0221
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index d325ca2..bfeca29 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3714,6 +3714,23 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	} else if (rt2x00_rt(rt2x00dev, RT3572)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+	} else if (rt2x00_rt(rt2x00dev, RT3593)) {
+		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000402);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+		if (rt2x00_rt_rev_lt(rt2x00dev, RT3593, REV_RT3593E)) {
+			rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1,
+					   &eeprom);
+			if (rt2x00_get_field16(eeprom,
+					       EEPROM_NIC_CONF1_DAC_TEST))
+				rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+						      0x0000001f);
+			else
+				rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+						      0x0000000f);
+		} else {
+			rt2800_register_write(rt2x00dev, TX_SW_CFG2,
+					      0x00000000);
+		}
 	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
 		   rt2x00_rt(rt2x00dev, RT5392) ||
 		   rt2x00_rt(rt2x00dev, RT5592)) {
-- 
1.7.10


  reply	other threads:[~2013-07-08 14:08 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-08 14:08 [PATCH v3 00/20] rt2x00: add experimental support for RT3593 Gabor Juhos
2013-07-08 14:08 ` Gabor Juhos [this message]
2013-07-08 14:08 ` [PATCH v3 02/20] rt2x00: rt2800lib: add BBP register initialization " Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 03/20] rt2x00: rt2800lib: add RFCSR " Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 04/20] rt2x00: rt2800lib: add BBP post " Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 05/20] rt2x00: rt2800lib: add TX power configuration " Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 06/20] rt2x00: rt2800lib: fix BBP1_TX_ANTENNA field configuration for 3T devices Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 07/20] rt2x00: rt2800lib: fix antenna configuration for RT3593 Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 08/20] rt2x00: rt2800lib: add rt2800_txpower_to_dev helper Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 09/20] rt2x00: rt2800lib: fix default TX power values for RT3593 Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 10/20] rt2x00: rt2800lib: introduce rt2800_get_txmixer_gain_{24,5}g helpers Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 11/20] rt2x00: rt2800lib: hardcode TX mixer gain values for RT3593 Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 12/20] rt2x00: rt2800lib: fix LNA_A[12] " Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 13/20] rt2x00: rt2800lib: add default_power3 field for three-chain devices Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 14/20] rt2x00: rt2800lib: add rf_vals for RF3053 Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 15/20] rt2x00: rt2800lib: add channel configuration " Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 16/20] rt2x00: rt2800lib: enable VCO recalibration " Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 17/20] rt2x00: rt2800lib: enable RF3053 support Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 18/20] rt2x00: rt2800lib: enable RT3593 support Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 19/20] rt2x00: rt2800usb: use correct [RT]XWI size for RT3593 Gabor Juhos
2013-07-08 14:08 ` [PATCH v3 20/20] rt2x00: rt2800usb: add USB device ID for Linksys AE3000 Gabor Juhos
2013-07-22 15:48 ` [PATCH v3 00/20] rt2x00: add experimental support for RT3593 Gertjan van Wingerde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373292515-21332-2-git-send-email-juhosg@openwrt.org \
    --to=juhosg@openwrt.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=users@rt2x00.serialmonkey.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox