[PATCH v3 07/20] rt2x00: rt2800lib: fix antenna configuration for RT3593

[Gabor Juhos <juhosg@openwrt.org>]

On the RT3593 chipset, BBP register 86 must be
configured by different values based on the RX
antenna numbers.

Configure this register from the 'rt2800_config_ant'
function.

Based on the Ralink DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.

Reference:
  RT3593_CONFIG_SET_BY_ANTENNA in include/chip/rt3593.h

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
Changes since v2: ---
---
 drivers/net/wireless/rt2x00/rt2800lib.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 1a6a4eb..958215c 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1803,6 +1803,13 @@ void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
 
 	rt2800_bbp_write(rt2x00dev, 3, r3);
 	rt2800_bbp_write(rt2x00dev, 1, r1);
+
+	if (rt2x00_rt(rt2x00dev, RT3593)) {
+		if (ant->rx_chain_num == 1)
+			rt2800_bbp_write(rt2x00dev, 86, 0x00);
+		else
+			rt2800_bbp_write(rt2x00dev, 86, 0x46);
+	}
 }
 EXPORT_SYMBOL_GPL(rt2800_config_ant);
 
-- 
1.7.10