* [RFC/RFT 1/7] rt2x00: allow to specify watchdog interval
2019-04-29 10:54 [RFC/RFT 0/7] rt2800: add experimental watchdog implementation Stanislaw Gruszka
@ 2019-04-29 10:54 ` Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 2/7] rt2800: add helpers for reading dma done index Stanislaw Gruszka
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Stanislaw Gruszka @ 2019-04-29 10:54 UTC (permalink / raw)
To: linux-wireless
Cc: Tomislav Požega, Daniel Golle, Felix Fietkau, Mathias Kresin
Allow subdriver to change watchdog interval by intialize
link->watchdog_interval value before rt2x00link_register().
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 +
drivers/net/wireless/ralink/rt2x00/rt2x00link.c | 13 +++++++++----
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index 4b1744e9fb78..a241efa0a4f5 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -336,6 +336,7 @@ struct link {
* to bring the device/driver back into the desired state.
*/
struct delayed_work watchdog_work;
+ unsigned int watchdog_interval;
/*
* Work structure for scheduling periodic AGC adjustments.
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00link.c b/drivers/net/wireless/ralink/rt2x00/rt2x00link.c
index 2010a7715f21..fcc59553918f 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00link.c
@@ -398,7 +398,7 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev)
rt2x00dev->ops->lib->watchdog)
ieee80211_queue_delayed_work(rt2x00dev->hw,
&link->watchdog_work,
- WATCHDOG_INTERVAL);
+ link->watchdog_interval);
}
void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev)
@@ -424,11 +424,16 @@ static void rt2x00link_watchdog(struct work_struct *work)
if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
ieee80211_queue_delayed_work(rt2x00dev->hw,
&link->watchdog_work,
- WATCHDOG_INTERVAL);
+ link->watchdog_interval);
}
void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
{
- INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog);
- INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner);
+ struct link *link = &rt2x00dev->link;
+
+ INIT_DELAYED_WORK(&link->work, rt2x00link_tuner);
+ INIT_DELAYED_WORK(&link->watchdog_work, rt2x00link_watchdog);
+
+ if (link->watchdog_interval == 0)
+ link->watchdog_interval = WATCHDOG_INTERVAL;
}
--
2.7.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RFC/RFT 2/7] rt2800: add helpers for reading dma done index
2019-04-29 10:54 [RFC/RFT 0/7] rt2800: add experimental watchdog implementation Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 1/7] rt2x00: allow to specify watchdog interval Stanislaw Gruszka
@ 2019-04-29 10:54 ` Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 3/7] rt2800: initial watchdog implementation Stanislaw Gruszka
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Stanislaw Gruszka @ 2019-04-29 10:54 UTC (permalink / raw)
To: linux-wireless
Cc: Tomislav Požega, Daniel Golle, Felix Fietkau, Mathias Kresin
For mmio we do not properlly trace dma done Q_INDEX_DMA_DONE index
for TX queues. That would require implementing INT_SOURCE_CSR_*_DMA_DONE
interrupts, what is rather not worth to do due to adding extra
CPU load (small but still somewhat not necessary otherwise).
We can just read TX DMA done indexes from registers directly. What
will be used by watchdog.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 8 +++++++
drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 31 +++++++++++++++++++++++++
drivers/net/wireless/ralink/rt2x00/rt2800mmio.h | 2 ++
drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 9 +++++++
6 files changed, 52 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
index 0dff2c7b3010..b3e6e15d34e5 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -76,6 +76,7 @@ struct rt2800_ops {
const u8 *data, const size_t len);
int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
__le32 *(*drv_get_txwi)(struct queue_entry *entry);
+ unsigned int (*drv_get_dma_done)(struct data_queue *queue);
};
static inline u32 rt2800_register_read(struct rt2x00_dev *rt2x00dev,
@@ -177,6 +178,13 @@ static inline __le32 *rt2800_drv_get_txwi(struct queue_entry *entry)
return rt2800ops->drv_get_txwi(entry);
}
+static inline unsigned int rt2800_drv_get_dma_done(struct data_queue *queue)
+{
+ const struct rt2800_ops *rt2800ops = queue->rt2x00dev->ops->drv;
+
+ return rt2800ops->drv_get_dma_done(queue);
+}
+
void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
const u8 command, const u8 token,
const u8 arg0, const u8 arg1);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
index ddb88cfeace2..27d2d97c2317 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c
@@ -36,6 +36,37 @@
#include "rt2800lib.h"
#include "rt2800mmio.h"
+unsigned int rt2800mmio_get_dma_done(struct data_queue *queue)
+{
+ struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+ struct queue_entry *entry;
+ int idx, qid;
+
+ switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
+ case QID_AC_BE:
+ case QID_AC_BK:
+ qid = queue->qid;
+ idx = rt2x00mmio_register_read(rt2x00dev, TX_DTX_IDX(qid));
+ break;
+ case QID_MGMT:
+ idx = rt2x00mmio_register_read(rt2x00dev, TX_DTX_IDX(5));
+ break;
+ case QID_RX:
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE);
+ idx = entry->entry_idx;
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ idx = 0;
+ break;
+ }
+
+ return idx;
+}
+EXPORT_SYMBOL_GPL(rt2800mmio_get_dma_done);
+
/*
* TX descriptor initialization
*/
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
index 3a513273f414..fa90e3c29707 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.h
@@ -126,6 +126,8 @@
#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000)
#define RXD_W3_PLCP_RSSI FIELD32(0x00040000)
+unsigned int rt2800mmio_get_dma_done(struct data_queue *queue);
+
/* TX descriptor initialization */
__le32 *rt2800mmio_get_txwi(struct queue_entry *entry);
void rt2800mmio_write_tx_desc(struct queue_entry *entry,
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
index 0291441ac548..f22260dc2eb4 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
@@ -337,6 +337,7 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
.drv_write_firmware = rt2800pci_write_firmware,
.drv_init_registers = rt2800mmio_init_registers,
.drv_get_txwi = rt2800mmio_get_txwi,
+ .drv_get_dma_done = rt2800mmio_get_dma_done,
};
static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
index 9c74be82e2be..5c4a745a7489 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -183,6 +183,7 @@ static const struct rt2800_ops rt2800soc_rt2800_ops = {
.drv_write_firmware = rt2800soc_write_firmware,
.drv_init_registers = rt2800mmio_init_registers,
.drv_get_txwi = rt2800mmio_get_txwi,
+ .drv_get_dma_done = rt2800mmio_get_dma_done,
};
static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
index 19eabf16147b..1ec9b1eebedb 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
@@ -406,6 +406,14 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
return retval;
}
+static unsigned int rt2800usb_get_dma_done(struct data_queue *queue)
+{
+ struct queue_entry *entry;
+
+ entry = rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE);
+ return entry->entry_idx;
+}
+
/*
* TX descriptor initialization
*/
@@ -688,6 +696,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = {
.drv_write_firmware = rt2800usb_write_firmware,
.drv_init_registers = rt2800usb_init_registers,
.drv_get_txwi = rt2800usb_get_txwi,
+ .drv_get_dma_done = rt2800usb_get_dma_done,
};
static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
--
2.7.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RFC/RFT 3/7] rt2800: initial watchdog implementation
2019-04-29 10:54 [RFC/RFT 0/7] rt2800: add experimental watchdog implementation Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 1/7] rt2x00: allow to specify watchdog interval Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 2/7] rt2800: add helpers for reading dma done index Stanislaw Gruszka
@ 2019-04-29 10:54 ` Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 4/7] rt2800: add pre_reset_hw callback Stanislaw Gruszka
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Stanislaw Gruszka @ 2019-04-29 10:54 UTC (permalink / raw)
To: linux-wireless
Cc: Tomislav Požega, Daniel Golle, Felix Fietkau, Mathias Kresin
Add watchdog for rt2800 devices. For now it only detect hung
and print error.
[Note: I verified that printing messages from process context is
fine on MT7620 (WT3020) platform that have problem when printk
is called from interrupt context].
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 56 ++++++++++++++++++++++++
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 2 +
drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 6 +++
6 files changed, 67 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 0e8e96075554..7696e3c087ef 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -1215,6 +1215,60 @@ void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_txdone_nostatus);
+static int rt2800_check_hung(struct data_queue *queue)
+{
+ unsigned int cur_idx = rt2800_drv_get_dma_done(queue);
+
+ if (queue->wd_idx != cur_idx)
+ queue->wd_count = 0;
+ else
+ queue->wd_count++;
+
+ return queue->wd_count > 16;
+}
+
+void rt2800_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+ struct data_queue *queue;
+ bool hung_tx = false;
+ bool hung_rx = false;
+
+ if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
+ return;
+
+ queue_for_each(rt2x00dev, queue) {
+ switch (queue->qid) {
+ case QID_AC_VO:
+ case QID_AC_VI:
+ case QID_AC_BE:
+ case QID_AC_BK:
+ case QID_MGMT:
+ if (rt2x00queue_empty(queue))
+ continue;
+ hung_tx = rt2800_check_hung(queue);
+ break;
+ case QID_RX:
+ /* For station mode we should reactive at least
+ * beacons. TODO: need to find good way detect
+ * RX hung for AP mode.
+ */
+ if (rt2x00dev->intf_sta_count == 0)
+ continue;
+ hung_rx = rt2800_check_hung(queue);
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (hung_tx)
+ rt2x00_warn(rt2x00dev, "Watchdog TX hung detected\n");
+
+ if (hung_rx)
+ rt2x00_warn(rt2x00dev, "Watchdog RX hung detected\n");
+}
+EXPORT_SYMBOL_GPL(rt2800_watchdog);
+
static unsigned int rt2800_hw_beacon_base(struct rt2x00_dev *rt2x00dev,
unsigned int index)
{
@@ -10214,6 +10268,8 @@ int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
}
+ rt2x00dev->link.watchdog_interval = msecs_to_jiffies(100);
+
/*
* Set the rssi offset.
*/
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
index b3e6e15d34e5..058cc61884b0 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -207,6 +207,8 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev);
void rt2800_txdone_nostatus(struct rt2x00_dev *rt2x00dev);
bool rt2800_txstatus_timeout(struct rt2x00_dev *rt2x00dev);
+void rt2800_watchdog(struct rt2x00_dev *rt2x00dev);
+
void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
void rt2800_clear_beacon(struct queue_entry *entry);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
index f22260dc2eb4..8ce6c45dbf7d 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
@@ -362,6 +362,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800mmio_start_queue,
.kick_queue = rt2800mmio_kick_queue,
.stop_queue = rt2800mmio_stop_queue,
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
index 5c4a745a7489..30e4b578ab67 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -208,6 +208,7 @@ static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800mmio_start_queue,
.kick_queue = rt2800mmio_kick_queue,
.stop_queue = rt2800mmio_stop_queue,
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
index 1ec9b1eebedb..3966f97c9e47 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
@@ -714,6 +714,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.link_tuner = rt2800_link_tuner,
.gain_calibration = rt2800_gain_calibration,
.vco_calibration = rt2800_vco_calibration,
+ .watchdog = rt2800_watchdog,
.start_queue = rt2800usb_start_queue,
.kick_queue = rt2x00usb_kick_queue,
.stop_queue = rt2800usb_stop_queue,
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
index a15bae29917b..32ccc819bbf0 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h
@@ -449,6 +449,9 @@ enum data_queue_flags {
* @length: Number of frames in queue.
* @index: Index pointers to entry positions in the queue,
* use &enum queue_index to get a specific index field.
+ * @wd_count: watchdog counter number of times entry does change
+ * in the queue
+ * @wd_idx: index of queue entry saved by watchdog
* @txop: maximum burst time.
* @aifs: The aifs value for outgoing frames (field ignored in RX queue).
* @cw_min: The cw min value for outgoing frames (field ignored in RX queue).
@@ -476,6 +479,9 @@ struct data_queue {
unsigned short length;
unsigned short index[Q_INDEX_MAX];
+ unsigned short wd_count;
+ unsigned int wd_idx;
+
unsigned short txop;
unsigned short aifs;
unsigned short cw_min;
--
2.7.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RFC/RFT 4/7] rt2800: add pre_reset_hw callback
2019-04-29 10:54 [RFC/RFT 0/7] rt2800: add experimental watchdog implementation Stanislaw Gruszka
` (2 preceding siblings ...)
2019-04-29 10:54 ` [RFC/RFT 3/7] rt2800: initial watchdog implementation Stanislaw Gruszka
@ 2019-04-29 10:54 ` Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 5/7] rt2800: do not nullify initialization vector data Stanislaw Gruszka
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Stanislaw Gruszka @ 2019-04-29 10:54 UTC (permalink / raw)
To: linux-wireless
Cc: Tomislav Požega, Daniel Golle, Felix Fietkau, Mathias Kresin
Add routine to cleanup interfaces data before hw reset as
ieee80211_restart_hw() will do setup interfaces again.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 19 +++++++++++++++++++
drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 1 +
drivers/net/wireless/ralink/rt2x00/rt2800pci.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2800soc.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 1 +
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 +
6 files changed, 24 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 7696e3c087ef..9a49bb44197c 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -1846,6 +1846,25 @@ int rt2800_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
}
EXPORT_SYMBOL_GPL(rt2800_sta_remove);
+void rt2800_pre_reset_hw(struct rt2x00_dev *rt2x00dev)
+{
+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
+ struct data_queue *queue = rt2x00dev->bcn;
+ struct queue_entry *entry;
+ int i, wcid;
+
+ for (wcid = WCID_START; wcid < WCID_END; wcid++) {
+ drv_data->wcid_to_sta[wcid - WCID_START] = NULL;
+ __clear_bit(wcid - WCID_START, drv_data->sta_ids);
+ }
+
+ for (i = 0; i < queue->limit; i++) {
+ entry = &queue->entries[i];
+ clear_bit(ENTRY_BCN_ASSIGNED, &entry->flags);
+ }
+}
+EXPORT_SYMBOL_GPL(rt2800_pre_reset_hw);
+
void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
index 058cc61884b0..001b46375f26 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h
@@ -267,5 +267,6 @@ void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev);
void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev,
unsigned short *txwi_size,
unsigned short *rxwi_size);
+void rt2800_pre_reset_hw(struct rt2x00_dev *rt2x00dev);
#endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
index 8ce6c45dbf7d..8836091f1205 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800pci.c
@@ -379,6 +379,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
.config_erp = rt2800_config_erp,
.config_ant = rt2800_config_ant,
.config = rt2800_config,
+ .pre_reset_hw = rt2800_pre_reset_hw,
};
static const struct rt2x00_ops rt2800pci_ops = {
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
index 30e4b578ab67..8f8233c0b73b 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800soc.c
@@ -225,6 +225,7 @@ static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
.config_erp = rt2800_config_erp,
.config_ant = rt2800_config_ant,
.config = rt2800_config,
+ .pre_reset_hw = rt2800_pre_reset_hw,
};
static const struct rt2x00_ops rt2800soc_ops = {
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
index 3966f97c9e47..3e90e7224750 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c
@@ -733,6 +733,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
.config_erp = rt2800_config_erp,
.config_ant = rt2800_config_ant,
.config = rt2800_config,
+ .pre_reset_hw = rt2800_pre_reset_hw,
};
static void rt2800usb_queue_init(struct data_queue *queue)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index a241efa0a4f5..cdf496c55b9d 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -627,6 +627,7 @@ struct rt2x00lib_ops {
void (*config) (struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int changed_flags);
+ void (*pre_reset_hw) (struct rt2x00_dev *rt2x00dev);
int (*sta_add) (struct rt2x00_dev *rt2x00dev,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
--
2.7.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RFC/RFT 5/7] rt2800: do not nullify initialization vector data
2019-04-29 10:54 [RFC/RFT 0/7] rt2800: add experimental watchdog implementation Stanislaw Gruszka
` (3 preceding siblings ...)
2019-04-29 10:54 ` [RFC/RFT 4/7] rt2800: add pre_reset_hw callback Stanislaw Gruszka
@ 2019-04-29 10:54 ` Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 6/7] rt2x00: add restart hw Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 7/7] rt2800: do not enable watchdog by default Stanislaw Gruszka
6 siblings, 0 replies; 9+ messages in thread
From: Stanislaw Gruszka @ 2019-04-29 10:54 UTC (permalink / raw)
To: linux-wireless
Cc: Tomislav Požega, Daniel Golle, Felix Fietkau, Mathias Kresin
If we restart hw we should keep existing IV (initialization vector)
otherwise HW encryption will be broken after restart.
Also fix some coding style issues on the way.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 9a49bb44197c..4a2e15b5aba4 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -1650,14 +1650,15 @@ static void rt2800_config_wcid_attr_cipher(struct rt2x00_dev *rt2x00dev,
offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
- memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+ rt2800_register_multiread(rt2x00dev, offset,
+ &iveiv_entry, sizeof(iveiv_entry));
if ((crypto->cipher == CIPHER_TKIP) ||
(crypto->cipher == CIPHER_TKIP_NO_MIC) ||
(crypto->cipher == CIPHER_AES))
iveiv_entry.iv[3] |= 0x20;
iveiv_entry.iv[3] |= key->keyidx << 6;
rt2800_register_multiwrite(rt2x00dev, offset,
- &iveiv_entry, sizeof(iveiv_entry));
+ &iveiv_entry, sizeof(iveiv_entry));
}
int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
@@ -6082,13 +6083,11 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
* ASIC will keep garbage value after boot, clear encryption keys.
*/
for (i = 0; i < 4; i++)
- rt2800_register_write(rt2x00dev,
- SHARED_KEY_MODE_ENTRY(i), 0);
+ rt2800_register_write(rt2x00dev, SHARED_KEY_MODE_ENTRY(i), 0);
for (i = 0; i < 256; i++) {
rt2800_config_wcid(rt2x00dev, NULL, i);
rt2800_delete_wcid_attr(rt2x00dev, i);
- rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
}
/*
--
2.7.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RFC/RFT 6/7] rt2x00: add restart hw
2019-04-29 10:54 [RFC/RFT 0/7] rt2800: add experimental watchdog implementation Stanislaw Gruszka
` (4 preceding siblings ...)
2019-04-29 10:54 ` [RFC/RFT 5/7] rt2800: do not nullify initialization vector data Stanislaw Gruszka
@ 2019-04-29 10:54 ` Stanislaw Gruszka
2019-04-29 10:54 ` [RFC/RFT 7/7] rt2800: do not enable watchdog by default Stanislaw Gruszka
6 siblings, 0 replies; 9+ messages in thread
From: Stanislaw Gruszka @ 2019-04-29 10:54 UTC (permalink / raw)
To: linux-wireless
Cc: Tomislav Požega, Daniel Golle, Felix Fietkau, Mathias Kresin
Add ieee80211_restart_hw() to watchdog and debugfs file for testing
if restart works as expected.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 4 +++
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 7 +++++
drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 35 ++++++++++++++++++++++++
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 10 +++++--
4 files changed, 54 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 4a2e15b5aba4..7d488fa8ef05 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -1266,6 +1266,9 @@ void rt2800_watchdog(struct rt2x00_dev *rt2x00dev)
if (hung_rx)
rt2x00_warn(rt2x00dev, "Watchdog RX hung detected\n");
+
+ if (hung_tx || hung_rx)
+ ieee80211_restart_hw(rt2x00dev->hw);
}
EXPORT_SYMBOL_GPL(rt2800_watchdog);
@@ -10286,6 +10289,7 @@ int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
}
+ __set_bit(CAPABILITY_RESTART_HW, &rt2x00dev->cap_flags);
rt2x00dev->link.watchdog_interval = msecs_to_jiffies(100);
/*
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index cdf496c55b9d..1d7eaa9ecffb 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -724,6 +724,7 @@ enum rt2x00_capability_flags {
CAPABILITY_VCO_RECALIBRATION,
CAPABILITY_EXTERNAL_PA_TX0,
CAPABILITY_EXTERNAL_PA_TX1,
+ CAPABILITY_RESTART_HW,
};
/*
@@ -1281,6 +1282,12 @@ rt2x00_has_cap_vco_recalibration(struct rt2x00_dev *rt2x00dev)
return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_VCO_RECALIBRATION);
}
+static inline bool
+rt2x00_has_cap_restart_hw(struct rt2x00_dev *rt2x00dev)
+{
+ return rt2x00_has_cap_flag(rt2x00dev, CAPABILITY_RESTART_HW);
+}
+
/**
* rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
* @entry: Pointer to &struct queue_entry
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
index 05a2e8da412c..860a19cae3e5 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c
@@ -63,6 +63,7 @@ struct rt2x00debug_intf {
* - chipset file
* - device state flags file
* - device capability flags file
+ * - hardware restart file
* - register folder
* - csr offset/value files
* - eeprom offset/value files
@@ -79,6 +80,7 @@ struct rt2x00debug_intf {
struct dentry *chipset_entry;
struct dentry *dev_flags;
struct dentry *cap_flags;
+ struct dentry *restart_hw;
struct dentry *register_folder;
struct dentry *csr_off_entry;
struct dentry *csr_val_entry;
@@ -577,6 +579,34 @@ static const struct file_operations rt2x00debug_fop_cap_flags = {
.llseek = default_llseek,
};
+static ssize_t rt2x00debug_write_restart_hw(struct file *file,
+ const char __user *buf,
+ size_t length,
+ loff_t *offset)
+{
+ struct rt2x00debug_intf *intf = file->private_data;
+ struct rt2x00_dev *rt2x00dev = intf->rt2x00dev;
+ static unsigned long last_reset;
+
+ if (!rt2x00_has_cap_restart_hw(rt2x00dev))
+ return -EOPNOTSUPP;
+
+ if (time_before(jiffies, last_reset + msecs_to_jiffies(2000)))
+ return -EBUSY;
+
+ last_reset = jiffies;
+
+ ieee80211_restart_hw(rt2x00dev->hw);
+ return length;
+}
+
+static const struct file_operations rt2x00debug_restart_hw = {
+ .owner = THIS_MODULE,
+ .write = rt2x00debug_write_restart_hw,
+ .open = simple_open,
+ .llseek = generic_file_llseek,
+};
+
static struct dentry *rt2x00debug_create_file_driver(const char *name,
struct rt2x00debug_intf
*intf,
@@ -672,6 +702,10 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
intf->driver_folder, intf,
&rt2x00debug_fop_cap_flags);
+ intf->restart_hw = debugfs_create_file("restart_hw", 0200,
+ intf->driver_folder, intf,
+ &rt2x00debug_restart_hw);
+
intf->register_folder =
debugfs_create_dir("register", intf->driver_folder);
@@ -753,6 +787,7 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
debugfs_remove(intf->csr_off_entry);
debugfs_remove(intf->register_folder);
debugfs_remove(intf->dev_flags);
+ debugfs_remove(intf->restart_hw);
debugfs_remove(intf->cap_flags);
debugfs_remove(intf->chipset_entry);
debugfs_remove(intf->driver_entry);
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 357c0941aaad..93ab4d089b21 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1269,8 +1269,14 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
{
int retval;
- if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
- return 0;
+ if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) {
+ /*
+ * This is special case for ieee80211_restart_hw(), otherwise
+ * mac80211 never call start() two times in row without stop();
+ */
+ rt2x00dev->ops->lib->pre_reset_hw(rt2x00dev);
+ rt2x00lib_stop(rt2x00dev);
+ }
/*
* If this is the first interface which is added,
--
2.7.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* [RFC/RFT 7/7] rt2800: do not enable watchdog by default
2019-04-29 10:54 [RFC/RFT 0/7] rt2800: add experimental watchdog implementation Stanislaw Gruszka
` (5 preceding siblings ...)
2019-04-29 10:54 ` [RFC/RFT 6/7] rt2x00: add restart hw Stanislaw Gruszka
@ 2019-04-29 10:54 ` Stanislaw Gruszka
2019-04-30 13:25 ` Kalle Valo
6 siblings, 1 reply; 9+ messages in thread
From: Stanislaw Gruszka @ 2019-04-29 10:54 UTC (permalink / raw)
To: linux-wireless
Cc: Tomislav Požega, Daniel Golle, Felix Fietkau, Mathias Kresin
Make watchdog disabled by default and add module parameter to enable it.
User will have to create file in /etc/modprobe.d/ with
options rt2800lib watchdog=1
to enable the watchdog or load "rt2800lib watchdog=1" module manually
before loading rt2800{soc,pci,usb} module.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 12 ++++++++++--
drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 +
drivers/net/wireless/ralink/rt2x00/rt2x00link.c | 2 +-
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 7d488fa8ef05..0de7d9b509bc 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -41,6 +41,10 @@
#include "rt2800lib.h"
#include "rt2800.h"
+static bool modparam_watchdog;
+module_param_named(watchdog, modparam_watchdog, bool, S_IRUGO);
+MODULE_PARM_DESC(watchdog, "Enable watchdog.");
+
/*
* Register access.
* All access to the CSR registers will go through the methods
@@ -10289,8 +10293,12 @@ int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
}
- __set_bit(CAPABILITY_RESTART_HW, &rt2x00dev->cap_flags);
- rt2x00dev->link.watchdog_interval = msecs_to_jiffies(100);
+ if (modparam_watchdog) {
+ __set_bit(CAPABILITY_RESTART_HW, &rt2x00dev->cap_flags);
+ rt2x00dev->link.watchdog_interval = msecs_to_jiffies(100);
+ } else {
+ rt2x00dev->link.watchdog_disabled = true;
+ }
/*
* Set the rssi offset.
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00.h b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
index 1d7eaa9ecffb..c76d41272b03 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h
@@ -337,6 +337,7 @@ struct link {
*/
struct delayed_work watchdog_work;
unsigned int watchdog_interval;
+ bool watchdog_disabled;
/*
* Work structure for scheduling periodic AGC adjustments.
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00link.c b/drivers/net/wireless/ralink/rt2x00/rt2x00link.c
index fcc59553918f..db4b164ac848 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00link.c
@@ -395,7 +395,7 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev)
struct link *link = &rt2x00dev->link;
if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
- rt2x00dev->ops->lib->watchdog)
+ rt2x00dev->ops->lib->watchdog && !link->watchdog_disabled)
ieee80211_queue_delayed_work(rt2x00dev->hw,
&link->watchdog_work,
link->watchdog_interval);
--
2.7.5
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [RFC/RFT 7/7] rt2800: do not enable watchdog by default
2019-04-29 10:54 ` [RFC/RFT 7/7] rt2800: do not enable watchdog by default Stanislaw Gruszka
@ 2019-04-30 13:25 ` Kalle Valo
0 siblings, 0 replies; 9+ messages in thread
From: Kalle Valo @ 2019-04-30 13:25 UTC (permalink / raw)
To: Stanislaw Gruszka
Cc: linux-wireless, Tomislav Požega, Daniel Golle, Felix Fietkau,
Mathias Kresin
Stanislaw Gruszka <sgruszka@redhat.com> writes:
> Make watchdog disabled by default and add module parameter to enable it.
>
> User will have to create file in /etc/modprobe.d/ with
>
> options rt2800lib watchdog=1
>
> to enable the watchdog or load "rt2800lib watchdog=1" module manually
> before loading rt2800{soc,pci,usb} module.
>
> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
[...]
> +static bool modparam_watchdog;
> +module_param_named(watchdog, modparam_watchdog, bool, S_IRUGO);
> +MODULE_PARM_DESC(watchdog, "Enable watchdog.");
You could describe a bit more what this watchdog does and that it's in
driver (or at least I assume so).
--
Kalle Valo
^ permalink raw reply [flat|nested] 9+ messages in thread