From: Sujith <Sujith.Manoharan@atheros.com>
To: <linville@tuxdriver.com>
Cc: <linux-wireless@vger.kernel.org>, <Jouni.Malinen@Atheros.com>,
<Luis.Rodriguez@Atheros.com>, <johannes@sipsolutions.net>
Subject: [PATCH 16/16] mac80211: Add a new event in ieee80211_ampdu_mlme_action
Date: Wed, 29 Oct 2008 10:19:28 +0530 [thread overview]
Message-ID: <18695.60248.383916.563413@gargle.gargle.HOWL> (raw)
Send a notification to the driver on succesful
reception of an ADDBA response, add IEEE80211_AMPDU_TX_RESUME
for this purpose.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
---
drivers/net/wireless/ath9k/core.h | 1 +
drivers/net/wireless/ath9k/main.c | 3 +++
drivers/net/wireless/ath9k/xmit.c | 19 +++++++++++++++++++
include/net/mac80211.h | 2 ++
net/mac80211/ht.c | 10 +++++++++-
5 files changed, 34 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 5b17e88..69e8d3e 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -581,6 +581,7 @@ void ath_tx_aggr_teardown(struct ath_softc *sc,
int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
u16 tid, u16 *ssn);
int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
+void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath_newassoc(struct ath_softc *sc,
struct ath_node *node, int isnew, int isuapsd);
void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta);
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 376c530..5d07952 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1484,6 +1484,9 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
break;
+ case IEEE80211_AMPDU_TX_RESUME:
+ ath_tx_aggr_resume(sc, sta, tid);
+ break;
default:
DPRINTF(sc, ATH_DBG_FATAL,
"%s: Unknown AMPDU action\n", __func__);
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 7e6f4e5..fe386b6 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -2371,6 +2371,25 @@ int ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
return 0;
}
+/* Resume tx aggregation */
+
+void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
+{
+ struct ath_atx_tid *txtid;
+ struct ath_node *an;
+
+ an = (struct ath_node *)sta->drv_priv;
+
+ if (sc->sc_flags & SC_OP_TXAGGR) {
+ txtid = ATH_AN_2_TID(an, tid);
+ txtid->baw_size =
+ IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor;
+ txtid->state |= AGGR_ADDBA_COMPLETE;
+ txtid->state &= ~AGGR_ADDBA_PROGRESS;
+ ath_tx_resume_tid(sc, txtid);
+ }
+}
+
/*
* Performs transmit side cleanup when TID changes from aggregated to
* unaggregated.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0b983be..4051f0a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1136,12 +1136,14 @@ enum ieee80211_filter_flags {
* @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
* @IEEE80211_AMPDU_TX_START: start Tx aggregation
* @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
+ * @IEEE80211_AMPDU_TX_RESUME: resume TX aggregation
*/
enum ieee80211_ampdu_mlme_action {
IEEE80211_AMPDU_RX_START,
IEEE80211_AMPDU_RX_STOP,
IEEE80211_AMPDU_TX_START,
IEEE80211_AMPDU_TX_STOP,
+ IEEE80211_AMPDU_TX_RESUME,
};
/**
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 1453cb5..0ffbe12 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -995,7 +995,7 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
{
struct ieee80211_hw *hw = &local->hw;
u16 capab;
- u16 tid;
+ u16 tid, start_seq_num;
u8 *state;
capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
@@ -1032,6 +1032,14 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
local->hw.ampdu_queues)
ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
+ if (local->ops->ampdu_action) {
+ (void)local->ops->ampdu_action(hw,
+ IEEE80211_AMPDU_TX_RESUME,
+ &sta->sta, tid, &start_seq_num);
+ }
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "Resuming TX aggregation for tid %d\n", tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
spin_unlock_bh(&sta->lock);
} else {
sta->ampdu_mlme.addba_req_num[tid]++;
--
1.6.0.3
next reply other threads:[~2008-10-29 4:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-29 4:49 Sujith [this message]
2008-10-29 9:11 ` [PATCH 16/16] mac80211: Add a new event in ieee80211_ampdu_mlme_action Tomas Winkler
2008-10-29 9:16 ` Sujith
2008-10-29 9:26 ` Tomas Winkler
2008-10-29 9:28 ` Sujith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18695.60248.383916.563413@gargle.gargle.HOWL \
--to=sujith.manoharan@atheros.com \
--cc=Jouni.Malinen@Atheros.com \
--cc=Luis.Rodriguez@Atheros.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox